Manuel d'utilisation / d'entretien du produit DC-TS 760 du fabricant Sanyo
Aller à la page of 28
INSTRUCTION MANUAL DVD Home Theatr e System DC-TS760 REMOTE CONTROLLER RB-TS760ST.
1 PRECAUTIONS CAUTION THIS PRODUCT CONTAINS A LOW POWER LASER DEVICE, TO ENSURE CONTINUED SAFETY DO NOT REMOVE ANY COVERS OR ATTEMPT TO GAIN ACCESS TO THE INSIDE OF THE PRODUCT. REFER ALL SERVICING TO QUALIFIED PERSONNEL. - The apparatus shall not be exposed to dripping or splashing.
2 CONTROLS 1. Disc tray 2. Open/Close button ( q ) 3. Function button (FUNCTION) 4. Preset tuning, Skip/Next/Previous buttons ( f – PRESET + e ) 5. Display 6. Stop button ( n ) 7. Play button ( a ) 8. Power button ( z /ON) 9. Headphones socket (PHONES) 10.
3 REMOTE CONTROL Note: In this instruction manual, any operation of pressing any button while pressing the SHIFT button is as shown below. Example: “Press the SHIFT + 1 ANGLE buttons.” Controls 1. Power button ( z /ON) 2. Number and other function buttons Number buttons (1 - 9, 0) Angle button (ANGLE) Angle replay button (A.
4 INPUT BASIC CONNECTIONS After all connections have been made, connect the mains lead to an AC outlet . Note: - Do not connect the mains lead to an AC outlet until all connections have been made. - The system is not completely disconnected from the mains when the z /ON button is set to the z position.
5 120 ° 30 ° 30 ° Speaker placement Example: To hang the speaker on a wall Example: To mount the speaker with a stand Approx. 3 mm Stand (not supplied) Screw (supplied) Built-in special nut, 3/16 i.
6 R-AUDIO-L VIDEO AUDIO VIDEO INPUT 1 Connecting to a TV with the video lead Connect the video lead between the MONITOR OUT VIDEO socket of the unit and the video input socket of the TV. TV Notes on connections - Please refer to the instruction manuals for the components that you are connecting (TV, VCR, etc.
7 AUDIO OUT R L S-VIDEO IN 1 1 2 ADDITIONAL CONNECTIONS EXAMPLES Connecting to a TV with an EURO-AV/SCART lead Please follow the steps below before turning on the power. 1. If your TV has an EURO-AV/SCART socket, connect the unit as shown. (Do not connect the video lead to the MONITOR OUT VIDEO socket.
8 SYSTEM CONNECTIONS EXAMPLES AUDIO OUT R L IN OUT AV AERIAL AERIAL IN AUDIO OUT R L AERIAL IN JCX-TS760, TV and Audio equipment JCX-TS760, TV and VCR TV EURO-AV/SCART lead (not supplied) Audio lead (.
9 AUDIO OUT R L IN OUT OUT IN/OUT AUDIO OUT R L IN OUT AV AERIAL AERIAL AV AERIAL IN AUDIO OUT R L AUDIO OUT R L IN OUT AV AERIAL AERIAL IN JCX-TS760, TV, VCR and Audio equipment JCX-TS760, TV, VCR, S.
10 BEFORE OPERA TION Turning the power on and off Press the z /ON button. “HELLO” appears briefly on the display. (After connecting the mains lead, when you press the z /ON button for the first time, the volume-reset feature automatically sets the initial volume level.
11 Selecting surround mode Press the SURROUND button to select the surround mode. Each time the button is pressed, the surround mode changes as follows: AUTO v QS 5.1 ST v QS 5.1 MN v 2.1ch . . . When “DVD/CD” function is selected AUTO The unit selects the surround mode automatically depending on the disc.
12 PLA Y ABLE DISCS The following types of discs can be played on this unit. Region number Region number (Regional restriction code) is built-in to the unit and DVD discs. There is a region number on the rear of the unit. The same region number or region number “ALL” of DVD discs can be used on this unit.
13 Preparations - Turn on the TV and select the video input for this unit. To use the remote control for TV The remote control must be pointed toward your TV. 1. Press the TV POWER button to turn on the power. 2. Press the TV/VIDEO button to select the video input source.
14 V ARIOUS DISC PLA YING FUNCTIONS “ ” may appear on the TV screen during operation. This icon means that the function is not available on the disc now. Selecting a DVD menu [DVD] 1. Press the MENU button. The main menu screen appears. Note: Press the MENU button again to resume play.
15 Picture zoom (Pin point zoom) [DVD] 1. Press the SHIFT + 3 ZOOM buttons during normal, slow or still play. The pin point guide screen appears. - If you quit the screen, press the SHIFT + 3 ZOOM buttons. 2. Press the 4 , a , 5 or b button, then the ENTER, or press the number button to select the zoom point.
16 Programmed play [VCD] [CD] Up to 20 selections can be programmed. Programming procedure 1. Press the PROGRAM/RANDOM button once (VCD) or twice (CD) in the stop mode. The programme mode screen appears and “PGM” blinks on the display. 2. Press the number buttons to select the track number.
17 Example for VCD: 1. Press the ON SCREEN button during play. 2. Press the ON SCREEN button again. 3. Press the ON SCREEN button again to close the disc information. Note: For Audio CD, please refer to “Example for VCD” as above. Selecting picture mode Press the PICTURE MODE button.
18 MP3/WMA CD OPERA TION Before starting This unit can play back the CD that has recorded music data, MP3 or WMA (Windows Media Audio) files. - The file system is ISO9660 level 1 and level 2. - If the CD has both audio CD tracks and MP3/WMA files, only audio CD tracks are played.
19 If you press the MENU button, the file list appears. Example: To start the slide show from the file list: 1. Press the 4 , a , 5 or b button to select the desired file. 2. Press the ENTER or a (Play) button to start the slide show. The file list appears after the last picture has displayed.
20 Setting display 1. Press the SETUP button in the stop mode. The setup screen appears. 2. Press the a (Directional arrow) button to select “Display”, then press the ENTER button. “Display” screen appears. 3. Press the 5 or 4 button to select the item (highlighted), then press the ENTER button.
21 Setting parental 1. Press the SETUP button in the stop mode. The setup screen appears. 2. Press the a (Directional arrow) button to select “Parental”, then press the ENTER button. “Parental” screen appears. 3. Press the 5 button to skip “Password: ----” and select “Level”.
22 LANGUAGE CODE LIST 6565 aa Afar 6566 ab Abkhazian 6570 af Afrikaans 6577 am Amharic 6582 ar Arabic 6583 as Assamese 6589 ay Aymara 6590 az Azerbaijani 6665 ba Bashkir 6669 be Byelorussian 6671 bg B.
23 To turn the unit on and listen to the last received station, press the TUNE/BAND button. Automatic/Manual tuning 1. Press the TUNE/BAND button to select FM or AM. 2. Automatic tuning Press the TUNE/PTY “+” or “–” button for at least 1 second to tune in a station.
24 SLEEP TIMER OPERA TION The sleep timer automatically switches off the power after a preset time has elapsed. The volume will gradually be reduced (fade-out) during the 1-minute period before the unit turns off. There are 4 time periods available: 30, 60, 90 and 120 minutes.
25 TROUBLESHOOTING GUIDE If you have followed the instructions and are having difficulty operation the unit, locate the SYMPTOM in the left column below. Check the corresponding POSSIBLE CAUSE and CORRECTIVE ACTION columns to locate and remedy the problem.
26 SPECIFICA TIONS Amplifier Main amplifier Stereo mode 33 W x 2 (at 8 ohms, 10% distortion) Dolby Digital mode 33 W x 2 (at 8 ohms, 10% distortion, with Centre/Surround/ Subwoofer amplifier off) Cent.
(UK) 1AD6P1P1839-BA SANYO Electric Co., Ltd. GUARANTEE TO CUSTOMER Sanyo Europe Ltd. (the Company) guarantees to the initial retail purchaser that if this equipment is or becomes defective and that, i.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Sanyo DC-TS 760 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Sanyo DC-TS 760 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Sanyo DC-TS 760, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Sanyo DC-TS 760 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Sanyo DC-TS 760, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Sanyo DC-TS 760.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Sanyo DC-TS 760. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Sanyo DC-TS 760 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
