



Salt indicator. It is always off while the programme operates.

End indicator.
Programme1) Degree of soil
Heavy soil Crockery, cut- lery, pots and pans
Prewash Wash 70 °C Rinses Dry
Normal soil Crockery and cutlery
Prewash Wash 65 °C Rinses Dry
Fresh soil Crockery and cutlery
Wash 65 °C Rinse
30 0.8 8
Prewash Wash 50 °C Rinses Dry
168 1.01 12.4
Normal or light soil Delicate crock- ery and glass- ware
Wash 45 °C Rinses Dry
1) The pressure and the temperature of the water, the variations of the mains supply, the options and the quantity of dishes can change the programme duration and the consumption values. 2) With this programme you can wash a load with fresh soil. It gives good washing results in a short time. 3) With this programme you have the most efficient use of water and energy consumption for crockery and cutlery with normal soil. (This is the standard programme for test institutes).
Information for test institutes For all the necessary information for test performance. send an email to: info.test@dishwasher-production.com Write down the product number (PNC) that is on the rating plate.
Activate or deactivate the Multitab op- tion before the start of a programme. You cannot activate or deactivate the option while a programme operates.
How to activate the Multitab option 1. Press and hold, at the same time,
and until the Multitab indicator comes on.
Multitab Activate this option only when you use the combi detergent tablets. This option deactivates the use of rinse aid and salt. The related indicators stay off. The programme duration can increase.
If you stop to use the combi detergent tablets, before you start to use separately detergent, rinse aid and dishwasher salt, do these steps: 1. Set the water softener to the highest level. 2. Make sure that the salt container and the rinse aid dispenser are full.

Acoustic signals The acoustic signals operate when the ap- pliance has a malfunction, when the adjust- ment of the level of the water softener oc- curs and when the programme is comple- ted. By default, the acoustic signals are on, but it is possible to deactivate them.
How to activate the acoustic signals 1. Refer to ‘How to deactivate the acoustic signals’, step (1) through (3). 2. Press button , • The indicators of buttons and
How to deactivate the acoustic signals 1. Press the on/off button to activate the appliance. Make sure that the appliance is in setting mode, refer to “Setting and starting a programme”. 2. Press and hold, at the same time, but-
ton and button until the
indicators of buttons , and
start to flash. 3. Press button . • The indicators of buttons and
go off.
Adjusting the water softener



< 4 < 7 < 0.7 < 5 12)
es + pause + 5 acoustic signals and 5 flashes = level 5. 4. Press button again and again to change the setting. Each time you press the button you select the next level. 5. Deactivate the appliance to confirm the setting.
ton and button until the
indicators of buttons , and
start to flash. 3. Press button . • The indicators of buttons and
go off.

Filling the salt container

Filling the rinse aid dispenser

C D 1. Turn the cap (C) counterclockwise to open the rinse aid dispenser. 2. Fill the rinse aid dispenser (A), no more than the mark 'max'. 3. Remove the spilled rinse aid with an absorbent cloth to prevent too much foam. 4. Put the cap in position and turn it clockwise to close the rinse aid dis- penser.
Fill the rinse aid dispenser when the lens (D) is clear.
You can turn the selector of the re- leased quantity (B) between position 1 (lowest quantity) and position 4 (high- est quantity).

Setting and starting a programme Setting mode For some settings it is necessary that the appliance is in setting mode. The appliance is in setting mode when, af- ter the activation, all the programme indica- tors come on. If the control panel does not show this con- dition, press and hold, at the same time,
Opening the door while the appliance operates If you open the door, the appliance stops. When you close the door, the appliance continues from the point of interruption. Cancelling the delay start while the countdown operates When you cancel the delay start, also the programme is cancelled. 1. Press and hold, at the same time, but-
ton and button until all the programme indicators come on. 2. Set the programme again. Cancelling the programme 1. Press and hold, at the same time, but-
ton and button until all the programme indicators come on.
Make sure that there is detergent in the detergent dispenser before you start a new programme.
At the end of the programme The indicator comes on. 1. Press the on/off button to deactivate the appliance. 2. Close the water tap.
Using the detergent

The water softener Hard water contains a high quantity of min- erals that can cause damage to the appli- ance and bad washing results. The water softener neutralises these minerals. The dishwasher salt keeps the water soft- ener clean and in good conditions. It is im- portant to set the right level of the water softener. This makes sure that the water softener uses the correct quantity of dish- washer salt and water.
Do not use more than the correct quantity of detergent. Refer to the in- structions on the detergent packaging.
Refer to the supplied leaflet with exam- ples of the load of the baskets.
Dirty filters and clogged spray arms de- crease the washing results. Make a check regularly and, if neces- sary, clean them.
Loading the baskets

A2
An incorrect position of the filters can cause bad washing results and dam- age to the appliance.
Cleaning the spray arms Do not remove the spray arms. If the holes in the spray arms are clogged, remove remaining parts of soil with a thin pointed object.
Internal cleaning If you regularly use short duration pro- grammes, these can leave deposits of grease and limescale inside the appliance. To prevent this, we recommend to run long duration programmes at least 2 times per month.
External cleaning Clean the appliance with a moist soft cloth. Only use neutral detergents. Do not use abrasive products, abrasive cleaning pads or solvents.
The appliance does not start or it stops during operation. Before you contact the Service, refer to the information that follows for a solution to the problem.
With some problems, different indica- tors flash continuously or intermittently at the same time to show an alarm code.
Cleaning the filters

The appliance does not fill with water.
The appliance does not drain the water.
The anti-flood device is on.
You cannot activate the appliance. Make sure that the mains plug is connected to the mains socket.
Make sure that there is not a damaged fuse in the fuse box.
The programme does not start. Make sure that the appliance door is closed.
If the delay start is set, cancel the setting or wait for the end of the countdown.
The appliance does not fill with water. Make sure that the water tap is open.
Make sure that the pressure of the water supply is not too low. For this information, contact your local water authority.
Make sure that the water tap is not clogged.
Make sure that the filter in the inlet hose is not clogged.
Make sure that the inlet hose has no kinks or bends.
The appliance does not drain the water. Make sure that the sink spigot is not clogged.
Make sure that the drain hose has no kinks or bends.
The anti-flood device is on. Close the water tap and contact the Service.
After the checks are completed, activate the appliance. The programme continues from the point of interruption. If the problem occurs again, contact the Service. If the display shows other alarm codes, contact the Service.
If the washing and drying results are not satisfactory
Alarm code Problem · Problem Possible solution

activate the rinse aid dispenser and use rinse aid together with the combi deter- gent tablets.
Refer to ‘HINTS AND TIPS’ for other possible causes.
How to activate the rinse aid dispenser 1. Press the on/off button to activate the appliance. Make sure that the appliance is in setting mode, refer to “Setting and starting a programme”. 2. Press and hold, at the same time, but-
ton and button until the
indicators of buttons , and
start to flash.

Dimensions Width / Height / Depth (mm) 596 / 818 - 898 / 555
Water supply pressure Min. / max. (bar / MPa) (0.5 / 0.05 ) / (8 / 0.8 )
Water supply 1) Cold water or hot water2) max. 60 °C
Recycle the materials with the symbol . Put the packaging in applicable containers to recycle it. Help protect the environment and human health and to recycle waste of electrical and electronic appliances. Do not dispose appliances marked with the symbol with
the household waste. Return the product to your local recycling facility or contact your municipal office. • Discard correctly the packaging material. Recycle the materials with the symbol .
Problèmes fréquents, causes probables et solutions.
| Problème | Cause possible | Solution | |
|---|---|---|---|
| You cannot activate the appliance. | Make sure that the mains plug is connected to the mains socket. | p.11 | |
| You cannot activate the appliance. | Make sure that there is not a damaged fuse in the fuse box. | p.11 | |
| The programme does not start. | Make sure that the appliance door is closed. | p.11 | |
| The programme does not start. | If the delay start is set, cancel the setting or wait for the end of the countdown. | p.11 | |
| The appliance does not fill with water. | Make sure that the water tap is open. | p.11 | |
| The appliance does not fill with water. | Make sure that the pressure of the water supply is not too low. For this information, contact your local water authority. | p.11 | |
| The appliance does not fill with water. | Make sure that the water tap is not clogged. | p.11 | |
| The appliance does not fill with water. | Make sure that the filter in the inlet hose is not clogged. | p.11 | |
| The appliance does not fill with water. | Make sure that the inlet hose has no kinks or bends. | p.11 | |
| The appliance does not drain the water. | Make sure that the sink spigot is not clogged. | p.11 | |
| The appliance does not drain the water. | Make sure that the drain hose has no kinks or bends. | p.11 | |
| The anti-flood device is on. | Close the water tap and contact the Service. | p.11 |
Les utilisateurs et notre équipe répondent généralement sous 24 h — et votre question servira aussi aux suivants.
Soyez le premier à poser une question — d'autres utilisateurs ou notre équipe y répondront.