Manuel d'utilisation / d'entretien du produit Bass Effects Processor du fabricant Yamaha
Aller à la page of 35
.
2 1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product.
3 WARNING- When using any electrical or electronic prod- uct, basic precautions should always be followed. These precau- tions include, but are not limited to, the following: 1.
4.
5 Thank you for pur chasing the Y amaha MAGICST OMP BASS . T o get the most out of this pr oduct, we ur ge you to thor oughly r ead this manual befor e use. Also, please keep the manual in a safe place for futur e r efer ence. Owner’ s Manual Contents Precautions .
6 Package Contents The follo wing items are included in the MAGICST OMP package. Check to see that you ha ve ev er y- thing listed here. Precautions •A v oid using the MAGICST OMP in the following locations to pre vent possible damage: • In direct sunlight or next to heating equipment.
7 MAGICSTOMP BASS ’ Main Features [Prof essional quality preset tone patches make the MA GICST OMP ready to use out of the bo x] • Close collaboration between artists from around the world and our audio engineers has pro- duced a variety of prof essional quality patches.
8 Component Names & Functions ■ T op P anel ■ Rear P anel When monitoring through a pair of headphones, make sure you properl y adjust the volume so as not to damage y our hearing.
9 Component Names & Functions q Display Displays inf ormation for the currently selected patch or operating conditions of the MA GICSTOMP . w CONTROL Knobs These are used to control patch parameters. ( → page 14) e V OLUME Knob Controls the ov erall output volume of the MA GICSTOMP .
10 Connections CAUTION • In order to pre vent electric shock or damage to your equipment, turn OFF the power on the bass amp, etc., and set the MA GICSTOMP’ s volume to its minimum level bef ore making any connections. • Use ONL Y a Y amaha AC-10 P ower Adaptor (or other adaptor specificall y recommended by Y amaha).
11 INPUT AC IN L/MONO INPUT (or POWER AMP INPUT) OUTPUT L/MONO R R L/MONO INPUT INPUT INPUT INPUT R L/MONO U99¤MAGICSTOMP ó‡GAINfiMSTRáTONE Bass Guitar , or other instrument Po wer Adaptor Connecting to an amplifier , etc. (monaural) MA GICST OMP Connecting to a mixer (stereo) Connecting to a recording de vice , etc.
12 ■ T ry out some of the other patches The MAGICST OMP has a total of 198 patches. 99 of those are User Patches (U01 – U99) to which you can sa ve (ov erwrite) data of patches that you hav e created. The other 99 are Preset P atches (P01 – P99) which can not be ov erwritten with new data.
13 The other wa y to select patches is with the [Perf ormance Mode] . In this mode, the – , +, and ON/OFF s witches are used to select one of three adjacent patches. q T o enter the Perf ormance Mode , press and hold any two s witches (from –, +, and ON/OFF).
14 When the knob ’ s position does not match the value f or the selected parameter , you ’ ll need to rotate the knob until it matches the position that corresponds to the parameter value before you can change the setting. Let ’ s rotate the DRIV knob.
15 Create your own sound OK, now try and edit a patch to your liking. * F or more information on par ameters of individual effects, r efer to the se parate “Ef fect List” sheet.
16 Create your own sound e Use the +/– switc hes to select the parameter setting display . P arameters for the currently selected patch are arranged on se ver al pages. Use the “ + ” or “–” s witches to view the next or pre vious page on the display .
17 ● Assigning parameters to the unit’ s control knobs P arameters that are controlled by the unit ’ s control knobs during nor mal operation are as- signed to the control knobs in the upper por tion of the parameter page displa y (shown below: the page bef ore 01/?? ).
18 P01⁄Studio ó‡CRATfiGAINáMSTR U01:Studio PRESS[STORE]1sec U01:Studio PRESS[STORE]1sec U01¤Studio NOW 0 STORING... Store complete! Press and hold Saving Patches Destination patch number for s.
19 U11:Studio PRESS[STORE]1sec Saving Patches The name of the edited patch P01⁄Studio ó‡CRATfiGAINáMSTR U01:Studio PRESS[STORE]1sec Destination patch number for storing The name of the edited patch U11:Studio PRESS[STORE]1sec U11¤Studio NOW 0 STORING.
20 _ U01¤Studio NAME EDIT MODE U01:Studio PRESS[STORE]1sec Press and hold P01⁄Studio ó‡CRATfiGAINáMSTR U01:Studio PRESS[STORE]1sec Current patch number Cursor Giving the patch a name _ U01¤Ttudio NAME EDIT MODE Cursor A to Z (space) a to z (space) 0 to 9 : ! " # $ % & ' ( ) * + ,- .
21 Giving the patch a name U01:TUBE 0 DRIVE1 PRESS[STORE]1sec U01:TUBE 0 DRIVE1 NOW 0 STORING... Changing the patch name is complete. Press and hold U01¤TUBE 0 DRIVE1 ó‡CRATfiGAINáMSTR Up to 12 characters can be used in a patch name . * Only 11 c haracters ar e displayed when the USB connection is used.
22 The MA GICSTOMP is equipped with a highly sophisticated A uto F eedback Reduction function (AFR) to eliminate f eedback (howling). * In this case, “F eedback” is when a specific fr equency produced by the amplif ier causes the bass to resonate uncontr ollably , creating a howling sound.
23 Auto Feedback Reduction (AFR) Function U88«Acoustic 00 CAN'T 0 DETECT ■ Using the AFR Function After you ha ve s witched ON (activated) the AFR function us- ing the procedure described on t.
24 In T une! TUNE 0 PITCH:440Hz E 0 : 00000 >|< Raise Pitch Lower Pitch TUNE 0 PITCH:440Hz 00 : 000000 | 000000 Standard Pitch Note Name 00000 >| | 00 < | 0 < | 000 < |< 000 > 00 | 00 > 000 | 0000 > 0 | T uner Mode This mode is used f or tuning your bass.
25 00 FACTORY 00 SET 00 0 NO:[-] 0 YES:[+] 00 FACTORY 00 SET 00 SURE?PUSH[STORE] ■ Restoring the factory defaults Hold down both the ON/OFF s witch and [STORE/EXIT] b utton then plug in the power adaptor con- nected to the unit, and “ F ACT OR Y SET ” will appear in the displa y .
26 Editing Patches with a Computer In the CD-R OM that came with your MAGICST OMP you ’ ll find some patch files ( library file f ormat ) that contain patches other than those found in the MA GICST OMP ’ s Preset P atches (P01-P99).
27 USB-MIDI Driver(+OMS*) * OMS is requir ed for Macintosh computers only . Computer Supplied CD-ROM MA GICSTOMP Sound Editor for MA GICSTOMP (Application) USB Cable Patc h Data Patc h Data File U99¤.
28 Editing Patches with a Computer For W indows Users ● Contents of the CD-ROM Folder Name Application Name Contents ACR OREAD Enables y ou to view each application ’ s PDF file. USBdr v_ Y AMAHA USB MIDI driver (f or Win98/Me) Driver needed when connecting the MA GICSTOMP to the computer with a USB cable.
29 Editing Patches with a Computer ● Installing Acrobat Reader PDF files (***E.pdf) for the Sound Editor f or MAGICST OMP Owner ’ s Manual and installation guides for the accompan ying application or drivers, plus the MA GICSTOMP Eff ect List are all found in the accompanying CD-ROM → “ Manual ” folder .
30 For Macintosh Users ● Contents of the CD-R OM ( “ International ” folder) * T he “Japanese” folder contains the J a panese version of the softwar e. Editing Patches with a Computer Folder Name Application Name Contents ACR OREAD Enables y ou to view each application ’ s PDF file.
31 ● Installing Acrobat Reader PDF files (***E.pdf) for the Sound Editor f or MAGICST OMP Owner ’ s Manual and installation guides for the accompan ying application or drivers, plus the MA GICSTOMP Eff ect List are all found in the accompanying CD-R OM → “ Inter national ” f older → “ Man ual ” f older.
32 Error Messages T rouble Shooting One of the f ollowing messages may appear in the MA GICST OMP ’ s displa y if an error occurs during operation. If so, please stop operation and check the following points to find a solution to the problem. The data being b ulk tr ansmitted is damaged.
33 Specifications Digital Section • Digital signal processing eff ector • Includes special editor application “Sound Editor f or MAGICST OMP” • Patch Select: 2 Modes • Built-in Chromatic A.
34 SOFTW ARE LICENSING A GREEMENT The follo wing is a legal agreement between y ou, the end user, and Y amaha Cor poration ( “ Y amaha ” ). The enclosed Y amaha software prog ram is licensed by Y amaha to the original purchaser for use only on the terms set forth herein.
WD98950.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Yamaha Bass Effects Processor c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Yamaha Bass Effects Processor - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Yamaha Bass Effects Processor, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Yamaha Bass Effects Processor va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Yamaha Bass Effects Processor, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Yamaha Bass Effects Processor.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Yamaha Bass Effects Processor. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Yamaha Bass Effects Processor ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
