Manuel d'utilisation / d'entretien du produit SL-9000-ESB SERIES du fabricant Toshiba
Aller à la page of 94
TEC Electronic Computing Scale SL-9000-ESB SERIES Owner ’ s Manual.
.
(i) Safety Summary Safety Summary Personal safety in handling or maintaining the equipment is extremely important. Warnings and Cautions necessary for safe handling are included in this manual. All warnings and cautions contained in this manual should be read and understood before handling or maintaining the equipment.
(ii) Safety Summary CAUTION This indicates that there is the risk of personal Injury or damage to objects if the machines are improperly handled contrary to this indication.
.
.
Page T ABLE OF CONTENTS 1. INTRODUCTION ............................................................................................. 1-1 1.1 APPLICABLE MODEL ........................................................................... 1-2 1.2 ACCESSORIES .
CAUTION: 1. This manual may not be copied in whole or in part without prior written permission of TOSHIBA TEC. 2. The contents of this manual may be changed without notification. 3. Please refer to your local Authorized Service representative with regard to any queries you may have in this manual.
1-1 1. INTRODUCTION 1. INTRODUCTION This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
1-2 1. INTRODUCTION 1. INTRODUCTION 1.1 APPLICABLE MODEL 1.1 APPLICABLE MODEL • SL-9000-30M-ESB-US • SL-9000-15M-ESB-CA • SL-9000-15M-ESB-QR The description of the model number is as follows. S L - 9 0 0 0 - 3 0 M - E S B - U S Destination Code ex.
2-1 2. SPECIFICATION 2. SPECIFICA TION 2.1 SCALE 2.1 SCALE Item US CA Maximum Capacity 30 lb 15 Kg (30 lb) 15 Kg Minimum Scale Division 0.005 lb (0~15 lb) 0.002 Kg (0 ~ 6 Kg) 0.002 Kg (0~6 Kg) 0.005 Kg (6 ~ 15 Kg) 0.005 Kg (6~15 kg) 0.01 lb (15~30 lb) 0.
3-1 3. APPEARANCE 3. APPEARANCE 3. APPEARANCE Remote Display Main Power Switch Drawer I/F CMT/PL-3 I/F Power Cord Speed Keyboard and Programming Keyboard Operation Keyboard Print Head Liquid Crystal D.
4-1 4. DISPLAY 4. DISPLA Y 4.1 US TYPE • US (UNITED STATES) 4.1 US TYPE SL-9000 WEIGHT lb %/T NET REG. M/D R/W PREPACK X Z ERROR PRICE/lb $ TOTAL PRICE $ WEIGHT 0 ~ 15 lb 15 ~ 30 lb e=d 0.
4-2 4. DISPLAY 4.3 QR TYPE A B SL-9000 WEIGHT 0 ~ 6 Kg 6 ~ 15 Kg e=d 0.002 Kg 0.005 Kg Max. 15 Kg Min 0.04 Kg TARE T=-1 Kg For the QR machine, the following multi-linqual display stickers are provided to adapt machines to use in various countries. Select one of them and affix it to positions A and B on the remote dis- play.
5-1 5. KEY LAYOUT 5. KEY LA YOUT 5.1 PROGRAMMING KEYBOARD 5.1 PROGRAMMING KEYBOARD AUTO CODE FEED @ 0 > P . > - RETURN 1/4 DELETE (B) NEXT PLU ? 9 = O ~ L , DELETE PLU INSERT 1 SET NEXT ZERO ` 8.
5-2 5. KEY LAYOUT Function 1. Displays the preceding PLU data. 2. Used to set an auto code. 3. Calls the preceding label format # when setting the print position. 4. Selects a prgramming item. Moves the cursor to the left. Moves the cursor to the right.
5-3 5. KEY LAYOUT 5.2 OPERA TION KEYBOARD AND SPEED KEY BOARD 5.2 OPERATION KEYBOARD AND SPEED KEYBOARD NOTES: 1. The numbers 1~70 indicate the speed key layout, but the actual keys have no number. Pressing the key enables another 70 PLUs assignment. 2.
5-4 5. KEY LAYOUT Function Prints the customer label. Saves tare and unit price after taking off the commodity from a platter. Sets the quantity of commodity in "BY COUNT" mode. Displays the date. 1. Selects the item for change Print/OFF. 2.
5-5 5. KEY LAYOUT Function Displays a total amount. This key is used for item or subtotal discount by entering a percentage. (Optional key by initial setting) Feeds the label. Issues a test label. Adjusts the zero point. Changes the label issue mode between Automatic issue and manual issue.
6-1 6. PROCEDURE BEFORE OPERATION 6. PROCEDURE BEFORE OPERATION 6. PROCEDURE BEFORE OPERA TION 1. Unpack the accessories and scale from the carton. 2. Install the remote display on the scale. (See Page 7-1.) 3. Refer to safety Precautions in this manual and set up the scale in a proper location.
7-1 7. INSTALLATION PROCEDURE 7. INSTALLATION PROCEDURE 7. INST ALLA TION PROCEDURE Remote Display Connector Cover 1. To install the remote display, insert the two screws on the bottom of the remote pipe into the holes provided on the scale base. 2. Connect the connectors, pull down the connector cover, and install the remote blind plate.
7-2 7. INSTALLATION PROCEDURE 7. INSTALLATION PROCEDURE Remote Display Affix here. Remote Display Sheet 4. For the CA type, affix the remote display sheets to the remote display. Be sure to wipe the remote display surface clean before affixing the sheet or sticker.
8-1 8. LEVEL ADJUSTMENT 8. LEVEL ADJUSTMENT 8. LEVEL ADJUSTMENT 1. Level Gauge Set the scale on a stable and level surface. Level the scale by turning the adjustable legs so that the air bubble is inside the center circle. 2 When the air bubble moves toward rear, turn the front adjustable legs clockwise.
9-1 9. REMOVAL AND REPLACEMENT OF MEDIA 9. REMOVAL AND REPLACEMENT OF MEDIA 9. REMOV AL AND REPLACEMENT OF MEDIA 1. Open the right cover. Then push the head-up lever in the direction indicated by the arrow. A Head-up Lever 2. Pull out the label cassette.
9-2 9. REMOVAL AND REPLACEMENT OF MEDIA 9. REMOVAL AND REPLACEMENT OF MEDIA 4. Loosen the P-2.6x6 screw and move the label guide plate according to the media width. 5. Secure the label guide plate with the P-2.6x6 screw. NOTE: After replacing the media, press the feed key to confirm that the media is issued correctly.
10-1 10. OUTLINE OF OPERATION NOTES: 1. You can register a password to prohibit unauthorized access to each menu expect for REG. menu. 2. To avoid wasteful use of the display, press the POWER key to turn the display off while being unused. Pressing the POWER key again allows you to enter REG.
11-1 11. PROGRAMMING PROCEDURES 1 1. PROGRAMMING PROCEDURES (1) Normal Mode ■ How to access the Programming Menu (1) Normal Mode Increment Item # selection Select an item No. (See next page.) Select the programming menu group. or Decrement ENTER 0 0 9 ~ Enter the Password neccesary unnecessary Enter a menu number Password ESC.
11-2 11. PROGRAMMING PROCEDURES (2) ESB Limited Specification ■ How to access the Programming Menu (2) ESB Limited Specification Increment Select an item No. (See next page.) or Decrement PROG. 0 0 9 to Enter the Password neccesary unnecessary Enter a menu number Password ESC.
11-3 11. PROGRAMMING PROCEDURES Table 1: Title and Contents of Programming Menu ■ Table 1: Title and Contents of Programming Menu NO. TITLE MENU CONTENTS Page GROUP 1 PLU DATA EDIT 1 0 0 CHANGE UNIT.
11-4 11. PROGRAMMING PROCEDURES How to enter characters ■ How to enter characters Use the following procedure to enter a commodity name, address and ingredient message. Example) 1st line: TEC STORE 2nd line: (TEL) 0123-45-6789 SHIFT T T E E 6789 EC SPACE 1st line content 2nd line content ST OR RETURN 1/4 SHIFT ( DELETE (A) 1/2 L E NOTES: 1.
11-5 11. PROGRAMMING PROCEDURES 11.1 UNIT PRICE CHANGE 1 1.1 UNIT PRICE CHANGE Normal Mode ESB Limited Spec. Mode Menu Group: 1 Item No.: 0 Item No.: 0 Unit prices stored in PLU can be changed under this menu. In this procedure, use the operation keys (except when calling a PLU by using a speed key).
11-6 11. PROGRAMMING PROCEDURES 11.2 PLU DATA SETTING 1 1.2 PLU DA T A SETTING Normal Mode ESB Limited Spec. Mode Menu Group: 1 Item No.: 1 Item No.: 1 Setting or changing the contents of PLU (PLU#, UPC#, Commodity Name, etc.). 0 1 BY COUNT WEIGH or FIX 1 1 0 0 or The setting label is issued.
11-7 11. PROGRAMMING PROCEDURES 11.2 PLU DATA SETTING Pressing the ↓ key instead of the ENTER key proceeds to the next menu. Pressing the ↑ key returns to the preceding menu. Verification label of PLU data NET WT. SELL BY PACKED ON PRICE lb T1.000 T15.
11-8 11. PROGRAMMING PROCEDURES 11.2 PLU DATA SETTING 9. In ESB limited specification mode Open PLU (1) "OPEN PLU" (PLU#.999999) is created automatically when RAM clear is performed. (2) "OPEN PLU" (PLU#.999999) is called automatically with U.
11-9 11. PROGRAMMING PROCEDURES 11.3 INGREDIENT MESSAGE 1 1.3 INGREDIENT MESSAGE Normal Mode ESB Limited Spec. Mode Menu Group: 1 Item No.: 11 Item No.: 2 Ingredient messages can be printed on a label with a maximum of 54 characters per line in small letters or 32 characters per line in boldfaced small letters, by up to 38 lines.
11-10 11. PROGRAMMING PROCEDURES 11.4 NUTRITION FACTS 1 1.4 NUTRITION F ACTS In ESB Limited specification mode, this programming is unavailable. Menu Group: 1 Item No.: 3 Using the following procedure, nutrition information and caloric intake can be set.
11-11 11. PROGRAMMING PROCEDURES Pressing the ↓ key instead of the ENTER key proceeds to the next menu. Pressing the ↑ returns to the preceding menu. 11.4 INUTRITION FACTS NOTES: 1. When a selected PLU# is not stored in the PLU file, an error occurs.
11-12 11. PROGRAMMING PROCEDURES 11.4 INUTRITION FACTS • Set the Daily Value Table e AUTO CODE ENTER ENTER ENTER ENTER ENTER ENTER ENTER Enter the Basic Calories. (Content No. 1) Enter the Basic Saturated Fat. (Content No. 3) Enter the Basic Sodium.
11-13 11. PROGRAMMING PROCEDURES Nutrition Facts Serving Size xxxCUP (xxxxg) Servings Per Container xxx Amount Per Serving Calorier xxxx Calories from Fat xxxx xxxxxxxxxxxxxxxxxxxxxx xxxx % Daily Valu.
11-14 11. PROGRAMMING PROCEDURES 11.5 PLU VERIFYING LABEL 1 1.5 PLU VERIFYING LABEL Normal Mode ESB Limited Spec. Mode Menu Group: 1 Item No.: 12 Item No.: 4 PLU data stored in the scale are verified in the following procedure. NOTES: 1. Labels are printed in both batch mode and on-demand mode.
11-15 11. PROGRAMMING PROCEDURES 11.6 ADDRESS SETTING 1 1.6 ADDRESS SETTING Normal Mode ESB Limited Spec. Mode Menu Group: 1 Item No.: 2 Item No.: 5 Store addresses and receipt header printed on label can be set within the following character limits.
11-16 11. PROGRAMMING PROCEDURES 11.7 SPECIAL INFORMATION 1 1.7 SPECIAL INFORMA TION In ESB Limited Spec. mode, this programming is unavailable. Menu Group: 1 Item No.
11-17 11. PROGRAMMING PROCEDURES 11.9 SPEED KEY SETTING 1 1.9 SPEED KEY SETTING Normal Mode ESB Limited Spec. Mode Menu Group: 1 Item No.: 8 Item No.: 9 The SL-9000 has a maximum of 70x2 speed keys which are very convenient to call PLUs quickly. (Refer to page 5-3 regarding the Key Layout.
11-18 11. PROGRAMMING PROCEDURES 11.10 PRINT FORMAT 1 1.10 PRINT FORMA T Normal Mode ESB Limited Spec. Mode Menu Group: 2 Item No.: 3 Item No.: 0 The SL-9000 can memorize 5 different print formats. After print formats are set, you can call them by entering the print format number.
11-19 11. PROGRAMMING PROCEDURES 11.10 PRINT FORMAT Table 2: Label Format Number Table Select the format # for the label to be used by referring to the table below. 1) The width of label is selected by INITIAL SETTING. 2) The number of commodity lines depends on label width.
11-20 11. PROGRAMMING PROCEDURES Label format In ESB limited specification mode, it is possible to print it is possible to print following labels. (New label format is not added.) 11.10 PRINT FORMAT Non-POS X O POS O O Ing. 6line O O V. Length O O 57 mm width label 48 mm width label Format No.
11-21 11. PROGRAMMING PROCEDURES 11.11 DATE/TIME SETTING 1 1.1 1 DA TE/TIME SETTING Normal Mode ESB Limited Spec. Mode Menu Group: 2 Item No.: 4 Item No.: 1 Date, time, machine number, and store code are set in this procedure. NOTES: 1. Express the time in a 24-hour military format.
11-22 11. PROGRAMMING PROCEDURES 11.12 CMT/PL-3 ENTER 2 PROG. ESC. <MENU> Group 2 Main <MENU> SAVE LOAD or NEXT PLU or <MENU> Group 2 Set the transmission item.
11-23 11. PROGRAMMING PROCEDURES NOTE: When transferring data with the PL-3, required FDK varies depending on the amount of ING. Be careful of the following when changing a FDK. a: During write operation, replace the FDK with a formatted one. b: Verify and read data in the same order as write.
11-24 11. PROGRAMMING PROCEDURES 1 1.13 ON-LINE/LOCAL Menu Group: 2 Item No.: 3 When the SL-9000 is used as a satellite in an on-line system, the “ID #” and “Transmission delay time” can be set by the following procedure. NOTES: 1. The TMCC baud rate is fixed to 9600 BPS.
11-25 11. PROGRAMMING PROCEDURES 11.14 BAR CODE FORMAT 1 1.14 BAR CODE FORMA T Normal Mode ESB Limited Spec. Mode Menu Group: 2 Item No.: 7 Item No.: 6 With the SL-9000 scale, four kinds of bar code formats are available. These formats can be changed freely.
11-26 11. PROGRAMMING PROCEDURES 11.14 BAR CODE FORMAT PLU # 123456 Display HHHHHH 123456 FLAG 0 ~ 9 PLU # 1 ~ 6 UPC# 1 ~ 6 PC/D 1 PRICE 1 ~ 7 WEIGHT 1 ~ 6 C/D 1 UPC # 123456 Display CCCCCC 123456 8. Setting Items PLU # $ 1 2 . 3 4 Display P P P P 12 34 $ 1 2 3 .
11-27 11. PROGRAMMING PROCEDURES 11.15 TITLES 1 1.15 TITLES In ESB Limited Spec. Mode, this programming is unavailable. Menu Group: 2 Item No.: 7 You can register and change displayed/printed titles of the additional information area for nutrition facts using the following procedure.
11-28 11. PROGRAMMING PROCEDURES 11.16 TRANSFERRING LOGO DATA 1 1.16 TRANSFERRING LOGO DA T A In ESB Limited Spec. Mode, this programming is unavailable. Menu Group: 2 Item No.: 8 Logo data is created on a PC and stored into RAM through the CMT interface.
11-29 11. PROGRAMMING PROCEDURES 11.17 IDIOM SETTING 1 1.17 IDIOM SETTING In ESB Limited Spec. Mode, this programming is unavailable. Menu Group: 2 Item No.: 9 Up to 50 terms frequently appearing in ingredient messages can be preset using the following procedure.
11-30 11. PROGRAMMING PROCEDURES 1 1.19 FREE FORMA T In ESB Limited Spec. Mode, this programming is unavailable. Menu Group: 3 Item No.: 1 When using 57-mm wide labels, up to three print formats can be changed freely. Moreover, characters can be rotated and magnified, and print items are salectable.
11-31 11. PROGRAMMING PROCEDURES 11.19 FREE FORMAT NOTES: 1. The following print items cannot be magnified. 1 LOGOs 2 Safe handing precautions 3 Ingredient messages 4 Bar code 2. The following items cannot be rotated. 1 LOGO 2 Safe handling precautions 3 Bar code 3.
11-32 11. PROGRAMMING PROCEDURES 11.19 FREE FORMAT Address Address Commodity (0,0) (383,0) Label Length 384 dot 57 mm Y X *1 *2 *1 *1 Address are printed together with the previous label’s data. To print addresses, use normal labels. POS (Format #10-16): 10.
11-33 11. PROGRAMMING PROCEDURES 11.19 FREE FORMAT Available format and print items for free format For the print area size, refer to NOTE 5 on page 11-31.
12-2 12. PROGRAMMED DATA VERIFICATION REPORTS 12. PROGRAMMED DATA VERIFICATION REPORTS Menu # 50 51 52 53 54 55 56 Contents All the preset PLU data are listed in the PLU # order (from small to large #). All the preset commodity names are listed in the PLU # order (from small to large #).
13-1 13. PASSWORD SECURITY 13.1 SETTING PASSWORD AND PROTECT MENU 13. P ASSWORD SECURITY You can protect all menus (except REG. menu) and set two step passwords for access to protected menus. 13.1 SETTING P ASSWORD AND PROTECT MENU ESC. 4 02 34 00 01 04 B 6 w PRT * PRT * PRT * NEXT PLU PROG.
13-2 13. PASSWORD SECURITY 13.1 SETTING PASSWORD AND PROTECT MENU ESC. B 12 26 34 PRT * PRT * w Exclude menus the password B cannot access. Remote display WEIGHT UNIT PRICE TOTAL PRICE 11 1 0 1 - 1 PM R S X Z 0 : Valid 1 : Invalid - : Unnecessary Enter password B as 4 digits.
13-3 13. PASSWORD SECURITY ESC. ESC. 1 C 26 0 Enter a menu No. 0 ~ 6 NEXT PLU VOID or ~ , PRT * Enter the 4-digit Password. Operation PRT * 13.2 CALLING MENU BY ENTERING PASSWORD NOTE: When the password is unknown, enter “HELP” instead, and you can access only security menu.
14-1 14. OPERATING PROCEDURES 14. OPERA TING PROCEDURES ■ NOTES BEFORE STARTING OPERATION (1) Insert the power plug into the AC outlet and turn the power ON. (2) A sixteen-second scanning will be performed after pressing the POWER key. (3) Do not move the scale while it is in operation.
14-2 14. OPERATING PROCEDURES 14.1 WEIGHING OPERA TION Menu: REG., M. DOWN, or REWRAP Mode: WEIGH The weigh mode is used to weigh a commodity and to issue the label. The label contains data such as a weigh, unit price (price per weight) and total price (calculated as a result of the weighing operation).
14-3 14. OPERATING PROCEDURES 14.2 FIX PRICE OPERATION (FOR US TYPE ONLY) 14.2 FIX PRICE OPERA TION (FOR US TYPE ONL Y) The FIX mode (Fix Price Mode ) is used to issue a label for a commodity of a fixed price PLU (i.e. the price determined by the store), the weight of which may vary from commodity to commodity.
14-4 14. OPERATING PROCEDURES 14.3 BY COUNT OPERATION 14.3 BY COUNT OPERA TION The BY-COUNT mode is used to issue the label of commodities of the same kind in a package (or may not be packed). The whole package quantity (or a certain quantity) and the whole package price (or the price per the quantity) are usually preset.
14-5 14. OPERATING PROCEDURES 14.3 BY COUNT OPERATION Example) An open price item can be sold as below: 1 piece at 15 dollars 15 pieces at 10 dollars 15 pieces sold at 0.5 dollars per 10 pieces Enter the PLU #. Press: Press: Press: Enter quantity Enter quantity Enter total price ex.
14-6 14. OPERATING PROCEDURES 14.4 PRINT COUNT OPERATION 14.4 PRINT COUNT OPERA TION With this procedure, a specified number of the same labels can be issued. Menu: REG., M.DOWN, or REWRAP Mode: WEIGH, FIX or BY-COUNT Example A) When operating in Weigh mode.
14-7 14. OPERATING PROCEDURES 14.4 PRINT COUNT OPERATION Example B) When operating in Fix or By Count mode. Press: Set the number of labels. (Max. 99) Press: PRESET COUNT 25 15 PRT * PLU SAVE PRT * The label is issued. The labels are issued with the mount paper attached.
14-8 14. OPERATING PROCEDURES 14.4 PRINT COUNT OPERATION Example C) When issuing only the nutrition information label. Note that nutrition information can be printed only on several types of label.
14-9 14. OPERATING PROCEDURES 14.5 ISSUING LABELS WITH NET WEIGHT STATEMENT (FOR US TYPE ONLY) 14.5 ISSUING LABELS WITH NET WEIGHT ST A TEMENT (FOR US TYPE ONL Y) Menu: REG., M.DOWN, or REWRAP Mode: FIX When the initial settings #1-7 and #1-8 are set to 1, a Net Weight Statement is printed on the label.
14-10 14. OPERATING PROCEDURES 14.5 ISSUING LABELS WITH NET WEIGHT STATEMENT (FOR US TYPE ONLY) NOTES: 1. To print NET WT. data. from the FIX mode, load a label which has an area to print a NET WT Statement. 2. The quantity sold number and price data in NET WT.
14-11 14. OPERATING PROCEDURES 14.6 TARE/SAVE FUNCTION PROCEDURES 14.6 T ARE/SA VE FUNCTION PROCEDURES Menu: REG., M.DOWN, or REWRAP Mode: WEIGH or FIX (Tare % function is available in WEIGH mode only.) There are two kinds of tare subtraction procedures, one is “Direct tare”, the other is “Preset tare”.
14-12 14. OPERATING PROCEDURES 14.7 CALLING AND PRINTING GRADE LINES 14.7 CALLING AND PRINTING GRADE LINES A grade line is a short message added to a commodity name. A grade line can be selected from maximum of 49 programmed grade lines and printed on the label.
14-13 14. OPERATING PROCEDURES 14.8 CALLING AND PRINTING LOGOS 14.8 CALLING AND PRINTING LOGOS When the initial setting #10-7 is set to “1”, a logo containing a picture, a mark, a POP message etc., can be printed on the ingredient label having 12 lines or more for printing ingredient message.
14-14 14. OPERATING PROCEDURES 14.9 SELECTING PRINT ITEM AND ADJUSTING THE LCD BRIGHTNESS 14.9 SELECTING PRINT ITEM AND ADJUSTING THE LCD BRIGHTNESS Menu: REG, M.DOWN, or REWRAP Mode: WEIGH, FIX, or BY COUNT PROG. ~~ NEXT PLU VOID or NEXT PLU VOID or 1 1 11 92 7 3 0 PRT * Press: Select an item.
14-15 14. OPERATING PROCEDURES 14.9 SELECTING PRINT ITEM AND ADJUSTING THE LCD BRIGHTNESS NOTES: 1. A store code can be printed in place of a ‘packed on date’ and ‘sell by date’ by changing the initial settings #6-5 and #6-6. To print a store code, select ‘packed on date’ or ‘sell by date’ as a print item using the above procedure.
14-16 14. OPERATING PROCEDURES 14.11 BATCH PRINT MODE (with 30 Items Run Assignment) 14.1 1 BA TCH PRINT MODE (with 30 Items Run Assignment) Menu: REG., M.DOWN, or REWRAP Mode: FIX, or BY COUNT Up to 99 label per PLU can be issued in non-scale mode. Up to 30 items can be preset.
14-17 14. OPERATING PROCEDURES 14.11 BATCH PRINT MODE (with 30 Items Run Assignment) Changing a Unit Price and Calling G.Line/LOGO x y 30 12 10 GRADE LINE PRT * PRT * LOGO *1 By calling the PLU designation LOGO, the LOGO can be designated per PLU and printed.
14-18 14. OPERATING PROCEDURES 14.11 BATCH PRINT MODE (with 30 Items Run Assignment) Stopping or Canceling Label Issue z C C A Completed VOID PRT * Stop issuing the labels and cancel PLUs which have not been output NOTES: 1. When the label for NET. WT statement is not selected, pressing the PRESET COUNT key in FIX mode results in an error.
14-19 14. OPERATING PROCEDURES 20 PLU Press the speed key the group vendor # is assigned to. Press the speed key the vendor # is assigned to. Enter the last digit of the number. WEIGHT Remote Display Liquid Crystal Display APPLE UNIT PRICE TOTAL PRICE 1.
14-20 14. OPERATING PROCEDURES 14.12 FLOATING VENDOR Price deletion Prices already registered can be deleted in the following procedure. Enter vendor #. VOID VOID NEXT PLU or PRT * C Subtotal The following procedure will sum up all of the registered items.
15-1 15. TOTAL OPERATION 15. T OT AL OPERA TION In Read or Reset mode you can issue a sales report or reset report with either label or journal paper. Menu: READ or RESET READ The totals will not be cleared after they are printed on labels or journal paper.
15-2 15. TOTAL OPERATION 15.1 HOURLY TOTAL REPORT PRT * 0 15.3 PLU TOT AL REPORT PRT * PRT * 11 2 3 PRT * PRT * PRT * 1 2 1 2 2 3 Individual Total A Block Total Zone Total Entire PLU Total B C D Total memory Total memory : Day total : Mark Down total : Rewrap total 1 2 3 Search Code : PLU# : UPC# 1 2 Total memory Search Code 15.
15-3 15. TOTAL OPERATION 15.3 PLU TOTAL REPORT NOTES: 1. When setting the PLU zone, it is not necessary to enter a beginning number which is smaller than an end number. 2. When issuing a block or a zone total report, a PLU with no sales record is not printed.
16-1 16. ERROR MESSAGE TABLE 16. ERROR MESSAGE TABLE 16. ERROR MESSAGE T ABLE Take the following action if an error message has appeared on the commodity name display along with the buzzer sounding. Programming Mode Message Cause Solution DATA ENTRY ERROR MEMORY FULL DUPLICATE PLU PLU NOT FOUND CHAR.
16-2 16. ERROR MESSAGE TABLE 16. ERROR MESSAGE TABLE Label Issue Mode Message Cause Solution DATA ENTRY ERROR PLU NOT FOUND TOTALS OVERFLOW MEMORY WILL FULL PLU DATA ERROR PRT FAILURE LABEL OVER RUN Error in key input. The PLU # being called is not registered.
16-3 16. ERROR MESSAGE TABLE 16. ERROR MESSAGE TABLE Press the CLEAR key. CMT Operation Mode Message Cause Solution MISMATCH SPEC. Mismatch of the model type. Mismatch of the base unit. Mismatch of the VERSION. Mismatch of the TRANS- MITTING DATA. Mismatch of the scale capacity.
17-1 17. CLEANING THE PRINT HEAD 17. CLEANING THE PRINT HEAD 17. CLEANING THE PRINT HEAD Label Cutter WARNING! Since there is a cutter at the paper outlet, be careful not to injure your fingers when cleaning the print head and cutter. If the print head is dirty, printing will not be clear.
18-1 18. TROUBLESHOOTING 18. TROUBLESHOOTING 18. TROUBLESHOOTING Before You Call for Service It is our primary concern to give you full satisfaction and better service.
.
.
PRINTED IN SINGAPORE EM1-31074E E.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Toshiba SL-9000-ESB SERIES c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Toshiba SL-9000-ESB SERIES - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Toshiba SL-9000-ESB SERIES, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Toshiba SL-9000-ESB SERIES va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Toshiba SL-9000-ESB SERIES, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Toshiba SL-9000-ESB SERIES.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Toshiba SL-9000-ESB SERIES. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Toshiba SL-9000-ESB SERIES ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
