Manuel d'utilisation / d'entretien du produit CA7 du fabricant Samsung
Aller à la page of 40
4 Channel Digital Video Image Recor der (D VR) CA7 Installation and Operating Instructions These instr uctions should be retained in a safe place for future ref erence.
2 1 INTR ODUCTION 3 2 KIT CONTENTS 4 3D VR FEA TURES 5 4 PHYSICAL UNIT 6 4.1 F ront P anel 6 4.1.1 D VR Button Functions 6 4.2 Rear P anel 8 5 HARDW ARE SETUP 9 5.1 Hard Disk Driv e Installation 9 5.2 Monitor Connection 9 5.3 Camera(s) Connection 9 5.
3 INTR ODUCTION Section 1 The Response 4 Channel D VR provides a total video security solution for 4 channel digital sur veillance suppor ting duplex (simultaneous pla yback and record) functionality . The D VR’s front panel buttons or mouse can operate all D VR menu settings.
4 KIT CONTENTS Section 2 1x 4 Channel DVR unit (with a 160GB hard drive unit fitted in the dra wer) 1x Po w er adaptor and power cord 1x V ideo output to monitor cable (1m) 2x BNC to RCA adaptor s 1x .
5 D VR FEA TURES Section 3 ● Tr ue duplex functionality: simultaneous play / record ● PA L/ NTSC opera tion ● 160GB installed hard driv e unit ● High quality colour Video at 50fps or 60fps recording / playback ● R ecording speed: P AL max. 50fps (quad); NTSC max.
6 PHY SICAL UNIT Section 4 4.1 F ront P anel ● LED Lights: (a) GREEN (PWR): The D VR unit is powered up and running. (b) RED (HDD): System is recording or in playback mode .
7 – Quad Use this button for full screen displa y of all 4 video channels on the monitor screen. If you push this button, the D VR will display all 4 channels (cameras) at the same time in quad screen. – ● (REC) Press “REC” button to star t manual recording.
8 – U P/D O W N To c hange the menu field, use the up “ ” or down “ ”b uttons. – SEL Use this button to change values on main menu or sub menu setting. Also use this button to increase values when adjusting parameters. 4.2 Rear P anel ● USB POR T Use this por t to backup video on to a USB stick for transf er ring on to a PC.
9 HARDW ARE SETUP Section 5 5.1 Hard Disk Dri ve Installation Note: Only read if y ou wish to replace / upgrade the e xisting supplied 160GB hard driv e unit fitted in the DVR. 1. Unlock the front hard driv e drawer using the k ey supplied. 2. Pull the drawers le ver to remo ve the dr awer from the D VR.
10 Note: If this DVR is used with the Wireless Colour Camera CCTV Kit (CWFK1), the video output from the receiv er can be connected to either channel 1, channel 2, channel 3 or ch annel 4, to view the wireless camera. 5.4 Mouse Connection Connect the PS / 2 mouse to the por t shown on the D VR.
11 SETUP Section 6 If you ha ve just replaced the e xisting hard drive with a new hard dri ve on the system, it is advised to f or ma t the hard driv e first.
B: Set up using the Mouse After the system has booted-up , click the right mouse button and the login window will appear . Mov e the cursor to “ Account”, and click the left mouse button and input the cor rect account by mo ving the cursor ov er the correct numbers / c haracters and left clicking the mouse button to select them.
13 6.1 Camera Use this option for video colour adjustment for each channel (1, 2, 3, 4). Mov e to the “Display” option to enable or disable the screen display of each camera.
14 6.2.1 [RECORD FRAMERA TE] Change the record frame r a te for each c hannel - see Fig. 6.07. The higher the record frame rate , the more na tural mov ement you will see in playback.
15 period. The user can select the same record method for the whole 24 hr period in one go . Mov e the cur sor to 24 and press [QUAD] button in the D VR front panel, or left c lick the mouse button on the time period 24. - Grey bar: No recording will be made for this time period unless the user activates manual recording.
16 6.3.2 [EVENT REC DURA TION] This sets the recording duration (in seconds) after motion recording is activated. Selection values are “ 0 5 , 10 , 15 , 20 , 25 , 30 ” (in seconds). 6.3.3 [MO TION DETECTION] [CHANNEL] Select the channel (1, 2, 3, 4) for recording by motion detection (Fig.
17 [MO TION AREA] Note: T o star t Motion Record, the user must complete the “Motion Area” setup . Use this option to select the range of motion detection area. Use the D VR’s front panel buttons or mouse click to assign the area. The front panel and mouse control instructions are below .
18 6.4.3 [VIDEO ADJUSTMENT] Y ou can mov e the entire video screen up , down, left and right using this option. Ke ypad assignment on the front panel is below . – CH1 for up , CH2 for down, CH3 for left, CH4 for right. Mouse function is below: Click the right mouse button and the following icons will appear: .
19 6.5.1 Hard Disk Setup [O VERWRITE ENABLED] If you select Y es, then recording continues and ov erwrites the previous recording when the hard disk driv e space is full. If you select No , then recording stops when the hard disk driv e is full. It won ’t record until “ov erwrite ena ble” is “Y es” (Fig.
20 6.5.2 Account Setup Log into the main menu (see 6. SETUP ). Mov e the cur sor down to ‘System’ and press [SEL] button or click the left mouse button to select.
21 6.5.3 Pass word Setup The default passw ord is 111111. All numbers, letters and symbols in the bo x can be used to set the passw ord (Fig. 6.22). Press [SEL ] to input values, and mo ve the prompt to the option of “Enter”, press [SEL ] to input cur rent passw ord.
22 6.5.6 Time Set Y ou can adjust the cur rent time, date and y ear at any time b y region. Set your region first and then set the cur rent time so that the video back-up da ta can be play ed without time shifting later on.
23 To playback by Ev ent list, using the [UP] / [DOWN] or channel number (CH3 for P a ge Up or CH4 for P age Down) k ey on the front panel, select the ev ent that you want to pla yback and press the [PLA Y] button.
24 PLA YB A CK WITH TIME SEAR CH FUNCTION Section 7 This is an enhanced playback option, which enables the user to manually adjust to a specific star ting time f or playback (Fig 7.01). Fr ont Panel Control: In order to playback with time search function, press the [PLA Y] button on the front panel first.
25 BA CKUP VIA USB MEMOR Y STICK Section 8 Note: The USB memory stick is not supplied with this kit. Please purchase only the listed USB models in the Appendix section (11.
26 Select “Star t” on the screen to begin the back up process (Figs . 8.02 to 8.04). It will tak e a few minutes to write the video data to the USB memor y stick.
27 RECORDING LENGTH Section 9 V ideo system is “P AL ”. Estimate recording time basing on a 160GB hard driv e. The best record quality is 3, and the lowest record quality is 1. R ecord Speed REC Quality D A T A RA TE Record Time (GB/Hour) (Hour) 3 4.
PLA YB A CK WITH BA CKED -UP VIDEO D A T A ON PC Section 10 10.1 Softwar e Installa tion The PC backup CD provided is only compatible with Windows based operating systems including Vista. 1. Inser t the Dri ver Program CD in your CD-R OM. 2. Install by setup .
29 10.3 Button Functions 1. Open File 2. Fast Backward 3. Play Re verse 4. Previous F rame 5. Pause 6. Next F rame 7. Play 8. Fast forw ard 9. Still Ca pture 10. Split 1 11. Split 4 12. V olume Scroll Bar 13. Mute On / Of f 14. Playing Scroll Bar 15. Minimize the window 16.
30 2. Still Capture. Click “ ” to capture an image from a video . Click the right mouse button to select “Options…” to setup the path for still capture. Click the left mouse button to select the folder that you want. F or e xample select the folder as “E: V OC 4CH backup”.
31 5. T ranslating the “V VF File F or ma t (*.V VF)” into “ A VI File F or mat (*.A VI)”. After translating to an A VI file, the file can then be play ed back using software such as Windows Media play er or play ed back on an MP4 player f or example .
32 6. Capture. If you w ant to sav e par t of a VVF file (*.V VF) on your computer rapidly , you must ensure any video pla yback is paused. Drag the playing scroll bar to select the star t time , click the right mouse button to select the option “Capture”, then left c lick “Mark In”.
33 TR OUBLE SHOO TING Section 11 PR OBLEM SOLUTION No picture can be viewed The power supply adaptor for the camera(s) or D VR is not plug ged in. Check all video cable connectors between the cameras and the D VR. The TV is not tuned to view the cor rect channel.
34 APPENDIX Section 12 12.1 Compatible USB Memor y Sticks with the D VR Note that only the following USB devices are compatible with this D VR model. W orking Device List Maker Model Size Sony MICRO V.
35 12.2 Specification ITEM 4 CHANNEL D VR V ideo format P AL / NTSC Operation system Linux Vi deo input 4 channel composite BNC Vi deo output 1 channel composite BNC Display speed P AL: 100fps (4 x 25.
36 A CCESSORIES IN THE RANGE Section 13 There are a range of accessories available in the Response CCTV product rang e to expand y our system: CWK1 Wired Colour Camera CCTV Kit CA1 2 Channel Digital V.
37 DISPOSAL – RECY CLING INSTR UCTIONS Section 14 Directiv e (2002/96/EC) This product is classified by the W aste Electrical or Electronic Equipment (WEEE) Directiv e .
38 GU ARANTEE Section 15 Novar ED&S under takes to replace or repair at its discretion goods (e xcluding non rechargeable batteries) should they become defectiv e within 1 year solely as a result of faulty materials and workmanship .
39.
Nov ar Electrical Devices and Systems Limited. (A Honeywell Company) The Ar nold Centre, P aycock e Road, Basildon, Essex SS14 3EA. UK www .friedland.co.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Samsung CA7 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Samsung CA7 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Samsung CA7, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Samsung CA7 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Samsung CA7, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Samsung CA7.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Samsung CA7. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Samsung CA7 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
