Manuel d'utilisation / d'entretien du produit IT640-ORA-W du fabricant Gorenje
Aller à la page of 20
Ceramic glass induction hob MT Instructions for use, installation, and connection IE GB.
243971 The built-in ceramic-glass cooktop is intended for household use only . Materials used for packaging are nature friendly and may be recycled, deposited or destroyed without any threats to the environment. In order to recognize these features, all packing materials are marked with relevant symbols.
243971 • The appliance may be built-in and connected to the power supply only by a quali fi ed technician. • Particular areas of the cooktop surface (adjacent to the hotplates) are hot during operation. Prevent the children to hang around the appliance and warn them properly against the danger of burns.
243971 A ON/OFF sensor B Hotplate power or remaining heat displays B1 Decimal dot on the power displays: - On : hotplate power control is possible - Off : hotplate power control is not possible C Hotp.
243971 • Ceramic glass hob is fi tted with four hotplates. Hob surface is completely fl at and smooth, without edges to accumulate dirt. • The hob is fi tted with high power induction hotplates. Heat is generated directly at the bottom of the dish, where it is most needed, without any losses through the ceramic glass surface.
243971 Magnet test Use small magnet to test if the dish bottom is magnetic. Only dishes where magnet sticks to the bottom are suitable for induction cooking.
243971 • When buying cookware be careful in selecting size: pot diameter usually refers to the top edge of the dish, which is often larger than the dish bottom. • Steam-pressure pots (economic pots), which use pressure in tightly sealed interior , are especially economic, and save both time and energy .
243971 • After turning the ceramic glass hob on all displays come on for a moment. The hob is ready for operation. • The hob is fi tted with electronic sensors which are switched on if you touch the relevant circle for at least one second. • Each sensor activation is followed by a sound signal.
243971 Fast deactivation • Selected hotplate must be activated, decimal dot (B1) is on. • Press both (+) and (-) (C and E) sensors simultaneously , and the hotplate is immediately switched off. • The hob can be switched off any time by pressing the ON/OFF sensor (A).
243971 During the time extra power is activated, the power of other hotplates is limited. This is indicated on the power display by intermittently showing the selected cooking level and limited power . Activating extra powerful setting • First select the hotplate by touching its relevant sensor , and immediately after press the sensor “P”.
243971 Hint • If the power selection knob remains at level 0 three seconds after the automatic fast heating is activated, that is if you fail to select the power setting for regular cooking, the fast heating function is switched off.
243971 Example: Set the hotplate to power level 6 and leave it operate for some time. If you do not change the above setting, the safety mechanism will switch the hotplate off after one hour and a half.
243971 Remaining cooking time Y ou can display the remaining cooking time by touching the hotplate ON/OFF sensor (C). Switching the timer off When the preset time expires a beep is heard which you can either turn off by touching any sensor or leave it to turn of f automatically after 2 minutes.
243971 • During the time the alarm is activated, timer can not be preset for any hotplate (to enable timer setting function, alarm must be switched off). The hob is equipped with the overheat safety sensors. When they are activated they turn off the hotplates nearest to the control board.
243971 Major stains are removed with special ceramic-glass cleansers. Follow strictly the manufacturer ’s instructions. Be careful to remove any remains of cleansing agent from the hob surface, otherwise they will be heated during the next use and can damage the hob ( fi g.
243971 Before inserting the appliance into the opening in the kitchen worktop, the supplied foam gasket must be attached to the lower side of the glass ceramic (glass) cooking hob (see fi gure above).
243971 empty and no objects may be stored or kept there. • Rear side of the kitchen element must also have a 140 mm high opening along the entire width of the element, and the front part must have an opening of no less than 6 mm.
243971 • The connection should be selected in accordance with the declared charge capacity of the mains and the fuse power . • Such appliances are allowed to be mounted on one side next to a high kitchen cabinet, the height of which may exceed that of the appliance.
WE RESERVE THE RIGHT TO AL TER THE SPECIFICA TIONS WITH NO INFLUENCE T O THE OPERA TION OF THE APPLIANCE. 243971 T echnical information Rating plate A Serial number B Code C Model D T ype E T rademark.
SIVK - ORA ITO 243971/en (04-10).
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Gorenje IT640-ORA-W c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Gorenje IT640-ORA-W - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Gorenje IT640-ORA-W, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Gorenje IT640-ORA-W va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Gorenje IT640-ORA-W, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Gorenje IT640-ORA-W.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Gorenje IT640-ORA-W. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Gorenje IT640-ORA-W ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
