Manuel d'utilisation / d'entretien du produit MDX-C670 du fabricant Sony
Aller à la page of 24
Operating Instructions 1997 by Sony Corporation EN FM / AM MiniDisc Player MDX-C670 For installation and connections, see the supplied installation/connections manual. Owner’s Record The model and serial numbers are located on the bottom of the unit.
2 EN W elcome ! Thank you for purchasing the Sony MiniDisc Player. This unit lets you enjoy a variety of features by using a rotary remote. In addition to the MD playback and the radio operations, you can expand your system by connecting an optional CD/MD changer.
3 EN T able of Contents With Optional Equipment CD/MD Changer Playing a CD or an MD .................................... 12 Scanning the tracks — Intro Scan ................................................. 13 Playing tracks repeatedly — Repeat Play .
4 EN Getting Started Resetting the unit Before operating the unit for the first time or after replacing the car battery, you must reset the unit. Press the reset button with a pointed object, such as a ballpoint pen. Note Pressing the reset button will erase the clock and some memorized functions.
5 EN Setting the clock The clock has a 12-hour digital indication. Example: Set the clock to 10:08 1 Press (SHIFT) , then press (2) (SET UP). 1 Press (4) ( n ). 2 Set the hour. 3 Press (4) ( n ). 4 Set the minute. 2 Press (SHIFT) . 3 Press (SHIFT) . When the mode setting is complete, the normal playback mode appears.
6 EN Locating a specific track — Automatic Music Sensor (AMS) During playback, press either side of (SEEK/AMS) momentarily. Locating a specific point in a track — Manual Search During playback, press and hold either side of (SEEK/AMS) . Release the button when you have found the desired point.
7 EN 3 Press (4) ( n ) to select “Intro on.” Playback starts. 4 Press (SHIFT) . To go back to the normal playback mode, select “Intro off” in step 3 above. Playing tracks repeatedly — Repeat Play 1 During playback, press (SHIFT) . 2 Press (6) (REP) repeatedly until “Repeat 1” appears.
8 EN Note If the automatic tuning stops too frequently, press (SHIFT) , then press (3) (PLAY MODE) repeatedly until “Local” (local seek mode) is displayed. Then press (4) ( n ) to select “Local on”. Press (SHIFT) . Only the stations with relatively strong signals will be tuned in.
9 EN Storing the station names —Station Memo You can assign a name to each radio station and store it in memory. The name of the current station appears in the display. You can store up to eight characters for each station. Storing the station names 1 Tune in a station whose name you want to store.
10 EN Other Functions Using the rotary r emote The rotary remote works by pressing buttons and/or rotating controls. You can control the optional CD or MD changer with the rotary remote.
11 EN Changing the sound and display settings You can set: • Clock (page 5) • D.Info (Dual Information) to display the clock and the play mode at the same time (ON) or to display the information alternately (OFF). • Amber/Green to change the illumination color to amber or green.
12 EN Automatically scrolling a disc name — Auto Scroll If the disc name/artist name or track name on a CD-TEXT disc or MD exceeds 10 characters and the Auto Scroll function is on, automatically scrolls on the display as follows: • The disc name appears when the disc has changed (if the disc name is selected).
13 EN Playing tr acks in random or der — Shuffle Play You can select: • Shuf 1 to play the tracks on the current disc in a random order. • Shuf 2 to play the tracks in the current changer in a random order. • Shuf 3 to play all the tracks in a random order.
14 EN If you rotate the dial in a counterclockwise direction, the characters appear in the reverse order. If you want to put a blank space between characters, select “_” (under- bar). 2 Press (4) ( n ) after locating the desired character. The flashing cursor moves to the next space.
15 EN Locating a disc by name — List-up (CD changer with custom file function or MD changer) You can use this function for the discs that have been assigned a custom name. For more information on disc names, refer to “Labeling a CD.” 1 Press (LIST) momentarily.
16 EN Make sure that it is not left on the dashboard or rear tray of a car etc. where the temperature can also be excessive. Notes on mounting labels Be sure to mount labels on cartridges correctly, as failing to do so may cause an MD to become stuck in the changer.
17 EN Maintenance Fuse replacement When replacing the fuse, be sure to use one that matches the amperage described on the fuse. If the fuse blows, check the power connection and replace the fuse. If the fuse blows again after replacement, there may be an internal malfunction.
18 EN Location of controls Refer to the pages for details. 1 SEEK/AMS (seek/Automatic Music Sensor/manual search) button 6, 8, 12, 15 2 SOUND button 11 3 MODE (band/changer select) button 7, 8, 12, 14.
19 EN Additional Information Other specifications MD player section Signal-to-noise ratio 90 dB Frequency response 10 – 20,000 Hz Wow and flutter Below measurable limit Laser Diode Properties Material GaAIAs Wavelength 780 nm Emission Duration Continuous Laser output power Less than 44.
20 EN T roubleshooting guide The following checklist will help you remedy the problems that you may encounter with your unit. Before going through the checklist below, check the connection and operating procedures. General Problem No sound The contents of the memory have been erased.
21 EN Solution Insert the disc in the CD/MD changer. Insert the discs in the CD/MD changer. Insert another CD/MD. Clean or insert the CD correctly. Insert another MD. Play an MD with recorded tracks on it. Press the reset button of the unit. Close the lid or inserted the MDs properly.
22 EN Inde x A Automatic Music Sensor (AMS) 6, 12 Automatic tuning 8 Auto Scroll 6, 12 B Balance 11 Bank Play 15 Bass 11 Beep tone 11 Best Tuning Memory (BTM) 7 C Caution alarm 4 CD playback 12 Clock .
23 EN.
Sony Corporation Printed in Japan *I-3-859-436-51* (2).
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Sony MDX-C670 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Sony MDX-C670 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Sony MDX-C670, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Sony MDX-C670 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Sony MDX-C670, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Sony MDX-C670.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Sony MDX-C670. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Sony MDX-C670 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
