Manuel d'utilisation / d'entretien du produit KX-TCD951EB du fabricant Panasonic
Aller à la page of 48
Operating Instructions Model No. Digital Cordless Phone KX-TCD951EB 1 ABC 2 DEF 3 GHI 4 JKL 5 MNO 6 PQRS 7 TUV 8 0 WXYZ 9 RCL PWR PROG RDL INT' OK C PLEASE READ BEFORE USE AND SA VE. Charge the batteries for about 4 hours before initial use. This equipment is not designed for making emergency telephony calls when the power fails.
Important Information 2 APPROVED for connection to telecommunication systems spec- ified in the instructions for use subject to the conditions set out in them. 6101 10 Do not connect the AC adaptor to any AC outlet other than the standard AC 230–240 V , 50 Hz.
3 a) This apparatus may be used on telecommunication systems employing LD and MF signalling. It is suitable for connection to a direct exchange line on the PSTN (Public Switched T elephone Network) or via a compatible PBX (Private Branch Exchange). (Contact the supplier for an up to date list of compatible PBX’s.
Before Initial Use 4 Thank you for purchasing your new Panasonic digital cordless telephone. For your future reference Serial No. Date of purchase (found on the bottom of the unit) Name and address of dealer Included with this unit AC Adaptor (p . 10) P ar t No.
5 For Best Performance Battery Charge Rechargeable Ni-Cd batteries power the handset. Install the batteries (p. 9) and charge them for about 4 hours before initial use (p . 11). Base Unit Location Calls are transmitted between the base unit and the handset using wireless radio w aves .
Contents 6 Making Calls ..................................16 Answering Calls ............................17 Speed Dialling ...............................18 Storing Phone Numbers in Memory ....................................18 Dialling a Stored Number .
7 Chapter 1 Chapter 2 Chapter 3 Chapter 4 Chapter 5 Chapter 5 Useful Information Chapter 4 Multi-Unit User Operations For Optional Multi-Unit Users.......30 Operating More than One Handset ........................................30 Operating More than One Base Unit .
8 Location of Controls Base unit Handset Charge Contacts (p. 11) Page Button (p. 20, 31, 36) In Use Indicator ( ) (p. 20, 31) Charge Indicator ( ) (p. 11) Antenna 1 ABC 2 DEF 3 GHI 4 JKL 5 MNO 6 PQRS 7 TUV 8 0 WXYZ 9 INT' OK OK C PWR RCL PROG RDL Display (p.
Chapter 1 Preparation 9 Display Icons (The display sho ws all possible configurations.) The in range icon indicates that the handset is in range of the base unit. It flashes when the handset is out of range. The page/intercom icon is display ed when paging or using the intercom.
Connections Plug in the AC adaptor and the telephone line cord to the bottom of the unit. Then connect the cords as shown. 10 Settings 8V 9V Fasten the cords to prevent them from being disconnected. Hooks To Mains Outlet (AC 230–240 V, 50 Hz) To B.T.
Chapter 1 Preparation 11 Battery Charge At the time of shipment, the batteries are not charged. T o charge, place the handset on the base unit. Please charge the batter ies for about 4 hours before initial use.
Settings 12 -i - T urning the Power ON T o turn the po wer OFF , press and hold until a beep sounds. • The display will go b lank. • The handset will not ring. • Depending on the programming mode, y ou may not be ab le to tur n the power off . First make sure the handset is set to the stand-b y mode.
13 Chapter 1 Preparation Selecting the Dialling Mode Y ou can program the dialling mode to tone or pulse. If you hav e touch tone ser vice, set to tone. If rotary or pulse ser vice is used, set to pulse. The factory preset is tone. Make sure that the power is ON and the unit is in the stand-by mode.
14 Settings Selecting the Handset Ringer V olume/Pattern Y ou can program the desired handset ringer volume and pattern . Make sure that the power is ON (p. 12) and the unit is in the stand-by mode . 1 Press . 2 Press G or F until “ F22 ” is displayed.
15 Chapter 1 Preparation Ex. MEDIUM is selected. Selecting the Base Unit Ringer V olume 4 lev els (HIGH, MEDIUM, LOW , OFF) are av ailable. The factory preset is MEDIUM. When set to OFF , the base unit will not ring. Make sure that the power is ON (p.
16 T o select the receiver volume 3 lev els (HIGH, MEDIUM, LOW) are a vailable . The factory preset is MEDIUM. While talking, press F or G to select the desired level. • After a fe w seconds, the displa y will retur n to the length of call. OR In the stand-by mode, proceed as f ollows.
17 Chapter 2 Basic Operations T o turn the handset ringer off temporarily When the handset starts ringing, press G firmly . • “ ” is display ed and the handset stops ringing. • The ringer will tur n back on f or the next call. • This function will not work when the handset is on the base unit.
Storing Phone Numbers in Memory Y ou can store up to 20 telephone numbers in the handset. Make sure that the power is ON (p. 12) and the unit is in the stand-by mode . 18 Dialling a Stored Number 1 Press G or F until a desired memory station number ( 00 to i9 ) is displayed.
19 Chapter 2 Basic Operations How to Use the Pause Feature (For Analog PBX Line/Long Distance Service Users) We recommend y ou press if a pause is required f or dialling with a PBX or to access a long distance service. Ex: Line access number (PBX) ➡➡ Phone number • Pressing once creates a pause .
20 Setting the Key Lock Y ou can lock the handset dialling buttons. Only incoming calls are accepted until the ke y lock is cancelled. When the unit is in the stand-by mode, press and hold until a beep sounds. • “ ” is display ed and all dialling buttons are lock ed.
21 Chapter 2 Basic Operations Using the Recall Feature is used to access special telephone services (optional) such as call waiting. Contact your telephone company business office f or details.
22 Y ou can program the follo wing function items using the handset near the base unit . See the corresponding pages for function details . Make sure that the power is ON (p. 12) and the unit is in the stand-by mode . Code Function item F1 T o select the base unit access (p.
23 Chapter 3 Advanced Operations 1 Press then . 2 Press . 3 Enter the current handset passwor d. • The factory preset is 0000. 4 Enter the new 4-digit passw ord TWICE. • A confirmation tone sounds and the display will return to the stand-by mode .
24 Direct Call Y ou can store a number in the direct call memor y . This feature allows y ou to make a call easily by pressing . Incoming calls are accepted. Setting the Direct Call Mode After storing the direct call number , the unit will automatically switch to the direct call mode.
25 Chapter 3 Advanced Operations Call Prohibition T o turn OFF the call prohibition mode Press G or F to select OFF in step 5. • Y ou can press to select OFF . • “ ” will go out. 0 Y ou can prohibit anyone from making a call with your handset e xcept for emergency calls (999, 112).
26 When you dial a restricted n umber , the call is disconnected, and the dialled number flashes. Ex. The restricted number is “00”. T o cancel the call restricted handset(s) Follow steps 1 to 3, then enter the handset number(s) y ou want to cancel.
27 Chapter 3 Advanced Operations Other Programmable Settings Setting the Range W arning Alarm Y ou can choose whether or not the handset will sound a range warning alarm. The factory preset is OFF . Setting the Key T ones Y ou can choose whether or not the handset ke ys will sound tones (key tone, confirmation tone, error tone).
28 Other Programmable Settings Selecting the T alk Mode Display Y ou can choose whether to display the length of the call or the dialled telephone number while in the talk mode. The factory preset is the length of the call. 1 Press . 2 Press G or F until “ F32 ” is displayed, then press .
29 Chapter 3 Advanced Operations This function enables the handset or base unit to clear the f ollowing settings at one time. They will return to their initial settings. Clearing the Settings in Memory On the handset On the base unit 1 Press . 2 Press G or F until “ F0 ” is displayed, then press .
30 For Optional Multi-Unit Users Operating More than One Handset Y ou can register and operate up to 6 handsets at the base unit. Operating more than one handset allows you to hav e an inter nal call while simultaneously conducting an external phone call using another handset.
- Chapter 4 31 Multi-Unit User Operations Registration Registering a Handset in the Base Unit Y ou must register the handset in the base unit before use. 1 Base unit where handset is to be registered: Press and hold on the base unit for more than 10 seconds until the in use indicator ( ) lights and a confirmation tone sounds.
32 Selecting the Base Unit Access Automatic base unit access The handset automatically selects a registered base unit. • When the handset mov es to another base unit radio area, it loses contact with the previous base unit and automatically accesses the new base unit.
Chapter 4 33 Multi-Unit User Operations Cancelling a base unit If another handset is out of range and/or its power is OFF when “Cancelling a Handset”, the previous base unit n umber will still remain in the cancelled handset. Theref ore, you need to cancel the base unit registered in the cancelled handset .
34 Selecting the Stand-by Mode Display Bell Selection 1 Press then . 2 Press . 3 Enter the base unit passwor d (p. 23). • The current setting is display ed. 1 : All handsets 2 : Specified handset(s) 3 : First handset 1 INT PROG 4 Press . • The current registered handset number(s) is/are display ed.
Chapter 4 35 Multi-Unit User Operations Selecting all handsets When a call is received, all handsets will ring at the same time. 1 Press then . 2 Press . 3 Enter the base unit passwor d (p. 23). 4 Press . 5 Press . • A confirmation tone sounds and the display will return to the stand-by mode .
36 1 Handset 1: Press . 2 Handset 1: Enter the desired handset number . • “ ” is displa yed and the paged handset rings. INT Paging All Handsets from the Base Unit The base unit user can page all handsets. Intercom between Handsets A 2-wa y intercom is availab le between handsets.
Chapter 4 37 Multi-Unit User Operations T ransferring a Call from One Handset to Another The intercom can be used during a call, enablings you to transf er a call between handsets registered to the same base unit. T ransferring a call using the intercom Ex.
38 Paging/Intercom 3 Handset 1: Press to establish a conference call. 4 Handset 1 or 2: Press to hang up the conference call. 3 Setting the Call W aiting T one If an incoming call has been received during an intercom between handsets, a call w aiting tone sounds.
39 Chapter 5 Useful Information Replacing the Batteries If “ ” flashes after a fe w telephone calls ev en when the handset batteries have been fully charged, it is time to replace the batteries with new ones. Remember to charge the new batteries after replacement.
40 Replacing the Batteries Caution: T o reduce the risk of fire or injur y to persons, read and follo w these instructions. 1. Use only the batteries specified. 2. Do not use non-rechargeable batteries. 3. Do not mix old and new batteries. 4. Do not dispose of the batteries in a fire.
41 Chapter 5 Useful Information Before Requesting Help Problem The unit does not work. “ ” flashes and an alarm tone sounds when you press . A busy tone sounds when y ou press . Y ou cannot dial. “ ” flashes during a conversation and the call is disconnected.
42 Before Requesting Help Problem Y ou cannot program function items such as the dialling mode. Y ou cannot store a phone number in memory . While programming function items or storing numbers, the unit star ts to ring. does not function. Y ou cannot redial.
43 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 ✂ Problem Y ou cannot register the handset in the base unit. “ ” flashes or the unit beeps ev er y 15 seconds. Y ou charged the batter ies fully , but “ ” flashes. The charge indicator ( ) light nev er goes out while charging.
Safety Instructions 44 T ake special care to f ollow the saf ety suggestions listed below . Safety 1) The unit should be connected to a power supply only of the type described in the operating instructions or as marked on the unit. 2) When the unit is not used, turn the power off.
45 Chapter 5 Useful Information Adding Another Phone This unit will not function during a power f ailure. T o connect a standard telephone on the same line, use a T -adaptor .
46 Dear purchaser , Y ou have acquired a KX-TCD951EB, which is a product made in regard with the European Standards for Cordless T elephones (DECT). DECT technology is characterised by high-security protection against interceptions as well as high-quality digital transmission.
47 GUARANTEE CONDITIONS OF GUARANTEE This guarantee is in addition to and does not in any way affect any statutory or other rights of consumer purchasers.
0 6 8 1 Sales Department: Panasonic Business Systems U.K. Panasonic House, Willoughby Road, Bracknell, Berkshire, RG12 8FP Manufacturer: Kyushu Matsushita Electric (U.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Panasonic KX-TCD951EB c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Panasonic KX-TCD951EB - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Panasonic KX-TCD951EB, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Panasonic KX-TCD951EB va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Panasonic KX-TCD951EB, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Panasonic KX-TCD951EB.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Panasonic KX-TCD951EB. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Panasonic KX-TCD951EB ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
