Manuel d'utilisation / d'entretien du produit KDC-W6527SE du fabricant Kenwood
Aller à la page of 44
KDC-W6527SE KDC-W6527 KDC-W657 CD-RECEIVER INSTR UCTION MANU AL © B64-2879-00/00 (EW/E2W) KDC-W6527SE_EE2_U.S.Indd 1 04.4.7, 4:08:00 PM.
2 | English Con t ents Sa fe ty precautions 3 Notes 5 Notes on playing MP3/WMA 6 A bout CDs 8 G eneral fea tures 9 Pow er Selecting the Source Volume Attenuator System Q A udio Control Speaker Setting.
English | 3 Sa fe ty precautions 2 CA UTION To pr event damage to the machine , take the following precautions: • Make sure to gr ound the unit to a negative 12V DC power supply . • Do not open the top or bottom cov ers of the unit. • Do not install the unit in a spot exposed to dir ect sunlight or excessive heat or humidity .
4 | English Sa fe ty precautions NO TE • If you experience problems during installation, consult your Kenwood dealer . • If the unit fails to operate properly , press the Reset button. The unit returns to factory settings when the Reset button is pressed.
English | 5 Notes Cleaning the Unit If the faceplate of this unit is stained, wipe it with a dry sof t cloth such as a silicon cloth. If the faceplate is stained badly , wipe the stain off with a cloth moistened with neutral cleaner , then wipe neutral detergent off .
6 | English Notes on playing MP3/WMA KDC-W6527SE/ W6527/ W657 can play MP3 (MPEG1, 2 Audio Layer 3)/WM A. Note, however , that the MP3/WMA recor ding media and formats acceptable are limited. When writing MP3/WMA, pay attention to the f ollowing restrictions.
English | 7 MP3/WMA playing order When selected for play , F older Search, File Sear ch, or for F older Select, files and folders are accessed in the order in which they were written by the CD writer . Because of this, the order in which they ar e expected to be played may not match the or der in which they are actually played.
8 | English Handling CDs • Don ’t touch the recor ding sur face of the CD . • CD-R and CD-R W are easier to damage than a normal music CD. Use a CD-R or a CD-R W after r eading the caution items on the package etc. • Don ’t stick tape etc. on the CD .
English | 9 G eneral f eatures Powe r Tu rning ON the Pow er Pr ess the [SRC] button. Tu rning OFF the Pow er Pr ess the [SRC] button for at least 1 second.
10 | English G eneral f eatures Syst em Q Y ou can recall the best sound setting preset for different types of music. 1 S elect the source to set Pr ess the [SRC] button. 2 S elect the Sound type Pr ess the [Q] butt on. Each time the button is pressed the sound setting switches.
English | 11 Each time the button is pressed the setting switches as shown below . S peaker type Display OFF "Speaker OFF" F or 5 & 4 in. speak er "Speak er 5/4inch. " F or 6 & 6x9 in. speak er "Speaker 6*9/6inch" F or the OEM speak er "Speaker O .
12 | English G eneral f eatures Upper text display part select Y ou can select the information displayed in the upper part in Display mode "Display Type A " or "Display T ype B" . 1 Enter display con trol mode Pr ess the [DISP] button.
English | 13 • Y ou cannot display the same information as the one in the Upper text display. • When you select " Display T ype B" fo r the Display mode, y ou can select only on and off of the clock display .
14 | English G eneral f eatures A uxiliary Input Display Setting S electing the display when this device is switched to A uxiliary input source. 1 S elect Auxiliary input source Pr ess the [SRC] button. Select the " AUX"/ " AUX EXT" display.
English | 15 TEL Mute T he audio system automatically mutes when a call comes in. W hen a call comes in "CALL " is displayed. The audio system pauses. Listening to the audio during a call Pr ess the [SRC] button. The "CALL " display disappears and the audio system comes back ON.
16 | English F unction of remote Direct Acc ess T uning Entering the frequency and tuning. 1 S elect the band Pr ess the [FM] or [AM] butt on. 2 Enter Direct Acc ess T uning mode Pr ess the [DIRECT ] button on the remote. "– – – –" is displayed.
English | 17 Pr eset T uning C alling up the stations in the memory. 1 S elect the band Pr ess the [FM] or [AM] butt on. 2 C all up the station Pr ess the desired [1] — [6] button. Au to Memor y Entry P utting a station with good reception in the memory automatically.
18 | English RDS featur es Tr affic Information S witching to traffic inf ormation automatically when a traffic bulletin starts even when you aren ’t listening to the radio . Pr ess the [ TI] button. Each time the button is pressed the Traffic In for mation func tion turns ON or OFF .
English | 19 2 S elect the Program T ype Pr ess the [FM] or [AM] butt on. Each time the button is pressed the P rogram T ype switches as shown below. No. Program Type Display 1. Speech " All Speech" 2. Music " All Music" 3. News "News" 4.
20 | English RDS featur es Changing Language for PTY Function S electing the Program Type display language . 1 Enter PTY mode Refer to 'PTY (Program Type)' (page 18). 2 Enter Changing Language mode Pr ess the [DISP] button. 3 S elect the language Pr ess the [FM] or [AM] butt on.
English | 21 CD/MP3/WMA/External disc control f eatures Playing CD & MP3/WMA W hen there is no disc inserted 1 Open the panel to insert disc Pr ess the [ 0 ] button. 2 I nsert a disc. • When the faceplate has been slid open, it might interfere with the shift lever or something else.
22 | English CD/MP3/WMA/External disc control f eatures Playing External Disc Playing discs set in the optional accessory disc player connected to this unit.
English | 23 Sc an Play Playing the first part of each song on the disc or MP3/WMA folder y ou are listening to and searching for the song y ou want to listen to. 1 S tart Scan Play Pr ess the [SCAN] button. "Scan ON"/ "Track Scan ON" is display ed.
24 | English CD/MP3/WMA/External disc control f eatures Disc Naming (DNPS) A ttaching a title to a CD . 1 Play the disc you w ant to attach a name to • Refer to the 'Upper text display part select' (page 12) and select the "DNPS" display.
English | 25 Menu system Menu Sy stem S etting during operation beep sound etc. functions. T he Menu system basic operation method is explained here. The reference f or the Menu items and their setting content is after this operation explanation. 1 Enter Menu mode Pr ess the [MENU] button for at least 1 second .
26 | English Menu system In Standby mode S ecurity Code Because authorization by the Security Code is r equired when it’ s removed from the v ehicle, personalizing this unit is by using the Security C ode is a help in preventing theft. • When the Security Code function is activated it can’t be released.
English | 27 S ynchr onize Clock S ynchronizing the RDS station time data and this unit’ s clock. Display Setting "SYNC ON" Synchronizes the time . "SYNC OFF" Adjust the time manually . • It takes 3 to 4 minutes to synchronize the clock.
28 | English Menu system F unction of the KDC-W6527SE/ KDC-W6527 In External disc, or Auxiliary input source D ual Zone S ystem M akes the sound different f or the front channel and rear channel. Display Setting "Zone 2 OFF" The fr ont and rear ar e the same source sound .
English | 29 In T uner mode Loc al S eek Only stations whose reception is good are searched for in auto seek tuning . Display Setting "Local .S OFF" The local seek function is OFF . "Local .S ON" The local seek function is ON. In T uner mode T uning Mode S ets the tuning mode.
30 | English Menu system External Display Con trol S witch the display of the External Display c onnected to this unit. Display "DISP Out Select" Each time the [ 4 ] or [ ¢ ] button is pressed the display switches. Te x t Scr oll S etting the displayed text scroll.
English | 31 When LX AMP unit connecting AMP Con trol Y ou can control the LX AMP connected to the unit. 1 S elect AMP Control mode Pr ess the [FM] or [AM] butt on. Select the " AMP Control" display . 2 Enter AMP Contr ol mode Pr ess the [ 4 ] or [ ¢ ] button for at least 1 second.
32 | English A cc essory of the KDC-W6527SE/ KDC-W6527 Basic Operations of r emote L oading and Replacing the battery U se one lithium battery (CR2025). I nsert the batteries with the + and – poles aligned properly , following the illustration inside the case .
English | 33 In T uner source [FM]/ [ AM] buttons Select the band. Each time the [FM] button is pr essed it switches between the FM1, F M2, and FM3 bands. [ 4 ]/ [ ¢ ] buttons T une up or down band. [0] — [9] buttons Pr ess buttons [1] — [6] to recall preset stations .
34 | English A cc essories/ Installa tion Procedur e A cc essories 1 ..........1 2 ..........2 3 ..........1 4 ..........1 Installation Proc edure 1. T o prevent short circuits, remove the key from the ignition and disconnect the - ter minal of the battery.
English | 35 TEL MUTE EXT. CONT P.CONT ANT.CONT 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 AUX IN C onnecting W ires to T erminals If no connections are made, do not let the wire come out from the tab . C onnect either to the power control ter minal when using the optional power amplifier , or to the antenna control terminal in the vehicle.
36 | English C onnector F unc tion Guide P in Numbers for ISO Connectors C able Colour F unctions External Power Connector A-4 Y ellow Batter y A-5 Blue/White Power Contr ol A-6 Orange/White Dimmer A-.
English | 37 Installation • Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction (for example, the sound may skip).
38 | English Removing the Unit Removing the hard rubber fr ame 1 Engage the catch pins on the removal tool and r emove the two locks on the upper level . Upper the frame and pull it forward as shown in the figure. 2 When the upper level is removed , remove the lower two locations.
English | 39 Tr oubleshooting Guide What might seem to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Befor e calling ser vice , first check the f ollowing table f or possible problems. G eneral ? T he pow er does not turn ON.
40 | English ? It isn’ t the set T raffic information sound volume . ✔ The set sound volume is less than the tuner sound v olume. ☞ If the tuner sound volume is louder than the set sound volume,the tuner sound volume is used. Disc source ? "A UX EXT" is displayed without achieving External disc control mode.
English | 41 Hold Error: The protective circuit in the unit activates when the temperature inside the automatic disc changer exceeds 60°C (140°F), stopping all operation. ➪ C ool down the unit by opening the windows or turning on the air conditioner .
42 | English FM tuner section Fr equenc y range (50 kHz space) : 87.5 MHz – 108.0 MH z Usable sensitivity (S/N = 26dB) : 0.7 µV /75 Ω Quieting Sensitivity (S/N = 46dB) : 1.
KDC-W6527SE_EE2_U.S.Indd 43 04.4.7, 4:09:15 PM.
KDC-W6527SE_EE2_U.S.Indd 44 04.4.7, 4:09:15 PM.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Kenwood KDC-W6527SE c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Kenwood KDC-W6527SE - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Kenwood KDC-W6527SE, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Kenwood KDC-W6527SE va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Kenwood KDC-W6527SE, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Kenwood KDC-W6527SE.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Kenwood KDC-W6527SE. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Kenwood KDC-W6527SE ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
