Manuel d'utilisation / d'entretien du produit DPX301 du fabricant Kenwood
Aller à la page of 36
DU AL DIN SIZED CD RECEIVER DPX301 INSTR UCTION MANU AL © B64-3285-00/00 (KW) T ake the time to r ead through this instruction manual. F amiliarity with installation and operation procedur es will help you obtain the best performance from your new CD-receiv er .
2 | English Con tents 2 W arning 3 Safety precautions 4 Notes 5 About CDs 6 About AA C, MP3 and WMA 7 General featur es 8 Pow er Selecting the Source Volume Attenuator System Q Audio Control Audio Set.
English | 3 2 W arning 2 CAUTION Use of controls or adjustments or performance of procedures other than those specified her ein may result in hazardous radiation exposur e. In compliance with Federal Regulations, f ollowing are repr oductions of labels on, or inside the product relating to laser product saf ety.
4 | English Safety precautions About CD play ers/disc changers connected to this unit Kenwood disc changers/ CD players released in 1998 or later can be connected to this unit. Refer to the catalog or consult your Kenw ood dealer for connectable models of disc changers/ CD players.
English | 5 • If you experience problems during installation, consult your Kenwood dealer . • When you pur chase optional accessories, check with your Kenwood dealer to make sure that they work with your model and in your area. • If the unit fails to operate properly , press the Reset button.
6 | English Handling CDs • Do not touch the recor ding sur face of the CD . • CD-R and CD-R W are easier t o damage than a normal music CD. Use a CD-R or a CD-R W after reading the caution items on the package etc. • Do not stick tape etc. on the CD , or use a CD with tape stuck on it.
English | 7 About AA C, MP3 and WMA The playable AAC/MP3/WMA file (her eafter called Audio file) and the media format has the f ollowing limitation. The Audio file, which is not comforming to the specification, may not play normally , or the file and folder names may not display correctly .
8 | English General fea tures Powe r T urning ON the Power Press the [SRC] button. T urning OFF the Power Press the [SRC] button for at least 1 sec ond.
English | 9 Sy stem Q Selecting the best sound setting preset for different types of music. 1 Select the source to set Press the [SRC] button. 2 Select the Sound type Press the [ Q] button. When you press the button once , the current sound setting is displayed.
10 | English General fea tures Audio Setup Setting the Sound system, such as Cross over Network. 1 Select the source to adjust Press the [SRC] button. 2 Enter Audio Setup mode Press the [VOL] knob for at least 1 second. 3 Select the Audio Setup item to adjust Press the [VOL] knob.
English | 11 Switching Displa y Changing the information display ed. Press the [DISP] button. Each time the button is pressed, the displa y switches as shown below .
12 | English General fea tures TEL Mute The audio system automatically mutes when a call comes in. When a call comes in "CALL " is displayed. The audio system pauses. Listening to the audio during a call Press the [SRC] button. The "CALL " display disappears and the audio system comes back ON.
English | 13 T uner featur es T uning Selecting the station. 1 Select tuner source Press the [SRC] button. Select the " TUNER" display . 2 Select the band Push the Contr ol knob towards [FM] or [ AM]. Each time you push the knob towards [FM], it switches between the FM1, F M2, and FM3 bands.
14 | English T uner featur es F unction of remote control Direct Acc ess T uning Entering the frequency and tuning. 1 Select the band Press the [F M] or [AM] button. 2 Enter Direct Acc ess T uning mode Press the [DIRECT ] button on the remot e control.
English | 15 CD/Audio file/External disc contr ol featur es Playing CD & A udio file When a disc is inserted Press the [SRC] button. Select the "CD" display. • When a CD is inserted, the "IN" indicator is ON. Pause and play Press the C ontrol knob.
16 | English CD/Audio file/External disc contr ol featur es F ast Forwarding and Re versing F ast Forwarding Hold down towar ds [ ¢ ] with the Control knob. Release your finger to play the disc at that point. Reversing Hold down towar ds [ 4 ] with the Control knob.
English | 17 Scan Play Playing the first part of each song on the disc or Audio file folder y ou are listening to and searching for the song y ou want to hear . 1 Start Sc an Pla y Press the [SCAN] button. "TRAC SCN"/"FILE SCN"/"SCAN ON" is displayed.
18 | English CD/Audio file/External disc contr ol featur es T ext/Title Scroll Scrolling the displayed CD text, Audio file t ext, or MD title. Push the Contr ol knob towards [FM] f or at least 2 seconds. • When the <Display Illumination Control> (page 22) is set to OFF , the display may black out while scr olling.
English | 19 HD Radio control f eatures About HD Radio • When you connect an HD Radio, Tuner featur es of the unit are disabled and changed to HD Radio tuner features.
20 | English Menu system Menu Sy stem Setting beep sound during operation, etc. functions. The Menu system basic operation method is explained here. The reference f or the Menu items and their setting content is after this operation explanation. 1 Enter Menu mode Press the [MENU] button f or at least 1 second.
English | 21 In Standby mode Activating Security C ode Activating the Security Code disables the usage of audio unit by someone else. Once the Security Code is activated, the entry of authorized Security Code is requir ed to turn on the audio unit when it is removed fr om the vehicle.
22 | English Menu system In Standby mode Manual Clock Adjustment 1 Select Clock Adjustment mode Push the Contr ol knob towards [FM] or [ AM]. Select the "CLK ADJ" display. 2 Enter Clock Adjust mode Press the C ontrol knob for at least 1 second.
English | 23 In Audio file source Supreme Setting When AAC, MP3 or WMA files encoded at a low bit rate (less than 96kbps (fs=32k, 44.1k, 48kH z)) are played , this function restores their high frequency region to approach the sound quality of equivalents of these files encoded at a high bit rate.
24 | English Menu system Auxiliary Input Display Setting Selecting the display when alternating to Auxiliary input source. 1 Select Auxiliary input source Press the [SRC] button. Select the " AUX"/" AUX EXT" display. 2 Enter Menu mode Press the [MENU] button f or at least 1 second.
English | 25 In Standby mode Demonstration mode Setting Sets the demonstration mode. 1 Select the Demonstration mode Push the Contr ol knob towards [FM] or [ AM]. Select the "DEMO" display. 2 Set the Demonstration mode Press the C ontrol knob for at least 2 seconds.
26 | English Basic Operations of r emote contr ol Loading and Replacing the battery Use two " AA "/ "R6"-size batteries. Slide the cover while pr essing downwards to remove it as illustrated . Inser t the batteries with the + and – poles alig ned properly , following the illustration inside the case .
English | 27 Audio C ontrol [A UD] button Selects the Audio item to be adjusted. [VOL] buttons Adjusts the Audio item. • Refer to <Audio C ontrol> (page 9) for the operation method, such as the procedures f or Audio control and others operations.
28 | English Ac cessories/ Installation P rocedure Ac cessories 1 ..........1 2 ..........1 3 ..........1 4 ..........6 5 ..........6 6 ..........1 7 ..........2 Installation Proc edure 1. T o prevent a shor t circuit, r emove the key from the ignition and disconnect the - battery.
English | 29.
30 | English Installing the Escutcheon For Gener al Motors 1 Ref er to the section <Removing the Hard Rubber F rame> (page 32) and then remove the hard rubber frame . 2 C ut out accessor y 2 to meet the shape of the opening of the center console.
English | 31 Installing the Unit Installation Accessory 4 (M5 × 7 mm) or Accessory 5 (M5 × 6 mm) Installing in Japanese-Made Cars and General Motors Cars Install onto the car bracket using the supplied screws (M5 × 6 mm, M5 × 7 mm). The holes of the car bracket to use will differ depending on the car model.
32 | English Removing the Hard Rubber F rame (escutcheon) 1 Engage the cat ch pins on the removal tool 7 and remove the two locks on the lower level . L ower the frame and pull it forward as shown in the figure. 2 When the low er level is removed, r emove the upper two locations.
English | 33 T roubleshooting Guide What might seem to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Befor e calling ser vic e, first check the following table f or possible problems. General ? The pow er does not turn ON.
34 | English T roubleshooting Guide Disc source ? " AUX EXT" is display ed without achieving External disc control mode. ✔ Unsupported disc changer is connected. ☞ Use the disc changer mentioned in the <About CD players/disc changers connected to this unit> (page 4) of the section on <Safety precautions>.
English | 35 The messages shown belo w display your systems condition. EJEC T: No disc magazine has been loaded in the changer . The disc magazine is not completely loaded. ➪ Load the disc magazine properly . No CD in the unit. ➪ Inser t the CD. NO DISC: No disc has been loaded in the disc magazine.
36 | English Audio section Maximum output power : 50 W x 4 F ull Bandwidth Power (at less than 1% THD) : 22 W x 4 Speaker impedance : 4 – 8 Ω T one action Bass : 100 Hz ± 8 dB Middle : 1 kH z ± .
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Kenwood DPX301 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Kenwood DPX301 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Kenwood DPX301, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Kenwood DPX301 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Kenwood DPX301, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Kenwood DPX301.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Kenwood DPX301. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Kenwood DPX301 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
