Manuel d'utilisation / d'entretien du produit 52600 du fabricant AEG
Aller à la page of 36
LAVAMA T 52600 Wa s h i n g m a c h i n e User information.
2 Dear Customer , Please read this user information car e fully and keep it to r efer to later . Please pass the user information on to any futur e owner of the appli- ance. The following symbols are used in the text: 1 Safety instructions War n i n g ! Information that affects your per sonal safety .
3 Contents Oper ating Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Disposal . . . . .
4 Installation and conn ection instructions . . . . . . . . . . . . . . . . . 24 Safety information concerning installation . . . . . . . . . . . . . . . . . . . . . . . . 24 Installing the appliance . . . . . . . . . . . . . . . . . . . . . . . . . .
5 Oper ating Instructions 1 Safety Prior to using the appliance for the first time • Follow the “Installation and connection instructions” . • If the appliance is delivered in the winter months when ther e ar e mi- nus temperatur es: store the washing machine at r oom temperatur e for 24 hours befor e using for the first time.
6 • Switch off the washing machine prior to cleaning it and carrying out maintenance. In addition, remove the power plug fr om the power point or – if the appliance has been har d-wired – sw itch off the cut- out in the fuse box or completely remove the fuse.
7 Description of the appliance Contr ol panel Deterg ent drawer Screw feet (height adjustable) Plinth flap/ Drain pump Rating plate (behind door) Control panel DELA Y TIMER button Spin/RINSE HOLD butt.
8 Pr ogr amme overview Programme max. load 1) (dry washing) 1) A 1 0 litre bucket contains appr ox. 2.5 kg of dry washing (cotton) Additional pro- gramm es Spin speed RINSE HOLD PRE W ASH TIME SAVER 1.
9 Application/Features Car e sym- bols 1) 1) The figures in the care symbols indicate the maximum temper atures. Energy-savi ng progr amme at 60°C for lightly to normally soiled whites/col- oureds mad e of cotton/linen. M O Progr amme for normally to heavily soiled co loureds/whites made of cotton/ linen.
10 Befor e the first wash 1. Open the detergent dr awer . 2. P our approx. 1 litr e of water through the detergent dr awer into the washing machine. This closes the water container when the next pr ogramme is started and the economy valve can function properly .
11 Running a wash cycle Opening the door/loading washing 1. Open the door: pull the handle on the door . When the appliance is switched on , th e DOOR and START/P AUSE indic a- tors show whether the door can be opened: 2. Separate washing and load loosely .
12 1. Pull out the detergent dr awer as far as it will go. 2. Add the detergent/condit ioner . 3. Push the deter gent drawer in fully . Washing powder/tablets fo r the main wash cycle If you are using.
13 Changing the spin speed /selecting rinse hold The washing machine sugges ts the maximum permitted spin speed suitable for the selected pro- gramme. Y ou can reduce this spin speed: To do this, pr ess the Spin/RINSE HOLD button repeatedly until th e requir ed speed is indicated.
14 Activating/deactivating RINSE+ If RINSE+ is activated, two addition al rinse cycles take place with the progr ammes COTT ONS/LINEN, EASY -C ARES/EASY IRON and DELICATES. RINSE+ remains permanently saved – even after the appliance has been switched off.
15 Starting a pr ogramme 1. Check that the tap is turned on. 2. Press the ST ART / PAUSE button. The pr ogr amme is started or will start after the delay timer has counted down. During the wash progr amme the curr ent stage of the progr amme will be shown in the progr amme progr ess display .
16 If RINSE HOLD has been selected: Following a rinse hold DOOR and END will illuminate in the progr amme progr ess display . First the water must be drained: – Either turn the progr amme selector t.
17 Cleaning and car e Important: Do not use furniture cleaning pr oducts or aggressive clean- ing agents to clean the appliance. Wipe over the control panel and housing with a damp cloth. Deter gent drawer The detergent dr awer should be cleaned r egularly .
18 What to do if... Remedying small faults yourself If the progr amme progr ess display in dicates one of the following fault codes during operation: – END flashes 1x (problem with water inlet), – END flashes 2x (problem with water outflow), – END flashes 4x (door open), please consult the following table.
19 The washing machine vibrat es when oper ating or is unstable. The transit packaging has not been removed. Remove the transit p ackag- ing. The screw feet have not been correctly adjusted. Adjust the feet as described in the installation and con- nection instructions.
20 If the wash r esult is not satisfactory The washing is grey and there ar e limescale deposits in the drum • Too little deter gent was used. • An incorrect deter gent was used. • Individual stains were not pr e-treated. • The progr amme or temperatur e was not set pr operly .
21 Carrying out an emer gency drain 1 War n i n g ! Prior to carrying out an emergency dr ain, switch off the washing machine and remove the pow er plug fr om the power point. War n i n g ! The water that comes out of the emergency dr ain hose may be hot.
22 Dr ain pump The drain pump is maintenance-fr ee. It is only necessary to open the pump cover if there is a malfunction and water is no longer being pumped out, e.g. if the pump wheel is blocked. Before loading the machine, please always ensure that ther e are no for- eign bodies present in the pockets or in between the items to be washed.
23 T echnical data 5 This appliance conforms with the following EU Directives: – 73/23/EEC dated 19.02.1973 Low V oltage Directive – 89/336/EEC dated 03.
24 Installation and connection instructions 1 Safety information concerning installa- tion • This washing machine cannot be built-in . • Before using for the fir st time, ch eck the appliance for damage sus- tained while it was being transpor ted.
25 Installing the appliance T ransporting the appliance 1 War n i n g : The washing machine is very heavy . There is a risk of injury . Exercise car e when lifting the appliance. • Do not lay the w ashing machine on its front nor on its right side (as seen fr om the front).
26 3 Special spanner A and sealing caps B (2 units) and C (1 unit) come with the appliance. 3. Use special spanner A to remove screw D and the compr ession spring. 4. Use sealing cap C to cap the hole. 5. Use special spanner A to remove the two screws E.
27 Making the appliance level The four feet of the appliance are pre-adjusted. Large degr ees of unevenness can be compensated for by adjusting the four feet of the appliance. Use the special spanner supplied to do this. Important: Do not use pieces of wood, cardboar d or such like to level out small degr ees of unevenness in the floor .
28 • The wire colour ed blue must be connected to the terminal “N“ or coloured blac k. • The wire colour ed brown must be connected to the terminal marked “L“ or colour ed r ed. • Upon completion there must be no cut , o r s t ray st ra nd s o f wi re present and the cor d clamp must be secure over the outer sheath.
29 Connecting the appliance to the water supply Important: • This appliance must not be connected to the hot water supply . • When connecting the appliance, use only new hose ki ts.
30 W ater inlet A 1.35 m long pressure hose is supplied with the appliance. If a longer inlet hose is required, only hoses fr om the manufacturer ar e to be used. Service Force stocks hose kits of differ ent lengths. 3 Sealing rings are either inserted in th e plastic nuts of the thr eaded hose fitting or are included as spar e pa rts.
31 Wa t e r D ra i n a g e The appliance drain hose should hook into a standpipe, the hook in the drain hose is formed usin g the plas tic “U-Piece“ supplied. The standpipe should have an internal diameter of approximately 38 mm (see dia- gram) thus ensuring ther e is an air br eak between the drain hose and standpipe.
32 Pumping heights of over 1 metr e The washing machine’s drain pump is able to pump water to a height of 1 me tre, calculated fr om the surface on which the appliance is installed. Important! If pumping height is over 1 metre malfunctions and dam- age to the appliance may arise.
33 W arr anty conditions Gr eat Britain Standard guarantee conditions We, AEG, undertake that if withi n 12 months of the date of the purchase this AEG appliance or any part ther eof is prove d to be .
34.
35 Service and Spar e P arts If the event of your appliance r equir ing service, or if you wish to pur- chase spare parts, please contact Service For ce by telephoning: Y our telephone call will be automatically routed to the Service For ce Centre covering your post code area.
From the El ectrolux Gr oup . The world´s No.1 choice. The Electrolux Gr oup is the world´s largest pr oducer of powere d appliances for ki tchen, cleaning and outdoor use.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté AEG 52600 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du AEG 52600 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation AEG 52600, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le AEG 52600 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le AEG 52600, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du AEG 52600.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le AEG 52600. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei AEG 52600 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
