Manuel d'utilisation / d'entretien du produit 5901 du fabricant Viper
Aller à la page of 60
Responder LC Model 5901 Security and Remote Start Owner’ s Guide © 2008 Directed Electronics, Vista, CA G5702V 2008-08.
.
Contents Government regulations .....................................................................................5 W arning! Safety first .........................................................................................7 What is included .
2-way remote .........................................................................................46 Programming options .......................................................................................47 Security & convenience expansions .
5 © 2008 Directed Electronics. All rights reserved. Government regulations This device complies with Par t 15 of FCC rules. Operation is subject to the fol- lowing two conditions: (1) This device may.
6 © 2008 Directed Electronics. All rights reserved. Control Center T o satisfy FCC RF exposure compliance requirements, the device and its antenna must maintain a separation distance of 20 cm or more from the person’ s body , except for the hand and wrists, to satisfy RF exposure compliance.
7 © 2008 Directed Electronics. All rights reserved. W arning! Safety first The following safety warnings must be obser ved at all times: Due to the complexity of this system, installation of this product must only be performed by an authorized Directed dealer .
8 © 2008 Directed Electronics. All rights reserved. W ARNING! It is the responsibility of the owner to ensure the parking/emergen - cy brake properly functions.
9 © 2008 Directed Electronics. All rights reserved. This product is designed for fuel injected vehicles only . Use of this product in a standard transmission vehicle must be in strict accordance with this guide. This product should not be installed in any conver tible vehicles, soft or hard top with a manual transmission.
10 © 2008 Directed Electronics. All rights reserved. What is included 1 five-button, 2-way Supercode Responder LC remote control • (p/n 7752V) 1 five-button, 1-way Supercode remote control • (p.
11 © 2008 Directed Electronics. All rights reserved. ed if your warranty registration is not returned. Make sure you receive the warranty registration from your dealer . It is also necessar y to keep your proof of purchase, which reflects that the product was installed by an authorized dealer .
12 © 2008 Directed Electronics. All rights reserved. ➢ Charging the Battery Plug in the USB charger (alternately a standard mini USB cable • connected to any standard USB port on any laptop or desktop computer can also be used (cable not included).
13 © 2008 Directed Electronics. All rights reserved. ➢ Battery Replacement Slide the door up to expose the batter y beneath the holder . Remove the expired batter y . Place the new batter y into the remote control. When power is returned the remote control is ready for use.
14 © 2008 Directed Electronics. All rights reserved. Responder LC 2-W ay 5319 ,&$ )&&,&apo.
15 © 2008 Directed Electronics. All rights reserved. LC 1-way companion 10 5313 ,&$ )&&,&apos.
16 © 2008 Directed Electronics. All rights reserved. access “Request temperature” or “Runtime remaining” press the A U X but- ton the specified amount of times, and then hold. Note: Pressing more than one button simultaneously generates an Error tone.
17 © 2008 Directed Electronics. All rights reserved. Using the system Please note the screen shot to the right of a feature indicates what the display looks like when this feature is activated. A U X Arm Command : Press one time to Arm Feedback : Lock Icon will appear , and one beep from remote Notes : Press/hold for 1.
18 © 2008 Directed Electronics. All rights reserved. A U X Disarm Command : Press one time to Disarm Feedback : Unlock icon appears and remote beeps twice The siren in the vehicle will “chirp” twice, and the parking lights will flash. The 2-way remote will “chirp” twice and the A U X unlock icon appears to confirm disarming.
19 © 2008 Directed Electronics. All rights reserved. minutes and 1 minute of runtime remaining, it sends the 2-way remote control a paging signal. Points to remember : If the hood is open or if the brake pedal is pressed, the vehicle will not remote start.
20 © 2008 Directed Electronics. All rights reserved. A U X Aux Command : Press and hold for 1.5 seconds to activate the T runk Release. Feedback : The trunk icon appears and the re- mote plays a short tone. Notes : This is an optional feature. See your sales rep/installer for details .
21 © 2008 Directed Electronics. All rights reserved. T o enter or exit valet mode with the valet/program switch: T urn the ignition key on and then of f. 2. Radious will be if not specied. 1. T ex ture is same as 3. Body color : INJECT TO LERANCE SPEC.
22 © 2008 Directed Electronics. All rights reserved. Cabin temperature Command : Press and release A U X one time, then Hold for 1.5 seconds. Feedback : Screen will display current in cabin temperature. Notes : Cabin temperature is displayed on the remote.
23 © 2008 Directed Electronics. All rights reserved. Additional arming features ➢ Arm Features: Silent arm Command : Press A U X one- time and then press A U X Feedback : Screen changes to the lock icon Notes : Arms the system without chirps The system arms without the confirmation chirp.
24 © 2008 Directed Electronics. All rights reserved. W arn-Away response is triggered by: Lesser or lighter vibrations or impacts (detected by the Stinger • Doubleguard shock sensor) An optional Pr.
25 © 2008 Directed Electronics. All rights reserved. sponse will reset. ➢ System override T o disarm the system without a remote control: Y ou will need to use your Override Switch located on your systems control center (see diagram below) to disarm the system.
26 © 2008 Directed Electronics. All rights reserved. ➢ Modified Arming Modes The Responder LC gives you an unprecedented level of control over how it will protect your car . “Normal arming” means that all the Re - sponder LC security features are active automatically .
27 © 2008 Directed Electronics. All rights reserved. will beep once. Silent Mode 2 - T urning of f the siren Y ou can tur n off the vehicle siren and flashing lights on a one-time basis, leaving the system’ s paging feature as the only alarm response.
28 © 2008 Directed Electronics. All rights reserved. Additional remote start features Manual T ransmission If the vehicle has a manual transmission the proper steps must be fol- lowed before leaving the parked vehicle or the remote star t feature is disabled.
29 © 2008 Directed Electronics. All rights reserved. running. If the vehicle shuts down when locking, then the unit did not enter valet take-over mode. Timer mode Command : Press A U X two-times and then A U X . Feedback : Small timer icon appears and text reads “timer start on”.
30 © 2008 Directed Electronics. All rights reserved. T ur n the ignition on. Timer Mode is exited and the parking lights ash 2. slowly four times. Note: The Bitwriter can change the amount of times the remote start activates and, it can change the inter vals between activations in timer mode.
31 © 2008 Directed Electronics. All rights reserved. still enabled). Y ou can still remote star t the vehicle after the turbo timer has timed out and shut off the vehicle.
32 © 2008 Directed Electronics. All rights reserved. remote will respond with error tone. Rear defogger Command : Press A U X four times, and then A U X . (Only after remote start is on.) Feedback : Defogger icon appears on remote and text reads Defrost On.
33 © 2008 Directed Electronics. All rights reserved. will shut down when locking). Press the 3. A U X button on the remote 3 times and then press the A U X button. The 2 way remote will beep once and flash the 4. A U X LED once. The parking lights on the vehicle will flash 5 times fast confirming 5.
34 © 2008 Directed Electronics. All rights reserved. Auxiliar y features Aux 1 Command : Press A U X one time and then press A U X . Feedback : The screen will show a text of the item activated * Notes : This is an optional feature. See your sales rep/installer for details.
35 © 2008 Directed Electronics. All rights reserved. Remote control feature programming The Responder LC 2-way remote control has menus for configuring the remote control user features and for programming the remote to the system control module. Before you start make sure the keypad is unlocked.
36 © 2008 Directed Electronics. All rights reserved. display area of the screen, press and hold the A U X button until the remote beeps to confirm entr y into the selected feature menu. T o access feature menu options, scroll up pressing the A U X button, or scroll down by pressing the A U X button.
37 © 2008 Directed Electronics. All rights reserved. Feature Opt 1 Opt 2 Opt 3 Opt 4 Opt 5 Button press beep On Off back System type Remote star t & Security Remote star t Back Clock set Clock time Back ➢ Menu option descriptions Auto keypad lock • Automatically locks the remote buttons when the buttons are not used for 60 seconds.
38 © 2008 Directed Electronics. All rights reserved. Remote start display: Clock, temperature or runtime • Allows you to choose what is displayed in the text during the remote start sequence. Clock displays the current time during remote start. T emperature displays the current cabin temperature during the remote star t.
39 © 2008 Directed Electronics. All rights reserved. down the menu. After you select the time increment (hour /min ), press A U X . The hour or minute flashes. Press the A U X button to move up to the hour or minute, and press the A U X button to move down to the hour or minute you want to set.
40 © 2008 Directed Electronics. All rights reserved. Safety features This system has several important safety features to ensure proper op- eration of the motor and prevent accidental damage to the engine or its components.
41 © 2008 Directed Electronics. All rights reserved. Diagnostics The microprocessor at the hear t of your system is constantly monitoring all of the switches and sensors connected to it. It is designed to detect any faulty switches and sensors and prevent them from disabling the entire system.
42 © 2008 Directed Electronics. All rights reserved. Note: Bypass Notification does not occur when the system is in Silent Mode or if the notification chirps have been programmed of f by the installer . ➢ Disarming Extra chirps heard when disarming the system are the T amper Alert.
43 © 2008 Directed Electronics. All rights reserved. Disarm 3 disarmed with Low batter y indicator Disarm 4 System disar med with T amper Aler t Disarm 5 System disar med with NPC active. ➢ T able of zones A zone is represented by the number of LED flashes used by the system to identify a particular type of input.
44 © 2008 Directed Electronics. All rights reserved. For example: If zone 3 was active or triggered, the LED will blink three times with a two-second pause. Then it will blink three times again, and repeat until the ignition is turned on. ➢ Nuisance prevention® circuitry Y our system has Directed’ s Nuisance Prevention® Circuitr y (NPC).
45 © 2008 Directed Electronics. All rights reserved. • 7 ashes: manual transmission mode is enabled and not initialized • 8 ashes: neutral safety wire has no ground or the remote star t defeat toggle switch is off. Keep a record of the number of flashes, to assist your installer when taking the vehicle in for ser vice.
46 © 2008 Directed Electronics. All rights reserved. Power saver mode ➢ System Y our system will automatically enter Power Saver Mode while armed or in V alet Mode, after a period of time in which no operation has been perfor med. This lowers the current draw on the vehicle’ s batter y .
47 © 2008 Directed Electronics. All rights reserved. Programming options Y our system has many custom programmable options. Some may re- quire installation labor . Ask your authorized dealer for details. The following is a list of the programmable options, with the factor y settings in Bold.
48 © 2008 Directed Electronics. All rights reserved. how long a security system can sound before it is considered a nuisance. If your installer is programming the security system with the Directed Bitwriter®, the full triggered response can be programmed for any duration ranging from 1 to 180 seconds.
49 © 2008 Directed Electronics. All rights reserved. Security & convenience expansions Listed below are some of the many expansion options available.
50 © 2008 Directed Electronics. All rights reserved. Power Window Control: Automatic power window control is provided with the 529T and 530T systems. These can operate power windows, and can roll them up automatically when the system is armed, roll them down, or both up and down.
51 © 2008 Directed Electronics. All rights reserved. Glossar y of terms 2-W ay Remote: A hand-held, remote control which operates the various functions of your system and receives feedback and pages from the alarm system.
52 © 2008 Directed Electronics. All rights reserved. to the vehicle or glass. T rigger or T riggered Sequence: This is what happens when the alarm “goes of f ” or “trips.” The triggered sequence of your system consists of the siren sounding and parking lights flashing for the programmed duration.
53 © 2008 Directed Electronics. All rights reserved. LCD layout ALL ALL ALL ALL ALL ALL ALL A L L A L L ALL ALL 1 ALL Armed 9 ALL Thermometer/Smart star t 2 ALL Locked.
54 © 2008 Directed Electronics. All rights reserved. 17 ALL Vibration On 27 ALL Car Door 18 ALL Pager T one On 28 ALL Home (Garage - Open) * 19 ALL Siren 29 ALL Home (Garage C.
55 © 2008 Directed Electronics. All rights reserved. Cut along the dotted line and fold to keep in purse or wallet for a quick and easy reference. ✂ ✂ Quick reference guide Arming T o arm, press A U X . The system arms with 1 beep and siren tone.
56 © 2008 Directed Electronics. All rights reserved. Cut along the dotted line and fold to keep in purse or wallet for a quick and easy reference. ✂ ✂ Location of Shutdown T oggle Switch___________________ Rear Defogger Press A U X four times, and then press A U X (only after remote start is ON.
57 © 2008 Directed Electronics. All rights reserved. Limited lifetime consumer warranty Directed Electronics. (“Directed”) promises to the original purchaser to repair or replace (at Directed’ .
58 © 2008 Directed Electronics. All rights reserved. WITHOUT LIMIT A TION, LIABILITY FOR THEFT , DAMAGE AND/OR V ANDALISM. THIS W ARRANTY DOES NOT COVER LABOR COSTS FOR MAINTENANCE, REMOV AL OR REINST ALLA TION OF THE UNIT OR ANY CONSEQUENTIAL DAMAGES OF ANY KIND.
.
G5702V 2008-08 Vista, CA 92081 www .directed.com © 2008 Directed Electronics—All rights reser ved The company behind this system is Directed Electronics Since its inception, Directed Electronics has had one purpose, to provide consumers with the finest vehicle security and car stereo products and accessories available.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Viper 5901 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Viper 5901 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Viper 5901, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Viper 5901 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Viper 5901, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Viper 5901.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Viper 5901. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Viper 5901 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
