Manuel d'utilisation / d'entretien du produit 9060A MP du fabricant Cabletron Systems
Aller à la page of 32
1 IP Kamera 9060A –MP (Mega Pixels) User Guide IP Kamera 9060A-MP Manual version: 1.00 Date: 2006.08.
2 Caution: Any changes or modifications not approved by the party responsible for compliance could void the user’s authority to operate the equipment.
3 Table of Contents 1. PRODUCT OVERVIEW ............................................................................................... 4 FEATURES ........................................................................................................
4 1. Product Overview IP Kamera 9060A-MP (Mega Pixels) has a built-in a web server which can transfer video & audio via a data network and monitor your home /office / co mmercial facility form any corner of the world.
5 2. Physical Description BOX CONTENT IP Kamera package content ： 1 x IP Kamera 9060A-MP (Mega Pixels) 1X Ceiling mount 1 x RJ 45 internet line 1 xTansformer 5V 1.
6 3. Interface Description Front Panel: 1. Power indicator (LED) 2. Sensor: 1/2 CMOS Rear Panel: 1. Reset ON / OFF ( Left - OFF & Right –ON ) 2. DC Power: 5V, 1.
7 4. Installation Before installation: Before using IP Kamera 9060A-MP, check as follows. Confirm your package content A computer connects with LAN Hardware installation 1. Plug in RJ 45 line to connect 9060A-MP (Mega Pixels) with HUB 2. Connect the HUB into your modem.
8 5. Initialization Set up on Ethernet Click “ipEdit.exe” . Please affirm the power of 9060A-MP (Mega Pixels) had been turn on and the Ethernet connection of RJ45 is correct.
9 A. LOCAL Devices area: IPEDIT will searching all IP Products 9XXXseries in the same local Ethernet, the default name of 9060A-MP (Mega Pixels) is Cam-location, and display the information as select 1. Double click the IP address, it will be covered by dark stripe, its name, and IP will be displayed below.
10 IP 9060A-MP (Mega Pixels) Default static dynamic IP Address is 192.168.0.100. the last digit of IP address (default is 100) can be any number between 1~254, but can not be same as your PC. If using in any PC, just use HUB and type t he 192.168.0.100 in Browser or use “ipedit.
11 B. Internet online devices: By setting the server address in IP server of advanced setting page, user can easily to get the IP address of IP Kamera 9060A-MP on internet by name searching.
12 Work with Yahoo /MSN Messenger 1. Work with Yahoo /MSN Messenger: We use Y ahoo for instance. Select the friend you would like to send your video. For instance, we pick up Yahoo Helper. 2. Choose T1/E1 when system ask y ou about the Internet connecting speed.
13 4. You can type in appointed IP address (No matter Real IP or Dynamic IP) and confirm by click “Add” and choose if reverse the out streaming video. We support: A. Normal B. Flip Vertical C. Flip Horizontal D. Rotate 180 And you can also adjust the color, Brightness, contrast, Hue, Saturation, Sharpness and ETC.
14 6. WEBPAGE FUNCTIONS When your computer configured IP address, you can finish setting through IE browser. Click the picture in the window of IPEdit directly; you can open the web page of IP9060. Login setting General user: Default general ID is guest, Password is password.
15 LiveView setting After 5 minutes, you will get the video of 9060A-MP. If system inquire to download ActiveX please select YES / download Most of upside function key (such as Admin istration Update and ETC) can only be used by Administrator. Image Setting Setting windows is on the left; it’s used to set up image parameter.
16 3. Anti-Flicker: You can get top-quality picture for we had set up the picture condition on the basis of different illumination environment. You can choose environment such as “Out Door”,” indoor 50hz AC illumination” or ” indoor 60hz illumination ”.
17 Advanced quick setting Advanced menu will be display when right cl ick mouse on the image windows, you can set up image, record AVI, record WMV, zoom, motion detect, splits, rotate, set time, and set pictures path.
18 1. Image: parameter setting Right click mouse on the motion image, choose “image” can open corresponding windows. Users can adjust Brightness, Contrast, Saturation, Sharpness, Smooth and Awb(Auto White Balance). Click “rotate” will circumrotate the image.
19 If select “ For playback on most pocket PCs: record smaller file than select to ““ For local playback” 4. Zoom Right click mouse on the motion image and choose “zoom”. Users use mouse to draw a frame round to select image, let go will be amplificatory to old image, when right click mouse again, the image will revert.
20 5. Motion detect In this page, you can enable Motion detection function and setup the pictures saving direction: in PC / by e-mail / save in Ftp. The r esolution of detect pictures is 1600x 1200. Use this function need to enabled Event of Event Tr igger page first (click submit to save setting after select).
21 5. Splits: split video in to multi screen. 1 / 4 / 9 / 16 6. Rotate: Adjust the pictures: 180 7.Set time: Setup by same as local PC or NTP se rvere.
22 8. Set pictures path: Fast select the direction for SNAP and Motion detection. Network setting This menu can set up or change the assignment of IP CAM network connections. There is three chooses: STATIC, DHCP, and PPPOE. A. STATIC work for both real and dynamic IP address.
23 A .Set up STATIC mode, steps: The IP address of IP camera 9060A-SL should in t he same subnet with your PC, subnet mask, and default gateway mast same as 9060A-SL also. For example, the default IP addr ess of 9060A-SL is 192.168.0.100, 1.Type the new IP address, Submask, Gate way in the relevant text windows.
24 After amend the setting please do cli ck “Submit “to save the setting. B. Set up DHCP mode, steps: 1.Click DHCP, and then click “Submit” 2.Click “Reboot”, its need to wait for 15-20 seconds to enable again. 3.Use Search Tools; click Update to find IP CAM.
25 1.Click PPPOE 2.Type User Name and Password, Click ”Submit” 3. Click “Reboot”, its need to wait for 15-20 seconds to enable again. 4. Use Search Tools “ IPEdit ”; click Update to get IP address. If still see same IP address, please click PPPOE in IPEDIT, submit and then click update.
26 D. HTTP Server: Appoint port number of HTTP, default is 80. HTTP port setting can help use More than one IP Kamera for customer had only one real IP.
27 B. FTP (File Transfer Protocol) Steps: 1. Fill in Ftp Server (IP/ Host), Account ID, Password, and Ftp mode. 2. Click “Submit” to save setting. C. DDNS (Dynamic Domain Name Server) Steps: Before use DDNS service, please create your own account in Websitehttp://www.
28 Administration setting By this functions. User can set 9060A-MP (M ega Pixels)’s name, Administration’s account, general user’s account and black list of IP address. When there is two or more 9060A -MP (Mega Pixels), we need to distinguish every one of them.
29 Event Trigger Event trigger: In this page, users can select to ENABLE one or two Motion Detect functions and the way to transfer detect pictures: Save in PC, Send by E-mail, Save in Ftp server. Click “Submit” after type account/passwor d to relevant text windows.
30 Advance (Timer schedule) setting A. Timer Schedule : users can choose appointed peri od (EVERYDAY) for SNAP (take pictures every setting interval) and Motion detection. Format: Hour Minute: Hour Minutes (From H/M to H/M) After select time please click” Add ” then the appointed time will show on bar.
31 Update setting By update functions, user cans online updat e 9060 firmware to get more functions; 1. Press “browse” key to chose new BIN file. 2. Press ”Submit” key to upload, it will holding 7-10 secs (100M Ethernet) 3. The windows will showing “waits syst em Reboot”, it means upload finished.
32 Q 2: The Web Kamera does not launch? A: Upgrade Intern et Explorer to 5.0 or higher vers ion and che ck If the subnet is same as your P C. Please refer page 9 for the setting. Sometimes the web camera base cannot bring 'index.html' from the web Camera when the Internet Explorer version is fewer than 4.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Cabletron Systems 9060A MP c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Cabletron Systems 9060A MP - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Cabletron Systems 9060A MP, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Cabletron Systems 9060A MP va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Cabletron Systems 9060A MP, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Cabletron Systems 9060A MP.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Cabletron Systems 9060A MP. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Cabletron Systems 9060A MP ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
