Manuel d'utilisation / d'entretien du produit IS 2325 du fabricant Ricoh
Aller à la page of 126
Operating Instructions Troubleshooting Read this manual carefully before yo u use this machi ne and keep it h andy for future reference. For safe and corre ct use, be sur e t o rea d th e Safety Informatio n in "About This Machi ne" before using the ma chine.
Introduction This manual contains detailed instructions and note s on th e operation and use of this ma chine. For your safety and benefit, read this manual carefully be fo re using the machine. Kee p this manual in a handy place for quick reference. Important Contents of this manual are subject to change witho ut prior notice.
i Manuals for This Machine Refer to the manuals that are relevant to what y ou want to do w ith the machine. Manuals for machin es with cop ier functi on only or with the DDST Unit are dif- ferent. See “Manuals for Machines with Copier Function Only o r with the DDST Unit”.
ii ❖ Printer Reference Explains Printer functions and operations. ❖ Scanner Reference Explains Scanner functions and operations. ❖ Network Guide Explains how to configure and operate the machine in a network environ- ment, and use the software provided.
iii Manuals for Machines with Copier Function Only or with the DDST Unit This section describes the manuals for ma chines with copier function only or with the DDST Unit. ❖ About This Machine Be sure to read the Safety Information in this manual before using the machine.
iv TABLE OF CONTENTS Manuals for This Machine .............................................. ........................................ i Manuals for Machine s with Copier Function On ly or with the DDST Unit ................. iii How to Read This Manual .
v 5. Troubleshooting When Using the Scanner F unction When Scanning Is Not Done As Expected ................................................... ..... 57 When You Cannot Send Scanned Files .................................. ........................... 58 When You Cannot Browse the Network to Send a Scanned File .
vi 9. Remarks Where to Put Your Machine ................................................................ .............. 109 Machine Environment ..................... ................ .............. .............. .............. ............. 109 Moving .
1 How to Read This Manual Symbols This manual uses the foll owing symbols: Indicates important sa fety notes. Ignoring these notes could resu l t i n s e r i o u s i n j u r y o r d e a t h . B e s u r e t o r e a d t h e s e notes. They can be found in the “Safety Information” section of About This Machine.
2.
3 1. When the Machine Does Not Operate As Wanted This section descr ibes basic troubles hooting procedu res that are applic able to all functions of this machine. Indicators This section e xplains the in dicators that light up when the machine requires the user to remove misfed paper, to add paper, or to perform other procedures.
When the Machine Does Not Operate As Wanted 4 1 Panel Tone The following tabl e explains the various bee p patterns that the machine produces to alert users about machine conditions.
When the Function Status Indicator Lights Up in Red 5 1 When the Function Status Indicator Lights Up in Red If a function key is lit in red, press the key to switch to the screen for the corre- sponding function, and then follow the message that appears.
When the Machine Does Not Operate As Wanted 6 1 When You Have Problems Operating the Machine The following chart give s explanations of common proble ms and messages. If other messages appear, foll ow the instructions displayed. Problem Cause Solution “ Please wait.
When You Have Problems Operating the Machine 7 1 Original images are printed on the reverse side of the paper. You may have loaded the paper incorrectly. Load paper correctly. Load paper into Tray 1-4 with the print side up, and into the b ypass tray with the print side down.
When the Machine Does Not Operate As Wanted 8 1 Note ❒ If you cannot make copies as you want because of paper type, paper size, or paper capacity problems, use recommend ed paper. See “Copy Paper”, About This Machine. Reference “Copy Paper”, About This Machine “ Privileges are required to use this function.
When a Job Is Not Performed 9 1 When a Job Is Not Performed If you cannot execute a function, it may b e that the machine is being held up by another function. If you cannot exec ute a function, te rmin ate any other functions curre ntly active, and then try ex ecuting the functio n again.
When the Machine Does Not Operate As Wanted 10 1 ... means that these functions can be used together. ... means that you can interrupt the current job with the function keys to proceed to a subsequent job. ... m e a ns t h a t a no th er jo b w ill automatically start after the current job is finished.
11 2. Troubleshooting When Using the Copy Function This chapter de scribes likely caus es of and pos sible solutio ns for copier fu nction problems. When a Message Is Displayed The following chart contains explanations for common messages. If other mes- sages appear, follow the instruct ions as they are displayed.
Troubleshooting When Using the Copy Function 12 2 Image not fully cop- ied. The entire image cannot be fully copied using the current [ Auto R/E ] setting. Make an alternative [ Auto R/E ] setting. Rotate Sort is una- vailable with this paper size. A paper size for which Rotate Sort is not available is sel ected.
When a Message Is Displayed 13 2 Reference p.6 “When You Have Problems Operating the Machine”.
Troubleshooting When Using the Copy Function 14 2 When You Cannot Make Clear Copies This section descr ibes likely caus es of an d possible solutions for unclear copies. Problem Causes Solutions Copies appear dirty. Image density is too dark. Adjust the image density set- tings.
When You Cannot Make Clear Copies 15 2 A shadow appears on copies if you use pasted originals. Image density is too dark. Adjust the image density set- tings. See “Adjusting Image Density”, Copy Reference. Change the orientation of the original. Put mending tape over the pasted areas.
Troubleshooting When Using the Copy Function 16 2 Black spots appear on the copy of a photographic print. Because of high humidity, the photographic print has stuck to the exposure glass.
When You Cannot Make Copies As Wanted 17 2 When You Cannot Make Copies As Wanted This section describes causes and remedies when copy re sults are not as expected. ❖ Basic Problem Causes Solutions Misfeeds occur frequently. The number of sheets loaded exceeds the capacity of the machine.
Troubleshooting When Using the Copy Function 18 2 ❖ Edit ❖ Combine Copies are not stapled. The number of co pies exceed s the capacity of the stapler. Check the stapler capacity. See “Supplementary Informa- tion”, Copy Re ference. Copies are not stapled.
When You Cannot Make Copies As Wanted 19 2 ❖ Duplex When Memory Is Full Problem Causes Solutions Cannot print in duplex mode. You may have loaded paper on the bypass tray. Remove paper loaded on the bypass Tray. Load paper in Tray 1 - 4. Cannot print in duplex mode.
Troubleshooting When Using the Copy Function 20 2.
21 3. Troubleshooting When Using the Facsimile Function This chapter describes likely causes of and possible solutions for facsimile func- tion problems. Adjusting the Volume The following descr ibes how to adjust the volume. You can change the volume of the follo wing sounds that the machine makes.
Troubleshooting When Using the Facsimile Function 22 3 C Select [ General Settings/Adjust ] using {U} or {T} , and then press t he { OK } key. D Select [ Adjust Sound Volume ] using {U} or {T} , and then press the { OK } key. E Select the item you want to adjust using {U} or {T} , and then press the { OK } key.
Adjusting the Volume 23 3 Note ❒ You can also adjust the On Ho ok volume when y ou press the { On Hook Di- al } key. See “On Hook Dial”, Facsimile Reference. ❒ If the Extended Security function prevents you from chang ing this setting, contact the ad ministrator.
Troubleshooting When Using the Facsimile Function 24 3 When a Message Is Displayed This section describes the machine's ma in messages. If other messages appear, follow their instructions. Message Cause Solution Error occurred, and trans. was cancelled.
When a Message Is Displayed 25 3 You do not have privileges to use this func- tion. The use of this function is restrict- ed to authentified use rs only. Contact the administrator. Authentication failed. The entered login user name or password is incorrect.
Troubleshooting When Using the Facsimile Function 26 3 Check whether there are any network prob- lems. { 13-10 } The alias telephone number you entered is already registered on the gatekeeper by another device. • Check the alias telephone number is correctly pro- grammed using the Web Im- age Monitor.
When a Message Is Displayed 27 3 Check whether there are any network prob- lems. { 14-01 } Cannot find the DN S server, SMTP server o r folder for forwarding. • Check that the DNS server IPv4 address is correctly pro- grammed using Web Image Monitor.
Troubleshooting When Using the Facsimile Function 28 3 Check whether there are any network prob- lems. { 14-09 } E-mail transmission was refused by SMTP authentication, POP be- fore SMTP authentication or login authentication of the computer in which the folder for forwarding is specified.
When a Message Is Displayed 29 3 Check whether there are any network prob- lems. { 15-02 } Cannot log on to the POP3/IMAP4 server. • Check that the user name and password of the E-mail Ac- count are correctly pro- grammed from [ File Transfer ] under [ System Settings ] .
Troubleshooting When Using the Facsimile Function 30 3 Note ❒ If “ Check whether there are any network problems. ” appears, the ma- chine is not correctly conne cted to the ne twork or the settings of the machine are not correct.
When You Cannot Send or Receive Fax Messages As Wanted 31 3 When You Cannot Send or Receive Fax Messages As Wanted This section describes likely causes of and possible solutions for transmission and reception-related problems. ❖ Transmission/Reception ❖ Transmission Problem Cause Solution Both transmission and reception are impossible.
Troubleshooting When Using the Facsimile Function 32 3 ❖ Reception Cannot cancel a Memo- ry Transmission. The document is being sent or it is in standby. Press the { Clear/Stop } key. See “Canceling a Transmission”, Fac- simile Reference. Cannot cancel an Im- mediate Transmission.
When You Cannot Send or Receive Fax Messages As Wanted 33 3 ❖ Printing Problem Cause Solution Print is slanted. The tray's side fences may not be locked. Check the side fences are locked. See p.92 “Changing the Paper Size”. Print is slanted.
Troubleshooting When Using the Facsimile Function 34 3 The image is too dark or too light. The correct paper type settings are not made. Check the paper loade d on the paper tray or bypass tray matches the paper type set on the display panel. See “Copy Paper”, About This Machine.
When You Cannot Send or Receive Fax Messages As Wanted 35 3 ❖ Others When Memory Is Full This section describes likely causes of and possible solutions for problems relat- ed to full memory. Problem Cause Solution All fax documents stored in memory have been lost.
Troubleshooting When Using the Facsimile Function 36 3 When an Error Report Is Printed A n E r r o r R e p o r t i s p r i n t e d i f a d o c u m e n t c a n n o t b e s u c c e s s f u l l y s e n t o r r e c e i v e d . Possible causes include a problem with the machine or noise on the tele phone line.
Turning Off the Main Power / In the Event of Power Failure 37 3 Turning Off the Main Power / In the Event of Power Failure This section de scribes the machin e status whe n the power is turned of f or if the power fails. R CAUTION: Important ❒ Do not turn off the main po wer switch while the operation switch indicator is lit or blinking.
Troubleshooting When Using the Facsimile Function 38 3 When an Error Occurs Using Internet Fax This section describes reports that the mach ine sends if an Internet Fax error occurs. Error Mail Notification The machine sends the Error Mail Notificati on to the sender when it is unable to successfully receive a particular e-mail messa ge.
39 4. Troubleshooting When Using the Printer Function This chapter describes likely causes of an d possible solutions for printer f unction problems. When using the DDST Unit, see “Troubleshooting When Using the DDST Unit”.
Troubleshooting When Using the Printer Function 40 4 Windows XP Professional or Windows Server 2003 This section describes the procedure under Wind ows XP Professional or Windows Server 2003. A On the [ Start ] menu, click [ Printers and Faxes ] . B Click [ Add a printer ] .
When a Message Is Displayed during Installation of the Printer Driver 41 4 Windows Vista This section describes the procedure under Windows Vista. A On the [ Start ] menu, click [ Control Panel ] . B Click [ Hardware and Sound ] . C Click [ Printers ] .
Troubleshooting When Using the Printer Function 42 4 When a Message Is Displayed This section describes the principal mess ages that appear on the display panel. If a message not described here appears, act according to the message . Note ❒ Before turning the main power off, s ee “Turning On the Power” , About This Machine.
When a Message Is Displayed 43 4 Alert Messages This section describes the machine alert messages. Message Cause Solution Problem:Wire- less card An error may have occurred in the IEEE 802.11b card. Turn off the main power switch, and back on again. If the message appears again, contact your sales or service representative.
Troubleshooting When Using the Printer Function 44 4 Problem with unit. Finisher [JobReset] There is a problem with the finisher. Turn the power off, and then on. If the message app ears again, contact your sales or service representative. Authentication failed.
When a Message Is Displayed 45 4 Printing the Error Log If files could not be printed due to printing errors, print the error log to identify the problem. A Press the { User Tools/Counter } key. B Select [ Printer Features ] using {U} or {T} , and then press the { OK } key.
Troubleshooting When Using the Printer Function 46 4 When You Cannot Print Use the following procedur es if printing does not start even after performing [ Print ] . Problem Cause Solution Printing does not start. The power is off. Check the cable is securely plugged into the power outlet and the machine.
When You Cannot Print 47 4 If the printing does not start, co ntact your service representa tive. Printing does not start. If the machine is operating in an extended wireless LAN, the re- ceiver's MAC address may be preventing communication with the access point.
Troubleshooting When Using the Printer Function 48 4 ❖ When the machine is connected to the computer using the interface cable The following show s how to check the print po rt when the D ata In indicator does not light up or blink. Check if the pr int port settin g is correct.
Other Printing Problems 49 4 Other Printing Problems This section describes likely causes of and possible solutions for problems that can occur when printi ng from a computer. ❖ When you cannot print clearly Problem Cause Solution The print on the entire page is faded.
Troubleshooting When Using the Printer Function 50 4 ❖ When certain settings are re quired on the printer driver The image is too dark or too light. The paper is loaded reverse side up. Before printing on special paper, check its surface careful- ly.
Other Printing Problems 51 4 Some types of data, such as graphics data or data from cer- tain applica- tions, do not print. The correct printer driver settings are not made. ❖ PCL 6/5e On the [ Print Quality ] tab, click [ Off ] in the [ Toner saving ] area, and then print.
Troubleshooting When Using the Printer Function 52 4 The printed im- age is different from the image on the computer display. With certain functions, such as enlargement and reduction, image layout might be differ- ent to that on the computer display.
Other Printing Problems 53 4 Photo images are coarse. Some applica- tions print at lower resolution. Use the application's settings to specify a higher resolution. Solid lines are printed as bro- ken lines. Dither patterns do not match. Make the following settings with the printer driver : •I n t h e [ Change User Settings.
Troubleshooting When Using the Printer Function 54 4 ❖ When paper is not fed properly Problem Cause Solution Paper is not fed from the select- ed tray. When you are us- ing a Windows operating sys- tem, printer driv- er settings override those settings using the display panel.
Other Printing Problems 55 4 ❖ Other printing problems There is considera- ble delay between the print start i n- struction and actu- al printing. Processing time depends on data volume. High volume data, such as graphics- heavy docu- ments, takes longer to process.
Troubleshooting When Using the Printer Function 56 4 If the problem cann ot be solved, cont act your sales or service representa tive. Duplex prin ting is malfunctioning. Duplex print- ing cannot be done with a tray for which [ Off ] has been speci- fied as Paper Type on the Sys- tem Settings menu.
57 5. Troubleshooting When Using the Scanner Function This chapter describes likely causes of and possible solutions for scanner func- tion problems. When us ing the DDST Unit , see “Troubleshoot ing When Using the DDST Unit”. When Scanning Is Not Done As Expected This section describes causes and remedies when scan results are not as expected.
Troubleshooting When Using the Scanner Function 58 5 When You Cannot Send Scanned Files The following sections describe likely ca uses of and solutions for network deliv- ery and e-mail sending-related problems.
When You Cannot Send Scanned Files 59 5 Operations Are Not Possib le When Messages Appear This section describes likely causes of and possible solutions for messages that appear when the machine fail s to operate. Message Cause Solution Updating desti- nation list.
Troubleshooting When Using the Scanner Function 60 5 When a Message Is Displayed This section describes likely causes of and possible soluti on s for error messages that may appear on the machine's di splay panel and the Client Computer.
When a Message Is Displayed 61 5 Cannot detect original size Select scan size. You have loaded paper of a size not shown in Paper Size Settings with User Tools.
Troubleshooting When Using the Scanner Function 62 5 Dest. authenti- cation failed. Check settings and check Scanned File Status. The entered user name or pass- word was invalid. • Check that the user name and password are correct. • Check that the ID and pass- word for the destination fold- er are correct.
When a Message Is Displayed 63 5 Entered protec- tion code for dest. is incor- rect. Please re- enter. The correct protection code was not entered. Make sure the protection code is correct, and then enter it again. See “Registering a Protection Code”, General Settings Guide.
Troubleshooting When Using the Scanner Function 64 5 Reference p.6 “When You Have Problems Operating the Machine” Sending has failed. Press Job Information key to check the status. Sending has failed. Press the { Job Information } key to check the stat us.
When a Message Is Displayed 65 5 When a Message Is Displaye d on the Client Computer This section descr ibes likely caus es of an d possible solutions for the main error messages displayed on the client co mputer when using the TWAIN driver.
Troubleshooting When Using the Scanner Function 66 5 Scanner is not available. Check the scan- ner connection status. • The machine's main power switch is off. • The machine is not connected to the network correct ly. • Set the main power switch to “On”.
When a Message Is Displayed 67 5 Reference “Turning On t he Power”, About This Machi ne Cannot find "xxx" scanner used for the previous scan. "YYY" will be used instead. (XXX and YYY indicat e a scanner name.) • The main power switch of the previously used scanner is not set to “On”.
Troubleshooting When Using the Scanner Function 68 5.
69 6. Troubleshooting When Using the DDST Unit This chapter describes likely causes o f and possible solutions for printer and scanner function pr oblems when us ing machines with the DDST Uni t.
Troubleshooting When Using the DDST Unit 70 6 Windows XP Professional or Windows Server 2003 This section describes the procedure for Windows XP Professional and Win- dows Server 2003. A On the [ Start ] menu, click [ Printers and Faxes ] . B Click [ Add a printer ] .
The Printer Function 71 6 When a Message Is Displayed This section describes the principal mess ages that appear on the display panel. If a message not described here appears, act according to the message . Note ❒ Before turning the main power off, s ee “Turning On the Power” , About This Machine.
Troubleshooting When Using the DDST Unit 72 6 Alert messages This section describes the machine alert messages. Messages/Second messages C auses Solutions Duplex mode is in off position for Tray # The selected paper tray has not been config ured for du- plex printing.
The Printer Function 73 6 Reset Paper Tray correctly. The selected paper tray does not exist or is not set correctly. Set the paper tray correctly. D Toner is almost empty. Add toner. Toner is running out. Replace the toner cartridge soon to maintain print quality.
Troubleshooting When Using the DDST Unit 74 6 Printing the error log If files could not be printed due to printing errors, print the error log to identify the problem. A Press the { User Tools/Counter } key. B Select [ Printer Features ] using {U} or {T} , and then press the { OK } key.
The Printer Function 75 6 When You Cannot Print Use the following procedur es if printing does not start even after performing [ Print ] . If the printing does not start, co ntact your service representa tive. Problem C ause Solution Printing does not start.
Troubleshooting When Using the DDST Unit 76 6 ❖ When the machine is connected to the computer using the interface cable The following show s how to check the print po rt when the D ata In indicator does not light up or blink. Check if the print port setting is correct.
The Printer Function 77 6 Other Printing Problems This section describes likely causes of and possible solutions for problems that can occur when printi ng from a computer. ❖ When you cannot print clearly Problem C ause Solution The print on the entire page is faded.
Troubleshooting When Using the DDST Unit 78 6 ❖ When certain settings are re quired on the printer driver The image is too dark or too light. The paper is loaded reverse side up.
The Printer Function 79 6 Optional components con- nected to the machine ar e not recognized when using Win- dows 98/ Me/ 2000/ XP or Windows Server 2003. The option setup in printer properties is not configured when bidirectional transmis- sion is not enabled.
Troubleshooting When Using the DDST Unit 80 6 ❖ When paper is not fed properly Photo images are coarse. Som e applications print at lower resolution. Use the application's settings to specify a hi gher resolution. When using Windows 98/ Me/ 2000/ XP or Windows Server 2003, Auto Re- duce/Enlarge print does not come out as expect ed.
The Printer Function 81 6 ❖ Other printing problems If the problem cann ot be solved, cont act your sales or service representa tive. Misfeeds occur freque ntly. The copy paper is wrinkled or has been folded/creased. Use recommended paper. Use paper that has been stored in the recommended tempe ra- ture and humidi ty condition.
Troubleshooting When Using the DDST Unit 82 6 The Scanner Function When Scanning Is No t Done As Expected This section describes causes and remedies when scan results are not as expected. Problem C ause Solution The scanned image is dirty. The exposure glass, scanning glass, exposure glass cover, or ARDF is dirty.
The Scanner Function 83 6 When a Message Is Displayed This section describes likely causes of and possible soluti on s for error messages that may appear on the machine's di splay panel and the Client Computer.
Troubleshooting When Using the DDST Unit 84 6 Scanner is not available on the specified device. The TWAIN scan ner functi on cannot be used on this machine. Contact your service repre- sentative. Scanner is not available. Check the scanner connection status.
The Scanner Function 85 6 Reference “Turning On t he Power”, About This Machi ne Error has occurred in the scanner driv- er. An error has occurred in the driver. • Check whether the ne twork cable is connected correctly to the client computer. • Check whether the Ether- net board of the client computer is recognized correctly by Windows.
Troubleshooting When Using the DDST Unit 86 6.
87 7. Adding Paper, Toner and Staples This chapter describes troubleshooting proc edures that are applicable to all the machine's functions. Loading Paper This section descr ibes what to do w h en paper runs out and needs reloading. R CAUTION: Important ❒ Check the top of the stack is not higher than the limit mark inside the tray.
Adding Paper, Toner and Staples 88 7 Loading Paper into the Paper Trays This procedur e explains how t o load paper into the paper trays. A Make sure the paper tray is not in use. B Pull the paper tray out slowly until it stops. C While pinching the release leve r, slide the end fence outward.
Loading Paper 89 7 Orientation-Fixed Paper or Two-Sided Paper The following describes pape r with its orientation and printing surface specified (letterhead paper).
Adding Paper, Toner and Staples 90 7 ❖ Loaded paper orientation • For machine with copier function only A YP013S.
Loading Paper 91 7 •F o r M F P Note ❒ In [ System Settings ] , specify [ Letterhead ] for “Paper Type” of the paper tray you w a nt to us e. T h i s se tt in g i s o nl y a va i l a b le wh en th e p r i nt er /s c a n n er an d f a x units are installed.
Adding Paper, Toner and Staples 92 7 Changing the Paper Size This section describes how to change paper sizes. Note ❒ Be s ur e t o se le ct t he pap er siz e i n Pa pe r Si ze Se tti ng s wi th Use r To ol s. If y ou do not, misfeeds might occur. See “Tray Paper Settings” , General Settings Guide.
Changing the Paper Size 93 7 Changing the Paper Si ze in the Paper Tray Use the following procedur e when changing a paper size in the paper tray. A Make sure the paper tray is not in use. B Pull the paper tray out slowly until it stops. C Remove any remaining copy paper.
Adding Paper, Toner and Staples 94 7 G Square the paper and place it in the tray. Do not stack pap er over the limit mark . H While pressing the release lever, push in the side and end fences until they are flush against the paper's edges. I Press down the lock button.
Changing the Paper Size 95 7 Selecting the paper si ze with user tools This procedure explains how to change to a paper size selected with User Tools. A Press the { User Tools/Counter } key. B Select [ System Settings ] using {U} or {T} , and then press the { OK } key.
Adding Paper, Toner and Staples 96 7 F Press the { User Tools/Counter } key. G Load the paper, and then gently pus h the paper tray in until it stops. H Check the paper size on the display panel. Note ❒ For details about the types of paper th at can be loaded in the paper tray, see “Tray Paper Settings”, General Settings Guide.
Adding Toner 97 7 Adding Toner This section descr ibes a dding and storing toner. R WARNING: R CAUTION: R CAUTION: R CAUTION: R CAUTION: R CAUTION: R CAUTION: Important ❒ Fault may occur if you use toner other than th e recommended type. ❒ When adding toner, do not turn off the operat ion switch.
Adding Paper, Toner and Staples 98 7 Note ❒ You can make about 50 copies even after the D Add Toner indicator begins flashing, but replace toner soon to prevent poor copy quality. Replacing Toner This section describes how to replace the toner bottle.
Adding Toner 99 7 Note ❒ Do not remove the black cap before shak ing. ❒ Do not remove the inne r cap. Sending Fax Messages When Toner Has Run Out When the machine has run ou t of toner, the indicator on the display lights. Note that even if th ere is no toner le ft, you can still send fax docum ents.
Adding Paper, Toner and Staples 100 7 Adding Staples This section ex plains what to do when staples need replacing . R CAUTION: Important ❒ Stapling failures or jams may occur if you use a staple cartridge other than the recommended type. Finisher The following proce dure explains how to add staples to th e finisher.
Replacing the Transmission Stamp Cartridge 101 7 Replacing the Transmission Stamp Cartridge If the transmission stamp become s faint, replace the cartridge. Important ❒ This stamp cartridge is used for facsimile and scanner functions. ❒ Use the cartridge specified for this machine.
Adding Paper, Toner and Staples 102 7 D Insert the new stamp cartridge. Insert the cartridge until the metal parts are no longer visible. E Close the stamp cover. Hold down the centre part of the cover to make sure that it is closed completely. F Lower the ARDF.
103 8. Clearing Misfeeds This chapter describes what to do when paper or originals misfeed (become jammed inside the machine). Removing Jammed Paper R CAUTION: R CAUTION: Important ❒ When clearing misfeeds, do not turn o ff the operation switch. If you do, your copy settings are cleared.
Clearing Misfeeds 104 8 When A Is Displayed When B Is Displayed When C Is Displayed BAK008S ASB006S BAK007S.
Removing Jammed Paper 105 8 When P Is Displayed When Y Is Displayed ASB008S ASB010S.
Clearing Misfeeds 106 8 When Z Is Displayed When R Is Displayed (When Finisher Is Install ed) A YP015S BAK002S.
Removing Jammed Paper 107 8 When D Is Displayed (When Bridge Unit Is Installed) A Open the bridge unit covers. B Remove the misfed paper. BAK011S BAK012S.
Clearing Misfeeds 108 8 Removing Jammed Staples This section explains how to remove jammed staples. Important ❒ Curled paper may cause staples to jam. To avoid this, turn copy paper over in the tray. ❒ When the finisher is installed, after removing jammed staples, stapl es will not be ejected the first few times you try to use the stapler.
109 9. Remarks This chapter describes how to maintain and o perate the machine. Where to Put Your Machine This section provides precauti ons for installation, movement and disposal. Machine Environment Choose your machine' s location carefully. Environmental conditions grea tly affect its pe rformance.
Remarks 110 9 Environments to avoid • Locations exposed to dire ct sunlight or other sour ces of strong light (more than 1,500 lux). • Locations directly exposed to cool air from an air conditioner or heated air from a heat- er. (Sudden temperature c hanges can cause condensation to f orm inside the machine.
Where to Put Your Machine 111 9 Reference p.37 “Turning Off the Main Power / In the Event of Power Failure” “Turning Off the Main P ower”, About This Machine Power Connection The following describes power supply.
Remarks 112 9 Access to the Machine Place the machine near the power source , provi ding the clearance areas shown. 1. Rear: 5 cm (2") or more 2. Right: 25 cm (10") or more 3. Front: 75 cm (29.6") or more 4. Left: 15 cm (6") or more Note ❒ For the required space when options are inst alled, contact your service representative.
Maintaining Your Machine 113 9 Maintaining Your Machine I f t h e e x p o s u r e g l a s s , e x p o s u r e g l a s s c o v e r , o r A R D F b e l t i s d i r t y , c o p y c l a r i t y may be reduced. Clean these parts if they are dirty. R CAUTION: Important ❒ Do not use chemica l cleaners or orga ni c solvents, such as thinner or benzene.
Remarks 114 9 Cleaning the Exposure Glass Cover This section descr ibes how to clean the exposure glass cover. Clean 1. Cleaning the ARDF This section descr ibes how to clean the ARDF.
115 INDEX A Adding staples , 100 Adding toner , 97 Add Toner indicator , 3 Adjusting the display's con trast , 6 Alert messages , 43 , 72 ARDF , 1 ARDF belt is dirty , 113 Authenticati on failure.
116 AE AE D010-7626A P Panel tone , 4 Paper is not fed from selected tray , 49 , 77 Parts of image not copied , 14 Password not correct , 6 Power connection , 111 Power Failure Report , 37 Power suppl.
In accordance with IEC 60417, this machine uses the fol lowing symbols for the main power switch: a means POWER ON. b means POWER OFF. c means STAND BY.
Operating Instructions Troubleshooting Type for MP 2500/Aficio MP 2500/IS 2325 AE AE D010-7626A.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Ricoh IS 2325 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Ricoh IS 2325 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Ricoh IS 2325, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Ricoh IS 2325 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Ricoh IS 2325, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Ricoh IS 2325.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Ricoh IS 2325. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Ricoh IS 2325 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
