FR
Progress logo
Notice d'utilisation officielle

Progress PAS8065E

60 pages·1.5 MB·Cuisinière·PDF·ENITJA
Progress PAS8065E
Table des matières 45 sections CONTENTS · SAFETY INFORMATION · Children and vulnerable people safety · General Safety · … AfficherMasquer
Page 2 of the Progress PAS8065E user manual — Electrical Connection
Page 2 · cliquer pour agrandir
Page 2
  • Do not operate the appliance by means of an external timer or separate remote-control system.
  • Unattended cooking on a hob with fat or oil can be dangerous and may result in fire.
  • Never try to extinguish a fire with water, but switch off the appliance and then cover flame e.g. with a lid or a fire blanket.
  • Do not store items on the cooking surfaces.
  • Metallic objects such as knives, forks, spoons and lids should not be placed on the hob surface since they can get hot.
  • Do not use a steam cleaner to clean the appliance.
  • If the glass ceramic surface / glass surface is cracked, switch off the appliance to avoid the possibility of electric shock.
  • If the supply cord is damaged, it must be replaced by the manufacturer, an authorized Service or similarly qualified persons in order to avoid a hazard.

SAFETY INSTRUCTIONS

Installation

  • If the appliance is installed above drawers make sure that the space, between the bottom of the appliance and the upper drawer, is sufficient for air circulation.
  • The bottom of the appliance can get hot. Make sure to install a non-combustile separation panel under the appliance to prevent access to the bottom.
  • Remove all the packaging.
  • Do not install or use a damaged appliance.
  • Obey the installation instruction supplied with the appliance.
  • Keep the minimum distance from the other appliances and units.
  • Always be careful when you move the appliance because it is heavy. Always wear safety gloves.
  • Seal the cut surfaces with a sealant to prevent moisture to cause swelling.
  • Protect the bottom of the appliance from steam and moisture.
  • Do not install the appliance adjacent to a door or under a window. This prevents hot cookware to fall from the appliance when the door or the window is opened.

Electrical Connection

  • All electrical connections should be made by a qualified electrician.
  • The appliance must be earthed.
  • Before carrying out any operation make sure that the appliance is disconnected from the power supply.
  • Make sure that the electrical information on the rating plate agrees with the
Page 3 of the Progress PAS8065E user manual — Use
Page 3 · cliquer pour agrandir
Page 3
  • power supply. If not, contact an electrician.
  • Make sure the appliance is installed correctly. Loose and incorrect electricity mains cable or plug (if applicable) can make the terminal become too hot.
  • Use the correct electricity mains cable.
  • Do not let the electricity mains cable tangle.
  • Make sure that a shock protection is installed.
  • Use the strain relief clamp on the cable.
  • Make sure the mains cable or plug (if applicable) does not touch the hot appliance or hot cookware, when you connect the appliance to the near sockets
  • Do not use multi-plug adapters and extension cables.
  • Make sure not to cause damage to the mains plug (if applicable) or to the mains cable. Contact our Authorised Service Centre or an electrician to change a damaged mains cable.
  • The shock protection of live and insulated parts must be fastened in such a way that it cannot be removed without tools.
  • Connect the mains plug to the mains socket only at the end of the installation. Make sure that there is access to the mains plug after the installation.
  • If the mains socket is loose, do not connect the mains plug.
  • Do not pull the mains cable to disconnect the appliance. Always pull the mains plug.
  • Use only correct isolation devices: line protecting cut-outs, fuses (screw type fuses removed from the holder), earth leakage trips and contactors.
  • The electrical installation must have an isolation device which lets you disconnect the appliance from the mains at all poles. The isolation device must have a contact opening width of minimum 3 mm.

Use

  • Remove all the packaging, labelling and protective film (if applicable) before first use.
  • Use this appliance in a household environment.
  • Do not change the specification of this appliance.
  • Make sure that the ventilation openings are not blocked.
  • Do not let the appliance stay unattended during operation.
  • Set the cooking zone to “off” after each use.
  • Do not put cutlery or saucepan lids on the cooking zones. They can become hot.
  • Do not operate the appliance with wet hands or when it has contact with water.
  • Do not use the appliance as a work surface or as a storage surface.
  • If the surface of the appliance is cracked, disconnect immediately the appliance from the power supply. This to prevent an electrical shock.
  • When you place food into hot oil, it may splash.
  • Fats and oil when heated can release flammable vapours. Keep flames or heated objects away from fats and oils when you cook with them.
  • The vapours that very hot oil releases can cause spontaneous combustion.
  • Used oil, that can contain food remnants, can cause fire at a lower temperature than oil used for the first time.
  • Do not put flammable products or items that are wet with flammable products in, near or on the appliance.
  • Do not keep hot cookware on the control panel.
Page 4 of the Progress PAS8065E user manual — Cooking surface layout
Page 4 · cliquer pour agrandir
Page 4
  • Do not let cookware to boil dry.
  • Be careful not to let objects or cookware fall on the appliance. The surface can be damaged.
  • Do not activate the cooking zones with empty cookware or without cookware.
  • Do not put aluminium foil on the appliance.
  • Cookware made of cast iron, aluminium or with a damaged bottom can cause scratches on the glass / glass ceramic. Always lift these objects up when you have to move them on the cooking surface.
  • This appliance is for cooking purposes only. It must not be used for other purposes, for example room heating.
  • Do not use water spray and steam to clean the appliance.
  • Clean the appliance with a moist soft cloth. Only use neutral detergents. Do not use abrasive products, abrasive cleaning pads, solvents or metal objects.

Disposal

  • Contact your municipal authority for information on how to discard the appliance correctly.
  • Disconnect the appliance from the mains supply.
  • Cut off the mains cable and discard it.

Care and cleaning

Service

  • Clean regularly the appliance to prevent the deterioration of the surface material.
  • Deactivate the appliance and let it cool down before you clean it.
  • Disconnect the appliance from the electrical supply before maintenance.
  • To repair the appliance contact an Authorised Service Centre.
  • Use original spare parts only.

PRODUCT DESCRIPTION

Cooking surface layout

1 Cooking zone 2 Control panel

Page 5 of the Progress PAS8065E user manual — Heat setting displays
Page 5 · cliquer pour agrandir
Page 5

Control panel layout

Progress PAS8065E — Control panel layout diagram (page 5)
Fig. 1 · Control panel layout

Use the sensor fields to operate the appliance. The displays, indicators and sounds tell which functions operate.

Progress PAS8065E — Control panel layout diagram (page 5)
Fig. 2 · Control panel layout

1 ON / OFF To activate and deactivate the hob.

3. To activate and deactivate the outer ring.
4. Heat setting display To show the heat setting.

To show for which zone you set the time.

6. Timer display To show the time in minutes.
7. To activate and deactivate the outer ring.

9 / - To increase or decrease the time.

Heat setting displays

The cooking zone is deactivated.

Display Description

Page 6 of the Progress PAS8065E user manual — Activating and deactivating the outer rings
Page 6 · cliquer pour agrandir
Page 6

- The cooking zone operates.

Automatic Heat Up function operates.

+ digit There is a malfunction.

A cooking zone is still hot (residual heat).

Lock / The Child Safety Device function operates.

Automatic Switch Off function operates.

Residual heat indicator

DAILY USE

Heat setting The hob deacti- vates after

Activating and deactivating

, 1 - 2 6 hours

Touch for 1 second to activate or deactivate the hob.

3. 4 5 hours

Automatic Switch Off

6. 9 1.5 hour

The function deactivates the hob automatically if:

The heat setting

  • all cooking zones are deactivated,
  • you do not set the heat setting after you activate the hob,
  • you spill something or put something on the control panel for more than 10 seconds (a pan, a cloth, etc.). An acoustic signal sounds and the hob deactivates. Remove the object or clean the control panel.
  • you do not deactivate a cooking zone or change the heat setting. After some time

Touch to increase the heat setting. Touch to decrease the heat setting. Touch and at the same time to deactivate the cooking zone.

Activating and deactivating the outer rings

You can adjust the surface you cook to the dimension of the cookware.

comes on and the hob deactivates. The relation between the heat setting and the time after which the hob deactivates:

Use sensor field:

To activate the outer ring: touch the sensor field. The indicator comes on.

To deactivate the outer ring: touch the sensor field until the indicator goes out.

Display Description · 5 4 hours

Page 7 of the Progress PAS8065E user manual — The Child Safety Device
Page 7 · cliquer pour agrandir
Page 7

Automatic Heat Up

Minute Minder You can use this function as a Minute Minder when the hob is activated and the cooking zones do not operate (the heat setting display shows ).

If you activate this function you can get a necessary heat setting in a shorter time. The function sets the highest heat setting for some time and then decreases to the correct heat setting.

To activate the function: touch . Touch or of the timer to set the time. When the time comes to an end, the sound operates and 00 flashes.

To activate the function the cooking zone must be cold.

To activate the function for a cooking zone: touch until the correct heat setting comes on. After 3 seconds comes on.

To stop the sound: touch .

The function has no effect on the operation of the cooking zones.

To deactivate the function: touch .

Timer

Lock

You can lock the control panel while cooking zones operate. It prevents an accidental change of the heat setting.

Count Down Timer You can use this function to set how long the cooking zone should operate for a single cooking session.

Set the heat setting first.

First set the cooking zone then set the function. You can set the heat setting before or after you set the function.

To activate the function: touch . comes on for 4 seconds. The Timer stays on.

To set the cooking zone: touch again and again until the indicator of a necessary cooking zone comes on.

To deactivate the function: touch . The previous heat setting comes on.

To activate the function or change the time: touch or of the timer to set the time (00 - 99 minutes). When the indicator of the cooking zone starts to flash slowly the time counts down.

When you deactivate the hob, you also deactivate this function.

The Child Safety Device

This function prevents an accidental operation of the hob.

To see the remaining time: set the cooking zone with . The indicator of the cooking zone starts to flash quickly. The display shows the remaining time.

To activate the function: activate the hob with . Do not set the heat setting. Touch for 4 seconds. comes on. Deactivate the hob with .

To deactivate the function: set the cooking zone with and touch . The remaining time counts back to 00. The indicator of the cooking zone goes out.

To deactivate the function: activate the hob with . Do not set the heat setting. Touch for 4 seconds. comes on. Deactivate the hob with .

When the time comes to an end, the sound operates and 00 flashes. The cooking zone deactivates.

To override the function for only one cooking time: activate the hob with . comes on. Touch for 4 seconds. Set

To stop the sound: touch .

Page 8 of the Progress PAS8065E user manual — Cookware
Page 8 · cliquer pour agrandir
Page 8

the heat setting in 10 seconds. You can operate the hob. When you deactivate the hob with the function operates again.

HINTS AND TIPS

Examples of cooking applications

The data in the table is for guidance only.

Cookware

The bottom of the cookware must be as thick and flat as possible.

Cookware made of enamelled steel and with aluminium or copper bottoms can cause the colour change on the glass- ceramic surface.

Heat setting Use toTime (min)

- 1 Keep cooked food warm. as neces- sary

Put a lid on the cookware.

1. 2 Hollandaise sauce, melt: butter, chocolate, gelatine.
5. 25 Mix from time to time.
1. 2 Solidify: fluffy omelettes, baked eggs.
10. 40 Cook with a lid on.
2. 3 Simmer rice and milkbased dishes, heating up readycooked meals.
25. 50 Add the minimum twice as much liquid as rice, mix milk dishes part procedure through.
3. 4 Steam vegetables, fish, meat. 20 - 45 Add some tablespoons of liquid.
4. 5 Steam potatoes. 20 - 60 Use max. ¼ l water for 750 g of potatoes.
4. 5 Cook larger quantities of food, stews and soups.
60. 150 Up to 3 l liquid plus ingredients.
6. 7 Gentle fry: escalope, veal cordon bleu, cutlets, rissoles, sausages, liver, roux, eggs, pancakes, doughnuts.

Turn halfway through.

as neces- sary

Page 9 of the Progress PAS8065E user manual — TROUBLESHOOTING
Page 9 · cliquer pour agrandir
Page 9
Heat setting Use toTime (min)
7. 8 Heavy fry, hash browns, loin steaks, steaks.
5. 15 Turn halfway through.

9 Boil water, cook pasta, sear meat (goulash, pot roast), deep-fry chips.

CARE AND CLEANING

the dirt can cause damage to the hob. Put the special scraper on the glass surface at an acute angle and move the blade on the surface. • Remove when the hob is sufficiently cool: limescale rings, water rings, fat stains, shiny metallic discoloration. Clean the hob with a moist cloth and some detergent. After cleaning, rub the hob dry with a soft cloth.

General information

  • Clean the hob after each use.
  • Always use cookware with clean bottom.
  • Scratches or dark stains on the surface have no effect on how the hob operates.
  • Use a special cleaner applicable for the surface of the hob.
  • Use a special scraper for the glass.

Cleaning the hob

  • Remove immediately: melted plastic, plastic foil, and food with sugar. If not,

TROUBLESHOOTING

What to do if...

Problem Possible cause Remedy

You cannot activate or oper- ate the hob.

The hob is not connected to an electrical supply or it is connected incorrectly.

Check if the hob is correctly connected to the electrical supply. Refer to the connec- tion diagram.

The fuse is released. Make sure that the fuse is the cause of the malfunction. If the fuse releases again and again, contact a qualified electrician.

Activate the hob again and set the heat setting in less than 10 seconds.

Page 10 of the Progress PAS8065E user manual — CARE AND CLEANING
Page 10 · cliquer pour agrandir
Page 10

Problem Possible cause Remedy

You touched 2 or more sen- sor fields at the same time.

Touch only one sensor field.

There is water or fat stains on the control panel.

Clean the control panel.

An acoustic signal sounds and the hob deactivates. An acoustic signal sounds when the hob is deactivated.

You put something on one or more sensor fields.

Remove the object from the sensor fields.

The hob deactivates. You put something on the

Remove the object from the sensor field.

sensor field .

Residual heat indicator does not come on.

The zone is not hot because it operated only for a short time.

If the zone operated suffi- ciently long to be hot, speak to an Authorised Service Centre.

Automatic Heat Up function does not operate.

The zone is hot. Let the zone become suffi- ciently cool.

The highest heat setting is set.

The highest heat setting has the same power as the func- tion.

You decreased the heat set-

Start from and only in- crease the heat setting.

ting to .

You cannot activate the outer ring.

Activate the inner ring first.

It is normal that there is a dark area on the multiple zone.

There is a dark area on the multiple zone.

The sensor fields become hot.

The cookware is too large or you put it too near to the controls.

Put large cookware on the rear zones if possible.

comes on. Automatic Switch Off oper- ates.

Deactivate the hob and acti- vate it again.

comes on. The Child Safety Device or the Lock function operates.

Refer to "Daily use" chapter.

Page 11 of the Progress PAS8065E user manual — Built-in hobs
Page 11 · cliquer pour agrandir
Page 11

Problem Possible cause Remedy

and a number come on. There is an error in the hob. Disconnect the hob from the electrical supply for some time. Disconnect the fuse from the electrical system of the house. Connect it again.

If comes on again, speak to an Authorised Service Centre.

If you cannot find a solution...

message that comes on. Make sure, you operated the hob correctly. If not the servicing by a service technician or dealer will not be free of charge, also during the warranty period. The instructions about the Service Centre and conditions of guarantee are in the guarantee booklet.

If you cannot find a solution to the problem yourself, contact your dealer or an Authorised Service Centre. Give the data from the rating plate. Give also three digit letter code for the glass ceramic (it is in the corner of the glass surface) and an error

INSTALLATION

and work surfaces that align to the standards.

Connection cable

Before the installation

  • The hob is supplied with a connection cable.
  • To replace the damaged mains cable use the following (or higher) mains cable type: H05BB-F Tmax 90°C. Speak to your local Service Centre.

Before you install the hob, write down the information bellow from the rating plate. The rating plate is on the bottom of the hob.

Serial number

Built-in hobs

Only use the built-in hobs after you assemble the hob into correct built-in units

Page 12 of the Progress PAS8065E user manual — Cooking zones specification
Page 12 · cliquer pour agrandir
Page 12

Assembly

Progress PAS8065E — Assembly diagram (page 12)
Fig. 3 · Assembly
Progress PAS8065E — Assembly diagram (page 12)
Fig. 4 · Assembly

TECHNICAL INFORMATION

Rating plate

Modell PAS8065E PNC 949 594 324 00 Typ 55 HBD 47 AO 220 - 240 V 50 - 60 Hz Made in Germany Ser.Nr 7.0 kW PROGRESS

Cooking zones specification

Cooking zone Nominal Power (Max heat set-

ting) [W] Cooking zone diameter [mm]

Left front 750 / 2200 120 / 210

Page 13 of the Progress PAS8065E user manual — Energy saving
Page 13 · cliquer pour agrandir
Page 13

Cooking zone Nominal Power (Max heat set-

ting) [W] Cooking zone diameter [mm]

Left rear 1200 145

Right front 1200 145

Right rear 1500 / 2400 170 / 265

For optimal cooking results use cookware not larger than the diameter of the cooking zone.

ENERGY EFFICIENCY

Product information according to EU 66/2014

Type of hob Built-In Hob

Number of cooking zones 4

Heating technology Radiant Heater

Diameter of circular cooking zones (Ø)

Left front Left rear Right front

21.0 cm 14.5 cm 14.5 cm

Lenght (L) and width (W) of non circular cooking zone

Right rear L 17.0 cm W 26.5 cm

Energy consumption per cooking zone (EC electric cooking)

Left front Left rear Right front Right rear

174.5 Wh / kg 202.3 Wh / kg 202.3 Wh / kg 185.4 Wh / kg

Energy consumption of the hob (EC electric hob)

191.1 Wh / kg

EN 60350-2 - Household electric cooking appliances - Part 2: Hobs - Methods for measuring performance

  • Before you activate the cooking zone put the cookware on it.
  • The cookware bottom should have the same diameter as the cooking zone.
  • Put the smaller cookware on the smaller cooking zones.
  • Put the cookware directly in the centre of the cooking zone.
  • Use the residual heat to keep the food warm or to melt it.

Energy saving

You can save energy during everyday cooking if you follow below hints.

  • When you heat up water, use only the amount you need.
  • If it is possible, always put the lids on the cookware.

Model identification PAS8065E

Page 14 of the Progress PAS8065E user manual — ENVIRONMENT CONCERNS
Page 14 · cliquer pour agrandir
Page 14

ENVIRONMENT CONCERNS

dispose appliances marked with the symbol

Recycle the materials with the symbol . Put the packaging in applicable containers to recycle it. Help protect the environment and human health and to recycle waste of electrical and electronic appliances. Do not

with the household waste. Return the product to your local recycling facility or contact your municipal office.

Dépannage

Dépannage

Problèmes fréquents, causes probables et solutions.

ProblèmeCause possibleSolution
You cannot activate or oper- ate the hob.The hob is not connected to an electrical supply or it is connected incorrectly.Check if the hob is correctly connected to the electrical supply. Refer to the connec- tion diagram. p.9
You cannot activate or oper- ate the hob.The fuse is released.Make sure that the fuse is the cause of the malfunction. If the fuse releases again and again, contact a qualified electrician. p.9
You cannot activate or oper- ate the hob.Activate the hob again and set the heat setting in less than 10 seconds. p.9
You touched 2 or more sen- sor fields at the same time.Touch only one sensor field. p.10
There is water or fat stains on the control panel.Clean the control panel. p.10
An acoustic signal sounds and the hob deactivates. An acoustic signal sounds when the hob is deactivated.You put something on one or more sensor fields.Remove the object from the sensor fields. p.10
The hob deactivates.You put something on the sensor field .Remove the object from the sensor field. p.10
Residual heat indicator does not come on.The zone is not hot because it operated only for a short time.If the zone operated suffi- ciently long to be hot, speak to an Authorised Service Centre. p.10
Automatic Heat Up function does not operate.The zone is hot.Let the zone become suffi- ciently cool. p.10
Automatic Heat Up function does not operate.The highest heat setting is set.The highest heat setting has the same power as the func- tion. p.10
Automatic Heat Up function does not operate.You decreased the heat set- ting to .Start from and only in- crease the heat setting. p.10
You cannot activate the outer ring.Activate the inner ring first. p.10
There is a dark area on the multiple zone.It is normal that there is a dark area on the multiple zone. p.10
The sensor fields become hot.The cookware is too large or you put it too near to the controls.Put large cookware on the rear zones if possible. p.10
comes on.Automatic Switch Off oper- ates.Deactivate the hob and acti- vate it again. p.10
comes on.The Child Safety Device or the Lock function operates.Refer to "Daily use" chapter. p.10
and a number come on.There is an error in the hob.Disconnect the hob from the electrical supply for some time. Disconnect the fuse from the electrical system of the house. Connect it again. If comes on again, speak to an Authorised Service Centre. p.11

Poser une question sur : Progress PAS8065E

Les utilisateurs et notre équipe répondent généralement sous 24 h — et votre question servira aussi aux suivants.

Add your email to get notified when it’s answered — no spam, ever.

0 questions
Aucune question pour l'instant sur le Progress PAS8065E

Soyez le premier à poser une question — d'autres utilisateurs ou notre équipe y répondront.

Document d'origine

Progress PAS8065E manuel PDF

60 pages·1.5 MB·Cuisinière·PDF
Cliquez sur une page ci-dessus pour l'ouvrir ici
Page 1 / …
100%
Chargement des pages…