Manuel d'utilisation / d'entretien du produit KDC-WV6027 du fabricant Kenwood
Aller à la page of 36
KDC-W6027 KDC-WV6027 CD-RECEIVER INSTR UCTION MANU AL © B64-2704-00/00 (EN/E2N/EW/E2W) B64-2704-00_U.S(E).Indd 1 03.11.6, 8:49:42 PM.
2 | English Con t ents Sa fe ty precautions 3 Notes 5 Notes on playing MP3/WMA 6 A bout CDs 8 G eneral fea tures 9 Pow er Selecting the Source Volume System Q A udio Control Speaker Setting Subwoofer .
English | 3 Sa fe ty precautions 2 CA UTION To pr event damage to the machine , take the following precautions: • Make sure to gr ound the unit to a negative 12V DC power supply . • Do not open the top or bottom cov ers of the unit. • Do not install the unit in a spot exposed to dir ect sunlight or excessive heat or humidity .
4 | English Sa fe ty precautions NO TE • If you experience problems during installation, consult your Kenwood dealer . • If the unit fails to operate properly , press the Reset button. The unit returns to factory settings when the Reset button is pressed.
English | 5 Notes Cleaning the Unit If the faceplate of this unit is stained, wipe it with a dry sof t cloth such as a silicon cloth. If the faceplate is stained badly , wipe the stain off with a cloth moistened with neutral cleaner , then wipe neutral detergent off .
6 | English Notes on playing MP3/WMA Note, however , that the MP3/WMA recording media and formats acceptable are limited . When writing MP3/WMA, pay attention to the f ollowing restrictions. A cce ptable media The MP3/WMA recor ding media acceptable to this unit are CD-ROM, CD-R, and CD -RW.
English | 7 MP3/WMA playing order When selected for play , F older Search, File Sear ch, or for F older Select, files and folders are accessed in the order in which they were written by the CD writer . Because of this, the order in which they ar e expected to be played may not match the or der in which they are actually played.
8 | English Handling CDs • Don ’t touch the recor ding sur face of the CD . • CD-R and CD-R W are easier to damage than a normal music CD. Use a CD-R or a CD-R W after r eading the caution items on the package etc. • Don ’t stick tape etc. on the CD .
English | 9 G eneral f eatures Powe r Tu rning ON the Pow er Pr ess the [SRC] button. • When the power is ON, the 'Security Code' (page 22) is displayed as "CODE ON" or "C ODE OFF" . Tu rning OFF the Pow er Pr ess the [SRC] button for at least 1 second.
10 | English G eneral f eatures Syst em Q Y ou can recall the best sound setting preset for different types of music. 1 S elect the source to set Pr ess the [SRC] button. 2 S elect the Sound type Pr ess the [Q] butt on. Each time the button is pressed the sound setting switches.
English | 11 Subw oofer Output Tu rning the Subwoof er output ON or OFF . Pr ess the [SW ] button for at least 1 sec ond. Each time the button is pressed Subwoof er output switches ON or OFF .
12 | English G eneral f eatures A uxiliary Input Display Setting S electing the display when this device is switched to A uxiliary input source. 1 S elect Auxiliary input source Pr ess the [SRC] button. Select the " AUX EXT " display . 2 Enter Auxiliary input display setting mode Pr ess the [DISP] button for at least 2 seconds .
English | 13 T uner featur es T uning S electing the station. 1 S elect tuner source Pr ess the [SRC] button. Select the " TUNER" display . 2 S elect the band Pr ess the [FM] or [AM] butt on. Each time the [FM] button is pr essed it switches between the FM1, F M2, and FM3 bands.
14 | English T uner featur es Au to Memor y Entry P utting a station with good reception in the memory automatically. 1 S elect the band for Auto Memory Entry Pr ess the [FM] or [AM] butt on. 2 Enter Menu mode Pr ess the [MENU] button for at least 1 second .
English | 15 RDS featur es Tr affic Information S witching to traffic inf ormation automatically when a traffic bulletin starts even when you aren ’t listening to the radio . Pr ess the [ TI] button. Each time the button is pressed the Traffic In for mation func tion turns ON or OFF .
16 | English RDS featur es PTY (Progr am T ype) S electing the Program Type and searching f or a station. 1 Enter PTY mode Pr ess the [PTY ] button. During PT Y mode the "PT Y" indicator is ON. • This function can’t be used during a traffic bulletin or AM r eception.
English | 17 Changing Language for PTY Function S electing the Program Type display language . 1 Enter PTY mode Refer to 'PTY (Program Type)' (page 16). 2 Enter Changing Language mode Pr ess the [DISP] button. 3 S elect the language Pr ess the [FM] or [AM] butt on.
18 | English CD/MP3/WMA/External disc control f eatures Playing CD & MP3/WMA W hen there is no disc inserted 1 Drop open the faceplate Pr ess the Release button. 2 I nsert a disc. 3 Pr ess the faceplate on the left side, and r eturn it to its former position.
English | 19 • The MP3/WMA media that this unit can play are CD- R OM, CD-R, and CD-R W . The medium formats must be ISO 9660 Level 1, L evel 2, Joliet, or Romeo. The methods and precautions to be followed f or writing MP3/WMA data are covered in 'Notes on playing MP3/WMA ' (page 6).
20 | English CD/MP3/WMA/External disc control f eatures Sc an Play Playing the first part of each song on the disc or MP3/WMA folder y ou are listening to and searching for the song y ou want to listen to. 1 S tart Scan Play Pr ess the [SCAN] button. "Scan ON" is displayed.
English | 21 2 Enter name set mode Pr ess the [NAME.S] button for at least 2 seconds. "NAME SET " is displayed . 3 Move the cursor to the enter char acter position Pr ess the [ 4 ] or [ ¢ ] button. 4 S elect the character type Pr ess the [ 38 ] button.
22 | English Menu system Menu Sy stem S etting during operation beep sound etc. functions. T he Menu system basic operation method is explained here. The reference f or the Menu items and their setting content is after this operation explanation. 1 Enter Menu mode Pr ess the [MENU] button for at least 1 second .
English | 23 y our "Car Audio P assport" in this pack age. 1 Enter Standby Pr ess the [SRC] button. Select the "ST ANDBY" display. 2 Enter Menu mode Pr ess the [MENU] button for at least 1 second . When "MENU" is displayed , "Securit y" is displayed .
24 | English Menu system S ynchr onize Clock S ynchronizing the RDS station time data and this unit’ s clock. Display Setting "SYNC ON" Synchr onizes the time. "SYNC OFF" Adjust the time manually . • It takes 3 to 4 minutes to synchronize the clock.
English | 25 Co nt r ast A djustment A djusting the display contrast. D isplay and Setting "Con trast 0" … "Con trast 5" (Original setting) … "Con trast 10" Dimmer Dimming this unit’ s display automatically when the vehicle light switch is turned ON.
26 | English Menu system AF (A lternative F requency) When poor reception is experienced , automatically switch to another frequency broadcasting the same program in the same RDS network with better reception. Display Setting " AF ON" The AF function is ON.
English | 27 "OFF 20MIN" (O riginal setting) T urns the power OFF after 20 minutes . "OFF 40MIN" T urns the power OFF after 40 minut es. "OFF 60MIN" T urns the power OFF after 60 minut es. • This setting is done after setting 'Security Code' (page 22).
A cc essories/ Installa tion Procedur e A cc essories ➀ ..........1 ➁ ..........2 ➂ ..........1 ➃ ..........1 ➄ ..........1 ➅ ..........2 Installation Proc edure 1. T o prevent short circuits, remove the key from the ignition and disconnect the - ter minal of the battery.
1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 TEL MUTE P.CONT ANT.CONT FRONT C onnecting W ires to T erminals Rear right output (Red)/ Subwoofer right output (Red) Rear left output ( White)/ Subwoofer left output (.
C onnecting W ires to T erminals C onnector F unc tion Guide P in Numbers for ISO Connectors C able Colour F unctions External Power Connector A-4 Y ellow Battery A-5 Blue/White Power Control A-6 Oran.
Installation Sc re wing the F acepla te on the Unit If y ou want to fasten the fac eplate to the main unit so that it does not fall off . 1 Refer to the section 'Removing the hard rubber frame' (page 32) and then remove the hard rubber frame.
Removing the Unit Removing the hard rubber frame 1 Engage the catch pins on the removal tool and r emove the two locks on the upper level . Upper the frame and pull it forward as shown in the figure. 2 When the upper level is removed , remove the lower two locations.
Tr oubleshooting Guide What might seem to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Befor e calling ser vice , first check the f ollowing table f or possible problems. G eneral ? T he pow er does not turn ON.
Disc source ? "A UX EXT" is displayed without achieving External disc control mode. ✔ Unsupported disc changer is connected. ☞ Use the disc changer mentioned in the ' About CD players/disc changers connected to this unit' (page 4) of the sec tion on 'Safety precautions' .
T he messages shown below displa y your systems condition. EJ ECT: No disc magazine has been loaded in the changer . The disc magazine is not completely loaded. ➪ L oad the disc magazine properly. No CD in the unit. ➪ I nsert the CD. No Disc: No disc has been loaded in the disc magazine.
Specifications subject to change without notice. FM tuner section Fr equenc y range (50 kHz space) : 87.5 MHz – 108.0 MH z Usable sensitivity (S/N = 26dB) : 0.7 µV /75 Ω Quieting Sensitivity (S/N = 46dB) : 1.6 µV /75 Ω Fr equenc y response (±3.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Kenwood KDC-WV6027 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Kenwood KDC-WV6027 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Kenwood KDC-WV6027, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Kenwood KDC-WV6027 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Kenwood KDC-WV6027, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Kenwood KDC-WV6027.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Kenwood KDC-WV6027. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Kenwood KDC-WV6027 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
