Manuel d'utilisation / d'entretien du produit KX-HCM8 du fabricant Panasonic
Aller à la page of 118
Operating Instructions Please read this manual before using and sa ve this manual for future ref erence. Netw ork Camera Panasonic Netw ork Camera Site: http://www .
Operating Inst ructions 2 Introduction Thank you fo r purchasing a Panasonic Netw ork Camera. Check the foll owing items when unpacki ng. For operatio n assistanc e: • Call 1-80 0-272-7033 • Refer t o the Panason ic Network Cam era Site http://ww w.
Operating Instr uct io ns [F or a s si st an c e, pl ea s e ca ll : 1 - 80 0- 27 2- 7 03 3] 3 Tradem arks • Netscape and Netscape Navigator a re either regis tered t rademarks or trademark s of Netsc ape Communi cations Corporati on in the U. S. and other coun tries.
Operating Inst ructions 4 IMPORTANT SAFETY INSTRUCTIONS When usin g this un it, basic sa fety prec autions sho uld alwa ys be follo wed to reduce the risk of fi re, electric shock, or personal in jury. 1. Read and unders tand all instructions . 2. Keep the se instructi ons.
Operating Instr uct io ns [F or a s si st an c e, pl ea s e ca ll : 1 - 80 0- 27 2- 7 03 3] 5 Table o f Contents 1 Product Introduction ................. .................. .............. ..... 7 1.1 Getting t o Know Network Ca mera .... .............
Operating Inst ructions 6 3.5.6 Top View Imag e ....................... ................. ................ ................. ...............60 3.5.7 Image Transfer ................... ................. ................. ................. .............
Operating Instr uct io ns [F or a s si st an c e, pl ea s e ca ll : 1 - 80 0- 27 2- 7 03 3] 7 Section 1 Product Introduc tion.
Operating Inst ructions 8 1.1 Getting to Know Network Camera 1.1. 1 Main Feat ure s Easy installa tion Setup CD-R OM simp lifies the i nstallati on. Inser t the Se tup C D-ROM a nd aut orun program sh ould star t the appli cation au tomatica lly. This program a utomatic ally finds Ne twork Camera on the network.
Operating Instr uct io ns [F or a s si st an c e, pl ea s e ca ll : 1 - 80 0- 27 2- 7 03 3] 9 Upda te Fi rmwa re If new f irmware is rele ased, yo u can down load the l atest prog ram from Net work Camera Tec hnical Suppo rt Site. Inst allation i s easy and fast.
Operating Inst ructions 10 1.1.2 System Requirements The PC (Pers onal Comp uter) and the n etwork mus t meet the following technical specific ations for Netwo rk Camera to work prope rly. * 1 Network Camera im age is n ot displaye d correctly i n the Netsc ape ® v6.
Operating Instr uct io ns [ F or a s s i s t a n c e, p l e a s e c a l l : 1- 8 0 0 - 2 7 2 - 7 03 3 ] 1 1 1.1.3 Authentication—System Security Feature Authenticatio n window requires you to e nter the admi nistrator/g eneral use r ID and pas sword for se curity.
Operating Inst ructions 12 1.2 Included Accessories The follow ing ite ms are pr ovided w ith Netw ork Came ra. Addit ional p ieces can be ordered by calli ng 1-80 0-332-5368 . Not es • If an y items are m issing , contact the dealer im mediatel y. • The o rder numbe rs listed above ar e subject to change w ithout no tice.
Operating Instr uct io ns [ F or a s s i s t a n c e, p l e a s e c a l l : 1- 8 0 0 - 2 7 2 - 7 03 3 ] 1 3 Setup CD-ROM The setu p program s implifies Network Ca mera inst allation. Adobe ® Acrobat ® Reader 4.05 or lat er enables y ou to see the Opera ting Instructi ons on th e Setup CD-ROM.
Operating Inst ructions 14 1.3 Camera Feature Locations 1.3.1 Front Vi ew Power Indicator Power Indi cator can be controlle d on In dicator Control windo w on page 79 . Power Indica tor blinks in the fo llowing si tuations . • During the Update Firmware.
Operating Instr uct io ns [ F or a s s i s t a n c e, p l e a s e c a l l : 1- 8 0 0 - 2 7 2 - 7 03 3 ] 1 5 1.3. 2 Rea r View Ethernet Indic ator Ethernet In dicator turns on when the network is ac tive. It flic kers when Network Camera is sending and recei ving the dat a.
Operating Inst ructions 16 Section 2 Network Camera Setup.
Operating Instr uct io ns [ F or a s s i s t a n c e, p l e a s e c a l l : 1- 8 0 0 - 2 7 2 - 7 03 3 ] 1 7 2.1 In stallation Procedur e Sel ect th e Net w ork Ca mera c onfi gurat ion ty pe. ( P age 18 —Page 19) Connect Network Camera for installa tion.
Operating Inst ructions 18 2.2 Networ k Camera Configur ation Type Network Came ra can be connected ov er the LAN/Intrane t and the Interne t. Select from the fo ur Network Camera config uration ty pes. Netw ork parameters differ depending on the N etwork Ca mera con figuration type.
Operating Instr uct io ns [ F or a s s i s t a n c e, p l e a s e c a l l : 1- 8 0 0 - 2 7 2 - 7 03 3 ] 1 9 [Type 3] — Internet Direct Connection with a Modem Network C amera can b e installed a lone without PC on the network.
Operating Inst ructions 20 2.3 How to turn on Network Camera for Install ation Connect the DC p lug of the AC adaptor t o the DC I N jack an d a categ ory 5 stra ight/ cross ca ble to the Ethernet port. C onnect the AC plug o f the AC adap tor to the power out let to turn on Network C amera.
Operating Instr uct io ns [ F or a s s i s t a n c e, p l e a s e c a l l : 1- 8 0 0 - 2 7 2 - 7 03 3 ] 2 1 2.4 Network Paramet ers 2.4.1 Preparing the Network P arameters for Network Camera Befo re st artin g to se t up th e net work pa rame ters of Netw ork Cam era, make no te of cor resp o nding networ k par amete r s.
Operating Inst ructions 22 Network Parame ters Table * 1 Many ISP ' s in tentionall y block port numb er 80 to gua rd against network vi ruses. If your ISP block s por t numb er 80, subs tit ute it to an othe r unus ed port numbe r .
Operating Instr uct io ns [ F or a s s i s t a n c e, p l e a s e c a l l : 1- 8 0 0 - 2 7 2 - 7 03 3 ] 2 3 How to refer the ne twork parameters from the PC If you ca nnot get the network par ameters, y ou can refe r to the netwo rk paramet ers except for IP addres s from the PC on the sa me network in the following procedure.
Operating Inst ructions 24 2.4.2 Setting IP Addr ess of the PC in [Type 4] Configuration Type Your PC needs to have a sta tic priv ate IP addr ess to acce ss Netw ork Came ra in [Type 4] configurat ion . 1. Follow the steps be low, appropriate for your op erating system t o open TCP/IP Properties wind ow on the PC.
Operating Instr uct io ns [ F or a s s i s t a n c e, p l e a s e c a l l : 1- 8 0 0 - 2 7 2 - 7 03 3 ] 2 5 2. TCP IP Properti es window appea rs. Set "19 2.168.0.25 0" in the IP address data fiel d and "25 5.255.255. 0" in the S ubnet Mas k data field .
Operating Inst ructions 26 2.5 Proxy Server Setting A proxy se rver may prevent you f rom conne cting di rectly to N etwork Cam era in some cor porate env ironments. Th e web br owser can set up the IP address communi cation wit hout usin g a proxy se rver.
Operating Instr uct io ns [ F or a s s i s t a n c e, p l e a s e c a l l : 1- 8 0 0 - 2 7 2 - 7 03 3 ] 2 7 3. Enter the IP address of Netwo rk Came ra assigned from your ISP o r network adminis trator into the Do not use proxy server for add resses begi nning with data fie ld.
Operating Inst ructions 28 2.6 Simple Installation using the Setup CD-ROM After finishi ng cabling , turn on Network Cam era and insert the Setup C D-ROM in the CD-ROM drive of the PC. Setup C D-ROM sh ould start the appli cation automatic ally. Th is program automat ically f inds Network Camer as on the network.
Operating Instr uct io ns [ F or a s s i s t a n c e, p l e a s e c a l l : 1- 8 0 0 - 2 7 2 - 7 03 3 ] 2 9 3. Click [Network Configuration]. Network Camera List wind ow appears. Setup prog ram finds all N etwork Came ras conne cted on your loc al netwo rk.
Operating Inst ructions 30 4. Select y our target Network Cam era from the l ist as show n in exam ple (A) on Network Cam era List window on page 2 9 and click [S elect] . Configuration window appea rs. Refer to page 21 and page 2 2 and enter the c o rrect n etwork parame ters.
Operating Instr uct io ns [ F or a s s i s t a n c e, p l e a s e c a l l : 1- 8 0 0 - 2 7 2 - 7 03 3 ] 3 1 6. Click [OK] . Refer to pag e 50 for Setup Page (Netwo rk window) .
Operating Inst ructions 32 2.7 Network Came ra Access fr om the Inter net [Type 2] and [Type 3] of the Network Camera configur ation type allow Netw ork Camera t o be access ed from th e Internet.
Operating Instr uct io ns [ F or a s s i s t a n c e, p l e a s e c a l l : 1- 8 0 0 - 2 7 2 - 7 03 3 ] 3 3 Top Page Refer to pag e 37 for Top Pag e. Note When vie wing imag es for the first time in the Interne t Explorer, a pop-up Security Warning wind ow may appe ar.
Operating Inst ructions 34.
Operating Instr uct io ns [ F or a s s i s t a n c e, p l e a s e c a l l : 1- 8 0 0 - 2 7 2 - 7 03 3 ] 3 5 Section 3 Network Camera Scr een and Set up Window.
Operating Inst ructions 36 3.1 Netwo rk Camera F lo w Chart Top Page en ables yo u to acce ss Top View Image scre en (Single C amera/Multi- Camera scr een). Authen tication window can s et pass word for the l ink at (A) . Enter "htt p://IP Address (or URL ) :Port No.
Operating Instr uct io ns [ F or a s s i s t a n c e, p l e a s e c a l l : 1- 8 0 0 - 2 7 2 - 7 03 3 ] 3 7 3.2 Top Page Top Page al lows you to select the Single /Multi-Camera scree n in Motion JPEG or JPEG - R egularly R efresh.
Operating Inst ructions 38 Notes • If a port n umber is specified i n the IP address, " http :// " must precede the IP add ress, othe rwise the p ort number will not be rec ognized. • When vi ewing ima ges for the first time in the Interne t Explorer, a pop- up Security W a rning w indow may app ear.
Operating Instr uct io ns [ F or a s s i s t a n c e, p l e a s e c a l l : 1- 8 0 0 - 2 7 2 - 7 03 3 ] 3 9 ActiveX Controls When viewi ng images for the first ti me in the Internet Ex plorer, a pop-up Security Warning window m ay appea r. The windo w requests your permi ssion to download ActiveX Con trols (OCX fil e) used to di splay M otion JPEG.
Operating Inst ructions 40 3.3 Single Camera Screen Single C am era sc reen ha s a n O p erati on Bar o n t he left. It ca n c han ge the im ag e resolution , the image quality and image siz e. [Viewer] links to the Buffered Image screen. Notes • The Scree n Saver ca n prevent the PC moni tor from bur ning in di splaying the sam e image.
Operating Instr uct io ns [ F or a s s i s t a n c e, p l e a s e c a l l : 1- 8 0 0 - 2 7 2 - 7 03 3 ] 4 1 3.3.1 Using Op eration Bar Opera tion ba r cont rols the gene ral us e of Netw ork Came ra. Th e foll owing se ctio ns describ e the gene ral way of using it.
Operating Inst ructions 42 3.3.2 Viewing Buffered Ima ge Screen Buffered Ima ge scree n can be v iewed by clicking [Viewer] on the operat ion bar. Buffered Ima ge is sa ved in th e internal memory o f Network Camera by clicking [Start Capture] . Alarm/Time r mode in the Image Transfer o n page 62 can also buffer the i mage.
Operating Instr uct io ns [ F or a s s i s t a n c e, p l e a s e c a l l : 1- 8 0 0 - 2 7 2 - 7 03 3 ] 4 3 Notes • The refresh interval becomes lo nger as more clients access Network Camera. • The imag e resoluti on, image qu ality and object s ituation affect the number of frames in the Buffered Im age.
Operating Inst ructions 44 3.4 Multi-Camera Screen Four se parate Netw ork Camera im ages ca n be disp layed in both Motion J PEG and JPE G - Regularly Refresh. Yo u can jum p to eac h individu al Network Camera by clicki ng Cam era Na me. Refer t o page 76 for how to c onfigure ea ch Networ k Camera.
Operating Instr uct io ns [ F or a s s i s t a n c e, p l e a s e c a l l : 1- 8 0 0 - 2 7 2 - 7 03 3 ] 4 5 3.5 Setup Page Setup Page c ontrols all features of Network Came ra. Authenticat ion window protects the Network Ca mera securit y. It enab les only ad ministrat or to acce ss Setup Page by enteri ng ID and Pas sword.
Operating Inst ructions 46 Setup Page Note Firmware Version n umber indic ated on Setup Page is important f o r you r future support of Network Cam era.
Operating Instr uct io ns [ F or a s s i s t a n c e, p l e a s e c a l l : 1- 8 0 0 - 2 7 2 - 7 03 3 ] 4 7 Item Description (1) Go to To p Page Links t o Top Page. You can a ccess Singl e/Multi- Camera scree n in Motion JPEG /JPEG - Regularly Refres h.
Operating Inst ructions 48 (10) Externa l Output Control Sets the Ex ternal Device Control Ou tput settin g to attach ex ternal sen sors/devic es. (Open or Short to GND) Re fer to page 78 and pa ge 91. (11) Indic ator Control Sets Power Indicato r operation.
Operating Instr uct io ns [ F or a s s i s t a n c e, p l e a s e c a l l : 1- 8 0 0 - 2 7 2 - 7 03 3 ] 4 9 3.5.1 Go to Top Page Click [Go to Top Page] on Setup Page . You c an acc ess t he Si ngl e C amera and Multi-Cam era screen in M otion JPEG/J PEG - Regularly Refre sh.
Operating Inst ructions 50 3.5.2 N etwork Network window configure s network para meters. Restart Network Came ra to make the parame ters effec tiv e. • You can set disa ble Configu ration w indow from the Setup CD- ROM for th e securi ty by cl eari ng the check.
Operating Instr uct io ns [ F or a s s i s t a n c e, p l e a s e c a l l : 1- 8 0 0 - 2 7 2 - 7 03 3 ] 5 1 2. Enter each parameter in the proper d ata field . Click [Save] when f inished. • Click [Cancel] to quit th e current set tings. The wi ndow returns to Setup Page with out saving the parame ters.
Operating Inst ructions 52 Static • IP Address • Subnet Ma sk • Check [St atic], when having spe cified IP a ddress assigned to Network Camera from your ISP or admini strator. Ente r the specifi ed IP addres s and Sub net Mask. • If you u se Network Ca mera on th e LAN, set up in the same cl ass as yo ur PC is i n.
Operating Instr uct io ns [ F or a s s i s t a n c e, p l e a s e c a l l : 1- 8 0 0 - 2 7 2 - 7 03 3 ] 5 3 File size of the image The intern al memo ry, image resolution, image qua lity and object situ ation determin e the max imum numb er of frames .
Operating Inst ructions 54 3.5.3 N ame/Time Name/Time w indow is used to a ssign a name to ea ch Networ k Camera. D ate and Time entered on Name/Time w indow are u sed for the Alarm/Timer m ode in the Image Trans fer feature and on the Buf fered Image scree n.
Operating Instr uct io ns [ F or a s s i s t a n c e, p l e a s e c a l l : 1- 8 0 0 - 2 7 2 - 7 03 3 ] 5 5 Time Zone GMT- 10 :00 Haw aii GMT-09:00 Alaska, Hawaii Daylight Time GMT- 08:00 Pac ific Ti .
Operating Inst ructions 56 3.5.4 Secur ity: A dministrat or Security: Adminis trator window allow s the admi nistrator t o limit o r exclude access to the selec ted Network Camera.
Operating Instr uct io ns [ F or a s s i s t a n c e, p l e a s e c a l l : 1- 8 0 0 - 2 7 2 - 7 03 3 ] 5 7 Instructions f or the data fiel ds Authentication Enable Authe ntication window can be set in the three patte rns. None : No au thenticat ion window a ppears.
Operating Inst ructions 58 3.5.5 Secur ity: G eneral U ser Security: Gen eral User wind ow allows the admi nistrator to create the general user ID a nd passwo rd for the s ecurity lev el defined as gener al user. Up to 30 individu al user na mes can be def ined.
Operating Instr uct io ns [ F or a s s i s t a n c e, p l e a s e c a l l : 1- 8 0 0 - 2 7 2 - 7 03 3 ] 5 9 Instructions f or the data fiel ds Gener al User Authentication Th e General Us er can be up to 30. Ea ch of them c an have th eir own I D and pass word.
Operating Inst ructions 60 3.5.6 Top View Image Top View Ima ge Setting windo w can change set tings for T op Page, Sin gle Camera a nd Multi -Camera sc reen su ch as the in itial lan guage, the image resolution , image q uality, re fresh interva l as the i nitial setti ng, Limit tim e of Continuous Mot ion JPEG and On the Air time .
Operating Instr uct io ns [ F or a s s i s t a n c e, p l e a s e c a l l : 1- 8 0 0 - 2 7 2 - 7 03 3 ] 6 1 Instructions for the data fields Top Page • Top Page title can be chang ed. Enter th e new title. • Refer to una vaila ble c harac ter se t 1 on page 93 b ut [sp ace] is ava ilable.
Operating Inst ructions 62 3.5.7 Image Transfer Image T ransfer wind ow can set the I mage Transfe r featur e. Network C amera can buffer ima ges and send the imag es via e -mail or FT P.
Operating Instr uct io ns [ F or a s s i s t a n c e, p l e a s e c a l l : 1- 8 0 0 - 2 7 2 - 7 03 3 ] 6 3 Non Transfer mode Non Tra nsfer mode en ables [Start Capture] on the operation bar to buffe r the image on the Sing le Came ra s cre en. Refer to page 4 2.
Operating Inst ructions 64 Transfe r in the Alarm M ode The Alarm mode can trans fer an image via e-mail or FTP w hen the alarm trig ger is activ e. To activat e the alarm tri gger, the Ex ternal Sensor Input of Ex ternal I/O must be conn ected with the ex ternal sens ors/devic es.
Operating Instr uct io ns [ F or a s s i s t a n c e, p l e a s e c a l l : 1- 8 0 0 - 2 7 2 - 7 03 3 ] 6 5 Instructions fo r the data field s a. External Se nsor Input of External I/O activat es the ala rm trigger. Refer to page 91 . b. Active Time o f Trigger The activ e trigger ti me can b e set in the primary ti me and th e seconda ry time.
Operating Inst ructions 66 a. Select s Transfer Meth od . Non Transfer w ithout Memory Over Write : Image b uffering wil l stop when the intern al memo ry is full . Non Tr ansfer with Memory Ov er Write : Buffered i mage will overwrite th e older im age data wh en the int ernal memory is full.
Operating Instr uct io ns [ F or a s s i s t a n c e, p l e a s e c a l l : 1- 8 0 0 - 2 7 2 - 7 03 3 ] 6 7 Over wr ite setting : Selects [O ver Write ...] to over write the tran sferred im age or [Add time...] to save ea ch transfe rred image . Data transfer method : Use [Passi ve Mo de] no rma lly.
Operating Inst ructions 68 Setting Example b. a. c. d. e. f..
Operating Instr uct io ns [ F or a s s i s t a n c e, p l e a s e c a l l : 1- 8 0 0 - 2 7 2 - 7 03 3 ] 6 9 Setting expla nation a. The activ e time of trigger is set betwee n 9:00 AM t o 6:00 PM f rom Monday t o Frida y.
Operating Inst ructions 70 Transfe r in the Timer Mode The timer m ode can be activate d by entering the activ e time, the i mage set ting, frequency settin g and th e transf er metho d on Image T ransf er window . Buffere d Image can also be tra nsferred via e -mail or FTP.
Operating Instr uct io ns [ F or a s s i s t a n c e, p l e a s e c a l l : 1- 8 0 0 - 2 7 2 - 7 03 3 ] 7 1 Instructions fo r the data field s a. Buffers or tra nsfers by th e timer tri gger. b. Active Time o f Trigger Always : always activa tes the tim er trigger.
Operating Inst ructions 72 a. Select s Transfer Meth od . Non Transfer w ithout Memory Over Write : Image b uffering wil l stop when the intern al memo ry is full . Non Tr ansfer with Memory Ov er Write : Buffered i mage will overwrite th e older im age data wh en the int ernal memory is full.
Operating Instr uct io ns [ F or a s s i s t a n c e, p l e a s e c a l l : 1- 8 0 0 - 2 7 2 - 7 03 3 ] 7 3 Over wr ite setting : Selects [O ver Write ...] to over write the tran sferred im age or [Add time...] to save ea ch transfe rred image . Data transfer method : Use [Passi ve Mo de] no rma lly.
Operating Inst ructions 74 3.5. 8 Camera Setup Cam era S etu p wind ow sets White Bal ance and Powe r Line Frequency. Yo u can lock the Brightne ss feature . 1. Click [Cam era Se tup] on Setup Pa ge. 2. Select th e each parameter in the pr oper data field.
Operating Instr uct io ns [ F or a s s i s t a n c e, p l e a s e c a l l : 1- 8 0 0 - 2 7 2 - 7 03 3 ] 7 5 Instructions for the data fie lds White Balan ce Auto (default) — Auto White Balance Fixed.
Operating Inst ructions 76 3.5.9 Multi-Camera Multi-Camera w indow enabl es the se tting of Mult i-Camera scree n. Camera Name and IP addre ss of each Networ k Camera must be entere d to view the Mul ti- Camera scre en. R e gis teri ng I P addr ess es of th e oth er Netw o rk C amera ena ble s you to vi ew on the M ulti-Camera sc reen.
Operating Instr uct io ns [ F or a s s i s t a n c e, p l e a s e c a l l : 1- 8 0 0 - 2 7 2 - 7 03 3 ] 7 7 2. Select/Ent er the each pa rameter. Cli ck [Save] when fini shed. • Click [Cancel] to quit th e current set tings. The wi ndow returns to Setup Page with out saving the parame ters.
Operating Inst ructions 78 3.5.10 External Output Control External Output Control window e nables th e External Dev ice Control Output signal to activate the external sensors/ devices. (O pen or Shor t to GND) T he network a dministrato r should s et up this setting.
Operating Instr uct io ns [ F or a s s i s t a n c e, p l e a s e c a l l : 1- 8 0 0 - 2 7 2 - 7 03 3 ] 7 9 3.5.11 Indicator Control Indicator Con trol window allows you to select Power Indi cator operation. Power Indicato r operation has three patterns.
Operating Inst ructions 80 3.5.12 S tatus Status dis plays ge neral info rmation ab out Netwo rk Camera. Not e When som e trouble occ urs, the infor mation is useful.
Operating Instr uct io ns [ F or a s s i s t a n c e, p l e a s e c a l l : 1- 8 0 0 - 2 7 2 - 7 03 3 ] 8 1 3.5. 13 Rest art Restart wind ow restarts Network C amera with the par ameters sav ed. Restarting is requi red when the network pa rameters ar e changed.
Operating Inst ructions 82 3.5.14 Update Firmware Update Firmware w indow all ows the user to install the latest v ersion of t he Network Cam era internal o perating s ystem. In m ost cases , this will nev er be necessa ry. Change s may be nece ssary to acc ommoda te new operating systems or new web browsers th at are not sho wn on page 10.
Operating Instr uct io ns [ F or a s s i s t a n c e, p l e a s e c a l l : 1- 8 0 0 - 2 7 2 - 7 03 3 ] 8 3 4. Click [Update Firmware] on Setup Page. 5. Click [Update Firmware] . Wait abou t one min ute. Note If you cli ck [Update Fi rmware] , ope ration cannot be cancel ed.
Operating Inst ructions 84 6. Click [Browse...] to s elect the fi rmware from t he file s elector. • A dialog box appe ars to choos e the file. 7. Select a desired Firmware fil e (including the path i nformatio n) and click [Open] . 8. Make s ure the desi red firmware file name is selecte d correct ly, and c lick [Update Firm ware] .
Operating Instr uct io ns [ F or a s s i s t a n c e, p l e a s e c a l l : 1- 8 0 0 - 2 7 2 - 7 03 3 ] 8 5 3.5.1 5 Reset to Fa ct ory Default Reset to Fac tory Defa ult w in dow initi ali ze s all the p aramet ers inclu ding the ID , Passwor d, IP address and Subnet Mask exc ept Date and Time se tting to the factory d efault.
Operating Inst ructions 86 Section 4 Techni cal Guide s.
Operating Instr uct io ns [ F or a s s i s t a n c e, p l e a s e c a l l : 1- 8 0 0 - 2 7 2 - 7 03 3 ] 8 7 4.1 Mounting Four mounti ng met hods ar e show n in the f ollow ing fi gure s. Confir m the top an d bottom o f Network Came ra when mou nting.
Operating Inst ructions 88 Wall Mo unting Note Rear Mou nting Adap tor can be us ed in wall mounting. Refer to pag e 89 for Rear Mou nting Adaptor. 1) Mount the Flexi ble Stan d firm ly to t he wall or t he bea m using the three screws . 2) Attach Networ k Camera by scre wing the threa ded mount into th e tripod mounti ng hol e.
Operating Instr uct io ns [ F or a s s i s t a n c e, p l e a s e c a l l : 1- 8 0 0 - 2 7 2 - 7 03 3 ] 8 9 Ceiling Mounting 1) Mount the Flexibl e Stand firm ly to the ce iling or th e beam u sing the three s crews. 2) Attach the Rear Mo unting Ada ptor to the r ear of Net work Camera.
Operating Inst ructions 90 Notes • Make sure th e Power Indic ator is always i n the upper right corner when you mount. • The ups ide down m ounting m ay cause Net work Cam era to fall dow n. CAUTION Network Camera is intended for ind oor use only.
Operating Instr uct io ns [ F or a s s i s t a n c e, p l e a s e c a l l : 1- 8 0 0 - 2 7 2 - 7 03 3 ] 9 1 4.2 Interfacing to the External I/O The Alarm mode in the Image Transfer fe ature requi res the ex ternal senso rs/ device s t o be con nec ted to the Ex tern al Sens or Inp ut o f t he External I/O .
Operating Inst ructions 92 Circuit Diagram Example CAUTION • THE EXTERNAL I/O IS NOT CAPABLE OF CONNECTING DIRECTLY TO DEVICES THAT REQUIRE LARGE AMOUNTS OF C URRENT. IN SOME CASES, A CUSTOM INTERFACE CIRCUIT (CUSTOM ER PROVIDED) MAY HAVE TO BE USED.
Operating Instr uct io ns [ F or a s s i s t a n c e, p l e a s e c a l l : 1- 8 0 0 - 2 7 2 - 7 03 3 ] 9 3 4.3 ASCII and ISO-8859-1 Character Table The chara cters of t he ASCII chara cter table are available f or use in the variou s setu p wi ndows.
Operating Inst ructions 94 Displa yable charac ter set Network Camera ca n display IS O-8859-1 c haracter set for West Euro pean langua ges and th e Shift-JIS c haracter set for Japane se.
Operating Instr uct io ns [ F or a s s i s t a n c e, p l e a s e c a l l : 1- 8 0 0 - 2 7 2 - 7 03 3 ] 9 5 4.4 Maintenanc e To keep Network Cam era funct ioning in good con dition, m aintenance p lays an importan t part. Keep maintena nce when u sing Network Camera.
Operating Inst ructions 96 Section 5 Specification and Trou bleshooting.
Operating Instr uct io ns [ F or a s s i s t a n c e, p l e a s e c a l l : 1- 8 0 0 - 2 7 2 - 7 03 3 ] 9 7 5.1 Network Camera Reset Procedure — Default Settings If the u ser forg ets se ttin gs or pa ss w ords , Net work Came ra c an b e easily res et to the defau lt setting s.
Operating Inst ructions 98 5.2 Default Settings List No Items Factory Default value Indispensable setting Note 1 Network 1. Network Configuration Checked - - 2. Port No. 80 - 1 – 65535 Static : IP Address 192.168.0.253 If necessary If necessary If necessary (*1) (*1) (*1) (*1) Static : Subnet Mask 255.
Operating Instr uct io ns [ F or a s s i s t a n c e, p l e a s e c a l l : 1- 8 0 0 - 2 7 2 - 7 03 3 ] 9 9 No Items Factory Default value Indispensable setting Note 5 Top View Image 320 x 240 - 160 x.
Operating Inst ructions 100 No Items Factory Default value Indispensable setting Note 6 1. Alarm 5. Non Transfer without Memory Over Write Non Transfer with Memory Over Write Selected - - Not-selected.
Operating Instr uct io ns [ F o r a s s i s t a n c e , p l e a s e c a l l : 1 - 8 0 0 - 27 2 - 7 0 3 3 ] 1 0 1 No Items Factory Default value Indispensable setting Note 1.
Operating Inst ructions 102 No Items Factory Default value Indispensable setting Note 7 1. White Balance Auto Auto, Fixed (Indoor/Fluorescent_1/ Fluorescent_2/Outdoor), Hold Camera Setup 2.
Operating Instr uct io ns [ F o r a s s i s t a n c e , p l e a s e c a l l : 1 - 8 0 0 - 27 2 - 7 0 3 3 ] 1 0 3 5.3 Specificati ons Network C amera Specificati ons Other Specifica tion Item Descrip t.
Operating Inst ructions 104 Imag e Tra ns ferr i ng Met hod S MTP, FT P Interface 10Base-T Ethernet RJ-4 5 connector x 1 External I/O * 3 Exter nal Sensor Inp ut x 1 External Device Control Output x 1 Power Indicator Display Power/Ne twork Camera operati on Ethernet Ind icator Disp lay Netw ork Communic ation Dimensio n (HWD) 1 16 m (4.
Operating Instr uct io ns [ F o r a s s i s t a n c e , p l e a s e c a l l : 1 - 8 0 0 - 27 2 - 7 0 3 3 ] 1 0 5 5.4 Troubleshootin g About Network Ca mera Setup Problem Cause and Remedy When Setu p CD-ROM cannot f ind Network Camera. • Reco nnect the AC adaptor if installat ion is no t comple ted withi n 20 minu tes.
Operating Inst ructions 106 When Top Pa ge does not appear. • Enter the c orrect IP ad dress in the web brow ser. • IP address and Subnet M ask of the PC a nd the Netw ork Camera m ust be in the same c lass of the private IP address on the LAN. Refe r to page 25.
Operating Instr uct io ns [ F o r a s s i s t a n c e , p l e a s e c a l l : 1 - 8 0 0 - 27 2 - 7 0 3 3 ] 1 0 7 Power Indic ator continu es blin king. • Internal Failure of t he s erv er o r the co nge st ion on the netw o rk traffic when using DHCP may prevent Network Camera fr om getting the IP addre ss.
Operating Inst ructions 108 Update Firmware ha s not fin ished. When Up date Fi rmware is interru pted by power of f, or for ne twork troubles and other problems, fol low the pro cedure bel ow.
Operating Instr uct io ns [ F o r a s s i s t a n c e , p l e a s e c a l l : 1 - 8 0 0 - 27 2 - 7 0 3 3 ] 1 0 9 About Top View Image sc reen Problem Cause and Remedy The Top Vi ew Image s creen (Single C amera/ Multi-Cam era) does not appe ar.
Operating Inst ructions 110 Ref resh inte rval is longer than the setup. • The traffic of the ne twork, PC perform ance and th e object of the im age affect the refresh interval . The network congest ion ca uses refresh interval slower than the set up .
Operating Instr uct io ns [ F o r a s s i s t a n c e , p l e a s e c a l l : 1 - 8 0 0 - 27 2 - 7 0 3 3 ] 1 1 1 5.5 Con firmation of Network Camera Operation This proc edure ch ecks the Netwo rk Camera operat ion. IP ad dress o f the PC has to be on the same network to be able to access Network Camera.
Operating Inst ructions 112 4. Record the c urrent TCP/IP prop erties of the PC. Th ey are impor tant in the later pro cedure to se t the TCP/I P properties of the PC ba ck. 5. Enter "19 2.168.0.25 0" in the IP address fie ld and "2 55.
Operating Instr uct io ns [ F o r a s s i s t a n c e , p l e a s e c a l l : 1 - 8 0 0 - 27 2 - 7 0 3 3 ] 1 1 3 5.6 FCC and Other Informatio n This equ ipme nt has been t est ed and found to com ply wi th the l imits fo r a Cl ass B digital de vice, purs uant to Part 15 of t he FCC Rules.
Operating Inst ructions 114.
Operating Instr uct io ns 115 Index.
Operating Inst ructions 116 A AC adap tor 12, 20, 104 ActiveX Contro ls 39 Administra tor 56 Alarm Mo de 64 Alarm trig ger 64, 65 ASCII ch aracter table 93 Authentic ation 11 , 36, 57, 59 Auto Adju st.
Operating Instr uct io ns 117 Mult i Client Access 8 Multi- Cam era 44, 76 Multi- Language 37, 60 N Netsca pe Navi gat or 10 Network Pro tocol 10 Network window 50 Non Tran sfer mode 63 NTP (Network T.
Panasonic Consumer Electr onics Company , Division of Matsushita Electric Corporation of America Printed in Japan PSQX2679Y A KK1101RM1013 2001 P anasonic Communications Co ., Ltd. All Rights Reser v ed. Panasonic Sales Compan y , Division of Matsushita Electric of Puerto Rico, Inc.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Panasonic KX-HCM8 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Panasonic KX-HCM8 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Panasonic KX-HCM8, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Panasonic KX-HCM8 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Panasonic KX-HCM8, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Panasonic KX-HCM8.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Panasonic KX-HCM8. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Panasonic KX-HCM8 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
