Manuel d'utilisation / d'entretien du produit ERC-1 du fabricant Emotiva
Aller à la page of 22
.
.
TABLE OF CONTENTS Thank You for your ERC-1 Purchase 5 Limited Warranty 6 Service Assistance For the ERC-1 6 Emotiva Disclosure 7 FCC Compliance 7 Safety Precautions 8 A Note for the Cable Television (.
TROUBLESHOOTING 20 The disc does not rotate 20 The disc is playing but there is no sound 20 The disc stops, noise is heard or the sound drops out 20 A CD-R / CD-RW disc cannot be played 20 The remote .
THANK YOU FOR YOUR ERC-1 PURCHASE Dear Music Enthusiast, Thank you for purchasing the Emotiva ERC-1 CD Play er. We sincerely believe that it offers you outstanding performance and value. Emotiva pr oducts are engineered and produced with the highest quality materials and incorporate the la test technology.
LIMITED WARRANTY The Emotiva ERC-1 CD Player has been created to perform flawlessly for many years. As a result of this quality and crafts manship, Emotiva offers the follo wing warranty to owners of the ERC-1.
Emotiva Disclosure Copyright 2009 Emotiva All Rights Reserved. Emotiva reserves the right to make improvements to its products at any time. Therefore, the specificat ions of the product and the specif ic details of this manual are subject to change at any time.
SAFETY PRECAUTIONS Read this User's Guide thoroughly before attemp ting to install and c onfigure the ERC-1 CD Player. All the safety and oper ation instructions should be read before any operation of the component(s) begin.
A Note for the Cable Tel evision (CATV) Installer This reminder is to call the CATV system installe r's attention to Article 82040 of the NEC that provides guidelines for proper grounding and in .
TECHNICAL SPECIFICATIONS • Output voltage: 1V rms (7V peak) • Channel separation: ≥ 95dB - ref. 1kHz • Frequency response: 20Hz~20kHz (+/- 0.1dB) • S/N: ≥ 100dB (A weighted ） • THD: ≤ 0.
KEY ERC-1 FEATURES Four (4) independent power supplies to drive each section of the unit separately. This prevents the different sections from interacting and causi ng noise. The separate power supplies apply to: 1. CD carriage 2. Digital section 3. Analog section 4.
DISC HANDLING Use only discs with regular shapes. If an irregular disc (a disc wit h a special shape) is used the ERC-1 may be damaged. Discs usable with the ERC-1 CD Audio (CD-DA), CD-R, CD-RW, HDCD Holding discs Avoid touching the surface of a di sc where recording is performed.
FRONT PANEL LAYOUT 1. PLAY/PAUSE This is used to play and pause the disc. 2. PREVIOUS This is used to jump to the st art of the current trac k or to jump to the start of the previous track. 3. NEXT This is used to advance to t he start of the next track.
REAR PANEL LAYOUT 1. BALANCED OUTPUTS (1 set) These are used to connect the ERC-1 to a si ngle input device (pre/pro, receiver) with balanced (XLR) type cables. 2. ANALOG OUTPUTS (2 sets) These are used to connect the ERC-1 to two separate input devices, (pre/pro, receiver) with RCA type cables.
REMOTE CONTROL . EJECT isc from the unit. sed to dim the displa y light. It also turns off th e it between On and Standby mode. y and Pause the disc. d to jump to the st art of the current track or to sed to search backward and has three different ed to search fo rward and has three different ed to advance to the start of the next track.
11. A-B This allows you to loop a certai n section of a track, a full track, multiple tracks etc. Press once to start the loop, press again where you want the loop to end. The player will now play the section between the two loop points. Press the A-B button again an d the ERC-1 returns to normal play.
CHANGING THE REMOTE CONTROL BATTERIES Emotiva recommends using high quality AAA batte ries in the ERC-1 remote control. To change the remote control batteries y ou will need a small Philips head screwdriver. Remove the six (6) Philips head screws on the back of the remote.
OPERATING INSTRUCTIONS LOADING & EJECTING DISCS 1. Press the Standby/On button, make sure unit is on. 2. The display will read EMOTIVA for a few se conds at power up. LOADING will then appear on the screen. The play er will then say READY. Insert disc into the slot-loader gently.
LOCATING A PARTICULAR POINT IN A TRACK 1. Make sure that the disc is playing the desired track. 2. Press the Left REV Button on the remote cont rol, the CD will then rewind within the track. Press again and the disc will rewi nd faster. Press a third time and the disc rewinds faster.
TROUBLESHOOTING • The disc does not rotate 1. Is the power cable plugged in? 2. Is the power switch on? 3. Is the disc placed upside down? 4. Is the disc dirty? 5. Is the disc scratched? 6. Is the disc warped? • The disc is playing but there is no sound 1.
21 Revised 06/2009 All contents © 2009 Emotiv a Audio Corporatio n..
22 .
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Emotiva ERC-1 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Emotiva ERC-1 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Emotiva ERC-1, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Emotiva ERC-1 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Emotiva ERC-1, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Emotiva ERC-1.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Emotiva ERC-1. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Emotiva ERC-1 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
