Manuel d'utilisation / d'entretien du produit X014 du fabricant Vivitar
Aller à la page of 56
ViviCam X014 Digital Camera User Manual © 20 10 Sakar Inter national, Inc. All righ ts reserv ed. Windows and the Windows logo ar e registered trade marks of Micros oft Corpor ation. All other trade marks are the property of their re spective comp anies.
1 Content s Introduction .................................................................................................................................. 2 W hat‟ s Inclu ded ........................................................................
2 Introduction Thank you for purchasing this camera. Every thing you need to take quality digital photos and videos is included with your camera. Vivitar makes capturing those special moments as easy as possible. Note: Your camera needs an SD Memory card (up to 32GB) for normal use.
3 Parts of the Camera 1. Power Button 12. ViviLink / Down Button 2. Shutter Button 13. Microphone 3. LCD Screen 14. Flash Light 4. LED 15. USB Slot 5. Zoom Out 16. Tripod Socket 6. Zoom In 17. Digital Lens 7. MODE Button 18. Battery Compartment 8. SET Button 19.
4 Initial Camera Set up Installing the Batteries Installing the Memory Card Turning On the Camera Using the Camera Selecting the modes Accessing the menu SD Memory card (up to 32GB) needed for nor.
5 W hen p owering the camera ON for the first time the camera will take you through the initial camera setup. Powering the Came ra ON 1) Make sure the batteries have been inserted properly into your digital camera. Use 3 x AAA (1.5v) batteries. Rechargeable batteries are not recommended for use.
6 Setting the ViviLink Default Option Once the Date and Time have been set, you w ill be asked to set the default ViviLink destination for photos and videos taken with your camera.
7 Main Camera Modes Your camera has different modes for the various camera functions. You can switch modes by pressing the MODE button on your camera after the camera has been powered ON. Ph oto Capture Mode Use this mode to capture pictures with your camera.
8 Camera Techn ical Specificatio ns Image Sensor CMOS Sensor Image Resolution 10M (3648x2736), 8M (3264x2448), 7M HD (3648x2048), 5M (2592x1944), 3M (2048x1536), 2M HD (1920x1080), VGA ( 640x480 ) Vid.
9 Computer Sy stem Requirem ents – Windo ws To be able to download photos and videos to y our PC, you will need the following minimum configuration: Pentium 4 processor or above w ith W indow s .
10 Using Your D igital Camer a Make sure the batteries have been inserted properly into your digital camera. If y our camera comes with a rechargeable lithium battery, make sure it is fully charged before the first use. Powering the came ra ON Press the Power button to turn your camera ON.
11 To change the active camera mode, make sure the camera is pow ered ON and press the MODE button on the back of the camera. W hen in Photo Captu re Mode, this icon will display on the top -left corn.
12 Photo Cap ture Mode The Photo Capture mode allows you to capture pict ures with y our digital camera. T aking a Picture 1) W hile in Photo Capture mode, use the LCD display on the back of the camera to direct t he camera at the scene you would like to capture.
13 Photo Capture M ode Quick Functi on Buttons Your digital camera has a four-directional pad that function s as Quic k Function buttons: Button Icon appearing and A ction Lef t Scene Selection - Open.
14 conditions. Note: An initial flash appears to test your lighting conditions. If flash is needed, a second flash will appear upon taking the photo. Forced On The flash is enabled for each photo. Note: If you use this option in a well lit envir onment, your photo may be appear too bright/light (ov erexposed).
15 Photo Capture M ode Menus The following are the menus that appear in your camera‟s Photo Ca pture Mode:.
16 Scene Menu The Sc ene Menu allows y ou to choose scene se ttings that allow your camera t o a dapt pro perly to your current environment. 1) Press the SET button to open the menus for the current mode. 2) Press the LEFT or RIGHT direction control buttons to scroll and select the chosen menu.
17 Image Qualit y Menu The Image Quality menu allows you to select the desired q uality le vel of the images taken b y your camera. Keep in mind that images with a higher image qualit y level w ill also take up more memory on your camera. 1) Press the SET button to open the menus for the current mode.
18 9) Remember that this setting will be saved by your camera until you manually change th e setting or restore the camera‟s default factory settings. Anti-Shake Menu The Anti-Shake featur e reduces image distortion that can be c aused by movement of the camera while capturing the image.
19 Facing the camera - The face of the subject(s) you are photographing must be facing the camera and must hold the pose for at least 4 t o 5 seconds until the green square(s) appears around the subject`s face. Face Detect will not work with a side shot of the subject`s head.
20 Once a smile is detected the camera will automatically take the picture. Smile Capture will not work with a side shot of the subject`s head. 1) Press the SET button to open the menus for the current mode. 2) Press the LEFT or RIGHT direction control buttons to scroll and select the chosen menu.
21 Co lor Effect Menu You can choose to add a color effect to the images taken with y our camera. 1) Press the SET button to open the menus for the current mode. 2) Press the LEFT or RIGHT direction control buttons to scroll and select the chosen menu.
22 Image Sharpness M enu You can set the level of sharpness in the imag es taken with your camera . The sharpness level dictates if the edges of objects in the image are more or less distinct. 1) Press the SET button to open the menus for the current mode.
23 9) Remember that this setting will be saved by your camera until you manually change the setting or restore the camera‟s default factory setting s. ISO Menu The ISO menu allows you to set the level of sensitivity that your camera has to light in the surrounding environment.
24 Multi – Used in standard conditions the c amera div ides and adjusts the se ttings of the image into several zones for light metering such as complex lig ht conditions, position of subj e ct, bri.
25 Date/Time Menu W hen y ou capture an image with your camera, the image will include a time stamp with the date and time that the image was taken. The Date/Time menu allows you to set your camera‟s date and time as desired. You can also disable the timestamp for future images that will be taken with your camera.
26 Silen t Mode M enu You have the option of activating the camera‟s Silen t mode to disable all of the so und effects (except for during the Self-Timer countdown) that the camera emits when performing camera functions. 1) Press the SET button to open the menus for the current mode.
27 Frequenc y Menu The options in the Frequency menu represent the frequency of the electrical current in fluorescent lighting sources in your locale. If your camera is set to a frequency that does not match your country‟s electric current, you may see waves on the images taken by your camera.
28 8) The memory card will be completely formatted. 9) A message will appear confirming that your memory card has been formatted clean. Firmware M enu Use this menu to view the Firmware version on your camera or to reset your camera setting s to the Factory Default Settings.
29 Photo Play back Mode W hen y ou first turn on the camera, the camera wil l be in Photo Ca pture mode by default . Press the MODE button twice to open the Playback Mod e. The playback mode will all ow you to review and edit photos and videos that you‟ve already taken with you camera.
30 Photo Pla yback Mode Quick Func tion Buttons Your digital camera has a four-directional pad that functions as Quick Function buttons. Button A ction Lef t Displays the PREVIOUS ima ge Up Views all .
31 6) To delete all the images (including all unlocked photos and videos) on your camera‟s memory card, select “Delete All Images”. 7) Press the SET button to select the desired op tion. 8) You will be asked to confirm your selection. 9) The photos will be deleted as desired.
32 Rot ate Menu Use this menu to rotate the picture s that you‟ve taken with your camera. 1) Press the SET button to open the menus for the current mode. 2) Press the LEFT or RIGHT direction control buttons to scroll and select the chosen menu. 3) Press the UP or DOWN direction control buttons to scroll through the menu options.
33 Protect/Lock M enu Pictures and Videos taken with your camera can be protected or “locked” to prevent any deletion or alteration being made to the files. 1) Press the SET bu tton to open the menus for the current mode. 2) Press the LEFT or RIGHT direction control buttons to scroll and select the chosen menu.
34 Slide Show Menu You can view a slideshow of all the pictures taken with your camera by pressing the “Up” Quick Function button while in Playback mode. The Slideshow menu allow s you to set the interval length of time that each picture will display during the slideshow.
35 Video Capture Mode The Video Capture Mode allows you to capture videos w ith your digital camera. W hen the camera is first powered ON, the camera will be in Photo Capture Mode.
36 Video Capture Mode Menus The following are the menus that appear in your camera‟s Video Ca pture Mode:.
37 Scene Menu The Sc ene Menu allows y ou to choose sce ne settings that allow your camera to adapt properly to your current environment. 1) Press the SET button to open the menus for the current mode. 2) Press the LEFT or RIGHT direction control buttons to scroll and select the chosen menu.
38 Image Qualit y Menu The Image Quality menu allows you to select the desired q uality le vel of the images taken b y your camera. Keep in mind that images with a higher image quality level will also take up more memory on your camera. 1) Press the SET button to open the menus for the current mode.
39 White Balance M enu The White Balance feature allows your camera to adjust the coloring o f the captured images depending on the type of light source in the current environment.
40 Image Sharpness M enu You can set the level of sharpness in the imag es taken with your camera. The sharpness level dictates if the edges of objects in the image are more or less distinct. 1) Press the SET button to open the menus for the current mode.
41 7) Press the MODE button to exit the menu and return to your previous mode. 8) An icon reflecting your selection will display on the LCD screen. 9) Remember that this setting will be saved by your camera until you manually change the setting or restore the camera‟s default factory settings.
42 Multi – Used in standard conditions the c amera div ides and adj usts the settings of the image int o several zones for light metering such as complex lig ht conditions, position of subject, brig.
43 Date/Time Menu W hen y ou capture an image with your camera, the image will include a time stamp with the date and time that the image was taken. The Date/Time menu allows you to set yo ur came ra‟s date and time as desired. You can also disable the timestamp for future images that will be taken with your camera.
44 W hen t he camera sits idle for the designated period o f time, the cam era will shut off completely and will need to be turned on again w ith the power button before the next use. 1) Press the SET button to open the menus for the current mode. 2) Press the LEFT or RIGHT direction control buttons to scroll and select the chosen menu.
45 Format Memor y Card Menu You can use the Format Memory Card menu to delete all of the content that is currently on your camera‟s memory card. Keep in mind that formatting the memory card w ill permanently delete al l of the content on your camera ’s memory card .
46 Video Play back M ode W hen y ou first turn on the camera, the camera wil l be in Photo Capture mode by default . Press the MODE button twice to open the Playback Mod e. The Playback Mode will allow y ou to review a nd edit photos and videos that you‟v e already taken with you camera.
47 Video Playback Mode Menus The following are the menus that app ear in your camera‟s Video Playback Mode: Delete Menu W hile in the Playback mode, you can delete videos from your camera through the delete menu. 1) View the image you would like to delete.
48 7) An icon will appear on the image with the selected ViviLink destinatio n site. 8) Remember that the ViviLink feature is deactiv ated by default. A ViviLink de stinati on will only be assigned to.
49 Installing the Soft ware You must be connected to the internet to install and run the Vivitar Experience Image Manager – Walmart Edition software. 1) Insert the installation CD into your CD-ROM drive. The installation screen should automatically open.
50 Note: If you do not have internet access, you can still download media from the camera. Click the “How to transfer photos and videos from my camera to my computer” button for instructions. 5) If you have internet access, s elect your camera model from the list and click “Nex t” to open the next window.
51 Getting Photos and Videos from your Camera to Your C omputer An SD card needs to be inserted. Do not disconnect the cable during transfer. Doing so will cancel the transfer of any files on their w ay to your computer. 1) Select the “Get Images” button from the Main menu.
52 Get started! Using the Vivitar Experience Image Manager – Walmart Edition, you can: Upload an d manage photos and videos to an d from the m ost popular photo s haring and social networking si.
53 Transfer media f rom my camera to my computer manually (Using Macintosh) 1) Use the USB cable that came with your camera to connect your camera to your c omputer. 2) MSDC appears on the LCD. 3) The camera‟s device icon appears on the desktop. 4) Click on the device icon and open the DCIM folder and the folder inside to view the media files.
54 Sakar Warranty C ard This warranty covers for the original consumer purchaser only and is not transferable. Products that fail to function properly UNDER NORMAL USAGE, due to defects in mate rial or workmanship w ill be repaired at no c harge f or parts or labor for a per iod o f one year from the time of purchase.
55 Technical Sup port For technical support issues please v isit our w ebsite at www .viv itar.com . You can find manuals, software and FAQ‟s at the website. Can‟t find w hat you are looking fo r? E -mail us at support@vivitar.com and one of our technical support team members w ill answer your questions.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Vivitar X014 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Vivitar X014 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Vivitar X014, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Vivitar X014 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Vivitar X014, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Vivitar X014.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Vivitar X014. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Vivitar X014 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
