Manuel d'utilisation / d'entretien du produit KDC-MP535U du fabricant Kenwood
Aller à la page of 40
CD-RECEIVER KDC-X591 KDC-MP535U INSTR UCTION MANU AL © B64-3616-00/00 (KW) T ake the time to r ead through this instruction manual. F amiliarity with installation and operation procedur es will help you obtain the best performance from your new CD-receiv er .
2 | English Con tents Safety precautions 3 Notes 4 General featur es 7 Pow er Selecting the Source Volume Attenuator Audio Control Adjusting the detail of Audio Contr ol Audio Setup Speaker Setting Sw.
English | 3 2 W ARNING T o prev ent injury or fire, take the follo wing precautions: • T o prevent a short circuit, never put or leave an y metallic objects (such as coins or metal tools) inside the unit. • Do not watch or fix your ey es on the unit ’ s display when you are driving for an y extended period.
4 | English Notes • If you experience problems during installation, consult your Kenwood dealer . • When you pur chase optional accessories, check with your Kenwood dealer to make sure that they work with your model and in your area. • W e recommend the use of <Activating Security Code> (page 22) to prev ent theft.
English | 5 About Audio file • Playable Audio file AAC-L C (.m4a), MP3 (.mp3), WMA (.wma), W AV (.wav) • Playable disc media CD-R/R W/ROM • Playable disc file forma t ISO 9660 Level 1/2, Joliet, Romeo, L ong file name.
6 | English Notes Handling CDs • Do not touch the recor ding sur face of the CD. • Do not stick tape etc. on the CD , or use a CD with tape stuck on it. • Do not use disc type accessories. • Clean from the cent er of the disc and move outward.
English | 7 General fea tures Powe r T urning ON the Power Press the [SRC] button. T urning OFF the Power Press the [SRC] button for at least 1 sec ond.
8 | English General fea tures Audio C ontrol 1 Select the source to adjust Press the [SRC] button. 2 Enter Audio C ontrol mode Press the [VOL] knob. 3 Select the Basic Audio item to adjust Press the [VOL] knob. Each time you press the knob, the item to be adjusted alternates between the items shown in the table below .
English | 9 Audio Setup Setting the Sound system, such as Cross over Network. 1 Select the source to adjust Press the [SRC] button. 2 Enter Audio Setup mode Press the [VOL] knob for at least 1 second. 3 Select the Audio Setup item to adjust Press the [VOL] knob.
10 | English General fea tures Switching Displa y Changing the information display ed. 1 Enter Switching Displa y mode Press the C ontrol knob for at least 1 second. "DISP SEL " is displayed. 2 Select the Display item Push the Contr ol knob towards right or left.
English | 11 TEL Mute The audio system automatically mutes when a call comes in. When a call comes in "CALL " is displayed. The audio system pauses. Listening to the audio during a call Press the [SRC] button. The "CALL " display disappears and the audio system comes back ON.
12 | English T uner featur es T uning Selecting the station. 1 Select tuner source Press the [SRC] button. Select the " TUNER" display . 2 Select the band Push the Contr ol knob towards [FM] or [ AM]. Each time you push the knob toward [FM], it switches between the FM1, F M2, and FM3 bands.
English | 13 F unction of remote control Direct Acc ess T uning Entering the frequency and tuning. 1 Select the band Press the [F M] or [AM] button. 2 Enter Direct Acc ess T uning mode Press the [DIRECT ] button on the remote control. "– – – –" is displayed.
14 | English CD/USB device/A udio file/External disc control f eatures Playing CD & A udio file When there is no disc inserted 1 Drop open the faceplat e Press the Release button. 2 Insert a disc. 3 Push the facepla te on the left side, and return it to its former position.
English | 15 ⁄ • Y ou can eject the disc for 10 minutes after switching off the engine. Playing USB (iP od) device When the USB devic e is not connected C onnect the USB device Playback of the file contained in the USB device starts. When the USB devic e is connected Select USB source Press the [SRC] button.
16 | English CD/USB device/A udio file/External disc control f eatures Playing External Disc Playing discs set in the optional accessory disc player connected to this unit.
English | 17 T rack/File/Disc/F older Repeat Replaying the music, disc in the Disc changer or Audio file folder y ou are listening to . Press the [REP] button. Each time you press the button, the Repeat P lay alternates between the modes shown in the tables below .
18 | English CD/USB device/A udio file/External disc control f eatures F unction of iPod, "Music Editor" file File select Selecting the music you want to listen to from the device or media being played now . 1 En ter File Select mode Press the [F .
English | 19 F unction of non-iPod and non-"Music Editor" file File Select 2 mode Select the target folder within the folders containing audio files. The folder which contains playable audio files is only displayed . 1 Enter F older Selec t 2 mode Press the [F .
20 | English HD Radio control f eatures About HD Radio • When you connect an HD Radio, T uner features of the unit are disabled and changed to HD Radio tuner features .
English | 21 Menu system Menu Sy stem Setting beep sound during operation, etc. functions. The Menu system basic operation method is explained here. The reference f or the Menu items and their setting content is after this operation explanation. 1 Enter Menu mode Press the [MENU] button.
22 | English Menu system In Standby mode Activating Security C ode Activating the Security Code disables the usage of audio unit by someone else. Once the Security Code is activated, the entry of authorized Security Code is requir ed to turn on the audio unit when it is removed fr om the vehicle.
English | 23 In Standby mode T ouch Sensor T one Setting the operation check sound (beep sound) ON/OFF . Display Setting "BEEP ON" Beep is heard. "BEEP OFF" Beep canceled. In Standby mode Manual Clock Adjustment 1 Select Clock Adjustment mode Push the Contr ol knob towards up or down.
24 | English Menu system Other than Standby mode/ When the Dual Zone Syst em is ON Dual Zone Sy stem Setting Setting the Front channel and Rear channel sound in the Dual Zone Syst em. Display Setting "ZONE2 R" Sub source ( Auxiliary input source) is to be rear channel.
English | 25 In HD Radio mode Receiv e mode Setting Sets the receive mode . 1 Select the Receive mode Push the Contr ol knob towards up or down. Select the "HDR MODE" display. 2 Enter Receiv e mode Press the C ontrol knob for at least 1 second.
26 | English Menu system In Standby mode Built-in Auxiliary input Setting Set the Built-in Auxiliary Input func tion. Display Setting " AUX OFF" When selecting the source ther e’ s no Auxiliar y Input. " AUX ON" When selecting the source ther e’ s Auxiliary Input.
English | 27 Other than Standby mode Audio Pr eset Recall Recalling the sound setup register ed by <Audio Preset Memory> (page 26). 1 Select the source Press the [SRC] button. 2 Enter Menu mode Press the [MENU] button. "MENU" is displayed .
28 | English Basic Operations of r emote contr ol Loading and Replacing the battery Use two " AA "/ "R6"-size batteries. Slide the cover while pr essing downwards to remove it as illustrated . Inser t the batteries with the + and – poles aligned properly , following the illustration inside the case .
English | 29 Audio C ontrol [A UD] button Selects the Audio item to be adjusted. [VOL] buttons Adjusts the Audio item. ⁄ • Refer to <Audio C ontrol> (page 8) for the operation method, such as the procedures f or Audio control and others operations.
30 | English Ac cessories/ Installation P rocedure ¤ • If the power is not turned ON ("PROTECT " is displayed), the speaker wire may have a short-circuit or touched the chassis of the vehicle and the protection function may have been activated.
English | 31 Connecting W ires to T erminals P .CONT ILLUMI ANT . CONT MUTE FRONT L FRONT R REAR L REAR R – + SUB WOOFER AUX IN REMO.CONT FM/AM antenna input Fr ont left output ( White) Fr ont right.
32 | English Installation non-Japanese cars Fir ewall or metal suppor t Screw (M4X8) (commercially available) Self-tapping screw (commercially available) Metal mounting strap (commercially available) Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place.
English | 33 Removing the hard rubber fr ame 1 Engage the catch pins on the r emoval tool and remove the two locks on the upper level . Upper the frame and pull it forward as shown in the figure. Catch Lock Accessory 2 Removal tool 2 When the upper level is r emoved, remove the lower two locations.
Some functions of this unit may be disabled by some settings made on this unit. ! Cannot switch to A ux source. ▲ • AUX is not turned on. ☞ <Built-in Auxiliary input Setting> (page 26) • A UX cannot be used when the KCA-iP200 is connected.
HD Radio source ? No sound can be heard, or the volume is lo w. ✔ The preset br oadcast station is not transmitting in the mode that was set with <Receive mode Setting> (page 25). ☞ Please set <Receive mode Setting> to " AUTO" .
The messages shown belo w display your systems condition. EJEC T: • No disc magazine has been loaded in the changer . The disc magazine is not completely loaded. • No CD in the unit. NO DISC: No disc has been loaded in the disc magazine. TOC ERR: • No disc has been loaded in the disc magazine.
English | 37 Specifications FM tuner section Fr equency range (200 kH z space) : 87.9 MH z – 107.9 MHz Usable sensitivity (S/N = 30dB) : 9.3dBf (0.8 μV /75 Ω) Quieting Sensitivity (S/N = 50dB) : 15.
B64-3616-00_00_English.indd 38 B64-3616-00_00_English.indd 38 06.12.11 8:46:59 AM 06.12.11 8:46:59 AM.
B64-3616-00_00_English.indd 39 B64-3616-00_00_English.indd 39 06.12.11 8:46:59 AM 06.12.11 8:46:59 AM.
B64-3616-00_00_English.indd 40 B64-3616-00_00_English.indd 40 06.12.11 8:46:59 AM 06.12.11 8:46:59 AM.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Kenwood KDC-MP535U c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Kenwood KDC-MP535U - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Kenwood KDC-MP535U, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Kenwood KDC-MP535U va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Kenwood KDC-MP535U, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Kenwood KDC-MP535U.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Kenwood KDC-MP535U. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Kenwood KDC-MP535U ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
