Manuel d'utilisation / d'entretien du produit CD203 du fabricant Lenoxx Electronics
Aller à la page of 19
IB-CD203(AD)-WM-E-012503 PLA YS MUSIC COMP ACT DISCS FULL Y PROGRAMMABLE CD PLA YER WITH REPEA T RECEIVES AM/FM STEREO BROADCASTS RECORDS FROM CD, RADIO, OR BUIL T-IN MICROPHONE FM.
IB-CD203(AD)-WM-E-012503 TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THE PLUG WITH AN EXTENSION CORD, RECEPT ACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULL Y INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
IB-CD203(AD)-WM-E-012503 ADDITIONAL SAFETY INSTRUCTIONS 1 . Power Sources - The appliance should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance. 2 . Wall or Ceiling Mounting - The appliance should not be mounted to a wall or ceiling.
IB-CD203(AD)-WM-E-012503 CAUTION: TO REDUCE THE RISK OF FIRE OR PERSONAL INJURY OR DAMAGE TO YOUR SET , READ AND FOLLOW THESE INSTRUCTIONS. BA TTER Y SAFETY INSTRUCTIONS 1. Use only the type and size of batteries mentioned in the operating instructions booklet (batteries are not included with this set, please buy the proper batteries).
IB-CD203(AD)-WM-E-012503 Y ou can use the AC power or batteries as a power source. 4 T o a wall outlet Replace the batteries when the POWER lamp dims or when the player stops operating.
IB-CD203(AD)-WM-E-012503 1 3 4 2 Connect the supplied AC power cord or batteries (refer to page 4). Track number PLA Y/PROG. lamp PLA YING A CD 5 POWER lamp POWER lamp Rotate the FUNCTION switch to CD position (power on), the POWER lamp will be on. Lift the right corner of the CD DOOR to open it and place a CD in the CD compartment.
IB-CD203(AD)-WM-E-012503 To Press or Adjust Adjust the volume VOLUME control Stop playback Pause playback Go to the next track Go back to the previous track Locate a point in a song When CD play is paused, the track number current playing will flash and no music will play .
IB-CD203(AD)-WM-E-012503 T o repeat Press a single track (song) Display shows programmed tracks REP EA T PLA Y/ PRO G. Y ou can play CD tracks over and over in normal or programmed play mode (refer to page 8). PLA YING CD TRACKS REPEA TEDL Y (REPEA T PLA Y) 1.
IB-CD203(AD)-WM-E-012503 PLA YING CD TRACKS IN PROGRAMMED OR RANDOM ORDER T o change the current program Just create a new program following the programming procedure. T o cancel Programmed Play Press the STOP button, then rotate the FUNCTION switch to T APE position.
IB-CD203(AD)-WM-E-012503 1 2 3 Tune into the station you prefer using the TUNING control. Adjust for the clearest sound. 4 This indicator will light up when receiving an FM Stereo broadcast. 9 LISTENING TO THE RADIO Connect the supplied AC power cord or batteries (refer to page 4).
IB-CD203(AD)-WM-E-012503 To Rotate or Adjust Adjust the volume Turn off the Radio • Next time you want to listen to the radio, just rotate the FUNCTION switch to RADIO position. The player will automatically start playing the previously tuned station.
IB-CD203(AD)-WM-E-012503 PLA YING A T APE 2 3 Rotate the FUNCTION switch to T APE position. 1 4 When the set finishes playing this side of the tape, the set will automatically stop. T o hear the other side of the tape, flip the tape over , then insert and press PLA Y .
IB-CD203(AD)-WM-E-012503 RECORDING ON A T APE 1 2 T o hear what you recorded, rotate the FUNCTION switch to T APE position, then press REWIND and PLA Y . 12 FULL REEL EMPTY REEL T APE PLA Y DIRECTION A OK NO OK NO Press the STOP/EJECT button to open the tape compartment and insert a blank tape.
IB-CD203(AD)-WM-E-012503 To Press or Adjust Adjust the volume T o enjoy the music without disturbing others Insert your headphone plug into the PHONES jack (HEADPHONE not included) 13 T o shut power o.
IB-CD203(AD)-WM-E-012503 PRECAUTIONS 14 On Operation If the player is brought directly from a cold to a warm location, or is placed in a very damp room, moisture may condense on the lens inside the CD player section. Should this occur , the player will not operate properly .
IB-CD203(AD)-WM-E-012503 T o record on a tape with its tab broken off, cover the respective tab hole for side A or B with adhesive tape. Use of a cassette with more than 90 minutes, such as C-120 (120 minutes), is not recommended. The extreme thinness of this tape may damage this set.
IB-CD203(AD)-WM-E-012503 Cleaning the Cabinet Clean the cabinet, panel and controls with a soft cloth slightly moistened with a mild detergent solution.
IB-CD203(AD)-WM-E-012503 TROUBLE SHOOTING Problem Remedy The power is not on. There is no sound. Make sure the FUNCTION switch is at the right position as you want. Adjust the volume. Unplug the headphones when listening through speakers. appears in the display even when a CD is in place.
IB-CD203(AD)-WM-E-012503 General Description Power source: Speakers: 2 - 3 1 / 2 8 ohm Output power: 1.5W/channel Dimensions: AM: Lenoxx reserves the right to make design and specification changes for product improvement.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Lenoxx Electronics CD203 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Lenoxx Electronics CD203 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Lenoxx Electronics CD203, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Lenoxx Electronics CD203 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Lenoxx Electronics CD203, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Lenoxx Electronics CD203.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Lenoxx Electronics CD203. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Lenoxx Electronics CD203 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
