
Ruby
Your Ruby stove at a single glance 31 Installation 31 Lighting the stove 31 How the air valve works 32 Lighting the stove for the first time 32 Fuel 33 Wood species and storage 33 The best way to burn your stove 33 Chimney and flue 34 Maintenance 34 Small maintenance 34 When the stove is not used 34 Yearly maintenance 34 Safety 35 Guarantee 35 General instructions 36 Preparation 36 The chimney flue 36 Fire Safety 36 Installation 37 Supply of combustion air 37 External air connection 37 Connecting the stove 37 Hanging version: 37 Standing version (on base OND.RU.0320): 38 Installation of channel casing for hanging version (optional OND.RU.0310) 38 Installation of channel casing for standing version (optional OND.RU.0310) 39 Repairs 39 Replacing glass 39 Replacing interior combustion chamber 39 Technical details 40 Technical drawings 56 Exploded view 59
© Copyright 2015 Wanders fires & stoves The information contained herein is subject to change without notice. Wanders fires & stoves shall not be liable for technical or editorial errors or omissions contained herein.

Congratulations on your new wood-burning stove, which will be a comfortable source of heat to enjoy for many years on end.
When designing this fireplace we took particular care regarding the ease of use, the operational safety and the design. The stove is developed and produced at our own factory in Netterden (the Netherlands) and is for the greater part handmade. Only the best materials are used for the construction and comply with current international standards. This will guarantee that your woodstove has a long life.
The first part of this user’s guide gives you tips and directions about how to use your wood-burning stove correctly and safely. The second part of the manual contains the installation instructions and the technical specifications of the stove. They are of particular importance to the installer.
We advise you to read this manual thoroughly before using your new stove and to keep the manual in a handy place. Your installer may need the manual for the yearly maintenance of your fireplace.
We wish you much warmth with your new fireplace!
Dear Client, · The WANDERS team





The Ruby is a combination of comfort and effi cient heat emission. The large glass panes allow emission of the heat from the stove directly to the environment to make your room instantly comfortable. The built-in fl ue gas defl ector ensures circulation of fl ue gases in the interior parts. Combined with the extra after-burning, it means that the fl ue gases have better combustion and reduce the burden on the environment. You can regulate the intake of combustion air with the integrated air slide valve and adjust the intensity of the fi re and the output of your stove.
It is common practice for the dealer where you purchased your Ruby stove to also take care of installing it. If this is not the case, please ensure that the installation is done by a certifi ed installer. A certifi ed installer can also give you the right advice about the fl ue tube to which the stove must be connected. Connecting wood-burning stoves by unqualifi ed persons is prohibited, in which case we cannot give any guarantee about proper functioning of your Ruby stove. Please bear the fi re safety in mind when installing the stove. See also page 36.
The wood-burning stove is suitable as an extra heat source and does not replace your principal heating device, such as your central heating system.
Lighting your stove early in autumn or late in winter When the external and internal temperatures do not diff er much, a proper chimney draught is a challenge. Early in autumn or late in winter you can help chimney draught get started by burning some wood while keeping all air inlets maximally open. An abundant air supply speeds up quick heating which in turn increases the draught in the chimney. Lighting up the stove with only a little wood prevents smoke from streaming into the room.
The stove will become very hot when you light it and will need at least two hours to cool off . Don’t touch the stove without protection during fi ring and for two hours after. Handle the stove always with a glove to avoid getting serious burns.

Before lighting the fi re, you must clean away any deposits on the window pane with a paper from a kitchen roll. The same paper can be used for lighting the fi re. Open the combustion air inlet (A). Open the slide to its maximum before lighting the stove. Then open the door and put some balls of paper or fi relighters in the stove and place some wood kindling on top. Light the kindling and leave the stove door ajar (for 3 to 5 minutes) for

extra air supply and enhancing chimney draught. Once the kindling has caught fi re you can add extra wood. (Put the logs loosely on the fi re so that the fl ames can catch on all around).
How the air valve works The air slider has three settings, i.e. 1. entirely extended, primary, secondary and tertiary air supply will open. 2. press until fi rst click, only secondary and tertiary air supply will open, the stove will now have the highest effi ciency and the window pane rinser will work best 3. press until second click, everything closes and stove will slowly shut down.



It is prohibited to light the stove with liquids like petrol or spirits. Do not have the cooker hood on in the room where you operate your stove. Never touch the varnished parts when you heat your stove.
Avoid fi nger marks Do not touch the glass of the stove with your fi ngers. Finger marks will burn into the glass and cannot be removed later.
Discolouration of walls, ceilings and grates The walls, ceilings and grates may show some discolouration after lighting your stove. This is caused by the dust particles that burn in the convection cover. WANDERS cannot be held responsible for this natural process. To minimize discolouring we refer to the advice given for atmospheric hearths. Your installer can give you more information about this.
When you light the Ruby for the fi rst time, the hearth must still ‘anneal’ and temper itself. The unit has a heat resistant lacquer which must burn in the stove at temperatures above 400 °Celsius. This will happen during the fi rst few times of lighting the stove and temperatures rise to 600 °C. Though this may give an unpleasant smell, it is otherwise harmless. It is advisable to keep the stove burning with limited fuel for at least 6 hours when lighting the stove for the fi rst 4 or 5 times. Air the room well when the stove is burning. Make sure that any cooking hood is not turned on when the stove is burning; a cooking hood extracts the combustion air that the stove needs.
Some deposit may form on the glass panes of the stove when you ‘anneal’ your hearth. You can easily remove this deposit with a damp cloth after the stove has cooled down. You can also use some cleansing agent for ceramic rings. Please make sure you do not leave any fi nger marks on the clean glass. Finger marks burn into the glass and cannot be removed later.
Newly built house or recently renovated? It is advisable to wait six weeks before lighting the stove in a newly built house that has recently been completed, or in a space that has recently been renovated drastically. The walls and ceilings still contain gases, softeners and moisture from plasterwork or paint. The warm air-streams may discolour the dust particles in the space, which may stick to walls and ceilings. Even the moisture in the walls and ceilings will become warm and may cause yellow stains.

Fir, Poplar 1 year
Lime, Willow, Spruce, Birch, Ash, Alder 1,5 years
Fruit trees, Beech 2 years
The Ruby only burns on wood. Do not put more than 1,5-2 kg of fuel in the stove at the time. Always use clean and cut logs, which have sufficiently dried. Please see the above list for drying times. Wet wood does not burn well and gives heavy smoke emission. It may blacken the glass pane of your stove with soot and build up smut in the flue pipe. This may increase the risk of chimney fire.
Fresh, moist wood contains about 50% moisture. Cleaved wood still contains 20% moisture after drying it for a year and moisture percentage will be decreased to 12 to 15% after drying it for two years. Dry wood gives nice flames and little or no smoke, and the fire will crackle when burning. Wet wood makes a hissing sound, gives much smoke and only small flames which will considerably dampen the pleasure of burning your stove and the heat output.
Wood species and storage You can use all kinds of woods as fuel as long as it is clean, split and dry. Hardwood like Ruby, beech and birch burn slowly, give off much heat and form charcoal easily. Softer woods like spruce, fir and poplar give more flames but less heat and less charcoal. The best place to store timber is in a windy spot but sheltered from the rain. This is how the logs can dry in a natural way. Pile the logs on an old pallet or a frame to let the wood dry from underneath and to prevent the lower logs from being in contact with water.
Do not put any paraffin-containing logs in your stove. When the door is closed, the high heat will melt the paraffin from the logs too quickly. The polluted flue gasses which consequently develop will deposit on and burn in the glass of your stove and cannot be removed later.
Do not use any wood that is painted, impregnated, glued together or processed in any other way. The flue gases are very harmful to the environment and may affect your stove. It is also prohibited to burn plastics and other waste matter due to poisonous smoke development.
Wood Drying time · Ruby 2,5 years

The chimney is the most important part of your wood-burning hearth. When the chimney is right it will not distribute any smoke into your room, leave any deposit on the glass pane or create bad combustion. Before starting the installation of the stove, your installer or a qualified chimney sweep must check whether the chimney flue has a diameter of at least 150 millimetres over the entire length, and whether the channel is clean, smooth and leak-proof.
Chimney with proper draught Warm air wants to ascend. This is the principle of every chimney. It helps when the wind near the chimney mouth draws the air from the chimney. Fall wind may give the opposite effect and blow the air back into the chimney. Relatively cold foggy air may thwart proper draught in your chimney, as does a long flue pipe with a rough inside and many bends. If the natural draught in your chimney is poor, your installer can give you information about using a ventilator for your flue tube.
What to do in case of chimney fire In case of chimney fire, immediately close the shut-off valve in the flue and all air supply ducts. Call the fire department. After the fire is extinguished, the chimney and the stove must be inspected again by your installer.
Do not use any aggressive cleaning agents or abrasives to maintain your stove.

A WANDERS wood-burning stove gives you a comfortable and a safe source of heat in your home.
Fire safety starts with a proper installation and a properly working flue tube. Your installer must therefore comply with the installation instructions as listed on page 37 and further. To burn your stove safely, the following points are important: 1. Burn your stove as much as possible with a closed door; it increases the output and is better for the environment. 2. Prevent small children or the infirm from getting too close to a burning stove and do not leave them alone in the room when the stove is burning. You could use a fire-screen. 3. Do not pour or put combustible liquids and materials in the stove, as it may damage the fireplace beyond repair. 4. If the floor around the fireplace is made of combustible material you must use a floor slab. The floor slab must have a minimum size of: - 50 cm measured from the fireplace on the front side of the door: - 30 cm measured from the fireplace on all sides from the door:. 5. Do not place any combustible materials, such as curtains, wooden objects (cupboards, paintings) close to the fireplace or the flue tube. A minimum distance of 80 cm measured from the exterior of the stove and the flue tube is required. 6. Never cover the chimney breast or mantelpiece with combustible material (e.g. paper covering). 7. Please bear in mind the points of the section on ‘the best way to burn your stove’, on page 33. 8. Have your stove repaired only by a certified installer and with original parts.
WANDERS Metaalproducten B.V. in Netterden, the Netherlands, gives a guarantee of five years after the purchase date of your wood-burning stove, provided that the fireplace is properly installed and used in accordance with the instructions in the manual. The guarantee includes all defects which can be reduced to flaws in material and construction, in which case you will receive the new parts free of charge. Labour costs or other expenses are not covered by the guarantee. You can send defect parts (shipping paid) to WANDERS Metaalproducten B.V., Amtweg 4, 7077 AL in Netterden [The Netherlands]. Before installing your stove you must check if there is any visible damage to the unit. If there is, do not accept the unit and contact your supplier.
The guarantee does not include: the glass, failure due to improper use; non-compliance with the national regulations and enclosed installation and operating instructions; installation by an installer of dealer who is not acknowledged by WANDERS, negligence of the unit and change of owner. The guarantee is also disclaimed when a wrong fuel is used.
There is a guarantee period of one year for all cast iron and vermiculite parts, and the lacquer.
WANDERS disclaims responsibility for any cracks in stuccoed walls or discolouration of walls, ceilings and/or grates after burning the fireplace. Discolouration can be caused when dust particles burn in the convection cover. To minimize the chance of cracks in stucco and discolouration we refer to the advice given for decorative hearths. Your installer can give you more information.
Ruby side panels and feet can be manufactured products consisting of various materials further refined and colored subsequently. Wanders do not guarantee any differences in tones and shades of coloring and cannot be held accountable, if there are any.
Any complaints will be dealt with after the sales firm, the installer has filed a complaint and sent a copy of the purchase receipt with purchase date. Any repairs do not entitle you to extend the guarantee term. All consequential damages or loss are excluded.

The Ruby is tested in accordance with the international EN 13240 standardization, and has an extra additional standardization for optimally environment-friendly heating devices related to flue gases. The stove can be connected to a flue tube to which several stoves are connected. The flue tube has a diameter of 150 millimetres.
The heating device must be placed by an acknowledged installer and according to the installation instructions given below. The national and local rules and regulations for placing and using wood-burning stoves are equally applicable. WANDERS does not give any guarantee if the Ruby is connected or installed incompletely or incorrectly.
X > 23˚
X < 23˚
Fire Safety
For reasons of fire safety is it important to observe the instructions below before installing the stove.
1. If the floor around the stove is made of combustible material, you must use a floor slab. The floor slab must measure at least: - 50 cm from the stove on the front side of the door - 30 cm from the stove on the sides of the door. 2. Keep at least a distance of 100 cm between the stove and combustible objects such as curtains, wooden objects (cupboards and paintings) and glass objects. Keep the same distance from the flue tube. 3. Wooden construction parts within the radiation range of the stove (80 cm from the exterior of the stove) must be covered with fireproof material. 4. If the flue tube goes through a ceiling and/or roof that consist of flammable materials, the ceiling and the roof
500 mm

must be covered with fi reproof materials all around (about 80 cm). Pay also attention to joisted fl oor layers and any electric wiring. 5. Keep a distance of at least 50 cm (in all directions) between the stove and supporting steel construction parts. 6. Shield off all combustible materials within a radius of 100 cm from the stove openings with non-combustible materials. 7. Never cover the chimney breast with combustible material (e.g. paper covering). 8. The wall behind the stove must consist of, or be insulated with, fi re-proof materials. The insulation material must resist a temperature of 700 °C and have a density of 80 kg/m3. Please see for insulation materials table page 41).
The Ruby is tested in accordance with the international EN 13240 standardization, and has an extra additional standardization for optimally environment-friendly heating devices related to fl ue gases. The stove can be connected to a fl ue tube to which several stoves are connected. The fl ue tube has a diameter of 150 mm.
External air connection The fresh air supply channel has a diameter of 100 millimetres. The air supply channel can be fi tted via a bottom or rear connection. If the optional base is used, the connections can be fi tted through the base. For the hanging version, the optional connection cabinet OND.2004 must be installed under the stove. If the external air supply goes through a fi rewall, that channel must be able to be shut off . If the channel is longer than 1 meter, including a bend of 90 degrees, the channel’s diameter will need to be increased. Sizes for both situations can be found on page 58.
Connecting the stove The Ruby is a heavy wood stove. Depending on the version, the Ruby weighs at least 130 kilos, including the 2-meter long smoke-gas discharge. Make sure the wall or fl oor that you are installing the stove on can easily carry this weight. Before installing the stove, follow the directions in the previous chapter ‘Preparation’. Protect your back and the fl oor during installation.
Hanging version: 1. Check the packaging, and report any visible damages. 2. There are 3 diff erent boxes for installation (1x the stove + 1x the side panels + 1x the glass plate) 3. Take the stove out of the box (mind your back), 4. Take the wall bracket (sizes on page 58) for the stove out and mount it to the wall,







Standing version (on base OND.RU.0320): 1. Check the packaging, and report any visible damages. 2. There are 4 diff erent boxes for installation (1x the stove + 1x the side panels + 1x the glass plate + 1x the base) 3. Take the stove out of the box (mind your back) 4. Take the wall bracket for the stove out and put it away, you won’t be needing it. 5. Carefully place the stove on its back. 6. Take the base out of the box. 7. Install the base under the stove with six M6 bolts.









Installation of channel casing for hanging version (optional OND.RU.0310) 1. Place the stove and base as described on page 38. 2. Make sure the stove is standing or hanging directly under the chimney. 3. Install the spacing strip (A) to the wall and make sure the strip is supported by the wall bracket. 4. Hang the channel casing (B) in the spacing strip (A) 5. Install the chimney. 6. Install the sliding element (C) and attach it to the ceiling with 4 screws. 7. Hang the face plate (D) in the casing.




Installation of channel casing for standing version (optional OND.RU.0310) 1. Place the stove and base as described on page 38. 2. Make sure the stove is standing or hanging directly under the chimney. 3. Connect the spacer (E) to the stove with 2 bolts (M5 recessed head) 4. Remove the spacing strip (A), this only needs to be used for the hanging version. 5. Place the channel casing (B) on to the holder and attach it to the wall with 4 screws. 6. Install the chimney. 7. Install the sliding element (C) and attach it to the ceiling with 4 screws. 8. Hang the face plate (D) in the casing.

Replacing glass 1. Open the door 2. Remove the 6 screws on the inside of the door 3. Remove the 2 glass holders 4. Carefully take the glass out of the door 5. Check to see whether the strap in the door is not damaged and that it is connected. If not, secure the strap with heat-resistant sealant or replace it entirely. 6. Put in the new glass, beware of sharp edges on the glass 7. Put the various parts back in place
Replacing interior combustion chamber Remove panels from stove in the following order: 1. You can choose to leave the baffl e plate (A) in its place, but we advise you to remove it in order to prevent damage













* the nominal heat is obtained with a chimney draft of 0,12 mBar


Flue gas values in accordance with DIN 4705, DIN 18895 part 2 With closed door and using only wood as fuel.

Table for insulation material. Only use products in the shaded area
Insulation Packed Thermal conduction Maximum Density appliance temp.
nr article nr form nr packed nr C nr kg/m³
10 11 12 13
mineral wool glass wool rock wool waste prod.
bands loose wool wool granule felt lamella mat
stitched mats stitched mats stitched mats g. curve 2
10 12 14 16
100 120 140 160
02 03 04 05 06 07 08 09 10 11 12 13
20 30 40 50 60 70 80 90 100 110 120 130
flakes g. curve 1 flakes g. curve 2
06 07 08 09 10
stitched mats plates scales segments interwoven
plates g. curve 1 plates g. curve 2 single
Select the insulation material from this table. Group 99 is NOT allowed.
Les utilisateurs et notre équipe répondent généralement sous 24 h — et votre question servira aussi aux suivants.
Soyez le premier à poser une question — d'autres utilisateurs ou notre équipe y répondront.