Manuel d'utilisation / d'entretien du produit HL200 du fabricant Hobart
Aller à la page of 111
HL 200 MIXER TECHNIC AL MANUAL SPECIFIC A TION SHEET INSTALL A TION INS TRUCTIONS OPERATION INSTRUCTIONS CLEANING INS TRUCTIONS M AI N T E N AN C E INS TRUCTIONS TROUBLE SHOOTI NG INSTRUCTI ONS WIRING.
Need other Hobart Services? • Warranty Reg istrat ion • Deliv ery and Instal latio n • Prev entiv e Maintena nce • Hobart S erv ice Contr act s • Extended Warranty Contracts • Parts a nd A.
Item # _____________________________________ Quantity ___________________________________ C.S.I. Section 11400 F-40089 – Legacy ® HL200 Mixer Page 1 of 4 LEGACY ® HL200 MIXER 701 S Ridge Avenue, Troy, OH 45374 1-888-4HOBART • www.hobartcorp.com LEGACY ® HL200 MIXER STANDARD FEATURES ■ Heavy-Duty 1 ⁄ 2 H.
701 S Ridge Avenue, Troy, OH 45374 1-888-4HOBART • www.hobartcorp.com LEGACY ® HL200 MIXER Page 2 of 4 F-40089 – Legacy ® HL200 Mixer SOLUTIONS/BENEFITS 1 ⁄ 2 H.
701 S Ridge Avenue, Troy, OH 45374 1-888-4HOBART • www.hobartcorp.com F-40089 – Legacy ® HL200 Mixer Page 3 of 4 LEGACY ® HL200 MIXER SPECIFICATIONS MOTOR: 1 ⁄ 2 H.P. high torque motor. 100-120/50/60/1 8.0 Amps 200-240/50/60/1 5.0 Amps ELECTRICAL: 100-120/50/60/1, 200-240/50/60/1 – UL Listed.
701 S Ridge Avenue, Troy, OH 45374 1-888-4HOBART • www.hobartcorp.com Page 4 of 4 F-40089 – Legacy ® HL200 Mixer As continued product improvement is a policy of Hobart, specications are subject to change without notice. LEGACY ® HL200 MIXER F-40089 (REV .
F34922 Rev . D (Nov . 2008) Models HL120 ML-134296 HL200 ML-134331 HL200 ML-134289 PRIOR ML’S COVERED IN TH I S HL200 ML-134308 INSTRUCTION MANUAL 7 0 1 S . R I D G E A V E N U E T R O Y , O H I O 4 5 3 7 4 - 0 0 0 1 9 3 7 - 3 3 2 - 3 0 0 0 · W W W .
2 TABLE OF CONTENTS GENERAL ............................................................................................... 3 INSTALLATION ............................................................................................... 3 Unpacking ....
3 Installation, Operation and Care of Legacy T M 12 & 20-Quart Mixers SAVE THESE INSTRUCTIONS GENERAL Th e Le g ac y 12 -q u ar t mi xe r is a be n ch -t yp e mi x er w hi ch f ea tu re s a S m a r t T i m e r ™ , a ma n u a l bo w l lift and a #12 attach ment hub as standard equip ment.
EL EC TR ICA L CO NN EC TIO NS ( Cor d Co nn ec ted M ix ers ) WARNING: THE ELECTRICAL CORD ON THIS MACHINE IS EQUIPPED WITH A THREE- PRONGED GROUNDING PLUG WHICH MUST BE CONNECTED TO A PROPERLY GROUNDED RECEPTACLE. IF THE RECEPTACLE IS NOT THE PROPER GROUNDING TYPE, CONTACT AN ELECTRICIAN.
OPERATION WARNING: MOVING AGITATOR IN BOWL. KEEP HANDS, CLOTHING, AND UTENSILS OUT OF BOWL WHILE IN OPE RATION. DO NOT USE WITHOUT I NTERLOCKED GUARD. The Legacy mixer is equipped with SmartTim er TM cont rol s. Refe r t o Fi g. 1 for operating parts and OPERATION section for their functions.
Standard Controls Models HL120/HL200 (With Thr ee Mix Speeds Plu s Stir Speed) DISPLAY MIXING TIME STOPS MIXER STARTS MIXER TIME SELECTOR Fig. 2 SPEED SELECTOR HL120/HL200 Mixer S peeds S T I R ( S l o w ) T h e l o w e s t s p e e d i s f o r i n c o r p o r a t i n g i n g r e d i e n t s .
Recipe Timer (Optional) Models HL120/HL200 (With Thr ee Mix Speeds Plu s Stir Speed) Fig. 15 The SmartPlus2 ™ recipe timer h as two operating modes, Stan dard (STD) and RECIPE. Standard Mo de Operates exactl y as the standard controls utilizing continuous and timed mixing.
BOWL PLACEMENT The bowl must be installed be fore the agit ator is inst alled. To install t he bowl, lower the bowl support and position b owl so the alig nment pins on t he left side of the bowl sup port fit in the holes in the bowl tab. (Fig . 3) Plac e the slotted t ab on bowl into the low er part of the pin.
PREPAR E FOR MI XING 1. Place the mixing bowl on the b owl support. 2. Pour ingred ients into the bow l. 9 3. Swing th e bowl back to the mix position . 4. Place the a gitator inside the bowl, and then attach it to th e agitator shaft (Fig. 6). 5. Lift bowl sup port.
Using the Count-Down Mode (T imed Mixing) 1. Turn the SPEED dial to s elect a mix speed. a. If the count-u p mode was used for the previous batch, th e desired time nee ds to be entered. b. If the count-down mo de was used for the previous b atch, the previous time will be d i s p l a y e d .
RECIPE TIMER OPERATI ON Re ci pe T ime r N ot es x If pause is selected as a mix speed, the mi xer START button must be presse d to advance to the next recipe step after the pause time has expired. x If pause has been sel ected, the bowl guard can be opened and the ti me will continue to count down.
View Recipe When the mixe r is in RECIPE mode, you can vie w the step settings of an y recipe. 1 . P r e s s t h e S E L E C T / S A V E b u t t o n . A . Display will alternate between speed an d time. B . The LED of the step being displaye d will flash.
13 NOTES: x If a value has been assigned for a step number, that LED will be lit. x The LED for the selected step will blink. x If the default value is still assigned to a step, the LED will not be lit. x When programming, the Recipe and Time Selectors are disabled.
UNLOADING 1 . Open the bowl guard wire cage assembly. 2 . Lower bowl support. 3 . Remove the agitator from the agitator shaft. 4. Slightly lift the bowl off th e pin (right side ), pull bow l to the fron t and remove from the bowl support (left sid e).
Remove and Clea n Bowl Guard Wir e Cage (F i g . 1 1 ) 1. Rotate wire cage to your left until the three carrier s align with t he carrier escape slots in the circular ridge of the pla netary drip cup. 2. Lift the wire cage straight up so t he carriers escape from the slots on the drip cup.
AGITATORS AND ATTACHMENTS Attachmen ts for attachme nt hub and agitat ors are covere d in a separate Hob art Legacy Mixer Use an d A p p l i c a t i o n H a n d b o o k o n t h e M i x e r O p e r a t o r I n f o r m a t i o n C D . F o l l o w t h e i n s t r u c t i o n s accordingly.
12 & 20 Qt. P Pasty Knife 12 & 20 Qt. Ingredient Chute 12 & 20 Qt. Table CLEANING WARNING: UNPLUG MACHINE POWER CORD BEFORE BEGINNING ANY CLEANING PROCEDURES. The mixer should be thoroug hly cleaned daily. DO NOT use a hose to cle an the mixer; it sh ou ld b e washed wit h a clean, damp cloth.
MAINTENANCE WARNING: UNPLUG MACHINE POWER CORD BEFORE BEGINNING ANY MAINTENANCE PROCEDURES. Slideway Fig. 13 Fig. 12 Planetary Seal LUBRICATION S l i d e w a y s The slideways (Fig. 12) should be lubricated approximately twice a year. To reach these areas, fully lower the bowl support and remove the apron, which is secured by slotted screws.
ADJUSTMENTS Agitator Clearanc e T h e a g i t a t o r c l e a r a n c e s h o u l d b e c h e c k e d p e r i o d i c a l l y . T h e a g i t a t o r m u s t n o t t o u c h t h e b o w l and the maxi.
20 F34922 Rev D (Nov . 2008) PRINTED IN U.S.A. HL200 Mixer Technical Manual Page 26 of 111.
USE AND APPLICA TIONS HANDBOOK For Mixer Attachments and Accessories FORM 34901 Rev D (May 2007) ® HL200 Mixer Technical Manual Page 27 of 111.
2 HL200 Mixer Technical Manual Page 28 of 111.
3 Economical, Dependable, V ersatile . . . Y our Hobart Mixer The Hobart Mixer brings pro fi t to your operation every time you use it. Uniform and consistent mixing reduces waste and improves process control. Smooth surfaces and durable construction make cleanup fast and easy .
4 Beaters, Whips, Dough Hooks, Pastry Knives . . . and How to Use Them This section illustrates and names the various mixer agitators and discusses their applications. General information on how to get the best results from your Hobart mixer is also provided.
5 The ED Dough Hook is used for mixing most bread, roll and pizza doughs which require folding and stretching action for best development. These agitators are suitable for use on all yeast raised doughs and should be operated in fi rst, second or third speed.
6 FORMULAS AND METHODS Use your own formula for any products you wish to make in your Hobart mixer . Then evaluate the fi nished product for texture, conformity , lightness, fl akiness, etc. Y ou will fi nd that any method of blending ingredients can be duplicated or improved with your machine.
7 The ingredient percentages are based on a fl our content of 100 percent to simplify using the recipes to make various sized batches and compute the moisture absorption ratio. The heavy bread dough recipe above is a criterion listed in Section 4.4.2 of Federal Speci fi cation 00-M-0038K, Standard for Electric Food Mixing Machines.
8 When mixing any of the above products with an absorption ratio lower than listed, decrease the batch size proportionately to assure ef fi cient mixing of the product and thus eliminate the possibility of overloading your mixer .
9 Mixer Capacity Chart — HL120 & HL200 Recommended Maximum Capacities — dough capacities based on 70°F water and 12% fl our moisture. ABBREVIA TIONS - AGIT A T ORS SUIT ABLE FOR OPERA TION B.
10 Mixer Capacity Chart — HL300 & HL400 Recommended Maximum Capacities — dough capacities based on 70°F water and 12% fl our moisture. ABBREVIA TIONS - AGIT A T ORS SUIT ABLE FOR OPERA TION .
11 Mixer Capacity Chart — HL600 & HL662 Recommended Maximum Capacities — dough capacities based on 70°F water and 12% fl our moisture. AGIT A TORS PRODUCT SUIT ABLE FOR HL600 HL662 OPERA TION CAP ACITY OF BOWL (QTS. LIQUID) 60 60 Egg Whites D 2 qts.
12 Mixer Capacity Chart — HL800 & HL1400 Recommended Maximum Capacities — dough capacities based on 70°F water and 12% fl our moisture. AGIT A TORS PRODUCT SUIT ABLE FOR HL800 HL1400 OPERA TION CAP ACITY OF BOWL (QTS. LIQUID) 80 140 Egg Whites D 2 qts.
13 CREAMING OR RUBBING WITH THE B FLA T BEA TER When making cakes or similar products, the fi rst step is normally rubbing or creaming the shortening. Start this work on fi rst speed and complete it on second speed. If a very light consistency is desired, it may be beaten on third speed before adding more ingredients.
14 WHIPPING Use either the D Wire Whip or the C Wing Whip for whipping operations. Although some special operations require other adaptations of the same general type of agitator , our discussion centers on the D Wire Whip and the C Wing Whip. The D Wire Whip (sometimes called balloon or cage whip) is recommended for whipping cream.
15 The D Wire Whip is generally used for eggs. When you whip only egg whites, begin in fi rst speed. When the material begins to expand, progress to second speed.
16 MA YONNAISE The C Wing Whip, because of its strength, high ef fi ciency and durability when used on larger mixers, is most commonly used for making mayonnaise. However , the D Wire Whip may be preferred when making very light batches or when using step-down bowls.
17 Attachments and Accessories Several valuable time and labor saving attachments and accessories are available for use with Hobart mixers. These tools will extend your usage of the mixer and enhance your operation by ef fi ciently producing additional consistent, uniform products.
18 MEA T CHOPPER A TT ACHMENT The Meat Chopper Attachment allows you to prepare many additional foods with your Hobart mixer . A plate having 1 / 8 " holes comes with the Meat Chopper Attachment when shipped from the factory .
19 INGREDIENT CHUTE The Ingredient Chute can be attached to the Wire Cage on the Bowl Guard. The Ingredient Chute allows ingredients to be added to the bowl while the mixer is mixing.
20 BOWL TRUCK Bowl T rucks or dollies provide convenience, save time, and reduce effort in handling large batches. Use a Bowl T ruck for any batches over 50 pounds. Remove heavy batches of dough or batter from the mixer by unlocking the bowl and lowering the bowl to the Bowl T ruck.
21 NOTES HL200 Mixer Technical Manual Page 47 of 111.
22 NOTES HL200 Mixer Technical Manual Page 48 of 111.
Backing Up Y our Purchase . . . . Dependable Hobart Service Should your Hobart mixer , attachments or accessories ever require service, it’s good to know that more than 1600 factory trained technicians in more than 200 Hobart service facilities nationwide, can keep your mixer working like new .
FORM 34901 Rev D (May 2007) PRINTED IN U.S.A. HL200 Mixer Technical Manual Page 50 of 111.
U V L1 L2 L1/L 1MTR AC INDUCTION MOTOR 13 12 T1-BLUE T3-ORANGE FWD PLC MIXER RUN 24 VDC GND DISPLA Y 30C 30B 1K 0 1 1CR TIMER READY OUTPUT 1LS BOWL GUARD SWITCH L2/N GROUND 8 4 6 2 CONT ACT -NORMALL Y OPEN (N.O.) CONT ACT -NORMALL Y CLOSED (N.C.) GND GROUND PB PUSH BUTTON-STOP (N.
MIXER MOTOR ASSEMBL Y 874781 917819 T3 T1 T2 X3 X2 X1 PLC Y1E Y1 30C 30B 30A 11 12 13 CM1 FWD CM2 U V W L2/N L1/L GND GND MOTOR DRIVE RS 485 WHITE BLACK GREEN BOWL GUARD SWITCH 0 1 7 3 8 4 6 2 BOWL SW.
CA T ALOG OF REPLACEMENT P ARTS LEGACY MIXER HL120 ML-134459 HL200 ML-134455 HL200C ML-134456 HL200 ML-134457 HL200 ML-134458 A product of HOBART 701 S.
- 2 - HL120/HL200 LEGACY MIXER REPLACEMENT P ARTS F-43177 (May 2009) © HOBART 2009 HL200 Mixer Technical Manual Page 54 of 111.
- 3 - HL120/HL200 LEGACY MIXER REPLACEMENT P ARTS F-43177 (May 2009) T able of Contents 5 CONTROL P ANEL 6 ELECTRICAL COMPONENTS 7 A TT ACHMENT HUB 9 BASE AND PEDEST AL 1 1 FLOOR BASE AND PEDEST AL (M.
- 4 - HL120/HL200 LEGACY MIXER REPLACEMENT P ARTS F-43177 (May 2009) 1 2 3-4 6 7-8 9 10 11 PL-58126 12 13 14 15 16 5 CONTROL P ANEL HL200 Mixer Technical Manual Page 56 of 111.
- 5 - HL120/HL200 LEGACY MIXER REPLACEMENT P ARTS F-43177 (May 2009) CONTROL P ANEL ILLUS. P ART NO. NAME OF P ART AMT . PL-58126 1 00-874831 Switch – Speed Selector Assy . ............................................................................
- 6 - HL120/HL200 LEGACY MIXER REPLACEMENT P ARTS F-43177 (May 2009) ELECTRICAL COMPONENTS ILLUS. P ART NO. NAME OF P ART AMT . PL-58127 1 SC-018-38 Mach. Screw 8-32 x 1 / 2 Slotted Pan Hd...............................................................
- 7 - HL120/HL200 LEGACY MIXER REPLACEMENT P ARTS F-43177 (May 2009) A TT ACHMENT HUB ILLUS. P ART NO. NAME OF P ART AMT . PL-57679 1 00-917221 Plug – Attachment .......................................................................................
- 8 - HL120/HL200 LEGACY MIXER REPLACEMENT P ARTS F-43177 (May 2009) BASE AND PEDEST AL PL-58131 23 19 20 21 24 25 18 22 17 32 33 34 16 1 2 3 5-6 7-8 4 12-13 14 26 27 28 35 36 38 9 10 15 11 37 29 30 3.
- 9 - HL120/HL200 LEGACY MIXER REPLACEMENT P ARTS F-43177 (May 2009) BASE AND PEDEST AL ILLUS. P ART NO. NAME OF P ART AMT . PL-58131 1 00-916262 Cover – T op...........................................................................................
- 10 - HL120/HL200 LEGACY MIXER REPLACEMENT P ARTS F-43177 (May 2009) FLOOR BASE AND PEDEST AL (ML-134458) PL-58132 8 7 3 2 1 16 11 6 4 5 13 14 15 12 9 10 HL200 Mixer Technical Manual Page 62 of 111.
- 1 1 - HL120/HL200 LEGACY MIXER REPLACEMENT P ARTS F-43177 (May 2009) FLOOR BASE AND PEDEST AL (ML-134458) ILLUS. P ART NO. NAME OF P ART AMT . PL-58132 1 00-916548-00002 Block – Riser ...............................................................
- 12 - HL120/HL200 LEGACY MIXER REPLACEMENT P ARTS F-43177 (May 2009) BOWL SUPPORT ILLUS. P ART NO. NAME OF P ART AMT . PL-58128 1 00-874726 Pin – Bowl (LH) ............................................................................................
- 13 - HL120/HL200 LEGACY MIXER REPLACEMENT P ARTS F-43177 (May 2009) TRANSMISSION CASE AND MOTOR ILLUS. P ART NO. NAME OF P ART AMT . PL-58129 1 NS-032-23 Lock Nut 7 / 16 -20 Special ...................................................................
- 14 - HL120/HL200 LEGACY MIXER REPLACEMENT P ARTS F-43177 (May 2009) TRANSMISSION 1 19-20 21 24 2 3 4 5 18 25 28-29 26 6 7 8 36 27 30 31 32 33 34 35 9 11 13 14 15 16-17 10 12 PL-58130 22-23 HL200 Mix.
- 15 - HL120/HL200 LEGACY MIXER REPLACEMENT P ARTS F-43177 (May 2009) TRANSMISSION ILLUS. P ART NO. NAME OF P ART AMT . PL-58130 1 NS-032-37 Lock Nut 5 / 8 -18 Special ...................................................................................
- 16 - HL120/HL200 LEGACY MIXER REPLACEMENT P ARTS F-43177 (May 2009) PLANET ARY 13 14 15 19 20 21 22 1 9 16 18 17 11 5 6 8 7 10 12 4 2 3 PL-57685 HL200 Mixer Technical Manual Page 68 of 111.
- 17 - HL120/HL200 LEGACY MIXER REPLACEMENT P ARTS F-43177 (May 2009) PLANET AR Y ILLUS. P ART NO. NAME OF P ART AMT . PL-57685 1 00-438524-00002 Gear – Internal .......................................................................................
- 18 - HL120/HL200 LEGACY MIXER REPLACEMENT P ARTS F-43177 (May 2009) BOWL AND BOWL GUARD 1 7 15 19 27 29 28 23 24 26 25 22 21 20 2 13 14 12 3 4 16 18 17 5 8 9 6 10 11 PL-58133 20 QUART BOWL 12 QUART .
- 19 - HL120/HL200 LEGACY MIXER REPLACEMENT P ARTS F-43177 (May 2009) BOWL AND BOWL GUARD ILLUS. P ART NO. NAME OF P ART AMT . PL-58133 1 SC-129-39 Mach. Screw 6-32 x 5 / 16 Slotted Oval Hd. ............................................................
- 20 - HL120/HL200 LEGACY MIXER REPLACEMENT P ARTS F-43177 (May 2009) AGIT A TORS AND ACCESSORIES 1 23 4 5 6 13 14 15 16 17 18 78 9 1 01 1 1 2 PL-57686 HL200 Mixer Technical Manual Page 72 of 111.
- 21 - HL120/HL200 LEGACY MIXER REPLACEMENT P ARTS F-43177 (May 2009) AGIT A TORS AND ACCESSORIES ILLUS. P ART NO. NAME OF P ART AMT . PL-57686 1 00-913049 Scraper – Bowl ..............................................................................
- 22 - HL120/HL200 LEGACY MIXER REPLACEMENT P ARTS F-43177 (May 2009) MIXER T ABLE (ML-134299) PL-57731 11 12 13 5 15 9 14 7 1 2 16 17 19 8 4 3 6 18 20 10 HL200 Mixer Technical Manual Page 74 of 111.
- 23 - HL120/HL200 LEGACY MIXER REPLACEMENT P ARTS F-43177 (May 2009) MIXER T ABLE (ML-134299) ILLUS. P ART NO. NAME OF P ART AMT . PL-57731 1 00-124075 Post .............................................................................................
FORM 43177 MA Y 2009 PRINTED IN U.S.A. HL120/HL200 LEGACY MIXER REPLACEMENT P ARTS WIRING HARNESS 00-917132-00001 Harness - Main Wiring PL-58135 HL200 Mixer Technical Manual Page 76 of 111.
CA T ALOG OF REPLACEMENT P ARTS LEGACY MIXER HL120 ML-134296 HL200 ML-134289 HL200 ML-134331 HL200C ML-134312 HL200 ML-134308 A product of HOBART 701 S.
- 2 - HL120/HL200 LEGACY MIXER REPLACEMENT P ARTS F-43101 Rev . A (May 2006) © HOBART HL200 Mixer Technical Manual Page 78 of 111.
- 3 - HL120/HL200 LEGACY MIXER REPLACEMENT P ARTS F-43101 Rev . A (May 2006) T able of Contents 5 CONTROL P ANEL 6 ELECTRICAL COMPONENTS 7 A TT ACHMENT HUB 9 BASE AND PEDEST AL 1 1 FLOOR BASE AND PEDE.
- 4 - HL120/HL200 LEGACY MIXER REPLACEMENT P ARTS F-43101 Rev . A (May 2006) 1 2 5 6-7 8 9 1 0 3-4 PL-58126 1 1 1 2 1 3 1 4 1 5 CONTROL P ANEL HL200 Mixer Technical Manual Page 80 of 111.
- 5 - HL120/HL200 LEGACY MIXER REPLACEMENT P ARTS F-43101 Rev . A (May 2006) CONTROL P ANEL ILLUS. P ART NO. NAME OF P ART AMT . PL-58126 1 00-874831 Switch – Speed Selector Assy . ....................................................................
- 6 - HL120/HL200 LEGACY MIXER REPLACEMENT P ARTS F-43101 Rev . A (May 2006) ELECTRICAL COMPONENTS ILLUS. P ART NO. NAME OF P ART AMT . PL-58127 1 SC-018-38 Mach. Screw 8-32 x 1 / 2 Slotted Pan Hd. .....................................................
- 7 - HL120/HL200 LEGACY MIXER REPLACEMENT P ARTS F-43101 Rev . A (May 2006) A TT ACHMENT HUB ILLUS. P ART NO. NAME OF P ART AMT . PL-57679 1 00-1 14824-00001 Plug – Attachment ........................................................................
- 8 - HL120/HL200 LEGACY MIXER REPLACEMENT P ARTS F-43101 Rev . A (May 2006) BASE AND PEDEST AL PL-58131 2 4 2 0 2 1 2 2 2 5 2 6 1 9 2 3 1 8 3 3 3 4 3 5 16-17 1 2 3 5-6 7-8 4 12-13 1 4 2 7 2 8 2 9 3 6.
- 9 - HL120/HL200 LEGACY MIXER REPLACEMENT P ARTS F-43101 Rev . A (May 2006) BASE AND PEDEST AL ILLUS. P ART NO. NAME OF P ART AMT . PL-58131 1 00-916262 Cover – T op ..................................................................................
- 10 - HL120/HL200 LEGACY MIXER REPLACEMENT P ARTS F-43101 Rev . A (May 2006) FLOOR BASE AND PEDEST AL (ML-134308& ML-134331) PL-58132 8 7 3 2 1 1 6 1 1 6 4 5 1 3 1 4 1 5 1 2 9 1 0 HL200 Mixer Tec.
- 1 1 - HL120/HL200 LEGACY MIXER REPLACEMENT P ARTS F-43101 Rev . A (May 2006) FLOOR BASE AND PEDEST AL (ML-134308 & ML-134331) ILLUS. P ART NO. NAME OF P ART AMT . PL-58132 1 00-916222-00002 Block – Riser .......................................
- 12 - HL120/HL200 LEGACY MIXER REPLACEMENT P ARTS F-43101 Rev . A (May 2006) BOWL SUPPORT ILLUS. P ART NO. NAME OF P ART AMT . PL-58128 1 00-874726 Pin – Bowl (LH) ....................................................................................
- 13 - HL120/HL200 LEGACY MIXER REPLACEMENT P ARTS F-43101 Rev . A (May 2006) TRANSMISSION CASE AND MOT OR ILLUS. P ART NO. NAME OF P ART AMT . PL-58129 1 NS-032-23 Lock Nut 7 / 16 -20 Special ..........................................................
- 14 - HL120/HL200 LEGACY MIXER REPLACEMENT P ARTS F-43101 Rev . A (May 2006) TRANSMISSION 1 1 9 2 1 2 2 2 0 2 3 2 3 4 5 1 8 2 4 2 7 2 5 6 7 8 2 8 1 3 2 6 2 9 3 0 3 1 3 2 3 3 3 4 3 5 9 1 1 1 4 1 5 16-.
- 15 - HL120/HL200 LEGACY MIXER REPLACEMENT P ARTS F-43101 Rev . A (May 2006) TRANSMISSION ILLUS. P ART NO. NAME OF P ART AMT . PL-58130 1 NS-032-37 Lock Nut 5 / 8 -18 Special ...........................................................................
- 16 - HL120/HL200 LEGACY MIXER REPLACEMENT P ARTS F-43101 Rev . A (May 2006) PLANET ARY 1 1 1 2 2 0 1 6 1 7 1 8 1 9 1 1 0 1 5 1 3 1 4 8 5 6 7 9 4 2 3 PL-57685 HL200 Mixer Technical Manual Page 92 of .
- 17 - HL120/HL200 LEGACY MIXER REPLACEMENT P ARTS F-43101 Rev . A (May 2006) PLANET ARY ILLUS. P ART NO. NAME OF P ART AMT . PL-57685 1 00-438524-00002 Gear – Internal ................................................................................
- 18 - HL120/HL200 LEGACY MIXER REPLACEMENT P ARTS F-43101 Rev . A (May 2006) BOWL AND BOWL GUARD 1 7 1 5 1 9 2 7 2 9 2 8 2 3 2 4 2 6 2 5 2 2 2 1 2 0 2 1 3 1 4 1 2 3 4 1 6 1 8 1 7 5 8 9 6 1 0 1 1 PL-5.
- 19 - HL120/HL200 LEGACY MIXER REPLACEMENT P ARTS F-43101 Rev . A (May 2006) BOWL AND BOWL GUARD ILLUS. P ART NO. NAME OF P ART AMT . PL-58133 1 SC-129-39 Mach. Screw 6-32 x 5 / 16 Slotted Oval Hd. ....................................................
- 20 - HL120/HL200 LEGACY MIXER REPLACEMENT P ARTS F-43101 Rev . A (May 2006) AGIT A TORS AND ACCESSORIES 1 2 3 4 5 6 1 3 1 4 1 5 1 6 1 7 1 8 7 8 9 1 0 1 1 1 2 PL-57686 HL200 Mixer Technical Manual Pa.
- 21 - HL120/HL200 LEGACY MIXER REPLACEMENT P ARTS F-43101 Rev . A (May 2006) AGIT A TORS AND ACCESSORIES ILLUS. P ART NO. NAME OF P ART AMT . PL-57686 1 00-1 18801 Scraper – Bowl (Handheld) ..........................................................
- 22 - HL120/HL200 LEGACY MIXER REPLACEMENT P ARTS F-43101 Rev . A (May 2006) MIXER T ABLE (ML-134299) PL-57731 1 1 1 2 1 3 5 1 5 9 1 4 7 1 2 1 6 1 7 1 9 8 4 3 6 1 8 2 0 1 0 HL200 Mixer Technical Manu.
- 23 - HL120/HL200 LEGACY MIXER REPLACEMENT P ARTS F-43101 Rev . A (May 2006) MIXER T ABLE (ML-134299) ILLUS. P ART NO. NAME OF P ART AMT . PL-57731 1 00-124075 Post .....................................................................................
FORM 43101 Rev . A MA Y 2006 PRINTED IN U.S.A. HL120/HL200 LEGACY MIXER REPLACEMENT P ARTS WIRING HARNESSES 00-874804-00001 Harness - Po wer 00-874803-00002 Harness - Inter mediate 00-874888-00001 Har.
User Guide Online Parts Catalog Section 1 – If Equipment ML Number is known Section 2 – If Equipment ML Number is not known Note: It is helpful, but not essential to know the ML (Material List) Nu.
User Guide Next select SMARTPARTS From hobartservice.com select PARTS Web Browser Pop -up blocker must be turned off for this site in order fo r SmartParts to operate HL200 Mixer Technical Manual Page.
This is SmartParts home page If the ML Number of the Equipment is known , select Use SmartParts Now (We’ll explain w hat to do if the ML number of the Equipment is not known in Section 2) Enter the .
• Click on the Radio button to select the Parts Catalog Then click on Continue The Water Pressure Gauge is on the Base Assembly Select Base Assembly Then click on Continue Section 1 – If Equipment.
• Select an appropriate figure size Locate the part ne eded (Water Pressure Gauge) on the drawing Placing the cursor on the number will display the Description of the Part Click on the number pointi.
• Selecting the part on the figure causes the part to be highlight e d on the parts list • Click on the Add butto n to add the pa rt to the shoppin g cart • You can add more parts or change the .
Section 2 – If Equipment ML Number is not known This (again ) is SmartParts home page For this example, the part needed is a Water Pressure Gauge used on the LX 30 Undercounter Dishwasher If the ML .
Click on the Radio button to select LX Series Dishwashers Then click on Continue Section 2 – If Equipment ML Number is not known The Water Pressure Gauge is on the Base Assembly Select Base Assembly.
Locate the part ne eded (Water Pressure Gauge) o n the drawing Placing the cursor on the number will displ ay the Description of the Part Click on the num ber pointing to the part Section 2 – If Equ.
• Selecting the part on the figure causes the part to be highlight e d on the parts list • Click on the Add butto n to add the pa rt to the shoppin g cart • You can add more parts or change the .
Page 1 of 1 HL200 Mixer HL200 MIXER JANUARY 2010 PRODUCT SERVICE DEP ARTMENT TROY, OH. 45374-00 01 RECOMMENDED SPARE PARTS LIST HL200 LEGACY MIXER Qty Part Number Description 1 23482 S.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Hobart HL200 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Hobart HL200 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Hobart HL200, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Hobart HL200 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Hobart HL200, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Hobart HL200.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Hobart HL200. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Hobart HL200 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
