Manuel d'utilisation / d'entretien du produit i-Watcher Pan/Tilt Internet IP Camera du fabricant Edimax Technology
Aller à la page of 45
i i - - W W A A T T C C H H E E R R Pan / T ilt Internet IP Camera User Manual Version 1.0 March. 2006 1.
T able of Contents 1. System Features 1-1.Package Contents 1-2.System Requirements 1-3.Hardware Description and Features 1-4.i-W A TCHER Hardware S pecification 2. Inst allation 2-1. i-W A TCHER Hardware Setup 2-2. i-W A TCHER Hardware Setup (Wireless LAN Setup) 2-3.
8-3-3. Motion detected mail 8-3-4. Motion detected message on the main window . 8-3-5. FTP uploads when motion detected. 8-4.Alert IN Setup 8-4-1.Alert IN Setup 8-4-2.Alert IN with motion detected mail function(mail setting) 8-4-3.Motion detected mail (Alert IN Enabled) 8-4-4.
14. Network Utilities 14-1. Determining your IP Address and Network Settings 14-2. Using PING 14-3. IPEdit search tool 15. POE(Power over Ethernet) Function 16. Pan and T ilt Control 16-1.Control the camera in the main window 16-2.Position Points Pre setting 16-3.
O V E R V I E W 1. System Features Remote Surveillance Becomes Handy i-W atcher IP-Cam network camera let you monitor your surveillance system remotely anywhere around the world.
Audio and V i deo Recording Function With the highly sensitive built-in microphone, i-W atcher IP-Cam provide you with the recording of audio and video function, unlike those in the market where you can only record video without the audio.
1-3. Hardware Description and Features z S tand-alone network camera for flexible inst allation. z Simple installation and multiple mounting methods. z Embedded Web Server Supported. z No computer is needed at the monitored site. z Access live video via web brows er at anytime and any place for remote surveillance and management.
Wireless LAN z Support USB Wireles s Dongle for IEEE802.1 1 b and g z Zydas Chipset WiFi USB Dongle z E-Mail the Detected Images to preset e-Mail address. z FTP the Detected Images to preset FTP server . Motion Detection z Software Real-T ime Motion Detec t ion.
2. Inst allation Before installing the i-W A TCHER, you s hould have an available Ethernet LAN connection (RJ-45 port). To view the camera’s image or make any manual configuration changes, you will need a Windows PC with Inter net Explorer 6.0 or higher and connection to the LAN.
Step 4 . Ensure the Camera power light is lighting When the i-W A TCHER is connected with power, the LED light on top of the i-W A TCHER will light up. This indicates that the i-W A TCHER is powered on. W ait 45 sec to 60 sec, camer a will auto pan tilt and moving camer a center Step 5.
2-2. i-W A TCHER Hardware Setup (Wireless LAN Setup) The i-W A TCHER provides a USB port for extra device. Check the diagram for extra function i-W A TCHER IP-Cam support wireless LAN U SB Dongle, the USB port in camera back panel.
9. Use IE Browser to watch IP-cam image (wireless mode) 10. If you can find camera in IP-EDIT list and see camera video from IE, than mean is your camera wireless setup complete, w hen camera in wireless mode, IP-Edit software can’t change any setting, you must use IE into setup p age to change camera setting.
3. Accessing the i-W A TCHER 3-1. Change the i-W A TCHER IP S tatus Using the IPEdit.exe, you could select the different network options. The PC network options will displa y the Gateway and Net mask network settings, Which you can edit with IPEdit.
3-2. On the LAN with DHCP Server 1. Use IPEDIT.EXE to find the installed i-W A TCHER . 2. Select this i-W A TCHER in the Camera Lists Window. 3. The default configurati ons will be shown in the right window. 4. Update the Camera’s IP status. 3-3. On the LAN without DHCP Server 1.
A. Setup the mapping of HTTP Port (80) to 192.168.0.49. B. Restart the ADSL router . Then the i-W A TCHER can be accessed from W A N, by the ADSL W AN IP Address.
3. Select “Y es“ then press “Set” button , check box will enable the user check when the users want to access the i-W A TCHER. The login window will prompt for the User name and Password. 6. Camera Control On the IE Browser , right mouse click on t he video to activate a pop-up menu.
To control the camera, use the “+” to increase, “-“ to decrease it, or “ STD ” to return to default value. 6-5.Operation Mode Continuous Mode: The i-W A TCHER will alwa ys try to capture the image as fast as possible. This is the default setting.
8. Configuration Only the administrator can se lect the “Configuration”; the ordinary user account does not have this privilege to access this function. The screen is the main menu for configuration setting, when the administrator selects the “Conf iguration” in the main window .
8-1. System Setup 8-1-1. Camera Name The camera name can be set on the “Camera Name” field, and select “change “ to summit it . 8-1-2. Camera’s ti me Select “ NTP ” button X Key in the Sever IP address lik e: http://www.
8-2. User Setup 8-2-1. User Management User authorization required: Checking the Enable us e check function will enable the user check when the users want to Access the i-W A TCHER. The Login window will prompt for the User name and Password. If the check box is not checked, then the user check will not be enabled.
8-3-2. Motion detected mail function (Mail Setting) When motion detection is enabled, the user c an setup the mail function to send the motion-detected images to the preset mail address. The procedures are as follow: X Motion Detect set to “Enable” state.
8-3-5. FTP uploads when motion detected. The motion-detected images can also be uploaded to FTP server . The procedures are as follow: X Enter the IP address or domain name of the “FTP Server”. Y Enter the “Username” and “Password” of the FTP server .
8-4-2. Alert IN with Motion detected mail function (Mail Setting) When motion detection and Alert IN is enabled, the user can setup the mail function to send the motion-detected images to the preset ma il address. The procedures are as follow: X Motion Detect set to “Enable” state.
8-4-7. FTP uploads when motion de tected (Alert IN Enabled) The motion-detected images can also be uploaded to FTP server . The procedures are as follow: X Enter the IP address or domain name of the “FTP Server”. Y Enter the “Username” and “Password” of the FTP server .
] Enter the “User” and “Password” fields with the account and pa ssword provided by the ISP . If the “Mail after dialed” check box is checked, the mail will be automatically sent when connected automat ically to the ISP .
9. Snap shot s 9-1.Snap shots Click “Snapshot” button, the Panel wil l appear the image, save as file. ¨ 26.
10. Image Recording 10-1. Save as JPEG 1. Select “Image Recording…” 2. The “Image Recording” pop-up window displays. Check the “ Save as JPEG ” check box option.
[ Selecting the “No Limit” radio butt on will save the video file until the “ Stop Image Recording ” is selected. For each AVI file, the maximum number of images that can be saved in each fil.
12. Hardware Reset Function Use Pin to push Reset button hole 10 sec, the Camera will reset , mean is all setup value back T o factory default. When you want to reset camera, the camera must in Power on status.
A word about terminology The term gateway is used generically to define a device that connects a local network to the Internet. A gateway may be a router , a PC runni ng software which allows it to act as a gateway such as a proxy server , or some other device.
13-4. Default Gateway Devices (PCs, cameras, etc.) on your network connect to the Internet via a gateway. For most home networks, a NAT ty pe router serves as the gat eway.
14-2. Using PING PING is a very useful utility for checking to see if a camera is responding or checking to see if an IP address is available. In Windows 98/Me, PING is located in C: Windows. In Windows 2000/XP , PING is located in C: WindowsSystem32.
How to use i-W A TCHER POE Function? 15. PoE (Power Over Ethernet) Function What is Power over Ethernet? Power over Ethernet (also referred to as PoE or Power over LAN) is a technology that integrates power into a standard LAN infrastruc ture.
16. Pan and T ilt Control 16-1. Control the camera in the monitor window Click on the monitor image, and the camera moves so that the clicked portion goes to the center of the display 16-2. Position point s presetting Click the preset position number button from the preset points.
17. HTML Code for your website or blog Y ou can show camera video in your website or blog, add HTML code into your website or download sample code from http://www .iwa t cher .net/ipcam/code_samples/IC-5000PT .html Note: <script> function addElement() { var newdiv = document.
18. i-W A TCHER Inst allation Method i-W A TCHER Installation Method 1: Internet Access Mode: Leased Li ne, ADSL or Cable Modem Real IP Address: A few S tatic IP addresses required IP Sharing or LAN H.
i-W A TCHER Installation Method 2: Internet Access Mode: Leased Li ne, ADSL or Cable Modem Real IP Address: 1 S tatic IP address required IP Sharing or LAN Hu b: Enabled with DHCP function i-W A TCHER.
i-W A TCHER Installation Method 3: Internet Access Mode: Dial- up ADSL or Cable Modem Real IP Address: A dynamic IP address provided by the ISP IP Sharing or LAN Hub: E nable DHCP and NA T function i-.
i-W A TCHER Installation Method 4: Internet Access Mode: Leased Li ne ADSL or Cable Modem Real IP Address: 1 S tatic IP address required IP Sharing or LAN Hub: Not required i-W A TCHER Network Setup: .
i-W A TCHER Installation Method 5: Internet Access Mode: Dial- up ADSL or Cable Modem Real IP Address: A dynamic IP address provided by the ISP IP Sharing or LAN Hub: Not required i-W A TCHER Network .
i-W A TCHER Installation Method 6: Internet Access Mode: Dial- up ADSL or Cable Modem Real IP Address: A set of dynamic IP addresses provided by the ISP IP Sharing or LAN Hub: Must come with DHCP and .
i-W A TCHER Installation Method 7: Internet Access Mode: Leased Li ne, ADSL or Cable Modem Real IP Address: 1 S tatic IP address required IP Sharing or LAN Hub: Must come with DHCP and NA T function i.
i-W A TCHER Installation Method 8: Internet Access Mode: Leased Li ne ADSL or Cable Modem Real IP Address: 1 S tatic IP address required IP Sharing or LAN Hub: E nable DHCP and NA T function i-W A TCH.
i-W A TCHER Installation Method 9: Internet Access Mode: Dial- up ADSL or Cable Modem Real IP Address: A dynamic IP address provided by the ISP IP Sharing or LAN Hub: Must come with DHCP and NA T func.
i-W A TCHER Installation Method 10: Internet Access Mode: Leased Li ne ADSL or Cable Modem Real IP Address: 1 S tatic IP address required IP Sharing or LAN Hub: Must come with DHCP and NA T function i.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Edimax Technology i-Watcher Pan/Tilt Internet IP Camera c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Edimax Technology i-Watcher Pan/Tilt Internet IP Camera - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Edimax Technology i-Watcher Pan/Tilt Internet IP Camera, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Edimax Technology i-Watcher Pan/Tilt Internet IP Camera va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Edimax Technology i-Watcher Pan/Tilt Internet IP Camera, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Edimax Technology i-Watcher Pan/Tilt Internet IP Camera.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Edimax Technology i-Watcher Pan/Tilt Internet IP Camera. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Edimax Technology i-Watcher Pan/Tilt Internet IP Camera ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
