Manuel d'utilisation / d'entretien du produit SPA 900 du fabricant Linksys
Aller à la page of 165
ADMINISTRA TION GUIDE BUSINESS SERIES Linksy s V oic e S y st em SP A 900 Series IP Phones.
i Linksys IP Phone Administrator Guide Firmware Version 5.1 CONTENTS Document Audien ce i-ix How This Document is Organized i-x Related Documentation i-x Technical Supp ort i-x CHAPTER 1 Introducing L.
Contents ii Linksys IP Phone Administrator Guide Firmware Version 5.1 Front Panel 2-4 Back Panel 2-5 SPA922 2-5 SPA932 2-5 SPA941 2-6 Front Panel 2-7 Back Panel 2-7 SPA942 2-7 SPA962 2-8 Front Panel 2.
Contents iii Linksys IP Phone Administrator Guide Firmware Version 5.1 Localization 3-5 Changing the Display Backg round (SPA942/962) 3-7 Using the SPA932 (Sidecar) with the SPA962 3-8 Configuring the.
Contents iv Linksys IP Phone Administrator Guide Firmware Version 5.1 Audio Volume Adjustment 3-32 Managing Ring Tones 3-33 Configuring a Dial Plan 3-34 Dial Plan Digi t Sequences 3-34 Dial Plan Rules.
Contents v Linksys IP Phone Administrator Guide Firmware Version 5.1 5 Preferences 4-4 5.1 Block Caller ID 4-5 5.2 Block Anonymous Call 4-5 5.3 Do Not Disturb 4-5 5.4 Secure Call 4-6 5.5 Dial Assistance 4-6 5.6 Preferred Audio Device 4-6 5.7 Auto Answer Page 4-6 5.
Contents vi Linksys IP Phone Administrator Guide Firmware Version 5.1 10 Product Info 4-13 10.1 Product Name 4-13 10.2 Serial Number 4-14 10.3 Software Version 4-14 10.
Contents vii Linksys IP Phone Administrator Guide Firmware Version 5.1 Optional Network Configuration 5-7 VLAN Settings 5-8 SIP Tab 5-9 SIP Parameters 5-9 SIP Timer Values (sec) 5-11 Response St atus .
Contents viii Linksys IP Phone Administrator Guide Firmware Version 5.1 User 5-48 Call Forward 5-48 Speed Dial 5-48 Supplementary Services 5-48 Web Information Service Settings (SPA962) 5-49 Traffic S.
ix Linksys IP Phone Administrator Guide Firmware Version 5.1 Preface This guide describes administrat ion and use of th e Linksys V oice System (L VS) IP phones.
x Linksys IP Phone Administrator Guide Firmware Version 5.1 Prefac e How This Docu ment is Organized How This Document is Organized Related Documentation The following document ation provides addition.
1-1 Linksys IP Phone Administrator Guide Firmware Version 5.1 CH A P T E R 1 Introducing Linksys IP Phones This chapter introduces the functionality of the Link sys 900 Series IP phones and includes t.
1-2 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 1 Introducing Link sys IP Phones Linksys IP Phone Features Note PoE units (SP A922, SP A942, and SP A962) do not come with an ext ernal power adapter . The P A100 power supply must be ordered sep arately if you are not using a PoE switch.
1-3 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 1 Introd ucing Linksys IP Phones Linksys IP Phone Features • Music on Hold * • Call W aiting • Outbound Caller ID Bl ocking .
1-4 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 1 Introducing Link sys IP Phones Linksys IP Phone Features SPA901 Features The SP A901 provides the following fe atures that are n.
1-5 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 1 Introd ucing Linksys IP Phones Feature Descriptions Note Linksys IP phones support al l the above voice coding algorithms.
1-6 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 1 Introducing Link sys IP Phones Feature Description s If the Linksys IP phone is currently using a lower prio rity proxy serv er .
1-7 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 1 Introd ucing Linksys IP Phones Feature Descriptions Other Features Ta b l e 1 - 4 summarizes the features prov ided by Linksys IP Phones.
1-8 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 1 Introducing Link sys IP Phones Technology Backg round Technology Background This section provid es background information about .
1-9 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 1 Introd ucing Linksys IP Phones Technology Backgrou nd • Using Linksys IP Pho nes with a Firewall or Router , page 1-9 • Usin.
1-10 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 1 Introducing Link sys IP Phones Technology Backg round Network Address Translation This section describes issues that arise when using the L VS system on a net work behind a network address translation (NA T) device.
1-11 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 1 Introd ucing Linksys IP Phones Technology Backgrou nd NAT Types The ways that NA T is implemented can be divided in to the following categories: • Full cone NA T—Also kn own as one-to-one NA T .
1-12 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 1 Introducing Link sys IP Phones Technology Backg round SIP-NAT Interoperation In the case of SIP , the addresses where messages/data should be sent to a L inksys IP phone system are embedded in the SIP messages sent by the dev ice.
2-1 Linksys IP Phone Administrator Guide Firmware Version 5.1 CH A P T E R 2 Getting Started This chapter describes th e tool s and util iti es availabl e for administering Linksys phones.
2-2 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 2 Getting Started Linksys 900 Series IP Phones • SP A942, pa ge 2-7 • SP A962, pa ge 2-8 Caring for Your Hardware The Linksys 900 Series IP phones ar e electronic devices that should no t be exposed to excessive heat, sun, cold or water .
2-3 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 2 Getting Started Linksys 900 Series IP Phones Front Panel and Side of Phone Back Panel SPA92x, SPA94x, and SPA962 Hardware Featur.
2-4 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 2 Getting Started Linksys 900 Series IP Phones • Built-In High Quality Micro phone and Speaker • Headset Jack – 2.5 millimeter • T wo Ethernet LAN ports (100BaseT RJ-45 ) • 802.
2-5 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 2 Getting Started Linksys 900 Series IP Phones Back Panel SPA922 The SP A922 is similar to the SP A921, but provides Power ov er Ethernet (PoE) and an extra Ethernet port for connecting anothe r device to the LAN (see Figure 2-3 ).
2-6 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 2 Getting Started Linksys 900 Series IP Phones Figur e 2-4 SP A932 (Fr ont View with SP A962) Each SP A932 unit provides 32 pro gr.
2-7 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 2 Getting Started Linksys 900 Series IP Phones Figur e 2-5 SP A941 The following tables describe the status indi cators an d control s on the fro nt of the devi ce and t he port s on the back pa nel of the de vice.
2-8 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 2 Getting Started Linksys 900 Series IP Phones Figur e 2-6 SP A942 SPA962 The SP A962 has a 320 x 240 true color , four-inch, LCD, provides up to six telephone extensions, and supports PoE (see Figure 2-7 ).
2-9 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 2 Getting Started SPA9000 IP PBX System Front Panel Back Panel SPA9000 IP PBX System The SP A9000 IP PBX System (V oIP side), along with the SP A400, which is In ternet T elephony Gateway , p rovides fo r an analog line and voicemail.
2-10 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 2 Getting Started Establishing Connectivity • Installing the SP A900 Series IP Phone, page 2-10 Bandwidth Requirements1 Depending on how you have your IP phones configured, each ca ll re quires 55 to 1 10 kbps in each direction.
2-11 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 2 Getting Started Establishing Connectivity Assembling the Phone and Connecting to the Network Perform the followi ng steps to connect Linksys IP pho ne. Step 1 Find the end of the coi led phone cord that has the longer straightened end.
2-12 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 2 Getting Started Using the Administra tion Web Server Turning on the Phone If you are using an external power source, instead of Power over Ethern et (PoE), plug th e adapter to an electrical outlet.
2-13 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 2 Getting Started Using the Administration Web Server Changing between the tabs on th e V oice page does not discard the unsubmitted changes. Y ou can wait until completing all you r changes on the V oice pages before submitting them.
2-14 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 2 Getting Started Web Interface URLs Web Interface URLs The Linksys IP phone web interface supports several functions th rough special URLs: • Upgrade • Reboot • Resync Administrator account privilege is needed for these functions.
2-15 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 2 Getting Started Provisioning Reboot URL The Reboot URL lets you reboot the Linksys IP phone. Note The Linksys IP phone reboots only when i t is idle. The Reboot URL is http://sp a-ip-addr/admin/reboot.
2-16 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 2 Getting Started Using the Interactive Vo ice Response Interface </flat-profile> Binary format profil es contain Linksys IP phone pa rameter values and user access permissi ons for the parameters.
2-17 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 2 Getting Started Using the Interactive Vo ice Response Interface Step 1 On a SPA901 rt of the Linksys IP phon e. Step 2 Press **** (quick ly press the star key four times). W ait until you hear “Linksys configuration menu.
2-18 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 2 Getting Started Using the Interactive Vo ice Response Interface Set Static IP Address 1 1 1 Enter IP address using numbers on the telephone key pad. Use the * (star) key when entering a decimal point.
2-19 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 2 Getting Started Using the Interactive Vo ice Response Interface Note The items marked with “Requires Pa ssword” require a password only if the Administ rator password is set.
2-20 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 2 Getting Started Using the Interactive Vo ice Response Interface For example, to input password test#@1234 by phone keypad, you need to press the following sequence of digits: 83780 01234 .
3-1 Linksys IP Phone Administrator Guide Firmware Version 5.1 CH A P T E R 3 Managing Linksys IP Phones This chapter describes how t o configure Linksys IP phones and incl udes the following sections:.
3-2 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 3 Managing Linksys IP Phones Using the 900 Seri es LCD Display Figur e 3-1 SP A90 0 Ser ies LCD Contro ls The function of the fou r soft keys depends on the option appearing on the LCD display .
3-3 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 3 Manag ing Linksys IP Phones Using the 900 Series LCD Display Using Soft Keys The LCD can display up to fou r options at one time. Y ou can scroll thr ough a longer list of options by pressing the Navigation butt on up or down.
3-4 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 3 Managing Linksys IP Phones Using the 900 Seri es LCD Display Entering and Saving Settings The SP A900 Series phone GUI lets you en ter alph anumeric and numeric in puts.
3-5 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 3 Manag ing Linksys IP Phones Localization When entering digits in numeric mode, enter the corresponding dig its from th e numeri c key pad.
3-6 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 3 Managing Linksys IP Phones Localization • Dictionary server script—This para meter is u sed to define the location of th e dictionary server , the languages available and the associate d dictionary .
3-7 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 3 Manag ing Linksys IP Phones Changing the Display Background (SPA942/962) Note Y ou must have an ID, Username , and Password for this site. The dictionaries are found in the L VS area of the FW an d T ools sec tion.
3-8 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 3 Managing Linksys IP Phones Using the SPA932 ( Sidecar) with the SPA962 Figure 3-4 Bac k ground Pictur e P aramet ers Step 4 Choo.
3-9 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 3 Manag ing Linksys IP Phones Using the SPA932 (Sidecar) with the SPA962 Step 2 Configure the SIP proxy server: Step 3 Configure the SP A932 using the administr ation web server connected to the SP A962 t o which the SP A932 is physically atta ched.
3-10 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 3 Managing Linksys IP Phones Using the SPA932 ( Sidecar) with the SPA962 Step 1 On the Broadsoft server , in the user profile used by the SP A962 to register with th e Broadsoft server , select Assign Serv ices .
3-11 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 3 Manag ing Linksys IP Phones Using the SPA932 (Sidecar) with the SPA962 Example 3-2 Aster isk Sub scr ibecont ext f or SP A932 [3500] type=friend secret=3500 callerid="spa3500"<3500> nat=no context=home mailbox=3500 Subscribecontext=home .
3-12 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 3 Managing Linksys IP Phones Using the SPA932 ( Sidecar) with the SPA962 Figur e 3-6 SP A932 Configuration Step 7 Select yes from the Unit 1 Enab le pull-down selection list.
3-13 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 3 Manag ing Linksys IP Phones Using the SPA932 (Sidecar) with the SPA962 Note Y ou only need to use the v id= keyword in the first entry assign ed to each SP A962 extensio n. Subsequent keys will use the same ext ension.
3-14 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 3 Managing Linksys IP Phones Configuring the Web Service For instruction s about how to configur e phone extensions usi ng the SP A Installation W izard or the administration web se rver , refer to the SP A9000 Administration Gui de .
3-15 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 3 Manag ing Linksys IP Phones Configuri ng the Web Service • phone configurati on web page • remote provisioning In addition, a small subset of "u ser options" can be set via the phon e’ s GUI under various setup menus.
3-16 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 3 Managing Linksys IP Phones Configuring the Web Service • T emplates are compared in the o rder given. The first, not the closest , match is selected. The parameter name must match exactly .
3-17 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 3 Manag ing Linksys IP Phones Configuri ng the Web Service • T oneScript – A mini-script that specifies the frequency , level and cadence parameters of a call progress tone. May co ntain up to 127 characters.
3-18 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 3 Managing Linksys IP Phones Configuring the Web Service • Example 1 : Dial T one • 350@-19,440@ -19;10(*/ 0/1+2) • Number .
3-19 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 3 Manag ing Linksys IP Phones Configuri ng the Web Service • RingScript – A script that describes a ring tone.
3-20 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 3 Managing Linksys IP Phones RSS Newsfeeds (SPA962) RSS Newsfeeds (SPA962) The SP A962 provides the option to vi ew RSS newsfeeds. Press the Setup b utton-21 (W eb Service) and select one of the foll owing options on the LCD display: 1.
3-21 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 3 Manag ing Linksys IP Phones Call Appearances and E xtensions Call Appearances and Extensions A client station is a Linksys IP p.
3-22 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 3 Managing Linksys IP Phones Line Key LEDs Line Key LEDs This section summarizes the behavior of the line key LEDS o n Linksys IP phones with mult iple line key status indicators. For more information, see “Line Key LED Pattern” section on page 5-31 .
3-23 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 3 Manag ing Linksys IP Phones Line Key LEDs LED Script Examples LED Pattern The administrator can also specify a different color and patt ern for each of the following states of the call appearance.
3-24 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 3 Managing Linksys IP Phones Using Call Features Using Call Features This section describes how the main call feat ures are used or configured.
3-25 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 3 Manag ing Linksys IP Phones Using Call Features A line is selected by pressing the corresp onding line ke y . T o make or receive calls, you must select a call appearance (line key) or an audio device .
3-26 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 3 Managing Linksys IP Phones Using Call Features Hold and Resume An active call can be p laced on hol d by explicit ly pre ssing the Hold k ey , or by pressing another line k ey (to answer an incoming all, resume a held call, or start a new call).
3-27 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 3 Manag ing Linksys IP Phones Using Call Features Once the conference starts, the 900 Series phone plays a special brief tone to all th ree parties to indicate that a conference call is in progre ss.
3-28 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 3 Managing Linksys IP Phones Using Call Features Call Back This service mim ics the call back servic e offered by the PSTN. Y ou can activate this service on a busy number so that you are called back as soon as the busy number becomes availabl e.
3-29 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 3 Manag ing Linksys IP Phones Using Call Features Shared Call Appearances The 900 Series phone suppo rts shared call appearances in asso ciation with a Broadsoft app lication server .
3-30 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 3 Managing Linksys IP Phones Using Call Features Dialing Assistance Dialing assistance is an option you can enable or di sable unde r the Preference s menu.
3-31 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 3 Manag ing Linksys IP Phones Using Call Features Each log is shown on the web p age with the following synt ax: name,ext-id,date-time stamp Where: • ext-id is the extens ion or ph one number of the call peer .
3-32 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 3 Managing Linksys IP Phones Using Call Features UP/DOWN key press plays a short burst of the cur rent ring t one. If one of the audi o devices is select ed, the volume adjustment appli es to t h at device.
3-33 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 3 Manag ing Linksys IP Phones Configuring a Dial Plan Figur e 3-8 Upload R ingtone Utility For input, you can use any .wav file less than eight seco nds. Configuring a Dial Plan The Linksys IP phone al lows each li ne to be confi gured w ith a distinct dial plan.
3-34 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 3 Managing Linksys IP Phones Configuring a Dial Plan The time-out duration depends on the matching state. If no candidate sequences are as yet complete (as dialed), the Interdigit_Lo ng_T imeout applies.
3-35 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 3 Manag ing Linksys IP Phones Configuring a Dial Plan Intersequence Tones An “outside line” dial tone can be gener ated within a sequence by ap pending a comma (,) between digits.
3-36 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 3 Managing Linksys IP Phones Configuring a Dial Plan The following also al lows 7-digit US-sty le dialing, and automatically inserts a 1 + 212 (local area code) in the transmitted number .
3-37 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 3 Manag ing Linksys IP Phones System Administration Interdigit Short Timer The <Interdigit_Sho rt_T imer> specifies the def.
3-38 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 3 Managing Linksys IP Phones System Admi nistration Factory Reset Factory reset resets all parameters to default v alue. The personal d irector y and call logs are als o cleared. Y ou must co nfirm this option before continuing.
3-39 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 3 Manag ing Linksys IP Phones System Administration • <weekday> = 1, 2, 3,..., 7 (for Mon, Tu e, ..., Sun), or 0. If <weekday> is 0, it means the date to start or end daylight savi ng is at exactly the given date.
3-40 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 3 Managing Linksys IP Phones System Admi nistration • Call Forward Busy (*90)—Call forward s on busy . Applies to primary extension o nly: • Cancel Call Forward Busy (*91)—Cancels call forward on busy .
3-41 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 3 Manag ing Linksys IP Phones System Administration • Force G .726r24 (*0272624—Forces G .726r24 for next outboun d call. • Force G .726r32 (*0272632)—Forces G .726r32 for next outbound call.
3-42 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 3 Managing Linksys IP Phones Troubleshooting FAQ Error and Log Reporting The SP A Error Status Code (ESC) is used to indicate the current operation stat us of the SP A unit. An error state can be a relatively long transient state or a steady state.
3-43 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 3 Manag ing Linksys IP Phones Troubleshooting FAQ – If using PoE, verify that the RJ-45 connector is firmly connected to th e switch/wall connection. – If not using PoE, check t he wall socket and confirm that AC power is available.
3-44 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 3 Managing Linksys IP Phones Troubleshooting FAQ.
4-1 Linksys IP Phone Administrator Guide Firmware Version 5.1 CH A P T E R 4 SPA900 Series LCD Command Reference This chapter provi des a systematic reference for th e configuration and monit oring options available fro m the LCD display on SP A900 Series IP phones.
4-2 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 4 SPA900 Series LCD Co mmand Reference 1 Director y 1 Directory The directory stores the list of the pho ne numbers a nd names. This section descri bes how to enter and save phone numbers and names into th e directory .
4-3 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 4 SPA900 Series LCD Command Reference 2 Speed Dial Note Be sure to press the save button after entering i nformation. Otherw ise, the inform ation is no t saved and will not appear in the directory .
4-4 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 4 SPA900 Series LCD Co mmand Reference 4 Ring Tone Redial List Shortcut:: Setup, 3, 1 After selecting this option, th e phone displa ys the call entries in the R edial List.
4-5 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 4 SPA900 Series LCD Command Reference 5 Preferences • 5.1 Block Caller ID • 5.2 Block Anonymo us callers • 5.3 Do Not Di sturb • 5.4 Secure Call • 5.5 Dial Assistance • 5.
4-6 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 4 SPA900 Series LCD Co mmand Reference 5 Preferences From the Preferences menu, press 3 or scroll down until the selection is high lighted and then pr ess the edit soft key .
4-7 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 4 SPA900 Series LCD Command Reference 5 Preferences 5.8 Preferred Audio Device Shortcut: Setup, 5, 6, edit, y/n, ok From the Preferences menu, press 6 for Preferred Audio Device or scroll down unt il the selection is highlighted and th en press edit .
4-8 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 4 SPA900 Series LCD Co mmand Reference 6 Call Forward 6 Call Forward T o view or change th e call forwarding setting, press the Setup button and press the 6 button or u se the arrow button to scrol l down to Call Forward and press the edit soft key .
4-9 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 4 SPA900 Series LCD Command Reference 7 Time/Date Press the edit soft key and the numbe r of seconds to el apse before the phone forwards the call. Calls are forwarded to t he telephone number entered using the CFWD No Ans option after the specified time has elapsed.
4-10 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 4 SPA900 Series LCD Co mmand Reference 9 Network • 9.10 Non DHCP Default Rout e • 9.1 1 Non DHCP DNS 1 • 9.12 Non DHCP DNS 2 • 9.13 Non DHCP NTP Server 1 • 9.14 Non DHCP NTP Server 2 • 9.
4-11 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 4 SPA900 Series LCD Command Reference 9 Network 9.5 Current NetMask Shortcut: Setup, 9, 5 save T o view the Current NetMask, pres s 5 from the Network menu, or scroll down t o highlight NetMask and press the select soft key .
4-12 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 4 SPA900 Series LCD Co mmand Reference 9 Network 9.11 Non DHCP DNS 1 Shortcut: Setup, 9, 11, ip_addr ess , ok T o edit the primar y DNS server used by the phone, press 11 from the Network menu, or scroll down and highlight Non DHCP D NS 1 and press the select soft key .
4-13 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 4 SPA900 Series LCD Command Reference 10 Product Info 9.16 Enable VLAN Shortcut: Setup, 9, 16, y/n, ok T o enable VLAN, press 16 from the Network menu, or scroll down and highlight Enable VLAN and press the select soft key .
4-14 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 4 SPA900 Series LCD Co mmand Reference 11 Status 10.2 Serial Number Shortcut: Setup, 10, 2, select To v i e w t h e S e r i al Number , press 2 from the Product Info menu, or scrol l down to highlight Serial Number and press the select soft key .
4-15 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 4 SPA900 Series LCD Command Reference 11 Status Note On the SP A962 phone, “EXT” appears as “E xt,” and “Line” appe ars as “Line Key .
4-16 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 4 SPA900 Series LCD Co mmand Reference 12 Reboot Call Statistics History Shortcut: Setup, 11, 15 select T o see the call statistics hist ory for your phone, from th e Status menu, scroll to 15 , then press select .
4-17 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 4 SPA900 Series LCD Command Reference 16 Set Password When a user receives an RC unit, the unit obtain s the correct profile for its IT SP using the MAC and server addresses.
4-18 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 4 SPA900 Series LCD Co mmand Reference 20 GUI Properties (SPA962) 5. Select OK and Save .
5-1 Linksys IP Phone Administrator Guide Firmware Version 5.1 CH A P T E R 5 Linksys IP Phone Field Reference This chapter describes the fields within each section of th e following administrati on we.
5-2 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 5 Lin ksys IP Phone Field Re ference Info Tab Info Tab This section descri bes the fields for the foll owing headings on the Inf o.
5-3 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 5 Linksys IP Phone Field Reference Info Tab Phone Status Ext 1/2/3/4/5/6 Status ) Field Description Current T ime Current date and ti me of the system; for ex ample, 10/3/2003 16:43: 00.
5-4 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 5 Lin ksys IP Phone Field Re ference Info Tab Line 1/2/3/4/5/6 Call 1/2 Status Next Registration In Number of seconds before the next registration renewal. M e s sa g e W ai ti n g Indicates whether you have new voicemail wait ing : Y es or No.
5-5 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 5 Linksys IP Phone Field Reference Info Tab Downloaded Ring Tone Round T rip Delay Number of milliseconds for delay . Packets Lost Number of packets lost. Packet Error Number of invalid packets received.
5-6 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 5 Lin ksys IP Phone Field Re ference System Tab System Tab This section descri bes the fields for the foll owing headings on the S.
5-7 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 5 Linksys IP Phone Field Reference System Tab Static IP Settings Note None of the following par ameters apply to the SP A901. PPPoE Settings Note None of the following par ameters apply to the SP A901.
5-8 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 5 Lin ksys IP Phone Field Re ference System Tab VLAN Settings Note None of the following par ameters apply to the SP A901.
5-9 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 5 Linksys IP Phone Field Reference SIP Tab SIP Tab This section descri bes the fields for the foll owing headings on the SIP t ab:.
5-10 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 5 Lin ksys IP Phone Field Re ference SIP Tab Remove Last Reg Lets you remove the last registration befor e registering a new one if the value i s different . Select yes or no from the drop-d own menu.
5-11 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 5 Linksys IP Phone Field Reference SIP Tab SIP Timer Values (sec) Note None of the following par ameters apply to the SP A901. Field Description SIP T1 RFC 3261 T1 value (R TT estimate), which can range from 0 to 64 se conds.
5-12 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 5 Lin ksys IP Phone Field Re ference SIP Tab Reg Retry R andom De lay Random del ay range (in s econd s) to ad d to <Reg ister Retry Intvl> wh en retryin g REGISTER after a failure.
5-13 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 5 Linksys IP Phone Field Reference SIP Tab Response Status Code Handling RTP Parameters Field Description SIT1 RSC SIP response status code for the appropri ate Specia l Information T o ne (SIT).
5-14 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 5 Lin ksys IP Phone Field Re ference SIP Tab SDP Payload Types The configured dynamic p ayloads are used for outbound calls only where the Linksys IP phone presents the SDP offer .
5-15 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 5 Linksys IP Phone Field Reference SIP Tab INFOREQ Dynamic Payload (not applicable to SP A901) INFOREQ dynamic payload type. Defaults to blank. G726r16 Dynamic Pay load G .726 -16 dynamic payload type.
5-16 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 5 Lin ksys IP Phone Field Re ference SIP Tab NAT Support Parameters Note None of the following par ameters apply to the SP A901. G729a Codec Name (not applicable to SP A901) G .729a codec name used in SDP .
5-17 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 5 Linksys IP Phone Field Reference SIP Tab Linksys Key System Parameters STUN Enable Enable s the us e of STUN to discover NA T mapping. Select yes or no from the drop-down menu. Defaults to no.
5-18 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 5 Lin ksys IP Phone Field Re ference Provisioning Tab Provisioning Tab For information ab out the Provision ing page, see the Linksys SP A Pr ovisi oning Guide .
5-19 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 5 Linksys IP Phone Field Reference Regional Tab Regional Tab This section descri bes the fields for the foll owing headings on t .
5-20 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 5 Lin ksys IP Phone Field Re ference Regional Tab Distinctive Ring Patterns Note None of the following par ameters apply to the SP A901. Confirm T one Brief tone to notify the user th at the last input value has been accepted.
5-21 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 5 Linksys IP Phone Field Reference Regional Tab Control Timer Values (sec) Field Description Cadence 1 Cadence script for distinct iv e ring 1. De f a u l t s t o 60 (2/4). Cadence 2 Cadence script for distinct iv e ring 2.
5-22 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 5 Lin ksys IP Phone Field Re ference Regional Tab Vertical Service Activation Codes The following Vertical Service Activation Codes are au tomatically appe nded to the dial-plan. Note Some of the following paramet ers do not apply to the SP A901.
5-23 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 5 Linksys IP Phone Field Reference Regional Tab Cfwd No Ans A ct Code Forwards no- answer calls to the ex tensi on specif ied afte r the acti vation c ode. Defaults to *92. Cfwd No Ans Deact Code Cancels call forwarding of no-answer calls.
5-24 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 5 Lin ksys IP Phone Field Re ference Regional Tab Secure One Call Act Code Makes the next outbound call secure. (It is redundant if all outbound calls are secure by default.) Defaults to *18.
5-25 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 5 Linksys IP Phone Field Reference Regional Tab Vertical Service Announcement Codes Note None of the following par ameters apply to the SP A901. • Service Annc (Annoucement) Base N umber: Defaults to blank.
5-26 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 5 Lin ksys IP Phone Field Re ference Regional Tab Note None of the following par ameters apply to the SP A901. Field Description Prefer G71 1u Code Makes this codec the preferred codec for the a ssociated call.
5-27 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 5 Linksys IP Phone Field Reference Regional Tab Miscellaneous Note Only the first four parameters apply to the SP A901: • Set L.
5-28 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 5 Lin ksys IP Phone Field Re ference Regional Tab Daylight Saving T ime Rule Enter the rule for calculating dayl ight saving time; it should include the start, end, and save values.
5-29 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 5 Linksys IP Phone Field Reference Regional Tab Dictionary Server Script Defines the location of t he dict ionary server , the language s available and the associated dictionary .
5-30 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 5 Lin ksys IP Phone Field Re ference Phone Tab Phone Tab This section descri bes the fields for the followi ng headings on the Ph.
5-31 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 5 Linksys IP Phone Field Reference Phone Tab Miscellaneous Line Key Settings This section does not appl y to the WIP310 wireless phone. Line Key LED Pattern Line key LED colors are described in “Line Key LEDs” section on page 3-22 .
5-32 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 5 Lin ksys IP Phone Field Re ference Phone Tab Remote Undefined LED LED pattern during the Remote Undefined state, where th e shared call st ate is undefine d (the station is still waiting for the state informat ion from the application server).
5-33 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 5 Linksys IP Phone Field Reference Phone Tab Supplementary Services Enable or disable the corresp onding supplementary se rvi ces on the phone. A value of “yes” indi cates enabled; “no” i ndicates disa bled.
5-34 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 5 Lin ksys IP Phone Field Re ference Phone Tab Ring Tone Each entry defines a ring tone to be used on the phone, with an ID between 1 and 10. The ID can be used in a DirEnt ry to indica te whic h ring tone to use when the corresponding caller ca lls.
5-35 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 5 Linksys IP Phone Field Reference Phone Tab Auto Input Gain (dB) This section does not appl y to the WIP310 wireless phone. Extension Mobility Note Some of the parameters in this section do not appl y to the WIP310 wi reless phone.
5-36 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 5 Lin ksys IP Phone Field Re ference Ext Tab Ext Tab The Ext tabs vary by phone: • SP A901: Ext 1 tab • SP A942 : Ext 1, 2, 3.
5-37 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 5 Linksys IP Phone Field Reference Ext Tab Share Line Appearance NAT Settings Network Settings Note Some of the parameters in this section do not appl y to the WIP310 wi reless phone.
5-38 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 5 Lin ksys IP Phone Field Re ference Ext Tab SIP Settings Note Some of the paramet ers in this section do not appl y to the WIP310 wireless phone. Only t he SIP Port and SIP Debug Option pa rameters apply to the SP A901.
5-39 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 5 Linksys IP Phone Field Reference Ext Tab Auth Resync-Reboot If this feature is enabled, the Linksy s IP phone au then tic ate s the se nder when it receives the NOTIFY resyn c reboot (RFC 26 17) message.
5-40 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 5 Lin ksys IP Phone Field Re ference Ext Tab Call Feature Settings Note Many of the following paramete rs do not apply to th e SP A901. SIP Debug Option SIP messages are received at or s e nt from the proxy listen po rt.
5-41 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 5 Linksys IP Phone Field Reference Ext Tab Proxy and Registration Note Many of the following para meters do not apply to the SP A901. MOH Server User ID or URL of the auto-a nswering streaming audio server .
5-42 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 5 Lin ksys IP Phone Field Re ference Ext Tab Field Description Proxy SIP proxy server and port nu mber set by the Service Provider for all outbound requests. Fo r e x a m p l e : 192.
5-43 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 5 Linksys IP Phone Field Reference Ext Tab Subscriber Information Note Many of the following para meters do not apply to the SP A901.
5-44 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 5 Lin ksys IP Phone Field Re ference Ext Tab call actually uses G .729a. If the G .
5-45 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 5 Linksys IP Phone Field Reference Ext Tab A codec resource is considered allocated if it has been included in the SDP codec list of an acti ve call, even though it eventually mi ght not be chosen for the connecti on.
5-46 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 5 Lin ksys IP Phone Field Re ference Ext Tab Dial Plan Note The following parameters do not app ly to the SP A901. The default dial plan script fo r each line is as follows: (*xx|[3469]1 1|0|00|[2-9]xxxxxx|1x xx[2-9]xxxxxx|xxxx xxxxxxxx.
5-47 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 5 Linksys IP Phone Field Reference Ext Tab Field Description Dial Plan Dial plan scri pt for this line.
5-48 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 5 Lin ksys IP Phone Field Re ference User User This section descri bes the fields for the followi ng headings on the User tab: .
5-49 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 5 Linksys IP Phone Field Reference User Web Information Service Settings (SPA962) Note The following parameters apply only to the SP A962. . Traffic Service Information Settings (SPA962) Note The following parameters apply only to the SP A962.
5-50 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 5 Lin ksys IP Phone Field Re ference User Audio Volume Note Many of the following paramete rs do not apply to th e SP A901. Phone GUI Menu Color Settings (SPA962 only) Note The following parameters apply only to the SP A962.
5-51 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 5 Linksys IP Phone Field Reference 932 Tab (SPA962 only) 932 Tab (SPA962 only) This tab includes the fol lowing sections: • Gen.
5-52 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 5 Lin ksys IP Phone Field Re ference 932 Tab (SPA962 only) Unit 1 Field Description Unit 1 Key 1-32 This field lets you enter a string that defines the ex tension and ot her paramet ers associat ed with each lighted butto n on the first SP A932 unit.
5-53 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 5 Linksys IP Phone Field Reference 932 Tab (SPA962 only) Unit 2 Field Description Unit 2 Key 1-32 See the description for Unit 1.
5-54 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 5 Lin ksys IP Phone Field Re ference SPA932 Status SPA932 Status This page provides two tabs to display t he status of up to two SP A932 units that are supported by a single SP A962: • Unit 1—Displays information abo ut the first SP A932 sidecar unit.
A-1 Linksys IP Phone Administrator Guide Firmware Version 5.1 APPENDIX A Acronyms A/D Analog T o Digital Converter ANC Anonymous Call B2BUA Back to Back User Agent BLF Busy Lamp Fie ld Bool Boolean V alues.
A-2 Linksys IP Phone Administrator Guide Firmware Version 5.1 Appendix A Acronyms FXS Foreign eXchange S tation GW Gateway ITU International T elecommunicatio n Union HTML Hypertext Markup Lang uage H.
A-3 Linksys IP Phone Administrator Guide Firmware Version 5.1 Appendix A Acronyms SDP Session Description Protocol SDRAM Sync hronous DRAM sec seconds SIP Session Initiati on Protocol SLA Shared line .
A-4 Linksys IP Phone Administrator Guide Firmware Version 5.1 Appendix A Acronyms.
B-1 Linksys IP Phone Administrator Guide Firmware Version 5.1 APPENDIX B Glossary ACD (Automatic Call Distribu tion)—A swi tching system designed to allocate inco ming calls to certain positions or agents in the ord er received and to hold calls not ready to b e handled (often with a recorded announcement).
B-2 Linksys IP Phone Administrator Guide Firmware Version 5.1 Appendix B Glossary Dedicated Access Line (DAL)—Prov ided by the local exchange carri er . An a ccess line from the customer ’ s telephone equipment directly to the long-distance compan y’ s switch or POP .
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Linksys SPA 900 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Linksys SPA 900 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Linksys SPA 900, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Linksys SPA 900 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Linksys SPA 900, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Linksys SPA 900.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Linksys SPA 900. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Linksys SPA 900 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
