Manuel d'utilisation / d'entretien du produit DPX-MP4050B du fabricant Kenwood
Aller à la page of 38
DPX-MP4050B DPX-MP4050 DPX-3050B DPX-3050 DPX - MP4030 DPX - 3030S DPX - 3030 © B64-2319-20/06 (M;TKR) DOUBLE DIN SIZED CD/CASSETTE RECEIVER INSTRUCTION MANUAL DPX-MP4050(M-TKR)(E) 2003.
— 2 — English Contents Safety precautions ......................3 About CDs ...................................5 About Cassette tape ..............
— 3 — Safety precautions To prevent injury or fire, take the following precautions: •I nsert the unit all the way in until it is fully locked in place. Otherwise it may fall out of place when jolted. • When extending the ignition, battery , or ground wires, make sure to use automotive- grade wires or other wires with a 0.
— 4 — English Safety precautions • If you experience problems during installation, consult your Kenwood dealer . • If the unit does not seem to be working right, try pressing the reset button first. If that does not solve the problem, consult your Kenwood dealer .
— 5 — About CDs Handling CDs •D on’t touch the recording surface of the CD. • CD-R and CD-RW are easier to damage than a normal music CD. Use a CD-R or a CD-RW after reading the caution items on the package etc. •D on’t stick tape etc. on the CD.
— 6 — English Notes on playing MP3 (DPX-MP4050B/ DPX-MP4050/ DPX-MP4030) This unit can play MP3(MPEG1, 2, 2.5 Audio Layer 3). Note, however , that the MP3 recording media and formats acceptable are limited. When writing MP3, pay attention to the following restrictions.
— 7 — MP3 playing order When selected for play , Folder Search, File Search, or for Folder Select, files and folders are accessed in the order in which they were written by the CD writer . Because of this, the order in which they are expected to be played may not match the order in which they are actually played.
Tu rning the volume down quickly . Press the [A TT] button. Each time the button is pressed the Attenuator turns ON or OFF . Attenuator Increasing V olume Press the [ u ] button. Decreasing V olume Press the [ d ] button. V olume Press the [SRC] button.
Adjusting the effect of an Equalizer type selected in <Equalizer Control> when <Equalizer mode> is "EASY". 1 Refer to <Equalizer Control> (page 9) to select the Equalizer type. 2 Adjust the effect Press the [FM] or [AM] button.
1 Enter the Audio Control mode Press the [AUD] button for at least 1 second. "AUD mode" is displayed. 2 Select the Audio item for adjustment Press the [FM] or [AM] button. Each time the button is pressed, the items that can be adjusted switch as shown below .
Selecting the Spectrum Analyzer display . 1 Enter the Spectrum Analyzer Select mode Press the [S.A] button for at least 1 second. "SPEANA" is displayed.
Switching the information displayed. Press the [DISP] button. Each time the button is pressed the display switches as shown below . In T uner source Information Display Frequency Station name "SNPS" Charactor Clock Switching Display • When operation stops for 10 seconds the name at that time is registered, and Name Set mode closes.
Setting the color of the display . 1 Enter the Illumination Color Select mode Press the [COLOR] button. "Illumi" is displayed. 2 Select the Illumination Color Press the [COLOR] button.
1 Select the clock display Press the [DISP] button. 2 Enter clock adjustment mode Press the [DISP] button for at least 1 second. The ‡ indicator blinks. 3 Adjust the hours Press the [FM] or [AM] button. Adjust the minutes Press the [ 4 ] or [ ¢ ] button.
Entering the frequency and tuning. 1 Select the band Press the [FM] or [AM] button. 2 Enter Direct Access T uning mode Press the [DIRECT] button on the remote. "– – – –" is displayed. 3 Enter the frequency Press the number buttons on the remote.
Changing the tuning frequency step. The original setting is FM band 50 kHz, and AM band 9 kHz. 1 Tu rn the power OFF Press the [SRC] button for at least 1 second. 2 Switch the frequency step While pressing the [1] and [5] button, press the [SRC] button.
Press the [B.NR] button. Each time the button is pressed the Dolby B NR turns ON or OFF . When it's ON, "B NR On" is displayed. Dolby B NR Fast Forwarding Press the [FM] button. When it's stopped press the [ 38 ] button. Rewinding Press the [AM] button.
Playing the first part of each song on the tape you are listening to and searching for the song you want to listen to. 1 Start Index Scan Press the [SCN] button. "IDX Scan" is displayed. 2 Release it when the song you want to listen to is played Press the [SCN] button.
CD/MP3/External disc control features Repeating the present song. Press the [REP] button. Each time the button is pressed the Music Repeat turns ON or OFF . When it's ON, "Repeat" is displayed. Music Repeat — 19 — DISP NAME COLOR S.
Selecting the disc you want to hear . Press the [DISC–] or [DISC+] button. Disc Search (Function of disc changer) Selecting the song you want to hear . Searching for a song on the disc or in the MP3 folder . Press the [ 4 ] or [ ¢ ] button. T rack/ File Search Fast Forwarding Hold down on the [ ¢ ] button.
Playing the first part of each song on the disc or MP3 folder you are listening to and searching for the song you want to listen to. 1 Start T rack Scan Press the [SCN] button. "Scan" is displayed. 2 Release it when the song you want to listen to is played Press the [SCN] button.
Scrolling the displayed CD text, MP3 text, or MD title. Press the [SCRL] button. T ext/T itle Scroll <Folder name display> Displays the current folder name. 2 Select the folder level Press the [FM] or [AM] button. With the [FM] button you move 1 level down and with the [AM] button 1 level up.
Setting during operation beep sound etc. functions. The Function Set basic operation method is explained here. The reference for the Function items and their setting content is after this operation explanation. 1 Enter Function Set mode Press the [FNC] button for at least 1 second.
Setting the method of adjusting Equalizer types. 1 Select Equalizer mode Press the [FM] or [AM] button. Select the "EQ" display . 2 Select the method of adjusting Equalizer types Press the [ 4 ] or [ ¢ ] button for at least 1 second.
Noise can be reduced when stereo broadcasts are received as monaural. Display Setting "MONO Off" The monaural reception is OFF . "MONO On" The monaural reception is ON. Monaural Reception <In FM reception> <In T uner mode> Sets the tuning mode.
Basic Operations of remote <In CD/MP3/External disc control mode> Setting the displayed text scroll. Display Setting "SCL Auto" Repeats scroll.
[ 4 ]/ [ ¢ ] buttons Do <DPSS (Direct Program Search System)> (page 18). [ 38 ] button Plays the reverse side of the tape. [FM] button Fast forwards the tape. When the [ 38 ] button is pressed it releases. [AM] button Rewinds the tape. When the [ 38 ] button is pressed it can be released.
[ 4 ]/ [ ¢ ] buttons Doing track/ file forward and backward. [DISC+]/ [DISC–] buttons Doing disc/ folder forward and backward. [ 38 ] button Each time the button is pressed the song pauses and plays. [0] — [9] buttons When in <Direct T rack Search> (page 21) and <Direct Disc Search> (page 21), enter the track/disc number .
— 29 — — 29 — The use of any accessories except for those provided might result in damage to the unit. Make sure only to use the accessories shipped with the unit, as shown above. 1. T o prevent a short circuit, remove the key from the ignition and disconnect the - battery .
English — 30 — — 30 — Connecting Wires to T erminals + + + + – + P.CONT ILLUMI FRONT R FRONT L REAR L REAR R ANT CONT FRONT NON FADING REAR KENWOOD disc changer control input To connect the Disc changer , consult your Disc changer manual.
— 31 — — 31 — Installation Installation ■ When performing a check of the CD operation prior to installation, place this unit in a horizontal position and perform a loading/eject of the CD. 2 CAUTION Install onto the car bracket using the supplied screws (M5 × 6 mm, M5 × 7 mm).
English — 32 — What might seem to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Before calling service, first check the following table for possible problems. General ? The power does not turn ON. 01 ✔ The fuse has blown.
— 33 — T uner source ? Radio reception is poor . 39 ✔ The car antenna is not extended. ☞ Pull the antenna out all the way . ✔ The antenna control wire is not connected. 40 ☞ Connect the wire correctly , referring to the section on <Connecting Wires to T erminals> (page 30).
English — 34 — ? Can’ t remove disc. 64 ✔ The cause is that more than 10 minutes has elapsed since the vehicle ACC switch was turned OFF . ☞ The disc can only be removed within 10 minutes of the ACC switch being turned OFF . If more than 10 minutes has elapsed, turn the ACC switch ON again and press the Eject button.
— 35 — ? The songs in the selected folder aren’ t played in Folder Select mode. 77 ✔ There are no MP3 in the selected folder . ☞ Make sure there’ s recorded content in the MP3 media. ? The MP3 File/Folder search takes time. 78 ✔ Many files are recorded on the media.
English — 36 — Error 99: Something is wrong with the disc magazine. Or the unit is malfunctioning for some reason. E99 ➪ Check the disc magazine. And then press the reset button on the unit. If the "Error 99" code does not disappear , consult your nearest service center .
— 37 — Specifications Specifications subject to change without notice. FM tuner section Frequency range (50 kHz space) ..............87.5 MHz – 108.0 MHz Frequency range (200 kHz space) ............87.9 MHz – 107.9 MHz Usable sensitivity (S/N = 30 dB) .
DPX-MP4050(M-TKR)(E) 2003.02.14 09:03 AM Page 38.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Kenwood DPX-MP4050B c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Kenwood DPX-MP4050B - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Kenwood DPX-MP4050B, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Kenwood DPX-MP4050B va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Kenwood DPX-MP4050B, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Kenwood DPX-MP4050B.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Kenwood DPX-MP4050B. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Kenwood DPX-MP4050B ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
