Manuel d'utilisation / d'entretien du produit KDC-MPV7026 du fabricant Kenwood
Aller à la page of 34
KDC-MPV7026 KDC-MP6026 CD-RECEIVER INSTR UCTION MANU AL © B64-2699-00/0 1 (MW) B64-2699-00_U.S(M).Indd 1 03.11.10, 3:18:21 PM.
2 | English Con t ents Sa fe ty precautions 3 Notes 5 Notes on playing MP3/WMA 6 A bout CDs 8 G eneral fea tures 9 Pow er Selecting the Source Volume System Q A udio Control Speaker Setting Switching .
English | 3 Sa fe ty precautions 2 CA UTION To pr event damage to the machine , take the following precautions: • Make sure to gr ound the unit to a negative 12V DC power supply . • Do not open the top or bottom cov ers of the unit. • Do not install the unit in a spot exposed to direct sunlight or excessive heat or humidity .
4 | English Sa fe ty precautions NO TE • If you experience problems during installation, consult your Kenwood dealer . • If the unit fails to operate properly , press the Reset button. The unit returns to factory settings when the Reset button is pressed.
English | 5 Notes Cleaning the Unit If the faceplate of this unit is stained, wipe it with a dry sof t cloth such as a silicon cloth. If the faceplate is stained badly , wipe the stain off with a cloth moistened with neutral cleaner , then wipe neutral detergent off .
6 | English Notes on playing MP3/WMA Note, however , that the MP3/WMA recording media and formats acceptable are limited . When writing MP3/WMA, pay attention to the f ollowing restrictions. A cce ptable media The MP3/WMA recor ding media acceptable to this unit are CD-ROM, CD-R, and CD -RW.
English | 7 MP3/WMA playing order When selected for play , F older Search, File Sear ch, or for F older Select, files and folders are accessed in the order in which they were written by the CD writer . Because of this, the order in which they ar e expected to be played may not match the or der in which they are actually played.
8 | English Handling CDs • Don ’t touch the recor ding sur face of the CD . • CD-R and CD-R W are easier to damage than a normal music CD. Use a CD-R or a CD-R W after r eading the caution items on the package etc. • Don ’t stick tape etc. on the CD .
English | 9 G eneral f eatures Powe r Tu rning ON the Pow er Pr ess the [SRC] button. • When the power is ON, the 'Security Code' (page 20) is displayed as "CODE ON" or "C ODE OFF" . Tu rning OFF the Pow er Pr ess the [SRC] button for at least 1 second.
10 | English G eneral f eatures Syst em Q Y ou can recall the best sound setting preset for different types of music. 1 S elect the source to set Pr ess the [SRC] button. 2 S elect the Sound type Pr ess the [Q] butt on. Each time the button is pressed the sound setting switches.
English | 11 S witching Displa y S witching the information displa yed. Pr ess the [DISP] button. Each time the button is pressed the display switches as shown below .
12 | English G eneral f eatures Sta tion/Disc Naming (SNPS/DNPS) A ttaching a title to a Station or CD . 1 Receive/pla y the station/disc you want to a ttach a title to • A title can’t be attached to an MD . • Refer to the 'Switching Display' (page 11) and select either "DNPS" or "SNPS" .
English | 13 T heft Deterrent F a c eplate T he faceplate of the unit can be detached and taken with you, helping to deter theft. Removing the F aceplate 1 Pr ess the Release button. Drop open the faceplate. 2 Drawing the facepla te to left side pull it to the front and remov e it.
14 | English T uner/T V contr ol features T uning Mode Choose the tuning mode. Pr ess the [A UTO ] button. Each time the button is pressed the Tuning mode switches as shown below . T uning mode Display Operation Au to seek " Auto 1" Automatic sear ch for a station.
English | 15 C anceling Dir ec t A ccess T uning Pr ess the [DIRECT ] button on the remote. Sta tion Preset Memory P utting the station in the memory. 1 S elect the band Pr ess the [FM] or [AM] butt on. 2 S elect the frequency to put in the memor y Pr ess the [ 4 ] or [ ¢ ] button.
16 | English CD/MP3/WMA/External disc control f eatures Playing CD & MP3/WMA W hen there is no disc inserted 1 Drop open the faceplate Pr ess the Release button. 2 I nsert a disc. 3 Pr ess the faceplate on the left side, and r eturn it to its former position.
English | 17 • The MP3/WMA media that this unit can play are CD- R OM, CD-R, and CD-R W . The medium formats must be ISO 9660 Level 1, L evel 2, Joliet, or Romeo. The methods and precautions to be followed f or writing MP3/WMA data are covered in 'Notes on playing MP3/WMA ' (page 6).
18 | English CD/MP3/WMA/External disc control f eatures Tr ack/File/Disc/F older Repeat Replaying the song, disc in the Disc changer or MP3/WMA folder y ou’ re listening to . Pr ess the [REP] button. Each time the button is pressed the Repeat Play switches as shown below .
English | 19 • The methods for moving to other f olders in the folder select mode are different fr om those in the folder search mode. See 'Notes on playing MP3/WMA ' (page 6) for details. C anceling the F older Select mode Pr ess the [F .
20 | English Menu system Menu Sy stem S etting during operation beep sound etc. functions. T he Menu system basic operation method is explained here. The reference f or the Menu items and their setting content is after this operation explanation. 1 Enter Menu mode Pr ess the [MENU] button for at least 1 second .
English | 21 y our "Car Audio P assport" in this pack age. 1 Enter Standby Pr ess the [SRC] button. Select the "ST ANDBY" display. 2 Enter Menu mode Pr ess the [MENU] button for at least 1 second . When "MENU" is displayed , "Securit y" is displayed .
22 | English Menu system S electable Illumination S electing the button illumination color as green or re d. Display Setting "Color Red" T he illumination color is red . "Color Gr een" The illumination c olor is green. S witching Displa y T ype S etting the Display type.
English | 23 In External disc, or Auxiliary input source D ual Zone S ystem M akes the sound different f or the front channel and rear channel. Display Setting "Zone 2 OFF" The fr ont and rear ar e the same source sound . "Zone 2 ON" T he front and r ear are the differen t source sound.
24 | English Basic Operations of r emote L oading and Replacing the battery U se two " AA "-size batteries. Slide the cover while pr essing downwards to r emove it as illustrated . I nsert the batteries with the + and – poles aligned properly , following the illustration inside the case .
English | 25 In T uner source [FM]/ [ AM] buttons Select the band. Each time the [FM] button is pr essed it switches between the FM1, F M2, and FM3 bands. [ 4 ]/ [ ¢ ] buttons T une up or down band. [0] — [9] buttons Pr ess buttons [1] — [6] to recall preset stations .
A cc essories/ Installa tion Procedur e A cc essories ➀ ..........1 ➁ ..........2 ➂ ..........4 ➃ ..........4 ➄ ..........1 ➅ ..........1 ➆ ..........2 Installation Proc edure 1. T o prevent a short circuit, remove the key from the ignition and disconnect the - batter y .
C onnecting W ires to T erminals ANT. CONT P.CONT TEL MUTE FRONT • L FRONT • R REAR • L REAR • R – + FRONT AUX IN F M/AM antenna input Fr ont right output (Red) Fu se (10A) Wir ing harness (.
Installation • Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction (for example, the sound may skip). non-Japanese cars J apanese cars 1 Refer to the section 'Removing the hard rubber frame' (page 30) and then remove the hard rubber frame.
Sc re wing the F aceplate on the Unit If y ou want to fasten the fac eplate to the main unit so that it does not fall off . 1 Refer to the section 'Removing the hard rubber frame' (page 30) and then remove the hard rubber frame. 2 Drop open the faceplate by pressing the Release button.
Removing the Unit Removing the hard rubber frame 1 Engage the catch pins on the removal tool and r emove the two locks on the upper level . Upper the frame and pull it forward as shown in the figure. 2 When the upper level is removed , remove the lower two locations.
Tr oubleshooting Guide What might seem to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Befor e calling ser vice, first check the f ollowing table f or possible problems. G eneral ? T he pow er does not turn ON.
Tr oubleshooting Guide Disc source ? “A UX EXT” is displayed without achieving External disc control mode. ✔ Unsupported disc changer is connected. ☞ Use the disc changer mentioned in the ' About CD players/disc changers connected to this unit' (page 4) of the sec tion on 'Safety precautions' .
T he messages shown below displa y your systems condition. EJ ECT: No disc magazine has been loaded in the changer . The disc magazine is not completely loaded. ➪ L oad the disc magazine properly. No CD in the unit. ➪ I nsert the CD. No Disc: No disc has been loaded in the disc magazine.
A udio section M aximum output power : 50 W x 4 F ull Bandwidth P ower (at less than 1% THD) : 22 W x 4 T one action Bass : 100 Hz ±10 dB M iddle : 1 kHz ±10 dB Tr eble : 10 kH z ±10 dB Pr eout lev.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Kenwood KDC-MPV7026 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Kenwood KDC-MPV7026 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Kenwood KDC-MPV7026, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Kenwood KDC-MPV7026 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Kenwood KDC-MPV7026, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Kenwood KDC-MPV7026.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Kenwood KDC-MPV7026. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Kenwood KDC-MPV7026 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
