Manuel d'utilisation / d'entretien du produit TX-SR702 du fabricant Onkyo
Aller à la page of 96
E n AV Receiv er TX-SR702/702E TX-SR602/602E TX-SR8260 Instruction Manual Thank you for purchasing an Onkyo A V Recei ver . Please read this manual thoroughly before making any connections and plugging it in.
2 Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follo w all instructions. 5. Do not use this apparatus near water . 6. Clean only with dry cloth. 7. Do not block any ventilation openings.
3 Precautions F or U .S. Models Note to CA TV system installer: This reminder is provided to call the CA TV system installer’ s attention to Section 820-40 of the NEC which provides guidelines for p.
4 Precautions —Continued F or British models Replacement and mounting of an A C plug on the po wer supply cord of this unit should be performed only by qualified service personnel.
5 Features Amplifier • 7-channel amplifier • Optimum Gain V olume Circuitry • Zone 2 capability • 24-bit/192 kHz D/A con verters • WRA T (W ide Range Amplifier T echnology) • Color-code.
6 Ta b le of Contents Basic Introduction Important Safety Instructions .......................................................................................... 2 Precautions ...........................................................................
7 Ta b le of Contents —Continued Adv anced Controlling Other Components Entering a Remote Control Codes ................................................................................ 80 Learning Commands from Another Remote Contr oller ...........
8 Fr ont & Rear P anels Front P anel B Z Y W V U X 6 7 8 J K L N O R T P Q S M 1 C 4 5 9 B Z Y W V U X 6 7 8 J K L N O R T P Q S M 1 C 4 5 9 TX-SR702/702E TX-SR602/602E, TX-SR8260 ← Not American and Australian models ← Not American and Australian models ↑ Not American model TX-NR702,602_En.
9 Front & Rear P anels —Continued For detailed information, see the pages in parentheses. A PO WER switc h (38) American and Australian models don’ t hav e this switch. This is the main power switch. When set to OFF , the AV receiv er is completely shutdown.
10 Front & Rear P anels —Continued For detailed information, see the pages in parentheses. 1 MUTING indicator (54) This indicator flashes while the A V receiv er is muted. 2 REC OUT indicator (66) This indicator lights up when the REC OUT is selected.
11 Front & Rear P anels —Continued For detailed information, see the pages in parentheses. A COMPONENT VIDEO IN 1, 2, 3 (28, 30, 32) These component video inputs can be used to con- nect A V components with component video outputs, such as D VD players.
12 Front & Rear P anels —Continued M AC OUTLETS (38) These switched A C outlets can be used to supply power to other A V components. The type of outlet depends on the country in which you purchased your A V receiv er. Some models have a single outlet.
13 Remote Contr oller Notes: • The batteries should last for about six months, although this will vary with usage. • If the remote controller doesn’t w ork reliably , try replacing the batteries. • Don’t mix ne w and old batteries or dif ferent types of batteries.
14 Remote Controller —Continued In addition to controlling the A V receiv er, the remote controller has sev eral operating modes for controlling your other A V components, including Onkyo compo- nents connected via . Modes are selected by using the remote controller’ s REMO TE MODE b uttons.
15 Remote Controller —Continued A ST ANDBY button (38) This button is used to set the A V recei ver to Standby . B ON button (38) This button is used to turn on the A V recei ver. C INPUT SELECT OR buttons (53) These buttons are used to select the input source.
16 Remote Controller —Continued D VD mode is used to control an Onkyo D VD player con- nected to the A V receiv er via . To set the remote controller to D VD mode, pr ess the [D VD] REMO TE MODE button. A ST ANDBY button This button is used to set the D VD player to Standby .
17 Remote Controller —Continued N A-B button This button is used to set the A–B repeat playback function. O OPEN/CLOSE [ ] button This button is used to open and close the disc tray . P VIDEO OFF button This button is used to turn of f the internal video cir- cuitry , eliminating any possibility of interference.
18 Remote Controller —Continued MD/CDR mode is used to control an Onkyo MiniDisc recorder or CD recorder connected to the A V receiv er via . To select MD/CDR mode, press the [MD/CDR] REMO TE MODE button. By default, this b utton is set to control a MiniDisc recorder .
19 Remote Controller —Continued M FR & FF [ ]/[ ] buttons The FR [ ] button is used to start fast re verse. The FF [ ] button is used to start fast forward. N Stop [ ] button This button is used to stop playback. O RANDOM button This button is used with the random playback func- tion.
20 About Home Theater Thanks to the A V receiv er’ s superb capabilities, you can enjoy surround sound with a real sense of mo vement in your o wn home—just lik e being in a movie theater or concert hall. W ith D VDs you can enjoy DTS and Dolby Digital.
21 Connecting the A V receiver • Before making any A V connections, read the manuals supplied with your other A V components. • Don’t connect the po wer cord until you’ v e completed and double-checked all A V connections.
22 Connecting the A V receiver —Continued Speaker Configuration F or the best surround-sound e xperience, you should con- nect sev en speakers and a po wered subwoofer . The following table indicates the channels you should use depending on the number of speakers that you ha ve.
23 Connecting the A V receiver —Continued Speaker Connection Precautions Read the following before connecting your speak ers: • American model only: Only connect speakers with an impedance of 6 ohms or higher .
24 Connecting the A V receiver —Continued This section explains ho w to connect the supplied indoor FM antenna and AM loop antenna, and ho w to connect commercially av ailable outdoor FM and AM antennas. The A V receiv er won’t pick up an y radio signals without any antenna connected, so you must connect the antenna to use the tuner .
25 Connecting the A V receiver —Continued Connecting an Outdoor FM Antenna If you cannot achiev e good reception with the supplied indoor FM antenna, try a commercially av ailable out- door FM antenna instead. Notes: • Outdoor FM antennas work best outside, b ut usable results can sometimes be obtained when installed in an attic or loft.
26 Connecting the A V receiver —Continued By connecting both the audio and video outputs of your D VD player and other A V components to the A V receiv er, you can select both the audio and video simultaneously simply by selecting the appropriate input source on the A V receiv er.
27 Connecting the A V receiver —Continued Monitor Out ■ Using Composite Video Use a composite video cable to connect the A V receiv er’ s V MONITOR OUT jack to a composite video input on your TV , as shown. ■ Using S-Video Use an S-V ideo cable to connect the A V receiv er’ s S MONITOR OUT jack to an S-V ideo input on your TV , as shown.
28 Connecting the A V receiver —Continued Video Connections Y ou only need to use one of the following connection methods. ■ Using Composite Video Use a composite video cable to connect the A V receiv er’ s V D VD IN jack to the composite video output on your D VD player , as shown.
29 Connecting the A V receiver —Continued ■ Using a Multichannel Connection If your D VD player supports multichannel audio formats such as D VD-Audio, and it has a 5.
30 Connecting the A V receiver —Continued This section shows ho w to connect a VCR for playback so that you can watch videos via the A V receiv er. Video Connections • Use an S-V ideo cable to connect the A V receiv er’ s S VIDEO 1 IN jack to a S-V ideo output on your VCR, as shown.
31 Connecting the A V receiver —Continued This section explains ho w to connect a VCR for recording from a TV or another VCR. Video Connections • Use an S-V ideo cable to connect the A V receiv er’ s S VIDEO 1 OUT jack to an S-V ideo input on the recording VCR.
32 Connecting the A V receiver —Continued Video Connections Y ou only need to use one of the following connection methods. ■ Using Composite Video Use a composite video cable to connect the A V receiv er’ s V VIDEO 3 IN jack to a composite video output on your video source, as shown.
33 Connecting the A V receiver —Continued ■ Using Analog Connections If your video source doesn’t ha ve a digital audio output, or you want to record from it, you’ll need to mak e the following analog audio connection.
34 Connecting the A V receiver —Continued ■ Using Optical or Coaxial Connections If you connect to a digital audio input, you’ll need to assign it (see page 42). • Use an optical digital audio cable to connect one of the AV receiv er’ s OPTICAL DIGIT AL IN jacks to the optical output on your CD player , as shown.
35 Connecting the A V receiver —Continued ■ Using Optical or Coaxial Connections (playbac k only) If you connect to a digital audio input, you’ll need to assign it (see page 42). • Use an optical digital audio cable to connect one of the AV receiv er’ s OPTICAL DIGIT AL IN jacks to the optical output on your recorder , as shown.
36 Connecting the A V receiver —Continued For the TX-SR702/702E The A V receiv er’ s PHONO IN is designed for use with a moving magnet (MM) type cartridge. Use an analog audio cable to connect the A V receiv er’ s PHONO IN L/R jacks to the audio output on your turn- table, as shown.
37 Connecting the A V receiver —Continued If you want to connect a more po werful power amplifier and use the A V receiv er as a preamp, you can connect one to the PRE OUT jacks. In this case, you should con- nect all speakers and the subwoofer to that po wer ampli- fier .
38 Connecting the A V receiver —Continued The A V receiv er has A C outlets on its rear panel that can be used to connect the power cords of A V other compo- nents that you intend to use with the A V receiv er. These components can then be left turned on so that they turn on and off as and when the A V recei ver is turned on and set to Standby .
39 Fir st Time Setup This chapter explains the settings that you need to make before using the A V recei ver. W ith the supplied speaker setup microphone, the Auto- matic Speaker Setup function can me.
40 First Time Setup —Continued 3 Press [ENTER]. The automatic speaker setup starts. The test tone is output by each speaker in turn, measured by the microphone, and the speaker settings set accord- ingly .
41 First Time Setup —Continued The A V receiv er is configured using onscreen setup menus, which are displayed on the TV that’ s connected to either of the MONITOR OUT jacks. Because the y appear on your TV , they’ re large and clear , making setup a breeze.
42 First Time Setup —Continued Digital Input If you connect a component to a digital input jack, you must assign that jack to an input selector . F or example, if you connect your CD player to the OPTICAL IN2 jack, you should assign that jack to the CD input selector .
43 First Time Setup —Continued Component Video Setup If you connect to a COMPONENT VIDEO IN, you must assign it to an input selector . F or example, if you connect your D VD player to COMPONENT IN 3, you should assign it to the D VD input selector .
44 First Time Setup —Continued Minimum Speaker Impedance (not American models) If the impedance of any of the connected speakers is 4 ohms or more, but less than 6 ohms, set the Minimum Speaker Impedance to “4 ohms. ” Note: Before you change this setting, turn down the v olume.
45 First Time Setup —Continued TV Format Setup (not American models) Here you can specify the TV format used in your area. Note: • This procedure can also be performed on the A V receiv er by using its [SETUP] button, arro w buttons, and [ENTER] button.
46 First Time Setup —Continued Some of the settings in this section are set automatically by the Automatic Speaker Setup function (see page 39). Here you can check the settings made by the Automatic.
47 First Time Setup —Continued Crosso ver Notes: • If the crossov er frequency is set to a lo w value, and the program material doesn’t contain an y sounds below that frequency , the subwoofer will not output much sound. 6 Use the Up and Down [ ]/[ ] b uttons to select “c.
48 First Time Setup —Continued Double Bass W ith the Double Bass function, you can boost bass out- put by feeding bass sounds from the front left and right channels to the subwoofer . This function can be set only if the Subwoofer setting in step 4 is set to Y es, and the Front setting in step 5 is set to Large.
49 First Time Setup —Continued Notes: • On the TX-SR702/702E, if the distance between the furthest and nearest speakers is greater than 20 feet (6 meters), corrected values suitable for home theater use will be set automatically . • On the TX-SR602/602E and TX-SR8260, the Center and Subwoofer distances can be set up to 5 ft.
50 First Time Setup —Continued Speaker Level Calibration Here you can adjust the lev el of each speaker with the b uilt-in test tone so that the v olume of each speaker is the same at the listening position.
51 First Time Setup —Continued Equalizer Setting Here you can adjust the EQ of individual speak ers. The volume of indi vidual speakers can be set on page 50. Notes: • This procedure can also be performed on the A V receiv er by using its [SETUP] button, arro w buttons, and [ENTER] button.
52 First Time Setup —Continued If you connect an -compatible Onkyo MiniDisc recorder or CD recorder to the T APE IN/OUT jacks, for to work properly , you must change this setting.
53 Basic Operation This section explains ho w to select the input source (i.e., the A V component that you want to listen to or watch). Selecting the Input Source 1 3 3 1 1 1 Use the A V receiver’ s input selector buttons to select the input source.
54 Basic Operation —Continued Y ou can adjust the brightness of the display . Y ou can temporarily mute the output of the A V receiv er. W ith the sleep timer , you can set the A V receiv er to auto- matically turn off after a specified period.
55 Basic Operation —Continued Y ou can display various information about the current input source as follows. The following information can typically be displayed for input sources. *If the input signal is analog, no format information is displayed.
56 Basic Operation —Continued W ith the built-in tuner you can enjo y AM and FM radio stations. Y ou can store your fav orite stations as presets for quick selection. Listening to the Radio T uning into Radio Stations ■ A uto T uning Mode When tuned into a station, the TUNED indicator appears.
57 Basic Operation —Continued Presetting Radio Stations Y ou can store up to 40 of your fa vorite radio stations as presets. Selecting Preset Stations Deleting Presets Displaying Radio Inf ormation 1 T une into the station that you want to store as a preset.
58 Basic Operation —Continued Using RDS (European models onl y) RDS only works with European models and only in areas where RDS broadcasts are av ailable. ■ What is RDS? RDS stands for Radio Data System and it’ s a method of transmitting data in FM radio signals.
59 Basic Operation —Continued Displaying Radio T e xt (RT) When tuned to an RDS station that’ s broadcasting R T text information, that information can be displayed. Notes: • The message “W aiting” may appear while the A V receiv er waits for R T information.
60 Basic Operation —Continued See “ About the Listening Modes” on page 62 for detailed information about the listening modes. Selecting on the A V receiver ■ [PURE A UDIO] b utton (not American TX-SR602) This button selects the Pure Audio listening mode.
61 Basic Operation —Continued The following table lists all the listening modes and sho ws which modes can be selected for each input signal format. Input signal format Analog, PCM*1 1. In the Pure Audio and Direct listening modes, PCM signals at 32 kHz, 44.
62 Basic Operation —Continued About the Listening Modes W ith its built-in surround-sound decoders and DSP pro- grams, the A V receiv er can transform your home listen- ing room into a movie theater or concert hall. If you connect two surround back speakers (i.
63 Basic Operation —Continued DTS-ES Matrix This is DTS with an added surround back channel for 6.1 surround sound. Use it to provide 6.1 channel surround playback with program material recorded in DTS 5.1 format. Since DTS 5.1 program material contains surround back channel informa- tion, all channels can be reconstructed for 6.
64 Ad v anced Operation W ith the Late Night function, you can reduce the dynamic range of Dolby Digital material so that you can still hear quiet parts ev en when listening at low v olume lev els—ideal for watching movies late at night when you don’t w ant to disturb anyone.
65 Adv anced Operation —Continued Y ou can adjust the lev el of individual speak ers during playback. These adjustments are temporary and will be cancelled when the A V receiv er is set to Standby . Notes: •Y ou cannot use this function while the A V receiv er is muted.
66 Adv anced Operation —Continued This section explains ho w to record the current input source, how to record one input source while enjo ying another , and how to dub audio onto your video record- ings.
67 Adv anced Operation —Continued AV Recording Y ou can record A V input sources to an A V recording component (VCR, etc) connected to the VIDEO 1 OUT or VIDEO 2 OUT .
68 Ad v anced Setup Here are surround-related settings for PCM, Dolby Dig- ital, multichannel, and other input signal formats. Note: • This procedure can also be performed on the A V receiv er by using its [SETUP] button, arro w buttons, and [ENTER] button.
69 Adv anced Setup —Continued ■ c. SurrBack Mode This setting determines which surround mode is used for Dolby Digital input signals that don’t contain a Dolby Digital EX flag, or when the b . Dolby EX setting is set to Manual. This setting is una vailable if no surround back speakers are connected.
70 Adv anced Setup —Continued Y ou can adjust the bass and treble for the front speakers, except when the Direct, Pure Audio (not American TX-SR602), or THX listening mode is selected. ■ Bass Y ou can boost or cut low-frequenc y sounds output by the front speakers from –10 dB to +10 dB in 2 dB steps.
71 Adv anced Setup —Continued 4-1. Mono ■ a. Output Channel This setting determines which speakers are used to out- put mono audio when the Mono listening mode is used. L/R: Mono audio is output from the front left and right speakers (default). Center: Mono audio is output from the center speaker .
72 Adv anced Setup —Continued 4-9. Theater-Dimensional These settings apply to the Theater -Dimensional listen- ing mode. ■ a. Listening Angle W ith this setting, you can specify the angle of the front left and right speakers relati ve to the listening position.
73 Adv anced Setup —Continued Note: • This procedure can also be performed on the A V receiv er by using its [SETUP] button, arro w buttons, and [ENTER] button. 4 Use the Up and Down [ ]/[ ] buttons to select the signal f or- mat that you want to set, and then use the Left and Right [ ]/ [] buttons to select a listening mode.
74 Adv anced Setup —Continued This section explains the items on the Preference menu. Note: • This procedure can also be performed on the A V receiv er by using its [SETUP] button, arro w buttons, and [ENTER] button. 6-1. IntelliV olume W ith this preference, you can set the input lev el for each input source.
75 Adv anced Setup —Continued 6-3. OSD Setup ■ a. Immediate Display This preference determines whether or not actions, such as selecting an input source, are displayed onscreen. Normal: Select if your TV is 4:3. Wide: Select if your TV is 16:9. Off: Actions not displayed.
76 Zone 2 W ith the Zone 2 function, you can enjoy one input source in the main room and a different source in another room. There are two connection methods: using a recei ver/inte- grated amp in Zone 2 or using only a pair of speakers in Zone 2. Using a Receiver/Integrated Amp in Zone 2 W ith this connection method, you can use 7.
77 Zone 2 —Continued To use Zone 2, you must make this setting. It enables the speakers connected to the ZONE 2 SPEAKERS termi- nals so that they produce sound when Zone 2 is used. Note: • This procedure can also be performed on the A V receiv er by using its [SETUP] button, arro w buttons, and [ENTER] button.
78 Zone 2 —Continued Here you can turn on Zone 2, select an input source, and adjust the volume. Note: To control Zone 2 with the remote controller, you must press the [ZONE 2] button first. Notes: • If the Sleep function has been set, the Zone 2 compo- nent will turn off along with the A V recei ver when the specified sleep time expires.
79 Zone 2 —Continued Using the 12V T rigger When Zone 2 is turned on, the ZONE 2 12V TRIGGER OUT outputs 12 volts (100 milliamperes max). By con- necting this jack to the 12-volt trigger input on, say , a power amp in Zone 2, that po wer amp will turn on and off automatically as and when Zone 2 is turned on and off on the A V recei ver.
80 Contr olling Other Components Y ou can use the A V Recei ver’ s remote controller (RC- 588M/RC-590M/RC-591M) to control your other com- ponents, including those made by other manufacturers. This chapter explains ho w to: • Enter the remote control code for a component that you want to control (e.
81 Controlling Other Components —Continued Resetting REMO TE MODE Buttons If you’ ve entered another code for one of these b utton and now w ant to return to the default, perform the fol- lowing procedure. By default, some REMO TE MODE b uttons are prepro- grammed with remote control codes for controlling Onkyo components connected via .
82 Controlling Other Components —Continued Remote Control Codes When two or more codes are gi ven, try each one in turn, and choose the one that works best. Depending on the manufacturer and component, the remote controller may not work as expected.
83 Controlling Other Components —Continued SA T (satellite receiver) Manufacturer Control code Tr istar 4016 Unisat 4013 Universum 4021, 4024 Vo r tec 4017 Wela 4025 Zehnder 4020 Zenith 4032 CBL (ca.
84 Controlling Other Components —Continued VCR Manufacturer Control code RCA 2001, 2002, 2003, 2008, 2010, 2013, 2021, 2023, 2025, 2026, 2027 Realistic 2007, 2008, 2010, 2011, 2012, 2017 Rex 2048 Ro.
85 Controlling Other Components —Continued TV Manufacturer Control code Loewe 1014, 1040, 1055 Luxman 1004, 1006 LXI 1001, 1006, 1010, 1014, 1016, 1017, 1034 M Electronic 1035, 1053, 1062, 1063 Magn.
86 Controlling Other Components —Continued To control another component, point the remote control- ler at it and use the buttons as e xplained below (you must select the appropriate remote control mode first).
87 Controlling Other Components —Continued Controlling a VCR The following b uttons control the A V Receiv er . [V OL]: Adjusts the v olume of the A V receiver. [MUTING]: Mutes the A V Recei ver . Controlling a Satellite Receiver The following b uttons control the A V Receiv er .
88 Controlling Other Components —Continued The A V receiv er’ s remote controller can learn the com- mands of other remote controllers simply by pointing them at each other .
89 Controlling Other Components —Continued W ith the Macro function, you can program the remote controller’ s MA CR O b uttons to perform a sequence of actions with just one button press. F or example, nor - mally you need to perform the following actions to play a CD: 1.
90 Tr oubleshooting If you hav e any trouble using the A V receiv er, look for a solution in this section. If you can’t resolv e the issue yourself, contact your Onkyo dealer . Can’t turn on the A V receiver? • Make sure that the po wer cord is properly plugged into the wall outlet.
91 Tr oubleshooting —Continued The subwoof er produces no sound? • When you play source material that contains no infor- mation in the LFE channel, the subwoofer produces no sound.
92 Tr oubleshooting —Continued Reception is noisy , FM stereo reception is noisy , or the FM STEREO indicator doesn’t appear? • Relocate your antenna. •M ove the A V receiver a way from your TV or com- puter . • Listen to the station in mono (page 56).
93 Tr oubleshooting —Continued The sound changes when I connect m y head- phones? • When a pair of headphones is connected, the listening mode is set to Stereo, unless it’ s already set to Stereo, Direct, or Pure Audio (not all models). When you dis- connect the headphones, the previous listening mode will be resumed.
94 Specifications (TX-SR702/702E) Amplifier Section Video Section T uner Section ■ FM ■ AM General ■ Video Inputs ■ Video Outputs ■ A udio Inputs ■ A udio Outputs ■ Other Jacks Specifications and features are subject to change without notice.
95 Specifications (TX-SR602/602E, TX-SR8260) Amplifier Section Video Section T uner Section ■ FM ■ AM General ■ Video Inputs ■ Video Outputs ■ A udio Inputs ■ A udio Outputs ■ Other Jacks Specifications and features are subject to change without notice.
96 MEMO SN 29343831C I0409-4 (C) Copyright 2004 ONKY O CORPORA TION Japan. All rights reser ved. http://www.onky o.com/ HOMEP A GE Sales & Product Planning Div. : 2-1, Nisshin-cho, Neyagawa-shi, OSAKA 572-8540, JAPAN Tel: 072-831-8023 Fax: 072-831-8124 ONKYO U.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Onkyo TX-SR702 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Onkyo TX-SR702 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Onkyo TX-SR702, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Onkyo TX-SR702 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Onkyo TX-SR702, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Onkyo TX-SR702.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Onkyo TX-SR702. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Onkyo TX-SR702 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
