Manuel d'utilisation / d'entretien du produit 1550 du fabricant Keys Fitness
Aller à la page of 31
Owner’ s Manual Read all precautions and instruc- tions in this manual before using this equipment. 215-00008 09/04 Rev B.
T able of Contents 2 Important Safety Information 3 Before Y ou S tart 4 Assembly 5-23 W eight Ratios 24 W eight S tack S ticker Placement 25 Cable V iew 26 T op V iew 27 Exploded V iew 28 Parts List .
Impor tant Safety Inf or ma tion 3 THANK YOU for making this Power System unit a part of your exercise pro- gram. Keys Fitness and our Power System Series assures the very best in value, appearance, durability and biomechanics. This manual will guide you through the assembly process.
Bef or e Y ou Star t 4 Prior to assembly , remove components from the box and verify that all the listed parts were supplied. SAFETY INFORMA TION WARNING! Before using this unit or starting any exercise program, consult your physician. This is especially important for persons over the age of 35 and/or persons with pre-existing health problems.
Assembl y 5 Box 1.
Assembl y 6 Box 2.
Assembl y 7 Box 3 Box 5 Box 6 Box 4.
Assembl y 8.
Assembl y 9.
STEP 1 Insert the two Guide Rods (14) into Rear Base (3) and secure them in place using two W ashers (91), two Spring W ashers (89), and two Allen Bolts (86).
Assembl y 11 STEP 2 Slide Seat Pad Support Receptacle (1) onto Rear Base (3) and secure in place using three Nylon Locknuts (93), six W ashers (91), and three Bolts (80). Connect Front Upright (5) onto Seat Pad Support Receptacle (1) and secure together using two Nylon Locknuts (93), four W ashers (91), and two Bolts (79).
Assembl y 12 S tep 3 Install the Main Upright (2) onto the Seat Pad Support Receptacle (1). Secure it in place using three Nylon Locknuts (93), six W ashers (91), and three Bolts (80) on the side. T wo Bolts (87), one Spring W ashers (88), three W ashers (90), one Nylon Locknut (92) will secure it at the bottom.
Assembl y 13 S tep 4 Slide one W eight Stack Bumper (62) down each Guide Rod (14). Next, slide the weight plates down the Guide Rods (14) in this order - five 15lb Plates (15), nine 10lb Plates (16), five 5lb Plates (17), and the T op Plate (18). Insert the Main T op Beam (4) onto the two Guide Rods (14) and the Main Upright (2).
S tep 5 Attach Press Arm Support (6) to Main Upright (2) by aligning the holes and sliding the Shaft (19) through. Secure the Shaft (19) in place using two Set Screws (50). Install Press Arm (7) to Press Arm Support (6) by aligning the holes and sliding the Shaft (21) through.
Assembl y 15 S tep 6 Slide Long Foam T ube (1 1) into the hole towards the lower part of the Main Upright (2). Slide the Shaft (44) into top of the Leg Extension Lever (8). Attach Leg Extension Lever (8) to Seat Pad Support Receptacle (1) and secure using one W asher (46), one Spring W asher (47), and one Allen Bolt (48).
Assembl y 16 S tep 7 Install Seat Pad (25) onto Seat Pad Support (9) using two W ashers (91) and two Allen Bolts (85). Slide the Seat Pad Support assembly into Seat Pad Support Receptacle (1) and secu.
Assembl y 17 S tep 8 Install a Plastic W asher (69) onto each side of the Long Foam T ube (1 1). Next, install Upholstered Roller Pad (27) onto each side of Long Foam T ube (1 1) and secure in place using Big Plug (68). Repeat the above step for the Seat Pad Support (9).
Assembl y 18 S tep 9 Note: Stretch all cables out completely and make sure all twisting is removed before installing. Install Chest Press Cable (76) as detailed in Figure 9. Follow dotted lines to identify exact location of pulleys. Start by threading cable end into T op Plate (18).
Assembl y 19 S tep 10 Note: Stretch all cables out completely and make sure all twisting is removed before installing. Install Mid Pulley Cable (77) as detailed in Figure 10. Follow dotted lines to identify exact location of pulleys. Start by installing cable under the pulley at Leg Extension location.
Assembl y 20 S tep 1 1 Note: This step is only used if you do not have the Leg Press 2 attachment. Use the Cable Adapter (70) in place of the pulley . Note: Stretch all cables out completely and make sure all twisting is removed before installing. Install Leg Press Cable Substitute (78) as detailed in Figure 1 1.
Assembl y 21 S tep 12 Connect Long Lat Bar (22) to the Chest Press Cable (76) using two Gear Hooks (37) and Short Chain (36). Connect Ab S trap (32) to Mid Pulley Cable (77) using one Gear Hook (37). Connect Short Lat Bar (23) to Mid Pulley Cable (77) using two Gear Hooks (37) and Long Chain (35).
Assembl y 22 S tep 13 Install W eight Shrouds (20) to each side of the Main T op Beam (4) using two W ashers (91), two Spring W ashers (89), and Allen Bolts (86 & 48). Secure the bottom portion of the W eight Shrouds (20) to the Rear Frame (3) using two W ashers (46) and two Allen Bolts (48).
Assembl y 23 Congratulations! Y ou have completed the assembly of your new KPS-1550..
W eight Ratios 24 KPS-1550 Wei g ht(lbs) 100% 95% 90% 65% 45% 10 10 9.5 9 6.5 4.5 15 15 14.25 13.5 9.75 6.75 20 20 19 18 13 9 25 25 23.75 22.5 16.25 11.25 30 30 28.5 27 19.5 13.5 35 35 33.25 31.5 22.75 15.75 45 45 42.75 40.5 29.25 20.25 55 55 52.25 49.
W eight Stack Stic k er Placement 25 10 10 15 20 20 25 30 40 50 60 70 80 90 100 30 35 45 55 65 75 85 95 105 11 5 11 5 125 140 155 170 130 145 160 175 190 205 220 235 250 185 200 200 LB S t ack 250 LB S t ack Y our new POWER SYSTEM unit can be purchased with either a 200 LB or 250 LB weight stack.
Cable V iew 26.
T op V iew 27.
Exploded V iew 28.
REF# KEYS PART# DESCRIPTION QTY. REF# KEYS PART# DESCRIPTION QTY. 1 223-00254 Seat Pad Support Receptacle 1 50 202-00143 Screw M8*6 5 2 223-00255 Main Upright 1 51 202-00154 Allen Bolt M8*35 1 3 223-0.
W ar r anty Infor ma tion KEY S FITNESS PRODUCTS, L.P . POWER SY STEM SERIES LIFETIME WARRANTY This W arranty applies in the United S tates and Canada to products manufactured or distributed by Keys Fitness Products, LP (“Keys”) under the KEYS brand name.
Customer Service 1.888.340.0482 Keys Fitness 4009 Distribution Drive Suite 250 Garland, TX 75041 www .keysfitness.com.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Keys Fitness 1550 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Keys Fitness 1550 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Keys Fitness 1550, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Keys Fitness 1550 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Keys Fitness 1550, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Keys Fitness 1550.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Keys Fitness 1550. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Keys Fitness 1550 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
