Manuel d'utilisation / d'entretien du produit 3TR006490BAA du fabricant Panasonic
Aller à la page of 136
Bef ore operating this product, please read the instructions carefully and sav e this manual f or future use . Operating Instructions <Basics> HD Integrated Camera Model No .
2 This class A digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la c lasse A est conforme à la norme NMB-003 du Canada. F or CANAD A W ARNING: THIS APP ARA TUS MUST B.
3 indicates saf ety inf or mation. 1) Read these instructions. 2) K eep these instructions. 3) Heed all warnings. 4) Follo w all instructions. 5) Do not use this apparatus near water . 6) Clean only with dr y cloth. 7) Do not b lock any v entilation openings .
4 Contents Safety precautions ........................................................... 2 Before use ......................................................................... 5 Overview ...............................................................
5 Bef ore use Overview This unit is a compact full HD camera integr ated with a pan‑tilt head and f eaturing a newly de veloped 1/3‑inch full HD MOS sensor and digital signal processor (DSP).
6 Bef ore use Required personal computer en vironment CPU Intel ® Core TM 2 DUO 2.4 GHz or f aster recommended Memory 512 MB or more (When using Microsoft ® Windows Vista ® : 1 GB or more, .
7 Bef ore use Disc laimer of warranty IN NO EVENT SHALL P anasonic System Networks Co ., Ltd. BE LIABLE T O ANY P AR TY OR ANY PERSON, EXCEPT FOR REPLA CEMENT OR REASONABLE MAINTENANCE OF THE .
8 Characteristics Multiple number of f ormats supported Switching between the 1080/59.94i, 720/59.94p and 480/59.94i f or mats can be accomplished using a menu. By using VIDEO OUT signals , HD f or mat signals and SD f or mat signals can be output at the same time.
9 Contr oller suppor ted A W-RP655 A W-RP555 A W-RP50 It may be necessary to upgrade the version of the controller in or der to support the unit. Consult with your dealer . When connecting the A W -RP655 The camera menus that are oper ated using the LCD panel on the A W ‑RP655 cannot be used.
10 Installation precautions In addition to heeding the points presented in the “Saf ety precautions”, observe the follo wing precautions as well. Ensure that the installation work complies with the technical standar ds governing electrical equipment.
11 Installation precautions Be absolutely sure to use the brac ket and screws supplied when installing the unit. Do not mount the unit by emplo ying an y methods other than those specified. Do not remodel the mounting brac ket or mounting scre ws provided with the unit.
12 Operating precautions Shoot under the proper lighting conditions. T o produce pictures with ey e‑pleasing colors, shoot under the proper lighting conditions. The pictures ma y not appear with their proper colors when shooting under fluorescent lights.
13 Operating precautions T urn off the power bef ore connecting or disconnecting the cables. Alwa ys be sure to turn off the power bef ore connecting or disconnecting the cables . Handle the unit carefully . Do not drop the unit or subject it to strong impact or vibration.
14 Concerning the wireless remote contr ol (optional accessory) This unit can be operated by remote contr ol using a wireless remote control (model n umber: A W-RM50G) purc hased separately . Check out the f ollowing points bef ore using the wireless remote control.
15 P ar ts and their functions Camera unit <Rear panel (A W -HE50H)> <Rear panel (A W -HE50S)> <Bottom panel> 1 Mount brac ket for installation surface (supplied accessory) Mount this brac ket onto the installation surf ace , and then attach the camera main unit to the brac ket.
16 P ar ts and their functions 9 LAN connector for IP contr ol [LAN A CT/LINK] This LAN connector (RJ45) is connected when e xercising IP control ov er the unit from an e xternal device.
17 P ar ts and their functions Wireless remote contr ol (optional accessory) 1 ON/ST ANDBY b utton Each time this is pressed f or 2 seconds, operation s witches between turning on the unit’ s power and establishing the standb y status.
18 P ar ts and their functions 9 PRESET/LIMIT button This is used to register the settings in the preset memories or set or release the limiters. When a preset memor y call b utton is pressed while the PRESET/LIMIT button is held do wn, the inf ormation on the unit’ s current direction and other settings is registered in the call button.
19 Setting the remote contr ol IDs The wireless remote control (optional accessor y) is capab le of operating up to f our units. IDs are used to set which units are selected when the [CAM1], [CAM2], [CAM3] and [CAM4] buttons on the wireless remote control hav e been pressed.
20 Ho w to install and connect the unit Be absolutely sure to read thr ough the “Installation precautions” on pages 10 to 11. The procedure given here is f or the kind of installation where the unit is suspended from an overhead surf ace , but the same steps are f ollowed f or a stand‑alone installation.
21 Ho w to install and connect the unit 2 Mount the mount bracket onto the installation surface. Use the brac ket mounting scre ws (M4, bind‑head: 10 mm long) supplied with the unit. F or proper clamping torque, securely attach the scre ws using the specified tools.
22 Ho w to install and connect the unit 4 Mount the unit. Align the position of the hole f or checking the positioning with the status displa y lamp .
23 Ho w to install and connect the unit 6 Connect the rear panel connectors. Anchor the A C adapter cable in place using the cab le clamp . Cable clamp Cable clamp LAN cable LAN cable Interface cab.
24 Ho w to install and connect the unit When using the WV -Q105 (optional accessory) It is recommended that you pro vide an inspection opening or other such space f or access pur poses in the area near where the equipment is installed in order to f acilitate installation and the wiring connections work.
25 Changing the direction of the nameplate When the unit is mounted on the ceiling, its nameplate will be upside down. The direction of the unit’ s nameplate can be changed. 1 Push in the part indicated by the arro w , and pull out the nameplate .
26 Remo ving the camera 1 T urn off the cir cuit breaker and power . 2 Remove the cab le cover . Remov e the screw (M3) f or the cable cov er used to secure the cov er . Push the tab par ts of the cov er to disengage the cov er .
27 Stand-alone installation (when the mount brac ket is going to be used) The same steps are f ollowed as f or the kind of installation where the unit is suspended from an overhead surf ace (pages 20 to 23).
28 Stand-alone installation (when the mount brac ket is going to be used) 5 Check the mounting. 6 Connect the rear panel connectors. Cable clamp Cable clamp LAN cable LAN cable Interface cable I.
29 Stand-alone installation (when the mount brac ket is not going to be used) When installing the unit on a desktop Place the unit flat on the surface.
30 Connections Connections with an HD monitor HD monitor HDMI signal (A W-HE50H only), SDI signal (A W -HE50S only) or HD analog component signal HD Integrated Camera A W-HE50 Wireless remote control (optional accessory) Up to four units can be oper ated using one remote control.
31 Connections Connections with a contr oller (A W -RP655 or A W -RP555) Y PB PR V IN OUT LAN cable (straight cable) Pan-tilt head/ camera control signals HD Integrated Camera A W-HE50 Multi H.
32 Connections System example 1 Accessory A C adapter HD Integrated Camera A W-HE50S HD Integrated Camera* A W-HE50S SDI video signal Switcher Monitor 1 Monitor 2 Monitor Monitor Pan-tilt head.
33 Connections System example 2 Accessory A C adapter HD Integrated Camera A W-HE50S HD Integrated Camera* A W-HE50S Genlock signal generator SDI video signal Switching hub LAN cable (straight.
34 Netw ork settings Installing the software Be absolutely sure to read through the “Readme.txt” on the CD‑ROM supplied with the unit first bef ore attempting to install the software . Software pro vided on the CD-R OM Easy IP Setup Software (EasyIPSetup.
35 Netw ork settings 1 Start the Easy IP Setup Software . 2 Click the MA C address/IP address of the camera to be set, and c lick the [IP setting] button. When a DHCP ser v er is being used, the IP address allocated to the unit can be check ed by clicking the [Refresh] b utton of the Easy IP Setup Software .
36 T r oub leshooting Operation Symptom Cause and remedial action Reference pages No power Is the A C adapter securely connected to the A C outlet? ––– If the power plug .
37 Symptom Cause and remedial action Reference pages The adjustment of the slowest speed at which the camera is to start panning and tilting fails to be completed for the A W -RP655 or A W -RP555 Do n.
38 Symptom Cause and remedial action Reference pages The web setting screen cannot be accessed Has the same IP address setting been used f or another device? Is there a lack of consistenc y be.
39 T r oub leshooting Video Symptom Cause and remedial action Reference pages No pictures are display ed or the pictures are disturbed Has the unit been connected properl y to the other connected devices? P .
40 Symptom Cause and remedial action Reference pages Ring-shaped reflections appear in the four corner s of the images These are caused by the reflections of the light between the lens and the cover in fr ont of the lens.
41 T r oub leshooting W eb settings Depending on the OS installed on the PC , the follo wing ma y occur . F ollow the instructions below when the f ollowing has occurred. By performing the follo wing solutions, other applications and the security le vel ma y not be affected.
42 Appearance Unit: mm (inch) R80 (R3-5/32) 160 (6-5/16) 85 (3-11/32) 80 (3-5/32) 72 (2-13/16) 166 (6-9/16) 3 (1/8) 55 (2-3/16) 123 (4-13/16) 175 (6-7/8) A W-HE50H A W-HE50S.
43 Specifications P ower requirements: DC 12 V 10 % (A C adapter provided) P ower consumption: DC 12 V , 1.2 A (A W‑HE50H) DC 12 V , 1.3 A (AW ‑HE50S) GENERAL Ambient operating tempera.
44 Specifications FUNCTIONS AND PERFORMANCE [Camera unit] Imaging sensors: 1/3 ˝ Full‑HD MOS Lens: Motorized 18 zoom, f/1.6 to 2.8 (f=4.7 to 84.6 mm; 35 mm equivalent: 36.9 mm to 664.5 mm) Focus: Switching between auto and manual Focus distance: Entire zooming range: 1.
Memo.
Printed in Japan F0410S1050 D Panasonic Solutions Compan y 3 P anasonic W a y , Secaucus, NJ 07094 T el: 877‑803‑8492 www .panasonic.com/broadcast e‑mail: MediaProServices.PSC@us.panasonic.com Panasonic Canada Inc. 5770 Ambler Drive , Mississauga, Ontario L4W 2T3 T el: 905‑624‑5010 Panasonic de México S.
Operating Instructions <Operations and Settings> HD Integrated Camera Model No . A W ‑H E 50 H N A W ‑HE50SN 3TR006484AAA.
2 Contents Before use ......................................................................... 3 Overview ........................................................................ 3 Concerning the Operating Instr uctions .......................... 3 Required personal computer environment .
3 Bef ore use Overview This unit is a compact full HD camera integr ated with a pan‑tilt head and f eaturing a newly de veloped 1/3‑inch full HD MOS sensor and digital signal processor (DSP).
4 Bef ore use Required personal computer en vironment CPU Intel ® Core TM 2 DUO 2.4 GHz or f aster recommended Memory 512 MB or more (1 GB or more when using Microsoft ® Windows Vista ® ) N.
5 Bef ore use Disc laimer P anasonic Corporation will accept absolutely no responsibility whatsoe ver when an y of the f ollowing is applicable: 1 Any accidental, special or consequential damages or harm caused either directly or indirectly in connection with the unit 2 Any prob lems with or damage to the unit, etc.
6 Basic shooting operations 1 Set the subject brightness to the appropriate level. 2 T urn on the po wer of all the units and devices in the system. 3 Select the unit to be operated. Even when using only one unit, it m ust still be selected from the wireless remote control or controller .
7 Ho w to turn the po wer on and off T urning the power on When performing the operations using the wireless remote control 1 Set all the power s witches of the units and devices connected in the system to ON. This unit does not hav e a pow er s witch.
8 Ho w to turn the po wer on and off T urning the power off When performing the operations using the wireless remote control 1 Press one of the [CAM1] to [CAM4] buttons on the wireless remote control to select the unit. 2 Press the [ON/ST ANDBY] b utton on the wireless remote control f or 2 seconds.
9 Selecting the units Up to f our units can be operated using one wireless remote control. Up to five units and de vices can be operated using one controller . Select the unit (or units) to be operated from the wireless remote control or controller . Even when using only one unit, it m ust still be selected.
10 Selecting the shooting modes (scene files) How to select the shooting mode When performing the operations using the wireless remote control 1 Press the [CAM1], [CAM2], [CAM3] or [CAM4] button to select the unit. 2 Press the [MENU] button f or 2 seconds.
11 Selecting the shooting modes (scene files) When performing the operations using the contr oller When the A W‑RP655 is connected: 1 Press the [1], [2], [3], [4] or [5] b utton of [CONTROL/PREVIEW MONIT OR OUT SEL]. 2 Press the [MENU] button.
12 Shooting When performing the operations using the wireless remote control Changing the camera’ s direction Moving the camera to ward the left or right (panning): Press the [ ] or [ ] button. Moving the camera up or do wn (tilting): Press the [ ] or [ ] button.
13 What to do when encountering pr ob lems in the basic shooting operations If the trouble is not resolv ed b y taking the action suggested below , refer to “T roub leshooting” (page 36 in the <Basics>). When performing the operations using the wireless remote control The unit does not move.
14 More ad v anced operations Manual shooting (see pages 15 to 18) Manual adjustment of f ocus Manual adjustment of iris Manual adjustment of shutter speed Manual adjus.
15 Manual shooting Manuall y adjusting the f ocus The lens f ocus can be adjusted manually . When performing the operations using the wireless remote control 1 Press the [M/FOCUS] button to s witch the focus to man ual adjustment. 2 Press the [F] or [N] button of [FOCUS], and adjust the focus.
16 Manual shooting Manuall y adjusting the iris The lens iris can be adjusted manually . When performing the operations using the wireless remote control 1 Press the [M/IRIS] button to s witch the iris to manual adjustment. 2 Adjust the iris using the [IRIS +] or [IRIS –] button.
17 Manual shooting Manuall y adjusting the shutter speed The shutter speed can be set using two methods. One is a method that specifies the time (where a time such as 1/250 sec. is designated), and the other is a method that specifies the frequency (where synchro scan, 60.
18 Manual shooting Manuall y adjusting the gain There are two wa ys to adjust the gain. One wa y in volv es using the buttons on the wireless remote control or controller ; the other way in v olv es using the Camera menu or W eb setting. The gain can be adjusted more precisely using the Camera menu or W eb setting.
19 Preset memories This unit enables up to 100 settings f or the camera direction (panning and tilting), zoom, f ocus, iris, gain and white balance to be registered in its preset memories, and called.
20 Preset memories When performing the operations using the contr oller When the A W‑RP655 is connected: Up to 50 settings can be registered and called. The [1] to [50] buttons of [TRA CING/PRESET MEMOR Y] correspond to the unit’ s preset memories No .
21 Preset memories When the A W‑RP555 is connected: Up to 10 settings can be registered and called. The [1] to [10] buttons of [PRESET] correspond to the unit’ s preset memories No.1 to No .10. Registering the settings in the preset memories 1 Display the picture to be shot on the monitor .
22 White balance adjustment White balance adjustment In order f or the white to be reproduced accurately , the ratio between the three primar y colors (RGB) is adjusted. If the white balance has shifted out of adjustment, not only will the white be reproduced poorly but the color tones of the entire screen will also be degraded.
23 White balance adjustment 5 Press the [ ] or [ ] button to bring the cur sor to “A WB Mode”. 6 Press the [ ] button. “A WB Mode” star ts blinking. 7 Press the [ ] or [ ] b utton to change the A WB mode to be used to “A WB A” or “A WB B”, and press the [ ] button to enter the selection.
24 White balance adjustment When the A W‑RP50 is connected: Ref er to the Operating Instructions of the controller . White balance ma y not be correctly set if the lighting of the object is too weak. Since the unit has a built‑in memory , the set white balance will remain in the memor y e v en if power is turned off.
25 Blac k le vel (master pedestal) adjustment Blac k level (master pedestal) adjustment The blac k le v el can be adjusted when using a multiple number of cameras including the unit. Ask your dealer to perf or m this adjustment. (Use an oscilloscope or wa vef or m monitor for the adjustment.
26 Blac k le vel (master pedestal) adjustment When performing the operations using the contr oller When the A W‑RP655 is connected: 1 Press the [IRIS] button se veral times to turn off its lamp. Set the iris to the manual ([MANU]) mode. 2 T urn the [FOCUS/IRIS] dial to stop do wn the lens iris.
27 Genloc k adjustment (A W ‑HE50S only) Genloc k adjustment The genlock adjustment is perf ormed to achiev e phase alignment by applying e xternal synchronization (genlock) when a multiple number of camer as will be used or when the unit will be used in combination with other de vices.
28 Genloc k adjustment (A W ‑HE50S only) Color phase adjustment The color phase adjustment must be perf ormed if the pictures are to be s witched using a video switcher or other de vice when the video output signals hav e been set as composite signals.
29 Genloc k adjustment (A W ‑HE50S only) When performing the operations using the contr oller These operations can be perf ormed using the camera menus b y follo wing the operation steps in “Basic operations” (pages 30 to 37).
30 Basic operations Menus are displa yed on the monitor when the unit’ s settings are to be selected. The monitor is connected to the video signal output connector . The basic menu operations in v olve displa ying sub‑menus from the T op Menu items , and selecting settings on the sub‑menus.
31 Basic operations Menu operation Wireless remote control Controller A W‑RP655 A W‑RP555 A W‑RP50 Returning to the previous menu With the cursor at the [Return] position, press the [ ] button. With the cursor at the [Return] position, press the jog dial (main).
32 Basic operations When perf orming the operations using the wireless remote contr ol 1 Press the [CAM1], [CAM2], [CAM3] or [CAM4] button to select the unit whic h is to be operated. 2 Press the [MENU] button f or 2 seconds. The T op Menu is displa y ed.
33 Basic operations Contr ol ex er cised fr om the Multi‑Function Contr oller A W ‑RP655 For executing A WB. *1, *2 Jog dial (main) When the LCD is in the gain adjustment mode ([GAIN] button: MANU) Select the desired gain setting from GAIN 0 dB to 18 dB.
34 Basic operations Procedure f or camera menu operation (A W ‑RP655) 1 Press one of the [1] to [5] buttons of [CONTROL/PREVIEW MONIT OR OUT SEL] to select the unit which is to be operated. 2 Press the [MENU] button to set the LCD panel display to the men u mode.
35 Basic operations Contr ol ex er cised fr om the Multi Hybrid Contr ol P anel A W ‑RP555 For switching the SCENE file (FullAuto, Manual1 to 3). For operating the camera menus. MENU: This operates in the same wa y as MENU on the camera. ITEM: This operates in the same wa y as ENTER on the camera.
36 Basic operations Procedure f or camera menu operation (A W ‑RP555) 1 Press one of the [1] to [5] buttons of [CONTROL] to select the unit whic h is to be operated. 2 Press the [MENU] button of the A W ‑RP555 for 2 seconds. The camera menu of the A W ‑HE50 is displa yed on the monitor .
37 Basic operations Contr ol ex er cised fr om the Remote Camera Contr oller A W ‑RP50 POWER ALARM F1 CAMERA OSD R/B GAIN R/B PED SYSTEM SETUP CAMERA SCENE/MODE DETAIL DELETE STORE PAGE MENU.
38 Setting the menu items Setting the menu items When the unit’ s settings are to be selected, the menus are displa yed on the monitor . The monitor is connected to the video signal output connector . The basic menu operations in v olve displa ying sub‑menus from the T op Menu items , and selecting settings on the sub‑menus.
39 Setting the menu items Camera screen (when FullA uto is selected) This menu is used f or the camera image settings . Camera Scene FullAuto Contrast Level 0 Return Scene [FullA uto, Manual1, Manual2, Manual3] Selected here is the shooting mode that matches the shooting situation.
40 Setting the menu items Contrast screen Contrast Contrast Mode Auto Contrast Level 0 Shutter Mode ---- Step/Synchro ---- Frame Mix ---- AutoF.Mix Max Gain 18dB Gain Auto AGC Max Gain 18dB Return Contrast Mode [A uto, Manual] This item is used to select whether the image brightness (contrast) is to be controlled automatically or manually .
41 Setting the menu items Picture 1/2 screen Picture 1/2 Chroma Level 0 AWB Mode AWB A Detail High Flesh Tone Mode Off Color Matrix EBU DNR High Return Chroma Le vel [–3 to +3] Set here is the color intensity (chroma le vel) of the images. A WB Mode [A TW , A WB A, A WB B] The white balance mode is selected here.
42 Setting the menu items Picture 2/2 screen Picture 2/2 Pedestal 0 DRS Off Gamma Type Normal Gamma Level Mid Back Light COMP. Off Return P edestal [–10 to +10] This item is used to adjust the blac k le v el (adjust the pedestal) so that the dark par ts of the images are easier to see.
43 Setting the menu items Genloc k screen (A W ‑HE50S onl y) Genlock Horizontal Phase 0 Subcarrier Phase Coarse 90° Fine 0 H Phase.SC Fine Step 1 Return Horizontal Phase [–206 to +49] This is used to adjust the horizontal phase during genlock.
44 Setting the menu items HDMI Color (A W ‑HE50H only) [RGB‑NOR, RGB‑ENH, YCbCr422, YCbCr444] Set here is the HDMI color output. When an HDMI monitor is used, use “YCbCr422” under normal circumstances.
45 Setting the menu items Changing the format When the f or mat is changed on the Output screen from its current setting, the F or mat change chec k screen appears. Format change chec k screen Format Do you want to set Format(1080i)? CANCEL O.
46 Setting the menu items Other 1/2 screen Other 1/2 Install Position Desktop Preset Speed 10 Preset Scope Mode A Digital Zoom Disable Speed With Zoom POS. On Focus Mode Auto Focus ADJ With PTZ. On Return Install P osition [Desktop, Hanging] “Desktop” or “Hanging” is selected here as the method used to install the unit.
47 Setting the menu items Other 2/2 screen Other 2/2 Tally Enable Enable OSD Off With Tally Off OSD Status Off Wireless Control Enable Return T ally Enab le [Disable, Enable] “Enable” or “Disab le” is set here f or the function which turns on or tur ns off the tally lamp using the tally control signal.
48 Setting the menu items Maintenance screen Maintenance Firmware Version Initialize Return Firmware V ersion This is selected to displa y the Fir mware V ersion screen on which to check the v ersion of the firmware used. Initialize This is selected to displa y the Initialize screen on which to initialize the camera’ s settings.
49 Setting the menu items Concerning initialization When “Initialize” is selected on the Maintenance screen, the Initialize screen appears . Initialize screen Initialize Do you want to initialize Menu settings? CANCEL O.K. Return When the cursor is mov ed to “O .
50 Menu item tab le Menu Item Factory setting Selection items FullA uto Manual1 to 3 T op Menu Camera Scene Scene FullAuto FullAuto , Manual1, Manual2, Manual3 Contrast Contrast Mode ‑‑‑‑ Auto.
51 W eb setting screen Connect the unit and a personal computer , and estab lishing the settings on the W eb browser screen. The LAN crossov er cable is used when connecting a personal computer directly to the unit’ s LAN connector f or IP control, and the LAN straight cab le is used when making the connection through a s witching hub .
52 W eb setting screen Menu operations Star t the W eb browser , and enter “ http://192.168.0.10/ ” in the [Address] box of the Web browser . When the IP address has been changed, the URL will also change. If this is the case, set the changed IP address to the URL (http://changed IP address/).
53 W eb setting screen Control b utton / Setup button Press the Control button to s witch to the Control screen on which to control such operations as the panning, tilting, zooming and f ocusing of the camera. (See page 54) Press the Setup button to s witch to the Image Adjust screen on which to establish the camer a’ s settings .
54 W eb setting screen Contr ol screen This is the screen on which such operations as the panning, tilting, zooming and f ocusing of the unit can be controlled. Zoom Use this to adjust the zoom (magnification) in the Wide direction. Use this to adjust the zoom (magnification) to 1.
55 W eb setting screen Control pad and its b uttons T o adjust the image in the horizontal or vertical direction (panning or tilting), left‑click the pad and the buttons . The more the outside of the pad is click ed, the f aster the camera operates.
56 W eb setting screen Setup screen Pressing the Setup button s witches the displa y to this screen on which the unit’ s settings are established. Basic screen Basic button When the Basic button is pressed, the Basic screen is displa yed in the area on the right.
57 W eb setting screen Image screen Image Image Image adjust This is used to displa y the Image Adjust screen. Preset position This is used to displa y the Preset P osition setting screen.
58 W eb setting screen Image adjust screen When Scene is set to “FullA uto” When Scene is set to “Manual1 to 3”.
59 W eb setting screen Scene [FullA uto, Manual1, Manual2, Manual3] Selected here is the shooting mode that matches the shooting situation. Select the mode which best suits the pre vailing shooting conditions and the user’ s pref erences .
60 W eb setting screen Picture Chroma Le vel [–3 to +3] Set here is the color intensity (chroma le vel) of the images. A WB This is used to e xecute automatic white balance (A WB) to set the white balance. F or details, ref er to page 22. A WB Mode [A TW , A WB A, A WB B] The white balance mode is selected here.
61 W eb setting screen Preset position setting screen Preset This selects the preset position to be operated from the pull‑down men u. This is used to register the current status in the preset position now selected on the pull‑down menu. It does not function if “Home” has been selected on the pull‑down menu.
62 W eb setting screen Brightness Use this to adjust the image brightness manually . Use this to make the image darker . It does not work during automatic adjustments. Use this to make the image lighter . It does not work during automatic adjustments.
63 W eb setting screen System This menu has items that relate to the genloc k phase adjustment and camera’ s output image settings. Genlock (A W ‑HE50S onl y) This item’ s setting is reflected immediately . Horizontal Phase [–206 to +49] This is used to adjust the horizontal phase during genlock.
64 W eb setting screen Output This item’ s setting is reflected when the Set b utton is pressed. Format [1080i, 720p, 480i] The video f or mat is changed on this screen. Down CONV . Mode [Squeeze, SideCut, LetterBox] The down‑con version mode is selected here .
65 W eb setting screen Other This item’ s setting is reflected when the Set b utton is pressed. Install P osition [Desktop, Hanging] “Desktop” or “Hanging” is selected here as the method used to install the unit.
66 W eb setting screen User mng. The authorization of those users who can access the camera from a PC or A W ‑RP50 and those IP addresses, from which the camera can be accessed, is registered on this screen in order to restrict any other access.
67 W eb setting screen Host auth. screen Host auth. <Initial setting: Off> Host authorization is set to “On” or “Off ” here . IP address <Initial setting: b lank> The IP address of the PC from which access to the camera is allow ed is input here.
68 W eb setting screen Server This screen has items that relate to the NTP ser v er addresses, port numbers and other NTP ser ver settings . NTP screen Time adjustment <Initial setting: Off> Select one of the f ollowing settings as the time adjustment method.
69 W eb setting screen Network This screen has items that relate to the network settings, DDNS (Dynamic DNS) and SNMP (Simple Network Management Protocol).
70 W eb setting screen Subnet mask <Initial setting: 255.255.255.0> Input the unit’ s subnet mask here if the DHCP function is not going to be used. Default gatewa y <Initial setting: 192.168.0.1> Input the unit’ s def ault gate wa y if the DHCP function is not going to be used.
71 W eb setting screen DDNS screen Use DHCP to acquire the global IP address. The DDNS function must be set in order to access the unit ov er the Internet. When using the DDNS function, access the unit using the “address of host name.nmdns.net” which was registered in the DDNS ser v er .
72 W eb setting screen SNMP screen The settings related to the SNMP function are selected on this screen. When the SNMP manager is used f or the connection, the unit’ s statuses can be chec ked. When the SNMP function is to be used, consult with your netw ork administrator .
73 W eb setting screen Maintenance Among the various maintenance operations perf or med on this screen are system log checks, system v ersion upgr ading and initialization of the unit. The screen itself consists of five tabs: “System log”, “Upgrade”, “Default reset”, “Back up” and “Other”.
74 W eb setting screen Upgrade screen On this screen, it is possible to chec k the unit’ s software versions and upg rade them to the latest v ersions. F or details on the software used f or v ersion upgrading, consult y our dealer . The “Model no .
75 W eb setting screen Use the personal computer on the same subnet as the camera to upgr ade the software v ersion. Bef ore using the version upg rading software , be absolutely sure to check the precautions to be obser v ed with your dealer , and follo w the dealer’ s instructions.
76 W eb setting screen Default reset screen The unit’ s setting data and HTML files are initializ ed and the unit is restar ted on this screen. Reset to the default (Except the network settings) When the Ex ecute button is clic ked, the unit’ s settings are returned to their defaults.
77 W eb setting screen Back up screen On this screen, the unit’ s settings can be sa v ed to a personal computer or settings sav ed in a personal computer can be loaded into the unit f or use. Download The unit’ s settings are sa v ed in the personal computer .
78 W eb setting screen Other screen The images output from the unit can be s witched between camera images and color bars on this screen. CAM/BAR Camera The unit’ s output images are switched to “camera images”. Colorbar The unit’ s output images are s witched to “color bar”.
79 System log displa ys DDNS‑related error displa ys Category Display Description of error Connection error No response from the DDNS ser v er . A mistake ma y hav e been made in specifying the DDNS ser v er . Check the DDNS settings again. The DDNS ser v er ma y be down.
80 Limiter s This unit comes with settings (ref erred to as “limiters”) that restrict the panning and tilting movement r anges. Depending on where the unit has been installed, a subject which the user does not wish to be shot ma y be present in the mov ement ranges .
81 Setting/releasing the limiter s Basic limiter operations 1 Press the [MENU] button. T ap the button (rather than pressing it). When it is pressed f or 2 seconds, a menu will appear . If this happens, press the [MENU] b utton again f or 2 seconds to clear the menu.
82 Setting/releasing the limiter s Releasing the limiters The limiter positions that are set can be released by f ollowing the steps below . When the position is released, the tally lamp blinks twice . 1 Press one of the [CAM1] to [CAM4] buttons to select the unit.
83 Safe mode Concerning the safe mode The unit is equipped with a saf e mode for protection from damage. When a saf e mode is established, some or all of operations will no longer be accepted.
84 Notes on Windo ws Vista ® / Windows ® 7 When using Microsoft ® Windows Vista ® or Microsoft ® Windows ® 7, symptoms described in this document ma y happen. If any of them occurred, f ollow the instructions to solv e each problem. The symptoms that happen when using Windows Vista ® may also happen when using Windows ® 7.
85 Notes on Windo ws Vista ® / Windows ® 7 Precautions when using Windo ws Vista Symptom 1 When accessing the web browser , the follo wing message is displa yed on the inf or mation bar .
86 Notes on Windo ws Vista ® / Windows ® 7 Symptom 2 Easy IP Setup Software does not displa y the detected IP address. Solution Check the fire wall settings . If firewall is activ ated, add the web bro wser or Easy IP Setup Software to the [Exceptions] tab on the “Windows Fire wall Settings” menu.
87 Notes on Windo ws Vista ® / Windows ® 7 Symptom 4 The screens of the administrator console or the windows of the bro wser are not displa yed properly . (Ref er to the screenshot.) Solution Check the f ont siz e (DPI) of screenshot by clic king “P ersonalize”– “Adjust f ont siz e (DPI)”.
88 Notes on Windo ws Vista ® / Windows ® 7 Precautions when using Windo ws 7 Symptom 1 Screen is def or med. / When activating the compatibility vie w , par t of the screen is not display ed or a pop‑up window appears to sa y that the screen is not display ed again.
89 Notes on Windo ws Vista ® / Windows ® 7 Symptom 4 Software upgr ade is impossible e ven when selecting a file from the dialog bo x display ed from the window or tab to upg rade the software . Solution P erf orm the custom lev el setting on the “Security Settings” window .
F0510S0 D © P anasonic System Networks Co ., Ltd. 2010.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Panasonic 3TR006490BAA c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Panasonic 3TR006490BAA - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Panasonic 3TR006490BAA, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Panasonic 3TR006490BAA va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Panasonic 3TR006490BAA, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Panasonic 3TR006490BAA.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Panasonic 3TR006490BAA. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Panasonic 3TR006490BAA ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
