FR
Notice d'utilisation officielle

Ruby Fires Riano

32 pages·2.6 MB·Cheminée·PDF·ENITJA
Ruby Fires Riano
Table des matières 6 sections DE Bio Fireplace Bedienungsanleitung · Serra · Kamine · Corato · … AfficherMasquer
Page 1 of the Ruby Fires Riano user manual
Page 1 · cliquer pour agrandir
Page 1

Thank you for purchasing this bio-ethanol fireplace. You have purchased a quality product that will last you many years when used properly.

Please read this installation guide and user’s manual carefully before installing and using the fireplace.

This fireplace contains no asbestos products.

Location: A bioethanol fireplace can be placed anywhere, e.g. in a living room but also in a bedroom, the (residential) kitchen, chalet or mobile home.

One of the advantages of bioethanol fireplace is that it can be easily placed and moved. If you change your furniture, simply move your fireplace to another location. In addition, the cost of investment in a bio-ethanol fireplace is low, especially compared to traditional fireplaces and stoves. Besides atmosphere fireplaces also supply heat, sufficient for a comfortable level of heating. The device is not designed to function as a primary heat source.

Place the fireplace in a room with a minimum contents of 32m3 (WxLxH of the room). Make sure the room in which the fire is installed has sufficient ventilation possibilities. For the Serra/Corato this is 100cm2, it may spread over several vents. The stove Riano is designed to be used in combination with surrounds Baza, Elda and Adra.

Before using the fire, carefully remove the protective film of the insert and the stainless steel burner.

  • Benefits of bio-ethanol fires:
  • Real flames
  • Provides heat
  • Easy to install
  • No special adjustments (e.g. flue) necessary
  • Virtually no emission of hazardous fumes especially compared to, for example gel and wood fires.

Warranty: The warranty on this product is 2 years. Any changes on the surface or inside of the ceramic burner, due to the usage of the product, are not included in the warranty of the ceramic burner. Ruby Fires reserves the right to make any technical alterations in order to improve the pro- duct and its characteristics / safety. Ruby Fires would like to thank you for the purchase of the ceramic burner. If all the instructi- ons are carefully followed, the ceramic burner will burn free of soot and scent.

Intro

Page 2 of the Ruby Fires Riano user manual
Page 2 · cliquer pour agrandir
Page 2

Installation Serra & Corato:

  • Remove the packaging and check if all parts of the fireplace are intact, if not please contact your dealer.
  • The bioethanol fire has to be mounted stable and steadily, using the supplied wallbrackets
  • Carefully decide where the fire is to be mounted
  • The wall-bracket is to be fixed horizontally. Use the supplied level.
  • Attach the wall bracket to the back wall, the supplied screws and plugs. The supplied plugt can be used for stone or concrete walls.
  • Hang the fire on the wall-bracket
  • Place the security hook on the bottom of the fire, use the supplied material.
  • Only mount the fire to a vertical, steady, stable and fireproof wall
Ruby Fires Riano diagram (page 2)
Fig. 1

Installation in the surround:

  • Remove the packaging and check if all parts of the fireplace are intact, if not please contact your dealer.
  • Remove the L-shaped brackets on the sides of the fireplace.
  • Place the insert into the opening of the surround. Attach the L-shaped brackets back to the sides of the insert, press firmly to the surround before securing the straps.
  • Attach the 2 connectors provided to the corners of the burner with the provided bolts. The bolts are attached on the bottom side. Then place the glass shield in the connectors and tighten the hex bolt by hand.
  • Make sure the surround is levelled

Make sure the fire is levelled horizontally and that the back of the fire is placed parallel to the wall behind it (vertically). Due to the production of heat around the fire, the backwall can change in colour over time.

Installation of the glass screens: The glass screens should be mounted on the burner. To do this please use the enclosed conectors + bolts. This will prevent the airflow pushing against the back wall. It is also used to control the slide on top of the burner. With two hands you can move the slide forwards and backwards. If the flames are still striking against the back wall please close the burner and contact your dealer

Ruby Fires Riano diagram (page 2)
Fig. 2
Ruby Fires Riano diagram (page 2)
Fig. 3
Page 3 of the Ruby Fires Riano user manual
Page 3 · cliquer pour agrandir
Page 3

Use: Bio-ethanol fireplaces are easy to use. Before lighting ensure that the burner is filled to the MAX indication which is attached on the inside of the burner, with the original Ruby Fires bio-ethanol. Using a different brand or type of bio-ethanol fuel can lead to a different fire be- havior, such as increased consumption, higher temperatures and higher flames. Use approved grades of bioethanol fuel only. This fire burns appr. 3 hours on 1 liter of bioethanol. Place the burner in the insert of the fireplace with the glass facing outwards.

Light the fuel with a long match or preferably with a long lighter, with a minimum length 140mm. Note: Bio-ethanol which is at room temperature will light easier than cold fuel. Afer ignition, it may take some time before you see yellow flames, this can take up to 10 minutes. Filling the ceramic burner with Ruby Fires bio-ethanol

  • It is of great importance that the liquid never flows outside the filling opening.
  • Make sure to fill the ceramic burner carefully and slowly, so it cannot be overfilled.
  • In case liquid is spilled, use a soft, absorbing cloth to clean.
  • For an optimal fire the burner has to be filled not higher than MAX.

When the ceramic burner is filled for the first time, the ceramic element on the inside will be saturated completely. The liquid will always remain partly absorbed by the brick.

  • How to fill the ceramic burner:
  • Open the latch completely to the back, so the filling-opening is visible.
  • Place the enclosed funnel in the filling-opening.
  • Carefully pour the Ruby Fires bio-ethanol in the funnel until the ceramic brick is saturated, but make sure that the liquid level remains underneath the surface of the element: untill MAX!
Ruby Fires Riano diagram (page 3)
Fig. 4
Ruby Fires Riano diagram (page 3)
Fig. 5
  • Warning: Make sure that the liquid does not flow outside the filling-opening. In case liquid has been spilled outside the filling opening, make sure this is dried up before lighting the fire. Risk of fire
Page 4 of the Ruby Fires Riano user manual
Page 4 · cliquer pour agrandir
Page 4
  • When the ceramic burner is filled, remove the funnel. You can now pull the latch completely forwards. The burner opening is visible and the ceramic burner is ready for use.
Ruby Fires Riano diagram (page 4)
Fig. 6
Ruby Fires Riano diagram (page 4)
Fig. 7
  • How to re-fill the ceramic burner:
  • Close the latch when the ceramic burner is burnt empty.
  • Check carefully that there is no longer any fire on the surface.
  • Warning: Never fill a burning burner – Life threatening!
  • Wait at least 45 minutes for the burner to cool down.
  • For further instructions see: ‘How to fill the ceramic burner”
  • Lighting the ceramic burner:
  • There is a latch for the fire opening on the topside of the ceramic burner.
  • When the ceramic burner is not lit, this latch is closed (to prevent the bio ethanol from evaporating).
  • By opening the latch the fire opening with the ceramic brick becomes visible.
  • The ceramic burner can be lit using a long lighter or a long matchstick, but only when nothing is placed on the opening and theRuby Fires bio-ethanol is well filled as described in: ‘How to fill the ceramic burner’
Page 5 of the Ruby Fires Riano user manual
Page 5 · cliquer pour agrandir
Page 5
  • Maintenance
  • When the ceramic burner has been used very often, discolorations on the top can occur. This is normal and does not harm to the quality of the product.
  • Do not use an abrasive product for cleaning the insert. Clean the surfaces with a moist piece of cloth or a non-abrasive stainless steel cleanser.
  • Glass screens can be cleaned with a ceramic cook top cleaner.

Problem Possible cause Solution

Existence of soot Wrong fuel (e.g. gel) Use ONLY Ruby Fires bio- ethanol 98%

Duration of fire too short Wrong fuel (e.g. gel) Use ONLY Ruby Fires bio- ethanol

Duration of fire too short Burner has not been filled completely

Extinguish the burner. Let it cool down for at least 45 minutes and then re-fill.

Flames too high Wrong fuel (e.g. gel) Use ONLY Ruby Fires bio- ethanol

Flames too low, not visible Burner has not been filled completely

Extinguish the burner. Let it cool down for at least 45 minutes and then re-fill.

Flames are blue, not visible Fuel is almost finished Extinguish the burner. Let it cool down for at least 45 minutes and then re-fill.

Flames remain after the latch has been closed

Open the latch and quickly close it again to refrain the oxygen supply

Page 6 of the Ruby Fires Riano user manual
Page 6 · cliquer pour agrandir
Page 6
  • Safety:
  • Use only the supplied mounting strip to install the fireplace
  • Make sure the fireplace is always steady and placed horizontally
  • Install the fireplace only against a vertical, solid, stable and non-combustible rear wall
  • Never cover the openings on the bottom of the fire.
  • Never remove the insulating panel from the rear of the insert.
  • When re-filling the ethanol fire, make sure the fire is extiguished and cooled down. Wait at least 45 minutes.
  • Use the supplied funnel when refilling the burner
  • If fuel spills during filling, remove it with a cloth before relighting the fire.
  • Preferably use the original Ruby Fires bio-ethanol only
  • Do not use other fuels such as alcohol, gasoline or ethanol from a pump
  • Never pour bio-ethanol onto a burning fire
  • Fill the fuel tank to the top of the dipstick. When the bio-ethanol is lit for the First time, it might bubble a bit.
  • Light the fire with a long match or gas lighter only, minimum length 140mm
  • Burn the fire no longer than 8 hours in a row, then let it cool completely
  • Keep 100cm around the fireplace free of combustible materials
  • When lit, the back wall of the fireplace and the burner are (very) hot, do not touch these.
  • Do not place any (ceramic) logs, pebbles or other decorative material in the flames / or on top of the burner
  • Be careful with flammable clothing near open flames
  • Do not store or use flammable materials, liquids or gas, near the fire when it is in use
  • Any future changes or modifications to the fire should only be made by qualified person
  • Do not leave clothes, towels or other objects on the fireplace to dry
  • Never cover the appliance when in use.
  • The flames cannot be adjusted by using the latch. This should always be completely opened when in use.
  • Before you use the fireplace, gently remove all the protective film.
  • Never change the construction of the ceramic burner.
  • The flames should never directly touch the inside of the metal insert.
  • Avoid physical contact with the bio ethanol.
  • The use of fire by children is prohibited. Keep children supervised at all times when the fireplace is in use
  • Use by adults under the influence of alcohol, drugs or not in good mental and/ or physical ability is not recommended
  • After extinguishing, never touch the fire with bare hands. The burner will be hot and could cause burns.
  • In case of improper use or failure to follow these safety instructions, the liability and warranty will no longer be applicable
  • This manual is part of the device and the must be kept with the fire. In the case of sales to a third party the manual must be included
Page 7 of the Ruby Fires Riano user manual
Page 7 · cliquer pour agrandir
Page 7
ProductModel: Serra-Corato Weight: about 12,5 Kg (with full fuel tank)
ModelRiano Weight: about 12,5 Kg (with full fuel tank)
Burner capacityappr. 0.7 liter Producer: Ruby Décor BV – Broek op Langedijk – The Netherlands

We hope you enjoy your bio-ethanol fireplace.

Helpdesk Ruby FiresT:+31 (0)226-331420 E: info@ rubyfires.com

This manual is part of the device and must be kept with the fire. In the case of sales to a third party the manual must be included.

In case of improper use or failure to follow the safety instructions, neither liability nor warranty will apply.

Version July 2013

Page 8 of the Ruby Fires Riano user manual — Riano
Page 8 · cliquer pour agrandir
Page 8

DE Bio Fireplace Bedienungsanleitung

Ruby Fires Riano — DE Bio Fireplace Bedienungsanleitung diagram (page 8)
Fig. 8 · DE Bio Fireplace Bedienungsanleitung

Serra

Kamine

Ruby Fires Riano — Serra diagram (page 8)
Fig. 9 · Serra

Corato

Kamine

Ruby Fires Riano — Corato diagram (page 8)
Fig. 10 · Corato

Riano

Einsatz

Sources

Références et liens

Pages mentionnées dans ce manuel — fabricant, assistance et téléchargements.

Dépannage

Dépannage

Problèmes fréquents, causes probables et solutions.

ProblèmeCause possibleSolution
Existence of sootWrong fuel (e.g. gel)Use ONLY Ruby Fires bio- ethanol 98% p.5
Duration of fire too shortWrong fuel (e.g. gel)Use ONLY Ruby Fires bio- ethanol p.5
Duration of fire too shortBurner has not been filled completelyExtinguish the burner. Let it cool down for at least 45 minutes and then re-fill. p.5
Flames too highWrong fuel (e.g. gel)Use ONLY Ruby Fires bio- ethanol p.5
Flames too low, not visibleBurner has not been filled completelyExtinguish the burner. Let it cool down for at least 45 minutes and then re-fill. p.5
Flames are blue, not visibleFuel is almost finishedExtinguish the burner. Let it cool down for at least 45 minutes and then re-fill. p.5
Flames remain after the latch has been closedOpen the latch and quickly close it again to refrain the oxygen supply p.5

Poser une question sur : Ruby Fires Riano

Les utilisateurs et notre équipe répondent généralement sous 24 h — et votre question servira aussi aux suivants.

Add your email to get notified when it’s answered — no spam, ever.

0 questions
Aucune question pour l'instant sur le Ruby Fires Riano

Soyez le premier à poser une question — d'autres utilisateurs ou notre équipe y répondront.

Document d'origine

Ruby Fires Riano manuel PDF

32 pages·2.6 MB·Cheminée·PDF
Cliquez sur une page ci-dessus pour l'ouvrir ici
Page 1 / …
100%
Chargement des pages…