Manuel d'utilisation / d'entretien du produit KDC-8026 du fabricant Kenwood
Aller à la page of 40
KDC-8026 CD-RECEIVER INSTR UCTION MANU AL © B64-2745-00/01 (MV) B64-2745-00_U.S(M).Indd 1 03.11.27, 3:26:11 PM.
2 | English Con t ents Sa fe ty precautions 3 Notes 5 Notes on playing MP3/WMA 6 Abo ut CDs 8 Notes on Multi-function Key Sy stem 9 G eneral fea tures 10 Pow er H iding the Control P anel Selecting th.
English | 3 Sa fe ty precautions 2 WA RNING To pr event injury or fire, tak e the f ollowing precautions: • Insert the unit all the way in until it is fully locked in place.
4 | English Sa fe ty precautions NO TE • If you experience problems during installation, consult your Kenwood dealer . • If the unit fails to operate properly , press the Reset button. The unit returns to factory settings when the Reset button is pressed.
English | 5 Notes Cleaning the Unit If the faceplate of this unit is stained, wipe it with a dry sof t cloth such as a silicon cloth. If the faceplate is stained badly , wipe the stain off with a cloth moistened with neutral cleaner , then wipe neutral detergent off .
6 | English Notes on playing MP3/WMA Note, however , that the MP3/WMA recording media and formats acceptable are limited . When writing MP3/WMA, pay attention to the f ollowing restrictions. A cc eptable media The MP3/WMA recor ding media acceptable to this unit are CD-ROM, CD-R, and CD -RW.
English | 7 MP3/WMA playing order When selected for play , F older Search, File Sear ch, or for F older Select, files and folders are accessed in the order in which they were written by the CD writer . Because of this, the order in which they ar e expected to be played may not match the or der in which they are actually played.
8 | English Handling CDs • Don ’t touch the recor ding sur face of the CD . • CD-R and CD-R W are easier to damage than a normal music CD. Use a CD-R or a CD-R W after r eading the caution items on the package etc. • Don ’t stick tape etc. on the CD .
English | 9 Notes on Multi-function Key S ystem Multi-function Key System ser ves to control various functions with the [2] — [5] buttons. The basic operation of the Multi-function Key System is described below .
10 | English G eneral f eatures Powe r Tu rning ON the Pow er T urn the vehicle ignition ON. The panel appears. • When the power is ON, the 'Security Code' (page 32) is displayed as "CODE ON" or "C ODE OFF" . Tu ring OFF the Pow er T urn the vehicle ignition OFF or press the [SRC] button for at least 1 second.
English | 11 Se lecting the Source Pr ess the [SRC] button. S ource required Display T uner "TUNER" CD "CD" External disc (Optional accessory) "CD CH"/"CD2" TV .
12 | English G eneral f eatures Aud io C ontrol 1 S elect the source for adjustment Pr ess the [SRC] button. 2 S elect the key function sec tion Pr ess the [NEXT ] button. Repeatedly press the button until " AUD" is displayed above the [2] button.
English | 13 2nd section [2] button A djustment Item Display Range Fr ont/Rear High P ass Filter "HPF" THRU/100/125/170 Hz [3] button A djustment Item Display Range Subwoofer L ow Pass F ilt.
14 | English G eneral f eatures In External disc, or Auxiliary input source Du al Zone S ystem M akes the sound different f or the front channel and rear channel. Output the Internal source sound from either one of the front or rear channels, and the sound of other source from the Dual z one channel.
English | 15 Te xt Displa y Switching S witching the text display . 1 S elect the key function sec tion Pr ess the [NEXT ] button. Repeatedly press the button until "DISP" is displayed above the [3] button. Refer to 'Notes on Multi-function Key System' (page 9).
16 | English G eneral f eatures Sta tion/Disc Naming (SNPS/DNPS) A ttaching a title to a Station or CD . 1 Receive/pla y the station/disc you want to a ttach a title to • A title can ’t be attached to an MD. • Refer to the 'T ex t Display Switching' (page 15) and select either "DNPS" or "SNPS" .
English | 17 Repeatedly press the button until "PNL " is displayed above the [4] button. Refer to 'Notes on Multi-function Key System' (page 9). 2 Enter Panel P osition Setting mode Pr ess the [4] ("PNL ") button. 3 S elect the item for adjustment Pr ess the desired [2] — [5] button.
18 | English T uner/T V contr ol features Tu ning Mode Choose the tuning mode. Pr ess the [A UTO ] button. Each time the button is pressed the Tuning mode switches as shown below . T uning mode Display Operation Au to seek " Auto 1" A utomatic search for a station.
English | 19 C anceling Dir ec t A ccess T uning Pr ess the [DIRECT ] button on the remote. Sta tion Preset Memory P utting the station in the memory. 1 S elect the band Pr ess the [FM] or [AM] butt on. 2 S elect the frequenc y to put in the memory Pr ess the [ 4 ] or [ ¢ ] button.
20 | English CD/MP3/WMA/External disc control f eatures Playing CD & MP3/WMA W hen there is no disc inserted 1 Open the panel to insert disc Pr ess the [ 0 ] button. 2 I nsert a disc. • When the faceplate has been slid open, it might interfere with the shift lever or something else.
English | 21 Playing External Disc Playing discs set in the optional accessory disc player connected to this unit. Pr ess the [SRC] button. Select the display for the disc player you want.
22 | English CD/MP3/WMA/External disc control f eatures Tr ack/File/Disc/F older Repeat Replaying the song, disc in the Disc changer or MP3/WMA folder y ou’ re listening to . 1 S elect the key function sec tion Pr ess the [NEXT ] button. Repeatedly press the button until "REP" is displayed above the [4] button.
English | 23 F unction of MP3/WMA Fo lder S elect Quickly selecting the folder you want to listen to . 1 S elect the key function sec tion Pr ess the [NEXT ] button. Repeatedly press the button until "FSEL " is displayed above the [5] button.
24 | English Menu system Menu Sy stem S etting during operation beep sound etc. functions. T he Menu system basic operation method is explained here. The reference f or the Menu items and their setting content is after this operation explanation. 1 Enter Menu mode Pr ess the [MENU] button for at least 1 second .
English | 25 1 Enter Standby Pr ess the [SRC] button. Select the "ST ANDBY" display. 2 Enter Menu mode Pr ess the [MENU] button for at least 1 second . When "MENU" is displayed , "Securit y" is displayed . 3 Enter Security Code mode Pr ess the [ 4 ] or [ ¢ ] button for at least 1 second.
26 | English Menu system Se lectable Illumination S electing the button illumination color as green or re d. Display Setting "Button Green" The illumination c olor is green.
English | 27 In Standby mode Built-in Amp Mute Setting T oggles ON or OFF the mute control on the built- in amplifier . Tu rning ON this control enhances the pr eout quality. Display Setting "A MP Mute OFF" The built-in amplifier activates. "A MP Mute ON" T he built-in amplifier deactivates.
28 | English Menu system When LX AMP unit connecting AMP Con trol Y ou can control the LX AMP connected to the unit. 1 S elect AMP Control mode Pr ess the [FM] or [AM] butt on. Select the " AMP Control" display . 2 Enter AMP Contr ol mode Pr ess the [ 4 ] or [ ¢ ] button for at least 1 second.
English | 29 Basic Operations of r emote Lo ading and Replacing the battery U se two " AA "-size batteries. Slide the cover while pr essing downwards to r emove it as illustrated . I nsert the batteries with the + and – poles aligned properly , following the illustration inside the case .
30 | English Basic Operations of r emote In T uner source [FM]/ [ AM] buttons Select the band. Each time the [FM] button is pr essed it switches between the FM1, F M2, and FM3 bands. [ 4 ]/ [ ¢ ] buttons T une up or down band. [0] — [9] buttons Pr ess buttons [1] — [6] to recall preset stations .
English | 31 A cc essories/ Installa tion Procedur e A cce ssories 1 ..........1 2 ..........2 3 ..........4 4 ..........4 5 ..........2 Installation Proc edure 1. T o prevent a short circuit, remove the key from the ignition and disconnect the - batter y .
32 | English C onnecting W ires to T erminals ANT. CONT P.CONT TEL MUTE FRONT • L FRONT • R REAR • L REAR • R – + AUX IN REAR FRONT SUB WOOFER F M/AM antenna input Rear left output ( White)/.
English | 33 Installation • Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction (for example, the sound may skip).
34 | English Installation Lo cking the Backpanel to the unit If y ou want to fasten the fac eplate to the main unit so that it does not fall off . 1 Refer to the Removing the Backpanel function of the section on ' Theft Deterrent P anel' (page 17) and remove the Backpanel.
English | 35 Removing the Unit Removing the hard rubber fr ame 1 Engage the catch pins on the removal tool and r emove the two locks on the upper level . Upper the frame and pull it forward as shown in the figure. 2 When the upper level is removed , remove the lower two locations.
36 | English Tr oubleshooting Guide What might seem to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Befor e calling ser vice , first check the f ollowing table f or possible problems. G eneral ? T he pow er does not turn ON.
English | 37 T uner source ? Ra dio reception is poor . ✔ The car antenna is not extended. ☞ P ull the antenna out all the way . ✔ The antenna control wire is not connected. ☞ C onnect the wire correctly, ref erring to the section on 'Connecting Wir es to T erminals' .
38 | English Tr oubleshooting Guide T he messages shown below displa y your systems condition. EJ ECT: No disc magazine has been loaded in the changer . The disc magazine is not completely loaded. ➪ L oad the disc magazine properly. No CD in the unit.
English | 39 Specifications subject to change without notice. FM tuner section Fr equenc y range 200 kHz space : 87.9 MH z – 107.9 MHz 50 kHz space : 87.5 MH z – 108.0 MHz Usable sensitivity (S/N = 30dB) : 9.3dBf (0.8 µV /75 Ω) Quieting Sensitivity (S/N = 50dB) : 15.
B64-2745-00_U.S(M).Indd 40 03.11.27, 3:27:18 PM.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Kenwood KDC-8026 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Kenwood KDC-8026 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Kenwood KDC-8026, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Kenwood KDC-8026 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Kenwood KDC-8026, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Kenwood KDC-8026.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Kenwood KDC-8026. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Kenwood KDC-8026 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
