Manuel d'utilisation / d'entretien du produit CDR300 du fabricant Marantz
Aller à la page of 36
Model CDR300 User Guide CD Recorder CLASS 1 LASER PRODUCT KLASSE 1 LASER PRODUKT I.H.T. IEC 825 R.
- 2 - RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION CA UTION: T O REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SER VICEABLE P ARTS INSIDE REFER SER VICING T O QU ALIFIED SER V.
- 3 - SAFETY INSTRUCTIONS READ BEFORE OPERA TING EQUIPMENT This product was designed and manufactured to meet strict quality and safety standards. There are, howe ver some installation and operation precautions which you should be particularly aware of.
Specifications General System ............... Compact Disc Digital A udio (CD-D A) Number of channel s ...................................... 2 (stereo) Applicable discs .............................. CD , CD-R, CD-R W P ow er requirements ......AC100V -240V , 50/60 Hz, 21W DC .
T able of Contents - 5 - T opic page W ar nings .............................................................. 2 Safety Instr uctions ................................................ 3 Specifications ...................................................
- 6 - T able of Contents continued Introduction The CDR300 CD recording system is a CD recorder with pla yback capability . For CD recording you can: • record on CD-R or CD-R W discs • record from.
BASS MID TREBLE TEXT PHANTOM PROG REPEAT MENU/STORE DISP SINGLE A-B CANCEL/DELETE REC MODE ERASE FINALIZE REC SELECT PUSH ENTER POWER STANDBY CD RECORDER CDR300 PROFESSIONAL - 7 - Package contents BAS.
Controls, Display (top) 1 Speaker grill The built in full range speaker allows listening to a CD without having to connect to other equipment for amplification.
- 9 - Controls, Display (top) continued BASS MID TREBLE TEXT PHANTOM PROG REPEAT MENU/STORE DISP SINGLE A-B CANCEL/DELETE REC MODE ERASE FINALIZE REC SELECT PUSH ENTER POWER STANDBY CD RECORDER CDR300.
- 10 - Controls, Display (top) continued BASS MID TREBLE TEXT PHANTOM PROG REPEAT MENU/STORE DISP SINGLE A-B CANCEL/DELETE REC MODE ERASE FINALIZE REC SELECT PUSH ENTER POWER STANDBY CD RECORDER CDR30.
- 11 - Controls, Display (top) continued POWER 5 Standby POWER switch Slide the Standby POWER switch to the right to tur n power on or off . POWER button on rear of unit must be ON (the red ST ANDBY STANDBY 6 ST ANDBY light ST ANDBY light (red) is lit when power is s witched off by the Standb y POWER switch on the unit or remote.
- 12 - Controls, Display (top) continued 7 Display continued R L dB-50 -30 -22 -16 -12 -8 -4 0 OVER 1 A B TOTAL TRACK REPEAT AUTO SYNC PROGRANDOM DIGITAL STANDBY CD-RW CD TEXT TOC SYNC 14 SYNC indicator Lit when a SYNC RECORD mode is on.
- 13 - Controls, Connections (front) PHONE/SPEAKER LEVEL PHONES LINE OUT ReWritable Recordable CD PLAY / RECORD OPEN/CLOSE DIGITAL ANALOG INPUT ON OFF SPEAKER PHONE SELECTOR MIC/LINE MIX OUT LINE OUT .
- 14 - Controls, Connections (front) con- tinued PHONE/SPEAKER LEVEL PHONES LINE OUT ReWritable Recordable CD PLAY / RECORD OPEN/CLOSE DIGITAL ANALOG INPUT ON OFF SPEAKER PHONE SELECTOR MIC/LINE MIX O.
POWER ON OFF MIX LINE AUX DIGITAL REMOTE RC-5 EXT. INT. FOOT PEDAL IN OUT IN OUT R L R L IN OUT OUT DC IN - 15 - Controls, Connections (rear) 1 MIX OUT jacks Plug Right and Left RCA audio cables in here to connect to the input of an amplifier or other external unit.
POWER ON OFF MIX LINE AUX DIGITAL REMOTE RC-5 EXT. INT. FOOT PEDAL IN OUT IN OUT R L R L IN OUT OUT DC IN 9 10 Controls, Connections (rear) contin- ued POWER ON OFF 10 Power switch Push and release to turn power ON (in position). Push and release to turn power OFF (out position).
- 17 - How to Play How to Play a CD (basics) How to play BASS MID TREBLE TEXT PHANTOM PROG REPEAT MENU/STORE DISP SINGLE A-B CANCEL/DELETE REC MODE ERASE FINALIZE REC SELECT PUSH ENTER POWER STANDBY CD RECORDER CDR300 PROFESSIONAL 1 Connect and turn on the CDR300, see Connections (basic) on page 7.
- 18 - How to play continued How to select tracks Y ou can select tracks during Stop , Pla y or Pause . T ur n the SELECT control ( 5 ) to choose the track. During play wait about a second or push and release the SELECT control to switch to the beginning of that track.
- 19 - How to play continued Push and release Play/Pause. CD TEXT TRACK R L dB-50 -30 -22 -16 -12 -8 -4 0 a b c Example display: a Play symbol flashing indicates track is playing. b Example track #3 is playing c Flashing "TRA CK" indicates single track play .
- 20 - How to play continued a b 3 Push Play/ Pause ( a ) to play the pro- gram. TRACK CD R L dB-50 -30 -22 -16 -12 -8 -4 0 CD PROG Example display shown. a Push Play/Pause to pause, push again to resume play from that point in the program. b Push Stop to stop.
- 21 - How to record your voice or instrument (basics) How to Record 10 T ur n the SELECT control so RECORD is dis- played. Then push and release the SELECT control to accept the RECORD recording mode.
How to Record a The red REC indicator and the pause indicator in the display are lit. b The red REC button is lit and flashing. BASS MID TREBLE TEXT PHANTOM PROG REPEAT MENU/STORE DISP SINGLE A-B CANC.
- 23 - How to Record continued Select record mode The record mode (REC mode) sets the CDR300 to expect and accept certain inputs, outputs, and other conditions such as the settings of A UT O TRACK and A UT O ST OP , and the easy av ailability of some adjust- ments such as REC LEVEL.
- 24 - How to Record continued A UT O TRACK When recording with A UTO TRACK ON the CDR300 will automatically increment tracks. If A UT O TRACK is ON and the source of recording is a digital source tha.
- 25 - How to Record continued How to adjust the MIC EQUALIZER With the CDR300 in Stop, Play/Pause, REC or REC Pause mode. BASS MID TREBLE TEXT PHANTOM PROG REPEAT MENU/STORE DISP SINGLE A-B CANCEL/DELETE REC MODE ERASE FINALIZE REC SELECT PUSH ENTER POWER STANDBY CD RECORDER CDR300 PROFESSIONAL 1 2 1 Push and release MENU/ST ORE.
- 26 - The FIL TER SELECT menu item lets you turn high pass or band pass filters on the right or left MIC/LINE inputs on or off. How to select filter s (FIL TER SELECT) F IL TER S PECIFICA TIONS Frequ.
- 27 - Y ou can only erase CD-R W discs. Y ou can erase one or more trac ks from the end of the CR-RW disc , or you can er ase the entire disc. If finalized, erasing a track or the disc automatically unfinalizes the disc.
- 28 - How to Finalize Finalizing is writing the TOC (tab le of contents) on a disc so a CD player can recognize the number of tracks, the total time for each track, and their location on the disc. A recorded disc must be finalized to pla yback on a standard CD play er .
About the Remote - 29 - POWER ON OFF MIX LINE AUX DIGITAL REMOTE RC-5 EXT. INT. FOOT PEDAL IN OUT IN OUT R L R L IN OUT OUT DC IN REMOTE EXT. INT. The REMO TE EXT . INT . switch on the bac k of the CDR300 must be at INT . for the infrared remote to work.
- 30 - About the Remote continued 1 ABC 2 DEF 3 GHI PROG 4 JKL 5 MNO 6 PQR TEXT 7 STU 8 VW 9 XYZ SINGLE DISPLAY 0 SPACE REPEAT CAN/DEL ENTER MEN/STO A B TR INC REC REMOTE CONTROLLER RC300CDR AMS 20 21 22 15 16 17 18 19 AMS (Automatic Search) button. Remote only .
- 31 - About CD discs The CDR300 can play CD , CD-R, or CD-R W discs and can record on CD-R or CD-RW discs . CD-R (record once) CD-R discs are only able to be recorded onto a single time but will playback in most CD players.
tape or rental CD label with paste protruding from the edge or when a disc has a trace of such a sticky object, do not attempt to pla y the disc. The disc may be impossible to take out, or another malfunction may result. • Write only on the printed side of a CD-R or CD- - 32 - R W disc, and only with a soft felt-tipped pen.
- 33 - TEXT EDIT continued The SELECT control presents the following characters in order: The _ after the 9 is recorded as a space. Consider using the infrared remote control to enter CD text. All the numbers, the space , and all upper and lower case characters are available from the remote alphanumeric keypad.
- 34 - How to erase CD text The TEXT ERASE menu item lets you delete CD text that has been entered. With your unfinalized disk in the CDR drive and stopped 1 Push and release MENU/ST ORE.
- 35 - T roubleshooting W arning! Under no circumstances should you try to repair the unit yourself. That will cause a safety hazar d and void the warranty . No Power • Check that the Power switch on the back of the CDR300 is in the in ON position. • If the ST ANDBY light is lit, slide the POWER switch to the right.
2640 White Oak Circle T elephone (630) 820-4800 Aurora, Illinois 60504 Fax: (630) 820-8103 Internet: www .superscope-marantzpro .com Superscope T echnologies, Inc. Limited W arranty: Y our Marantz Prof essional product is warranted against manufacturer defects in material and workmanship for a period of one year par ts and labor.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Marantz CDR300 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Marantz CDR300 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Marantz CDR300, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Marantz CDR300 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Marantz CDR300, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Marantz CDR300.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Marantz CDR300. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Marantz CDR300 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
