Manuel d'utilisation / d'entretien du produit TW144 du fabricant Rhino Mounts
Aller à la page of 196
©201 1 Alamo Group Inc. Published 01/1 1 Part NO. 00761232C OPERA T OR’S MANUAL RHINO ® 1020 S. Sangamon A ve. Gibson City , IL 60936 800-446-5158 Email: parts@servis-rhino.com This Operator' s Manual is an integral p art of the safe operation of this machine and must be maintaine d with the un it at all times.
T o the Owner/Operator/Dealer This Operator's Manual is an integral p art of the safe operation of this machine and must be maint ained with the implement at a ll times. A M anual canist er is provide d on the implement where this manu al can be properly stored.
In order to r educe accidents and enhance the safe o peration of mowers, Alamo Group Ag Division, in cooperation with other industr y manufacturers has develope d the AEM/FEMA Industrial and Ag ricultural Mower Safety Practices video an d guide book.
Alamo Group Ag. Division will prov ide one (1) AEM Mower Safety Practices Vi deo Please Send Me: VHS Format – AEM/FE MA Mower Operator Safety V ideo DVD Format – AEM/FEMA Mower Operator Safety V i.
DEALER to CUST OMER Pre-Delivery/ Operation Instructions Dealer should inform the Purcha ser of this product of W arranty term s, provisions , and proc edures that are applicable.
.
T ABLE OF CONTENTS SAFETY SECTION ......... ................................. .......................................................... ........... 1- 1 GENERAL SAFETY INSTRUCTIONS AN D PRACTICES ............ ............. ............. .............
OPERATOR REQUI REMENTS .......... ............. ............. ................ ............. ............. ................ ............ ................ 4-3 TRACTOR REQUIREMENTS ....... ............. ................ ............. ............. .....
GEARBOX ....... ................ ............. ............. ................ ............. ............. ................ ............. ................ ............. ..... 5-6 TAIL WHEEL ASSEMBLY ..... ................. .............................
.
Safety Section 1-1 © 201 1 Alamo Group Inc. SAFETY SECTION.
SAFETY TW144 01/11 Safety Section 1-2 © 201 1 Alamo Group Inc. SAFETY GENERAL SAFETY INSTRU CTIONS AND PRACTICES A careful oper ator is the best operator .
SAFETY TW144 01/11 Sa fety Section 1-3 © 201 1 A lamo Group Inc. SAFETY OPERA TOR SAFETY TO A VOID SERIOUS IN JUR Y OR D EA TH DO THE FOLLOWING: • READ, UNDERST AND and FOLLOW Operator's Manual instructions, W arnings and Safety Messages.
SAFETY TW144 01/11 Safety Section 1-4 © 201 1 Alamo Group Inc. SAFETY CONNECTION OR DISCONNE CTING IMPLEMENT SAFETY TO A VOID SERIOUS INJURY OR DEA TH FROM BEING CRUSHED BY TRACTOR OR IMPLEMENT : WHE.
SAFETY TW144 01/11 Sa fety Section 1-5 © 201 1 A lamo Group Inc. SAFETY CRUSHING HAZARDS TO A VOID SER IOUS INJURY OR DEA TH FROM F ALLING OF F TRACTOR, EQUIPMENT RUN OVER, ROLLOVER AND CRUSHING BY F ALLING WING OR IMPLEMENT : • USE ROPS and SEA T BEL T equipped tractors for mowing operations.
SAFETY TW144 01/11 Safety Section 1-6 © 201 1 Alamo Group Inc. SAFETY THROWN OBJECTS HAZARDS ROT ARY MOWERS CAN THROW OBJECTS 300 FEET OR MORE UNDER ADVERSE CONDITIONS.
SAFETY TW144 01/11 Sa fety Section 1-7 © 201 1 A lamo Group Inc. SAFETY THROWN OBJECTS HA ZARDS (CONTINUED) MOWER OPERA TION: • DO NOT exceed mower' s rated Cutting Capacity or cut non- vegetative material. • USE ENCLOSED TRACTOR CABS when two or more mowers ar e operating in mowing area.
SAFETY TW144 01/11 Safety Section 1-8 © 201 1 Alamo Group Inc. SAFETY RUN OVER HAZARDS TO A VOID SERIOUS INJUR Y OR DEA TH FROM F ALLIN G OFF TRACTOR OR EQUIPMENT RUN OVER: • USE ROPS and SEA T BEL T equipped tractors for mowing operations. • KEEP ROPS locked in UP position.
SAFETY TW144 01/11 Sa fety Section 1-9 © 201 1 A lamo Group Inc. SAFETY PTO ENT ANGLEMENT HAZARDS KEEP A W A Y FROM ROT A TING DRIVELINES AND ELEMENTS TO A VOID SERIOUS INJUR Y OR DEA TH: S T AY A W AY and KEEP hands, feet and b ody AW A Y from rot ating blades, drivelines and parts un til all moving element s have stopped.
SAFETY TW144 01/11 Safety Sectio n 1-10 © 201 1 Alamo Group Inc. SAFETY MOWER BLADE CONT ACT HAZARDS KEEP A W A Y FROM ROT A TING BLADES TO A VOID SERIOUS INJUR Y OR DEA TH FROM BLADE CONT ACT : • S T AY AW AY and KEEP HANDS, FEET and BODY A W A Y from rotating blades, drivelines and parts until all moving elements have stopped.
SAFETY TW144 01/11 Safe ty Section 1-11 © 201 1 A lamo Group Inc. SAFETY HIGH PRESSURE OIL LEAK HAZARDS TO A VOID SERIOUS INJUR Y OR DEA TH FROM HIGH PRESSURE HYDRAULIC OIL LEAKS PENERA TING SKIN: • DO NOT OPERA TE equipment with oi l or fuel leaks.
SAFETY TW144 01/11 Safety Sectio n 1-12 © 201 1 Alamo Group Inc. SAFETY ELECTRICAL & FIRE HAZARDS TO A VOID SERIOUS INJURY OR DEA TH FROM ELECTRICAL CONT ACT WHEN WORKING AROUND ELECTRICAL POWER .
SAFETY TW144 01/11 Safe ty Section 1-13 © 201 1 A lamo Group Inc. SAFETY TRANSPORTING HAZARDS TO A VOID SERIOUS INJUR Y AND DEA TH WHEN TO WING OR TRANSPORTING EQUIPMENT : • KEEP transport speed BELOW 20 mph to maintain control of equipment. • REDUCE SPEED on inclines, on turns and in poor towing conditions.
SAFETY TW144 01/11 Safety Sectio n 1-14 © 201 1 Alamo Group Inc. SAFETY HAZARDS WITH MAINTENANCE OF IMPLEMENT A VOID SE RIOUS INJURY OR DEA TH FROM COMPONENT FAILURE BY KEEPING IMPLEMENT IN GOOD OPERA TING CONDITION IN PERFORMI NG PROPER SERVICE, REP AIRS AND MAINTENANCE.
SAFETY TW144 01/11 Safe ty Section 1-15 © 201 1 A lamo Group Inc. SAFETY PA R T S I N F O R M AT I O N PA R T S I N F O R M AT I O N Rhino mowers use bala nced and matched system compone nts for blade car riers, blades, cuttershaft s, knives, knife hangers, roll ers, drivetrain component s, and be arings.
SAFETY TW144 01/11 Safety Sectio n 1-16 © 201 1 Alamo Group Inc. SAFETY Decal Location - Lif t T ype NOTE: Rhino supplies safety deca ls on this product to pr omote safe operat ion. Damage to the decals may occur while in s hipping, use, or recondition ing.
SAFETY TW144 01/11 Safe ty Section 1-17 © 201 1 A lamo Group Inc. SAFETY ITEM P ART NO. QTY LEVEL DESCRIPTION 1. D389 1 DECAL Multi Hazard 2. D388 1 DECAL Driveline Hazards 3. 00756004 3 DANGER D/L Shield Missing. Do Not Operate 4. 00756005 ( 2) DANGER Rot ating D/L Entang lement 5.
SAFETY TW144 01/11 Safety Sectio n 1-18 © 201 1 Alamo Group Inc. SAFETY Decal Location - Pull T ype NOTE: Rhino supplies safety decals on this product to promote safe operation . Damage to the de cals may occur while in s hipping, use, or recondition ing.
SAFETY TW144 01/11 Safe ty Section 1-19 © 201 1 A lamo Group Inc. SAFETY ITEM P ART NO. QTY LEVEL DESCRIPTION 1. D389 1 DECAL Multi Hazard 2. D390 1 DECAL Pull T ype Unit Hazards 3. D388 1 DECAL Driveline Hazards 4. 00756004 3 DANGER D/L Shield Missing, Do Not Operate 5.
SAFETY TW144 01/11 Safety Sectio n 1-20 © 201 1 Alamo Group Inc. SAFETY Decal Description.
SAFETY TW144 01/11 Safe ty Section 1-21 © 201 1 A lamo Group Inc. SAFETY.
SAFETY TW144 01/11 Safety Sectio n 1-22 © 201 1 Alamo Group Inc. SAFETY.
SAFETY TW144 01/11 Safe ty Section 1-23 © 201 1 A lamo Group Inc. SAFETY.
SAFETY TW144 01/11 Safety Sectio n 1-24 © 201 1 Alamo Group Inc. SAFETY.
SAFETY TW144 01/11 Safe ty Section 1-25 © 201 1 A lamo Group Inc. SAFETY.
SAFETY TW144 01/11 Safety Sectio n 1-26 © 201 1 Alamo Group Inc. SAFETY.
SAFETY TW144 01/11 Safe ty Section 1-27 © 201 1 A lamo Group Inc. SAFETY.
SAFETY TW144 01/11 Safety Sectio n 1-28 © 201 1 Alamo Group Inc. SAFETY.
SAFETY TW144 01/11 Safe ty Section 1-29 © 201 1 A lamo Group Inc. SAFETY Federal Laws and Re gulations This section is intended to explain in broad terms the conc ept and effect of federal laws and regulations conce rning employer and employee eq uipment operators.
.
.
2 Contents Acknowledgment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Forewor d . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Safety Alerts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3 Safety Aler ts Symbol This Safety Alert Symbol means: “A TTENTION! ST A Y ALERT! YOUR SAFETY IS INVOL VED!” The Safety Alert Symbol identi es important safety messages on equipment, safety signs, in manuals or elsewhere. When you see this symbol, be alert to the possibility of death or personal injury .
4 Industrial/Agricultural Mower T ypes Mowers are used for pastur e clipping, crop r esidue shredding, heavy brush cutting, waterways, right-of- ways, roadside or highway mowing. Also, these mowers are used for cutting grass and other gr owth in public areas such as parks and cemeteries.
5 Follow A Safety Program Protect Y ourself W ear personal pr otective clothing and Personal Protective Equipment (PPE) issued to you or called for by job conditions.
6 Follow A Safety Program Avoid Injury Fr om Raised Equipment Avoid possible crushing injury fr om falling mower or other raised equipment. Before working near or under raised mower or equipment parts: — Securely support or block up raised mower or equipment parts according to the operator’ s manual.
7 Follow A Safety Program Be Alert! Know where to get assistance. Know how to use a rst aid kit and re extinguisher/ r e suppression system.
8 Follow A Safety Program Some Rules Y ou Must W ork By (continued) — Only quali ed and authorized individuals may operate this equipment. — Never allow children to play on, ride on or operate the equipment. Children ar e not quali ed to operate this equipment.
9 Prepare For Safe Operation Check The Mower And T ractor Equipment Before beginning your work day inspect the machine and have all systems in good operational condition. WARNING! Pr event possible crushing injury from falling equipment. Hydraulic system or part failure could cause unsupported equipment to fall.
10 Prepare For Safe Operation Know The W ork Area Before you operate the mower thor oughly inspect the work area. W alk ar ound the area and inspect the surfaces you will travel on when using the mower .
11 Prepare For Safe Operation T ractor And Mower Contr ols Safety T est Start the tractor following the speci c pr ocedures in the manufacturer’ s operator’ s manual. These procedur es normally include: — Fasten and adjust seat belt on your ROPS-equipped tractor .
12 Prepare For Safe Operation Hitching Mower T o T ractor Three-point hitch-mounted mowers: — Refer to mower and tractor manufacturers’ manuals. — Place tractor’ s hydraulic power lift (rockshaft) selector lever in down position to avoid unexpected movement.
13 Star t Safely Make The Right Start Mow only in daylight or good arti cial light conditions. Avoid serious injury or death fr om mower -thr own objects or blade contact: — Keep chain shields, exible or solid de ector shields or dischar ge chutes in place and in good repair .
14 Operate Safely Mower -Thrown Objects (continued) Disc Mowers — When using a disc mower it is important to know the area to be mowed. If the operator has mowed the eld befor e and is familiar .
15 Operate Safely Under Mount Mower Safety Practices When mowing with an under mount mower: — Keep removable dischar ge chute in place and over dischar ge opening. — Never stand on a mower housing when the tractor engine is operating. — Distribute grass clippings with discharge chute facing mowed area.
16 Operate Safely Wing And Side Mount Mowers Safety Practices Raised wing positions reduce shielding pr otection and increases the thr own object and blade contact hazard risks.
17 Uneven T errain Mowing Safety Practices (continued) — Use extreme car e to maintain control over the equipment when operating in these conditions. — Increase tractor stability by adding wheel weights, ballast and increasing wheel spacing to maximum.
18 Parking Safety Practices — Use designated or out-of-traf c areas. — Use rm level ground locations. — Set parking brake. — Lower raised equipment to ground. Shut down the mower and tractor using proper equipment shut down practice before dismounting tractor .
19 Shut Down Safely Dismounting Properly — Never dismount from moving equipment. — Never jump from any machines. — Dismount carefully . — Check for slippery steps. — Keep feet and hands away from contr ols. — Use handholds and steps during dismount.
20 Per for m Maintenance Safely Prepar e Y ourself W ear personal pr otective clothing and Personal Protective Equipment (PPE) issued to you or called for by job conditions.
21 Per for m Maintenance Safely Prepar e The Machine Stored ener gy sources (electrical, mechanical, hydraulic, pneumatic, chemical, thermal, etc.) must be controlled or reduced to a practical minimum befor e performing any maintenance, repair or service pr ocedures.
22 Per for m Maintenance Safely Per for m Maintenance Safely Use Proper V entilation If it is necessary to run an engine in an enclosed area, remove the exhaust fumes fr om the area with an exhaust pipe extension. If you do not have an exhaust pipe extension, make sure you open the doors and get outside air into the area.
23 Hydraulic System Hazards The hydraulic system is under pressur e whenever the engine is operating and may hold pressur e even after the engine is shut off. Cycle all hydraulic contr ols including the auxiliary hydraulic control after the engine is shut down.
24 Avoid Explosion WARNING! A void possible serious injury from explosion. Lead-acid batteries produce extr emely explosive gases especially when being char ged. Keep arcs, sparks, fl ames and lighted tobacco away . — Do not smoke near batteries. — Keep arcs, sparks and open ames away from batteries.
25 Tire And Wheel Maintenance (continued) WARNING! The types of wheels and tir es usually found on this equipment requir e special care when servicing to prevent death or serious injury . Do not in ate the tir es above the recommended pressur e. Be sure to r eplace tire ballast if equipped.
26 Per for m Maintenance Safely Mower Blade Maintenance (continued) — How are mower blades made? Mower blades are made of high str ength alloy spring steel.
.
2 Este manual de seguridad está destinado a señalar algunas de las situaciones de seguridad básicas que pueden sur gir durante la operación y el mantenimiento normales de la máquina y a instruirlo en prácticas de seguridad para manejar estas condiciones.
3 Aler tas de seguridad Símbolo Este símbolo de alerta de seguridad signi ca: “¡A TENCIÓN! ¡MANTÉNGASE ALERT A! ¡SU SEGURIDAD EST Á EN RIESGO!” El símbolo de alerta de seguridad identi ca mensajes de seguridad importantes sobre el equipo, sobr e letrer os de seguridad, en manuales u otros lugar es.
4 Tipos de cortadora de césped industrial/para agricultura Las cortadoras de césped se usan para recortar pasturas, desmenuzar residuos de cultivos, cortar arbustos, r ealizar desbroce pesado, cortar la hierba en vías de agua, derechos de paso, costados de caminos o autopistas.
5 Cumplimiento del programa de seguridad Protéjase a sí mismo Use la ropa de pr otección personal y los equipos de protección personal (PPE) que se le pr oporcionen o que requieran las condiciones del trabajo. SIEMPRE debe usar gafas de seguridad con escudos laterales.
6 Cumplimiento del programa de seguridad Evite las lesiones provocadas por equipos elevados Evite posibles lesiones de aplastamiento por caídas de la cortadora u otros equipos elevados.
7 Cumplimiento del programa de seguridad ¡Manténgase alerta! Sepa dónde obtener asistencia. Sepa cómo usar un equipo de primeros auxilios y un extintor de incendios/ sistema de supresión de fuego. ¡Manténgase informado! Aproveche los pr ogramas de capacitación que se ofrecen.
8 Cumplimiento del programa de seguridad Algunas reglas que debe cumplir al trabajar (continuación) — Únicamente personas cuali cadas y autorizadas pueden manejar estos equipos. — Nunca permita que los niños jueguen en los equipos, viajen en ellos o los hagan funcionar .
9 Preparación para una operación segura Revise los equipos de la cortadora de césped y el tractor Antes de comenzar la jornada de trabajo, inspeccione la máquina y asegúrese de que todos los sistemas estén en buenas condiciones operacionales. ¡ADVERTENCIA! Evite posibles lesiones por aplastamiento producidas por equipos que caen.
10 Preparación para una operación segura Familiarícese con la zona de trabajo Antes de hacer funcionar la cortadora de césped, inspeccione cuidadosamente la zona de trabajo. Recorra a pie alrededor de la zona e inspeccione las super cies sobre las cuales se desplazará cuando utilice la cortadora.
11 Preparación para una operación segura Prueba de seguridad de los controles del tractor y de la cortadora de césped Arranque el tractor siguiendo los procedimientos especí cos del manual del operador del fabricante.
12 Preparación para una operación segura Enganche de la cortadora de césped al tractor Cortadoras montadas en enganche de tres puntos: — Consulte los manuales de los fabricantes de la cortadora y del tractor .
13 Arranque con seguridad Cómo realizar un arranque corr ecto Corte la hierba únicamente con luz diurna o en condiciones de buena luz arti cial. Evite lesiones graves o muerte producidas por obje.
14 Operación con seguridad Objetos arrojados por la cortadora de césped (continuación) Cortadoras de disco — Cuando se usa una cortadora de disco, es importante conocer la zona donde se va a cortar .
15 Operación con seguridad Prácticas de seguridad para la cortadora de césped de montaje inferior Cuando se traslada con una cortadora de césped de montaje inferior: — Mantenga la rampa de descarga extraíble en su lugar y por encima de la abertura de descar ga.
16 Operación con seguridad Prácticas de seguridad para cortadoras de césped con laterales y montaje lateral Las posiciones elevadas de los laterales reducen la protección de los escudos y aumentan los riesgos de objetos arrojados y contacto con las hojas.
17 Prácticas de seguridad para trabajos de corte en terrenos despar ejos (continuación) — Use extremo cuidado para mantener el contr ol de los equipos cuando trabaja en estas condiciones. — Aumente la estabilidad del tractor agregando pesos o lastre en las ruedas y aumentando al máximo la separación entre las ruedas.
18 Prácticas de seguridad para el estacionamiento — Use las zonas designadas o alejadas del tránsito. — Use lugares con suelo rme y nivelado. — Aplique el freno de estacionamiento. — Descienda el equipo de la cortadora de césped hasta el suelo.
19 Apagado con seguridad Descenso correcto — Nunca descienda de equipos en movimiento. — Nunca baje de una máquina saltando. — Descienda con cuidado. — V eri que que no haya peldaños resbaladizos. — Mantenga los pies y las manos lejos de los controles.
20 Realización de mantenimiento con seguridad Preparación personal Use la ropa de pr otección personal y los equipos de protección personal (PPE) que se le pr oporcionen o que requieran las condiciones del trabajo. SIEMPRE debe usar gafas de seguridad con escudos laterales.
21 Realización de mantenimiento con seguridad Preparación de la máquina Deben controlarse o r educirse las fuentes de energía almacenada (eléctricas, mecánicas, hidráulicas, neumáticas, químicas, térmicas, etc.) al mínimo practicable antes de realizar cualquier pr ocedimiento de mantenimiento, reparación o servicio.
22 Realización de mantenimiento con seguridad Use ventilación adecuada Si es necesario hacer funcionar un motor en una zona cerrada, elimine del área las emanaciones de escape con una extensión del caño de escape. Si no tiene esa extensión, asegúrese de abrir las puertas y dejar entrar aire del exterior .
23 Riesgos del sistema hidráulico El sistema hidráulico se encuentra bajo presión siempr e que el motor está funcionando; puede conservar presión incluso después de apagar el motor . Haga funcionar todos los controles hidráulicos incluyendo el contr ol hidráulico auxiliar después de que el motor esté apagado.
24 Evite explosiones ¡ADVERTENCIA! Evite posibles lesiones graves por explosiones. Las baterías de plomo-ácido producen gases sumamente explosivos, especialmente durante la car ga. Mantenga alejados los arcos, las chispas, las llamas y el tabaco encendido.
25 Mantenimiento de neumáticos y ruedas (continuación) ¡ADVERTENCIA! Los tipos de ruedas y neumáticos que generalmente se encuentran en estos equipos requier en cuidados especiales al realizar servicios para evitar lesiones graves o la muerte. No in e los neumáticos por encima de la pr esión recomendada.
26 Realización de mantenimiento con seguridad Mantenimiento de las hojas de la cortadora (continuación) — ¿Cómo están hechas las hojas de la cortadora de césped? Están hechas acero para r esortes de aleación de alta resistencia.
Introduction Section 2-1 © 201 1 Alamo Group Inc. INTRODUCTION SECTION.
INTRODUCTION TW144 01/11 Introduction Section 2-2 © 201 1 Alamo Group Inc. INTRODUCTION We ar e pleased to have you as a Rhino customer . Y our Rotary Cutter has been carefully designed with car e and built with quality mater ials by skilled workers to give maximum service with minimum down time.
INTRODUCTION TW144 01/11 Introduction Section 2-3 © 201 1 Alamo Group Inc. INTRODUCTION Equipment Specifications Cutting Width 144” 540 PTO T ransport Width 151” Blade Tip Speed Overall Width 151.
INTRODUCTION TW144 01/11 Introduction Section 2-4 © 201 1 Alamo Group Inc. INTRODUCTION KEY OPERA T ION POINTS • Cutting performance an d distribution are best when cu tter is level from side to side and front to rear . • In extra heavy material, rear chains will allow better discharge and better distri bution than so lid rear bands.
INTRODUCTION TW144 01/11 Introduction Section 2-5 © 201 1 Alamo Group Inc. INTRODUCTION RHINO LIMITED W ARRANTY 1. LIMITED W ARRANTIES 1.01. Rhino warrants for o ne year fro m the purchas e date to t.
.
Assembly Section 3-1 © 201 1 Alamo Group Inc. ASSEMBL Y SECTION.
ASSEMBLY TW144 01/11 Assembly Section 3- 2 © 201 1 Alamo Group Inc. ASSEMBL Y DEALER SET -UP INSTRUCTIONS The mower as received from the factory is partia lly assembled and requires minimum time to complete assembly an d is ready f or sale. This mower is shipped vertically wit h shipping bracket s.
ASSEMBLY TW144 01/11 Assembly Section 3- 3 © 201 1 Alamo Group Inc. ASSEMBL Y A-FRAME ASSEMBL Y - LIFT TYPE (CONT’D) ITEM QTY DESCRIPTION 1. 1 A-Frame - RH 2. 1 A-Frame - LH 3. 2 Brace 4. 2 Brace 5. 2 Bushing 1-1/8OD x 9/16 Lg 6. 6 Bushing 1OD x 2 1/8 Lg 7.
ASSEMBLY TW144 01/11 Assembly Section 3- 4 © 201 1 Alamo Group Inc. ASSEMBL Y T AIL WHEEL ASSEMBL Y - LIFT TYPE . 1. Attach Beam Support Weldment s (2) to the Main Frame Asse mbly with 1/2 x 1-1/ 2 Bolts (6) & Locknuts(7).
ASSEMBLY TW144 01/11 Assembly Section 3- 5 © 201 1 Alamo Group Inc. ASSEMBL Y Attach the Axle Arms to the Main Axle maintaining Dim. A approximately equal to Dim. B when clamp bolts are tig hten. However , these Dim. may vary slightly if needed to help level the Mower Deck from side to side.
ASSEMBLY TW144 01/11 Assembly Section 3- 6 © 201 1 Alamo Group Inc. ASSEMBL Y CUTTER LEVELING Often when the unit is first assemb led and placed on a hori zo ntal surface, the cutte r is not level front to rear or side to side.
ASSEMBLY TW144 01/11 Assembly Section 3- 7 © 201 1 Alamo Group Inc. ASSEMBL Y HYDRAULIC OR MANUAL LIFT Attach th e S pring Assembly optio n (FIGURE Asm-R-0186) to the lug on the cutter deck behind the Center Gearbox. Retain using 3/4 x 3 capscrew an d locknut.
ASSEMBLY TW144 01/11 Assembly Section 3- 8 © 201 1 Alamo Group Inc. ASSEMBL Y DRIVELINE A TT ACHMENT Before starting assem bly , m ake certain that all paint, dir t, and greas e are remove d from gear box shaft (1). T o ease assembly apply a light coat of grease to splines and assemble.
ASSEMBLY TW144 01/11 Assembly Section 3- 9 © 201 1 Alamo Group Inc. ASSEMBL Y JACKSHAFT BEARING SUPPORT ASSEMBL Y Attach the Jackshaf t bearing support bracket (1) to the tongue. Loosely att ach bearing support by using pivot bolt (3) with bushing (6).
ASSEMBLY TW144 01/11 Assembly Section 3-10 © 201 1 Alamo Group Inc. ASSEMBL Y DRIVELINE CLAMP CONE YOKE OPERA TING INSTRUCTIONS Loosen the yoke clamp cone with a 1 1/16” (17mm) wrench and remove the cone from yoke. Slide yoke onto the shaf t and align hole for clamping cone with annular groove of gearbox shaf t.
ASSEMBLY TW144 01/11 Assembly Section 3-11 © 201 1 Alamo Group Inc. ASSEMBL Y Rear Deflector Attach the rear ru bber Deflectors (1) to the Cutter with br a cket S traps (2), 1/2” x 1- 1/4” Bolts (3 ), Flatwashers (4) and Lo cknuts (5).
ASSEMBLY TW144 01/11 Assembly Section 3-12 © 201 1 Alamo Group Inc. ASSEMBL Y Rear Chain Guards Attach the right and left Chain Guard assemblies (1) to the Cutter with 1/2" x 1-1/4" Bolt s (2), Flatwasher s (3), and Locknuts( 4).
Operation Sec tion 4-1 © 2011 Alamo Group Inc. OPERA TION SECTION.
OPERATION TW144 01/11 Operation Section 4-2 © 201 1 Alamo Group In c. OPERA TION RHINO TW144 MEDIUM-DUTY ROT AR Y MOWER OPERA T ION INSTRUCTIONS Rhino rotary mowers are manufactur ed with quality material by skilled wo rkers.
OPERATION TW144 01/11 Operation Section 4-3 © 2011 Alamo Group Inc. OPERA TION 1. OPERA TOR REQUIREMENTS Safe operation of the unit is the responsibility of a qualifi ed operator .
OPERATION TW144 01/11 Operation Section 4-4 © 201 1 Alamo Group In c. OPERA TION 2. TRACT OR REQUIREMENTS The tractor used to oper ate the mower must have the power cap acity to lift, pull, an d operate the Power T ake Off (PT O) at the mower’s rated speed while tr aveling at a ground speed between 2 and 5 MPH.
OPERATION TW144 01/11 Operation Section 4-5 © 2011 Alamo Group Inc. OPERA TION 2.3 T ractor Horsepower The power req uired to opera te a mower is de termined b y the tractor PTO hors epower .
OPERATION TW144 01/11 Operation Section 4-6 © 201 1 Alamo Group In c. OPERA TION 2.5 Drawbar-Pull T ype Mower For pull type mowers ( 540 and 1000 RPM) equipped with an equal-angle drive line, the tra.
OPERATION TW144 01/11 Operation Section 4-7 © 2011 Alamo Group Inc. OPERA TION Do not connect the PT O driveline to the tractor or operate the implement unless the implement is securely connecte d to the tractor . 2.7 Power T ake Off (PTO) Depending on the unit, th e mower is designed to oper at e at a PTO speed of 540 or 1000 RPM.
OPERATION TW144 01/11 Operation Section 4-8 © 201 1 Alamo Group In c. OPERA TION 3. GETTING ON AND OFF THE TRACT OR Before getting onto the tr actor , the operator must read and co mpletely understand the implement and tractor operator manuals.
OPERATION TW144 01/11 Operation Section 4-9 © 2011 Alamo Group Inc. OPERA TION BEFORE leaving the tracto r seat lower the implement, set the p arking brake and/or set th e tractor transmission in parking gear , disengage the PTO, stop th e engine, remove the key , and wait for all moving p arts to stop.
OPERATION TW144 01/11 O peration Section 4-10 © 201 1 Alamo Group In c. OPERA TION 5.1 Connecting the Mower-Lif t T ype and Semi-Mount T ype 1. Make sure the tractor is equip ped with the correct PTO sha ft. Change shaf ts if needed. 2. Shorten or remove the tractor drawbar to avoid interference when raising and lowering the mower .
OPERATION TW144 01/11 O peration Section 4-11 © 2011 Alamo Group Inc. OPERA TION 5.2 3-Point Quick Hitch Our 3-Point Quick Hitch is d esigned to connect to a Quick-Attach Couple r making mounting and dismounting your mower e asier .
OPERATION TW144 01/11 O peration Section 4-12 © 201 1 Alamo Group In c. OPERA TION 5.5 Connecting the Mower-Pull T ype 1. Make sure the tracto r is equipped with the correct PT O shaft and the drawb ar is extended 14” from the end o f the PTO shaft to the hitch point.
OPERATION TW144 01/11 O peration Section 4-13 © 2011 Alamo Group Inc. OPERA TION 7. If using a hydraulic cylinder , connect hydrau lic hose ends into tra ctor hydr aulic ports.
OPERATION TW144 01/11 O peration Section 4-14 © 201 1 Alamo Group In c. OPERA TION 5. Level the mower si de to side b y manipul ating one lower lift arm length. On most tractors, at least one of the lif t arms is designed to allow for manipulation of it s length.
OPERATION TW144 01/11 O peration Section 4-15 © 2011 Alamo Group Inc. OPERA TION 4. If the mower is attached to a 3-point hitch drawbar , adjust any tractor equipped lower link check chain s, guide block s, or sway blocks to prevent the hitch and mower from swaying from side to side.
OPERATION TW144 01/11 O peration Section 4-16 © 201 1 Alamo Group In c. OPERA TION 7.1 Driveline Length Check When fitting the mower to the tractor , the telescoping drive line must be inspected to e.
OPERATION TW144 01/11 O peration Section 4-17 © 2011 Alamo Group Inc. OPERA TION “Bottoming Out” Check Procedure • Disconnect driveline from the tracto r and slide the profiles together u ntil fully comp ressed. • Place a mark on the inner shield 1/8” from the end of the outer shield.
OPERATION TW144 01/11 O peration Section 4-18 © 201 1 Alamo Group In c. OPERA TION 7.2 Constant V elocity (CV) Driveline Mowers are equip ped with a Constan t V elocity (CV) driveline, th e maximum turning angle between the tractor and mower must be determined to ensure the joint angle does not over-extend which can cause CV jo int damage.
OPERATION TW144 01/11 O peration Section 4-19 © 2011 Alamo Group Inc. OPERA TION 8. PRE-OPERA TION INSPECTION AND SERVICE Before each use, a pre- operation inspection and service of the implement and tractor must be perform ed.
OPERATION TW144 01/11 O peration Section 4-20 © 201 1 Alamo Group In c. OPERA TION 8.1 T ractor Pre-Operation Inspection/Service Refer to the tr actor operator ’s manua l to ensure a complete pre-operation inspection and scheduled service is performed accordi ng to the manufacturers recommenda tions.
OPERATION TW144 01/11 O peration Section 4-21 © 2011 Alamo Group Inc. OPERA TION 8.2 Mower Pre-Operati on Inspection/Service Before each mowe r use, a complete inspection and serv ice is required to ensure the mower is in a good a nd safe working con dition.
OPERATION TW144 01/11 O peration Section 4-22 © 201 1 Alamo Group In c. OPERA TION All Safety Shields, Guards and Safety devices including (but not limited to) - the Deflecto rs, Chain Guards, S teel Guards, Gear box Shields, PTO integral shields, an d Retractable Door Shields should be used and maint ained in good working co ndition.
OPERATION TW144 01/11 O peration Section 4-23 © 2011 Alamo Group Inc. OPERA TION • Inspect the gearbox oil leve l. A low oil level is a warning sign that the ge arbox may be cracked or its se al is damaged and needs replacement. • Ensure the gearbox vent is in place an d free from clogs.
OPERATION TW144 01/11 O peration Section 4-24 © 201 1 Alamo Group In c. OPERA TION 8.3 Cutting Component Inspection Inspect blade p an and blade assembly for the following: OPS-U-0031.
OPERATION TW144 01/11 O peration Section 4-25 © 2011 Alamo Group Inc. OPERA TION Operating the mower wit h loose blade hardware will damage the blade holder or blades and can result in blade breakage or bl ade fastener failure. Broken blades o r bolts can be thrown out from under the mower for distances up to 300 feet.
OPERATION TW144 01/11 O peration Section 4-26 © 201 1 Alamo Group In c. OPERA TION 8.4 Blade Bolt Inspection Inspect Blade Bolt Head da ily for wear as followed: Inspect the Blade Bolt Heads d aily for abn ormal wear .
OPERATION TW144 01/11 O peration Section 4-27 © 2011 Alamo Group Inc. OPERA TION Rotary Mower PRE-OPERA T ION Inspection Mower ID#________________ Make ____________________ Date: ________________ Shi.
OPERATION TW144 01/11 O peration Section 4-28 © 201 1 Alamo Group In c. OPERA TION T r actor PRE-OPERA T ION Inspection T ractor ID#________________ Make ____________________ Date: ________________ S.
OPERATION TW144 01/11 O peration Section 4-29 © 2011 Alamo Group Inc. OPERA TION 9. DRIVING THE TRACTOR AND IMPLEMENT Safe tractor transport requ ires the operator possess a tho rough knowledge of the mode l being operated and precautions to t ake while driving with an att ached implem ent.
OPERATION TW144 01/11 O peration Section 4-30 © 201 1 Alamo Group In c. OPERA TION 9.1 St arting the T ractor The procedure to st art the tractor is model specific. Refer to the tractor operator’s manual for st arting procedures for your p articular tractor .
OPERATION TW144 01/11 O peration Section 4-31 © 2011 Alamo Group Inc. OPERA TION 9.3 Raising the Mowe r Using the tractor 3-point hitch control lev er-lift type or hydraulic remote lever-pull and semi-mount type, raise the mowe r high enough to clear all ground obst acles.
OPERATION TW144 01/11 O peration Section 4-32 © 201 1 Alamo Group In c. OPERA TION 9.5 Crossing Ditches and Steep Inclines When crossing ditches with steep ba nks or going up sharp inclines, it is po.
OPERATION TW144 01/11 O peration Section 4-33 © 2011 Alamo Group Inc. OPERA TION Inclines and ditches should be app roached along a line which is at an an gle as shown. This type of path will reduce the possib ility of over-collapse of the driveline and re sulting damag e.
OPERATION TW144 01/11 O peration Section 4-34 © 201 1 Alamo Group In c. OPERA TION Many varied objects, such as wire, cable, rope, or chains, can become ent angled in the operating p arts of the mower h ead. These items could then swing out side the housing at greater velocities than the blad es.
OPERATION TW144 01/11 O peration Section 4-35 © 2011 Alamo Group Inc. OPERA TION Rotary Mowers are capable under adverse conditions of throwing objects for great distances ( 300 feet or more) and causing serious injury or death. Follow safety messag es carefully .
OPERATION TW144 01/11 O peration Section 4-36 © 201 1 Alamo Group In c. OPERA TION 10.4 PT O RPM and Ground Speed Ground speed for mowing will depend upon the height, type , and density of vege tation to be cut. Recommended speed for ef ficient mowe r performance is between 2 and 5 mph(3-8 kp h).
OPERATION TW144 01/11 O peration Section 4-37 © 2011 Alamo Group Inc. OPERA TION Do not mow with two machines in the same ar ea except with Cab tractors with the windows closed. (SGM-1 1) Mow only in conditions where y ou have clear visibility in daylight or with adequate artificial lighting.
OPERATION TW144 01/11 O peration Section 4-38 © 201 1 Alamo Group In c. OPERA TION Do not let the Blad es turn when the Mower Deck is raised for any reason, including clearan ce or for turning.
OPERATION TW144 01/11 O peration Section 4-39 © 2011 Alamo Group Inc. OPERA TION 10.6 Right of W ay (highway) Mowing • USE DOUBLE CHAIN GUARDS for highway , right-of-way , parks, gree nbelt mowing, or all other mowing where human dwellings, vehicles, or lives tock coul d be within 300 feet of the mow er .
OPERATION TW144 01/11 O peration Section 4-40 © 201 1 Alamo Group In c. OPERA TION Never stan d or allow another person to st and between a running T ractor an d the Mower when disconnecting the Implement from the T ractor 3-point hitch.
OPERATION TW144 01/11 O peration Section 4-41 © 2011 Alamo Group Inc. OPERA TION Always shut the T ractor completely down, pl ace the transmission in park , and set the parking brake before you or anyone else attemp t s to connect or disco nnect the Implement and T racto r hitches.
OPERATION TW144 01/11 O peration Section 4-42 © 201 1 Alamo Group In c. OPERA TION 12. MOWER STORAGE Properly prepa ring and storing the mower at the end of the season is critical to maintaining it s appearance and to help ensure year s of dependable service.
OPERATION TW144 01/11 O peration Section 4-43 © 2011 Alamo Group Inc. OPERA TION Before transporting th e tractor and mower , idle the tractor engine, d isengage the PTO an d wait for all mower moving parts to come to a complete stop. Once all mower part s are completely stopped, raise the mower to transport height.
OPERATION TW144 01/11 O peration Section 4-44 © 201 1 Alamo Group In c. OPERA TION The SMV (Slow-Movin g V ehicle) emblem is universal symbol used to alert drivers of the presence of equipme nt traveling on roadways at a slow speed. SMV signs are a triangula r bright orange with reflective r ed trim for both easy day and night visibility .
OPERATION TW144 01/11 O peration Section 4-45 © 2011 Alamo Group Inc. OPERA TION 13.2 Hauling the T ractor and Implement Before transpor ting a loaded tractor and implement, mea sure the height and width dim ensions and gross weight of the complete load ed unit.
OPERATION TW144 01/11 O peration Section 4-46 © 201 1 Alamo Group In c. OPERA TION 14. TROUBLESHOOTING GUIDE Problem Possible Cause Remedy Uneven Cut Excessive ground speed. Reduce ground speed. Blades worn, dull, or bent. Replace blades. (Refer to “ Maintenan ce” section).
OPERATION TW144 01/11 O peration Section 4-47 © 2011 Alamo Group Inc. OPERA TION Blade Bolts W orking Loose Bolts not tighte ned. T ighten Bolts to 300 f t./lbs. Bolt hole elongated or ove rsized. Replace Blade Carrier . Locknut worn out. Replace Locknut.
.
Maintenanc e Section 5-1 ©201 1 Alamo Group MAINTENANCE SECTION.
MAINTENANCE TW144 01 /11 Maintenance Section 5-2 ©201 1 Alamo Group MAINTENANCE HAZARDS WITH MAINTENANCE OF IMPLEMENT A VOID SE RIOUS INJURY OR DEA TH FROM COMPONENT FAILURE BY KEEPING IMPLEMENT IN GOOD OPERA TING CONDITION IN PERFORMI NG PROPER SERVICE, REP AIRS AND MAINTENANCE.
MAINTENANCE TW144 01 /11 Maintenance Section 5-3 ©201 1 Alamo Group MAINTENANCE Before operating your Rota ry Cutter , make sure it is properly lubricated and th oroughly inspected. Only a minimum of time and effort is requir ed to regularly lubr icate and maintain this machin e to provide long life and trouble free oper ation.
MAINTENANCE TW144 01 /11 Maintenance Section 5-4 ©201 1 Alamo Group MAINTENANCE ..
MAINTENANCE TW144 01 /11 Maintenance Section 5-5 ©201 1 Alamo Group MAINTENANCE.
MAINTENANCE TW144 01 /11 Maintenance Section 5-6 ©201 1 Alamo Group MAINTENANCE GEARBOX The Gearbox has been filled with lubricant to the T e st P lug Level prior to shipme nt. However , you should check the oil level at T est Plug before op erating, and freque ntly thereafter .
MAINTENANCE TW144 01 /11 Maintenance Section 5-7 ©201 1 Alamo Group MAINTENANCE DRIVELINES Many of the equipment compon ents are HEA VY (70 lbs or greater) and S pecial L ifting Procedures are reco mmended.
MAINTENANCE TW144 01 /11 Maintenance Section 5-8 ©201 1 Alamo Group MAINTENANCE EXTENDED LUBE LEVER LOCA TION INTERV AL ACTION PUMP S Cross & Bearings 8 Hours 2 - 3 T elescoping Tu be 8 Hours 6 -.
MAINTENANCE TW144 01 /11 Maintenance Section 5-9 ©201 1 Alamo Group MAINTENANCE MAIN & JACKSHAFT DRIVELINE SHIELDS T o remove the main inner driveline shield, Remove the locking scre ws. Align the bearing tabs with the cone pockets. FIGURE Mnt-0026.
MAINTENANCE TW144 01/11 Maintenance Section 5-10 ©201 1 Alamo Group MAINTENANCE MAIN CV DRIVELINE SAFETY SHIELD (FIGURE Mnt-R-0032) T o remove the outer CV cone, remove the locking screws from shield cone. Remove cone over yo ke. MNT-R- 0038. Remove bearing r ing and remove the lo cking sc rews from inner shield cone.
MAINTENANCE TW144 01/11 Maintenance Section 5-11 ©201 1 Alamo Group MAINTENANCE 1. Loosen 1 1/16” bolt end one revo lution. 1. Inser t drift punch (max. diam eter 0.375) into hole opposite the hex h ead and impact with hammer . 2. Repeat operations 1 & 2.
MAINTENANCE TW144 01/11 Maintenance Section 5-12 ©201 1 Alamo Group MAINTENANCE BLADE SHARPENING Always sharpen both blade s at same time to maintain ba lance. Follow original sharpening pattern as shown in Mnt-R-0008. Always sharpe n blades by grinding.
MAINTENANCE TW144 01/11 Maintenance Section 5-13 ©201 1 Alamo Group MAINTENANCE Blade Bolt Inspection Inspect Blade Bolt Head da ily for wear as followed: Inspect the Blade Bolt Heads d aily for abn ormal wear .
MAINTENANCE TW144 01/11 Maintenance Section 5-14 ©201 1 Alamo Group MAINTENANCE BLADE CARRIER INST ALLA TION Clean the splines on both the blad e carrier and o utput shaft. Position carrier on the gearbox output sha ft and install special washer , and nut.
MAINTENANCE TW144 01/11 Maintenance Section 5-15 ©201 1 Alamo Group MAINTENANCE BLADE TIMING AND ROT A TION (Mnt-R-0 102) Blades on multi-spindle mower s overlap cutting pa ths to ensure a co mplete cut across the width of the mower and to compensa te for blade tip wear .
MAINTENANCE TW144 01/11 Maintenance Section 5-16 ©201 1 Alamo Group MAINTENANCE SLIP CLUTCH A slip clutch is incorporated in the PTO drive line. It is designed to slip, absorb the shock load, and protect the driveline. After the first ho ur of operation, the slip clutch should be checked for ove rheating.
MAINTENANCE TW144 01/11 Maintenance Section 5-17 ©201 1 Alamo Group MAINTENANCE STORAGE Y our rot ary cutter represent s an investment from which you should get the gre atest possible benefit.
MAINTENANCE TW144 01/11 Maintenance Section 5-18 ©201 1 Alamo Group MAINTENANCE.
SEGURIDAD TW144 01/11 Sección de Seguridad 1-14 © 201 1 Alamo Group Inc. SEGURIDAD INFORMACIÓN DE P ARTES NOT A: Para ver las calco m an ias en esp a ño l po rf av or de referi rs e a la pa g ina 1- 20 en la se cc ion de se gu rid ad en ingles.
SEGURIDAD TW144 01/11 Sección de Seguridad 1- 13 © 201 1 Alamo Group Inc. SEGURIDAD RIESGOS CON EL MANTEN IMIENTO DEL IMPLEMENT O MANTENGA LOS IMPLEMENTOS EN BUENAS CONDI CIONES DE FUNCIONAMIENTO, A TRA VÉS DE UN SERVICIO, REP ARACIÓN O MANTENIMIENTO APROPIADO.
SEGURIDAD TW144 01/11 Sección de Seguridad 1-12 © 201 1 Alamo Group Inc. SEGURIDAD RIESGOS EN TRANSPORTE P ARA EV IT A R LESIONES GRA VES O LA MUER TE AL REMOLCAR O TRANSPORT AR EQUIPOS: • MANTENGA la velocidad de transporte POR DEBAJO D E 20 mill as por hora para mantener el control del equipo.
SEGURIDAD TW144 01/11 Sección de Segurid ad 1-11 © 201 1 Alamo Group Inc. SEGURIDAD RIESGOS ELÉCRTICOS Y DE FUEGO P ARA EVIT AR LESIONES GRA V ES O LA MUERTE POR CONT ACT O ELÉCTRIC O AL TRABAJAR .
SEGURIDAD TW144 01/11 Sección de Seguridad 1-10 © 201 1 Alamo Group Inc. SEGURIDAD RIESGO DEL CONT ACT O A LAS CUCHILLAS DE CORT ADORA RIESGO DE FIL T RACION DE ACEITE HIDRÁULICO DE AL T A PRESIÓN.
SEGURIDAD TW144 01/11 Sección d e Seguridad 1 -9 © 201 1 Alamo Group Inc. SEGURIDAD RIESGO DE ENREDO POR EL PT O MANTÉNGASE ALEJADO DE LAS LÍNEAS DE CONDUCCIÓN Y OTROS ELEMENTOS GIRA TORIOS P ARA.
SEGURIDAD TW144 01/11 Sección de Seguridad 1-8 © 201 1 Alamo Group Inc. SEGURIDAD RIESGO DE A TROPELLO P ARA EVIT AR LESIONES GRA VES O LA MUERTE POR CAÍDA DEL TRACTOR O A TROPELLO DEL EQUIPO: • USE tractores equipados con SISTEMA ANTIVUELCO (ROPS) y CINTURONES DE SEGURIDAD p ara las operaciones de corte.
SEGURIDAD TW144 01/11 Secc ión de Seg uridad 1-7 © 201 1 Alamo Group Inc. SEGURIDAD RIESGO DE OBJECT OS LANZADOS Continuado OPERACIÓN DE LA CO RT ADORA: • NO exceda la cap acidad de corte nominal de la cort adora, ni corte elementos que no sean veget ación.
SEGURIDAD TW144 01/11 Sección de Seguridad 1-6 © 201 1 Alamo Group Inc. SEGURIDAD RIESGO DE OBJECT OS LANZADOS LAS CORT ADORAS GIRA TORIAS PUEDEN ARROJAR OBJETOS A 90 METROS (300 PIES) O MÁS EN CONDICIONES ADVERSAS.
SEGURIDAD TW144 01/11 Secc ión de Seg uridad 1-5 © 201 1 Alamo Group Inc. SEGURIDAD RIESGO DE APLAST AMIENTO P ARA EVIT AR UNA LESIÓN GRA VE O LA MUERTE POR CAÍDA DEL TRACTOR, O EL APLAST AMIENTO,.
SEGURIDAD TW144 01/11 Sección de Seguridad 1-4 © 201 1 Alamo Group Inc. SEGURIDAD SEGURIDAD DE CONECT AR O DESCONECT AR IMPLEMENTO P ARA EVIT AR LESIONES GRA VES O LA MUERTE POR A PLAST A MIENTO POR.
SEGURIDAD TW144 01/11 Secc ión de Seg uridad 1-3 © 201 1 Alamo Group Inc. SEGURIDAD SEGURIDAD DEL OPERADOR P ARA EVIT AR LESIONES GRA VES O LA MUERTE, SIGA LAS SIGUIENTES INSTRUCCIONES: • LEA, COMPRENDA y SIGA las instrucciones del Manual del Operador , al igual que las Adverten cias y Men sajes de Seguridad.
SEGURIDAD TW144 01/11 Sección de Seguridad 1-2 © 201 1 Alamo Group Inc. SEGURIDAD INSTRUCCIONES DE SEGURI DAD Y PRÁCTICAS GENERALES El mejor ope rador es un op erador cuidadoso. La se guridad es de import ancia fundamental p ara el fa bricante, y tamb ién debería ser lo p ara e l pr opietario u op erador .
Sección de Seguridad 1-1 © 201 1 Alamo Group Inc. SECCIÓN DE SEGURIDAD.
.
Instrucciones de operaciones antes de la entrega del DISTRIB UIDOR al CLIENTE El distribuidor deberá informar al comprad or de este pr oducto las condiciones, d isposiciones y procedimientos de garan.
Alamo Group Ag. Division está dispue sto a suministrar un (1) Video de Prácticas de Seguridad p ara Cort adoras AEM Por favor enviar: Video de Seguridad para el Opera dor de Cortadoras AEM/FEMA – .
A fin de reducir la tasa de accidentes y mejorar la opera ción segura de las cortador as, Alamo Group Ag Division se ha asociado con otros fabrican tes de la industria par a de sarrollar el video y la g uía de Prácticas de Seguridad para Cortadoras Indust rial es y Agrícolas AEM/FEMA.
Al propiet ario/operador/distribuidor Este Manual del Operado r es una parte esen cial de la o peración segura de est a máquina y se debe manten er con la unidad siempre. El imp lemento incluye un port a manual donde se pu ede guardar el manual d e manera adecuada.
© 201 1 Alamo Group In c. TW144 Publicado en 01/1 1 Parte nº. 00761232C MANUAL DE OPERADOR RHINO ® 1020 S. Sangamon A ve. Gibson City , IL 60936 800-446-5158 Email: parts@servis-rhino.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Rhino Mounts TW144 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Rhino Mounts TW144 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Rhino Mounts TW144, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Rhino Mounts TW144 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Rhino Mounts TW144, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Rhino Mounts TW144.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Rhino Mounts TW144. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Rhino Mounts TW144 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
