Manuel d'utilisation / d'entretien du produit UEH4002 du fabricant ATEN Technology
Aller à la page of 17
Cat 5 USB 2.0 Extender UEH4002 User Guide www.aten.com.
UEH4002 User Manual ii Thank you fo r purchasing t he UEH4002. Please read this guide thoroug hly. F eder al Communic a tion Commis sion Interference St a tement This equipment has been tested and foun d to comply with the limits for a Class B digital service, pursuant to Part 15 of the FCC rules.
UEH4002 User Manual iii Content s Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 UEH4002 Product Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Requirements .
1 Introduction The instructions in this guide assume a gene ral knowledge of computer installation procedures, familiarity with cabling r equirements, and some understanding of USB devices. UEH4002 Product Contents Your UEH4002 is packaged with: UEH4002LUSB 2.
UEH4002 User Manual 2 The UEH4002L The Local unit connects to the computer usi ng a standard USB cable. Power for this unit is provided by the USB on the host computer. ITEM TYPE DESCRIPTION 1 Power LED (Blue) LED turns on when powe r is supplied. Off when no power is supplied.
UEH4002 User Manual 3 The UEH4002R The Remote unit provides USB Type A ports for standard USB devices. It allows you to connect up to four USB devices directly. Additional devices may be connected by attaching USB hubs to the Remote unit. T he Remote unit is powered by an external AC adapter and can supply up to 500 mA to each USB port.
UEH4002 User Manual 4 7 Power Port Connects to the AC power supply . Required at Remote for proper operation. 8 Link Port (RJ45) Accepts RJ45 connec tor for Cat 5 cabling (or better).
UEH4002 User Manual 5 Inst alla tion Guide USB extension up to 100m Cat 5 (or better) cable. Before you can install the UEH4002, you need to prepare your site: 1. Determine where the computer is to be located and set up the computer . 2. Determine where you want to locate the USB device(s).
UEH4002 User Manual 6 Connecting the Lo cal unit to the R emote unit Note: To ensure proper operation, it is recommended that only Cat 5 or better, Unshielded Twisted Pair (UTP) cabling be used to co nnect the Local unit to the Remote un it.
UEH4002 User Manual 7 Connecting a USB Device 1. Install any software required to operate the USB device(s). Refer to the documentation for the USB device(s), as requir ed. 2. Connect the USB device to the device port on the Remote unit. 3. Check that the device is detected and installed properly in the operating system.
UEH4002 User Manual 8 Link LED on Local unit is on, Host LED on Local unit is off. The host computer is not power ed on. The Local unit is not connected to the computer (when used with the optional Local AC adapter). The computer does not support USB hubs.
UEH4002 User Manual 9 USB device is attached to Remote USB port but Remote device LE D is off . • A USB device must have the appropriate driver installed on the computer operating system. 1. Install the required USB device driver on the computer operating system prior to attaching the USB device to the Remote unit.
UEH4002 User Manual 10 Specific a tions Range 330 feet (100 meters) over Cat 5e (or better ) cable USB device support High-speed de vices (480 Mb/s) (USB 2.0) Full speed devices (12 Mb/s) (USB 2.0 & 1.1) Low speed devices (1.5 Mb/s) (USB 2.0 & 1.
UEH4002 User Manual 11 Limited Hardware W arr anty ATEN warrants that any hardware products accompanying this document ation shall be free from significant defects in material and workmansh ip for a period of one year from the date of purchase. ATEN’s hardware warranty extends to Licensee, its customers, and end users .
UEH4002 User Manual 12 Obt aining W arranty Ser vice To obtain warranty service, you must contact ATEN within the warran ty period for a Return Material Authorization (RMA) number. ATEN will not accept returns without an authorized RMA number. Be sure you have t he serial numbers of the Local unit and Remote unit before calling.
UEH4002 User Manual 13 Tec h n i cal G l o ssary Category 5 (Cat 5) Network Cabling Category 5 cable is commonly also referred to as Cat 5. This cabling is available in either solid or stranded twisted pair copper wire variants and as UT P (Unshielded Twisted Pair) or STP (Shielded Twiste d Pair).
UEH4002 User Manual 14 T a ble 2 - T568B W iring PIN P AIR WIRE CAB LE COLOR 1 2 1 WHITE/O RANGE 2 2 2 ORANGE 33 1 W H I T E / G R E E N 41 2 B L U E 51 1 W H I T E / B L U E 6 3 2 GREEN 7 4 1 WHITE/B.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté ATEN Technology UEH4002 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du ATEN Technology UEH4002 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation ATEN Technology UEH4002, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le ATEN Technology UEH4002 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le ATEN Technology UEH4002, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du ATEN Technology UEH4002.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le ATEN Technology UEH4002. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei ATEN Technology UEH4002 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
