Manuel d'utilisation / d'entretien du produit BP-103 du fabricant Lenoxx
Aller à la page of 20
® COMP ACT DISC PLA YER PLA YS MUSIC COMP ACT DISCS FULL Y PROGRAMMABLE CD PLA YER WITH REPEA T RECEIVES TV BAND AND WEA THER BAND RECEIVES AM/FM BROADCASTS RECORDS FROM CD, RADIO, OR BUIL T -IN MICR.
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THE PLUG WITH AN EXTENSION CORD, RECEPT ACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULL Y INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
2 ADDITIONAL SAFETY INSTRUCTIONS 1 . Power Sources - The appliance should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance. 2 . Wall or Ceiling Mounting - The appliance should not be mounted to a wall or ceiling.
1 . Use only the type and size of batteries mentioned in the operating instructions manual (batteries are not included with this set, please buy the proper batteries). 2 . Do not dispose the batteries into a fire. The cells may explode. Check with local codes for possible special disposal instructions.
CHOOSING THE POWER SOURCES Y ou can use the AC power or batteries as a power source. 4 T o a wall outlet NOTE: One blade of plug and outlet is wider . AC SOCKET Battery compartment IB-CD103(SY)-WM-E-090402 1 .
1 Slide the FUNCTION switch to CD position (power on), the POWER lamp will be on. And the display will show 2 dashes flashing , then . 3 Close the CD DOOR by pushing it down. The display will show the total tracks on that CD. 4 1 2 & 3 Lift the right corner of the CD DOOR to open it and place the CD in the CD compartment.
USE THESE BUTTONS FOR ADDITIONAL OPERA TIONS T o Press or Adjust Adjust the volume VOLUME control Stop playback Pause playback The PLA Y lamp will flash during pause.
LISTENING TO THE RADIO Connect the supplied AC power cord or batteries (see page 4). Slide the FUNCTION switch to RADIO position, the POWER lamp will be on. 1 2 3 1 2 3 Slide the BAND switch to the proper band position (AM, FM, or TV1, TV2 (WEA THER BAND)) that you want.
USE THESE BUTTONS FOR ADDITIONAL OPERA TIONS To Slide or Adjust Adjust the volume VOLUME control TIP • Next time you want to listen to the radio, just slide the FUNCTION switch to RADIO.The player automatically starts playing the pre- viously tuned station.
PLA YING A T APE Connect the supplied AC power cord or batteries (see page 4). Press the STOP/EJECT button to open the tape compartment and insert a recorded tape. Close the door . 3 2 2 3 Press the PLA Y button. The player turns on and starts playing.
USE THESE BUTTONS FOR ADDITIONAL OPERA TIONS To Stop playback Eject the cassette Press or Adjust Adjust the volume VOLUME control Fast forward or rewind the tape F AST FOR W ARD button or REWIND button Pause playback P AUSE button Press again to resume play after pause.
RECORDING ON A T AP E Connect the supplied AC power cord or batteries (see page 4). Press the STOP/EJECT button to open the tape compartment and insert a blank tape. Select the program source (AM, FM, TV1, TV2, CD, or , built-in microphone) you want to record.
USE THESE BUTTONS FOR ADDITIONAL OPERA TIONS To Turn off the power Press the STOP/EJECT button and slide the FUNCTION switch to T APE position. TIP Press or Adjust Stop recording STOP/EJECT button P AUSE button Press the button again to resume recording.
PLA YING CD TRACKS REPEA TEDL Y (REPEA T PLA Y) 1. Slide the FUNCTION switch to CD position. 2. Select the track by pressing or , and then press . 3. Press the CD REPEA T button. T o repeat Press a single track (song) Press the REPEA T button once, the REPEA T lamp will flash.
Programmed Play PROGRAM 14 PL A YING CD TRACKS IN PROGRAMMED ORDER T o change the current program Just create a new program following the Programming procedure. Y ou can make a program of up to 16 tracks in the order you want them to be played. PROGRAM REPEA T IB-CD103(SY)-WM-E-053002 1 .
PRECAUTIONS On Safety As the laser beam used in the CD player section may be harmful to the eyes, do not attempt to disassemble the cabinet. Refer servicing to qualified personnel only . Should any solid object or liquid fall into the player , unplug the player , and have it checked by qualified personnel before operating it any further .
PRECAUTIONS (continued) Notes on CDs Before playing, clean the CD with a cleaning cloth. Wipe the CD from the center out. Do not use solvents such as benzene, thinner , commercially available cleaners or anti-static spray intended for vinyl LPs.
MAINTENANCE Cleaning the Lens If the lens becomes dirty , it may cause a skipping of sound during CD operation. Clean with a commercially available lens cleaner and blower .
TROUBLE SHOOTING Problem Remedy The power is not on. Connect the AC power cord to a wall outlet securely . Make sure the batteries are inserted correctly and they are fresh. There is no sound. Make sure the FUNCTION switch is in the correct position.
SPECIFICA TION General Description Power source: AC 120V , 60Hz 12 Watts DC 9V (6 size C batteries) (Alkaline batteries are recommended) Speakers: 2 - 3 1 / 2 8 ohm Output power: 1.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Lenoxx BP-103 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Lenoxx BP-103 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Lenoxx BP-103, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Lenoxx BP-103 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Lenoxx BP-103, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Lenoxx BP-103.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Lenoxx BP-103. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Lenoxx BP-103 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
