Manuel d'utilisation / d'entretien du produit Tornado du fabricant Turbo Chef Technologies
Aller à la page of 48
Accelerating the World of Cooking TM Tornado TM Owner’s Manual FOR THE TURBOCHEF TORNADO SPEED COOK OVEN 800.90TURBO / +1 214-379-6000 Part Number: NGC-1006 / Revision D / April 2007.
.
MODEL SERIAL NUMBER INSTALLED BY INSTALLATION CHECKED BY SERVICE CENTER NAME / NUMBER For service or information: WITHIN NORTH AMERICA CALL Customer Service at 800.
IMPORTANT SAFETY INFORMATION - PLEASE READ FIRST WARNING: Improper installation, adjustment, alteration, service or maintenance can cause property damage, injury or death. Read the installation, operating and maintenance instructions thoroughly before installing or servicing this equipment.
Important Safety Instructions i To Reduce the Risk of Fire in the Oven Cavity ii Precautions to Avoid Possible Exposure to Excessive Microwave Energy ii Grounding Instructions ii Power Supply Cord Rep.
Loading a Menu from a Smart Card 9 Saving a Menu to a Smart Card 9 Common Operating Terms Oven Operating Components 11 Modes and States 11 Common Cooking Terms 11 Faults and Errors 12 Operating the To.
Maintenance and Troubleshooting Daily Maintenance for the Tornado 25 Tips for Prolonging Oven Life 26 Troubleshooting 26 Catalytic Converter 29 Limited Warranty North America Limited Warranty 30 Inter.
i INTRODUCTION IMPORTANT SAFETY INSTRUCTIONS To reduce the risk of burns, electric shock, fire, injury, or exposure to excessive microwave energy, strictly adhere to the following basic safety precautions when using this appliance. Read all instructions before using the appliance.
ii INTRODUCTION TO REDUCE THE RISK OF FIRE IN THE OVEN CAVITY Remove wire twist-ties from paper or plastic bags to be placed in the oven. If materials inside the oven should ignite, keep the oven door closed and turn the oven off. Disconnect the power cord or shut off power at the fuse or circuit breaker panel.
iii INTRODUCTION POWER SUPPLY CORD REPLACEMENT If the power supply cord is damaged, it must be replaced by the manufacturer, its service agent or a similarly qualified person in order to avoid a hazard. WARNING: Improper grounding can result in a risk of electric shock.
1 OVERVIEW OF THE TORNADO OVEN Overview of the Tornado Oven FIGURE 1 : Dimensions of the Tornado Oven SPECS AND DIMENSIONS Dimensions EXTERIOR Height 19” (482 mm) with legs* 23” (584 mm) Width 26” (660 mm) Depth 25.7” (653 mm) with handle 28.2” (716 mm) Weight 190 lbs.
2 OVERVIEW OF THE TORNADO OVEN Accessories (Additional Charge) 24” (610 mm) stainless steel oven stand with locking casters 18” (457 mm) stainless steel oven stand with locking casters Certifications Packaging All ovens are packaged in a double-wall corrugated box with integrated corrugated skids.
3 HOW THE TECHNOLOGY WORKS FIGURE 2 : How the Technology Works THE TECHNOLOGY BEHIND THE TORNADO The Tornado uses a patented combination of high speed forced air convection, heating, and microwave energy to cook food up to 12 times faster than conventional methods.
4 INSTALLATION INSTRUCTIONS The TurboChef Tornado is manufactured to comply with applicable CE, NSF, UL, cUL, TÜV, PSE, GOST R, FDA, and FCC requirements. All equipment is designed and certified for safe opera- tion when installed in accordance with local and/or national codes.
FIGURE 3 : Oven Secured to Cart FIGURE 4 : Double Stacking Ovens There must be at least 6” (150 mm) between the top of the unit and any shelf or surface. The oven must be installed level front to back and side to side. For additional stability, the oven legs may be bolted to the countertop if desired.
6 ASSEMBLY AND INSTALLATION 5. Remove the legs of the oven that will be placed on top. This requires two or more persons—at least one person to lift and one person to unscrew the legs. 6. Remove the screws from the oven that will be placed on top, as marked with black arrows in Figure 4.
OPTIONAL INSTALLATION ITEMS Oven Restraint Kit (P/N TC3-0242) The Oven Restraint Kit is an optional system intended to hinder the oven from moving forward during use and/or cleaning. It will not prevent the oven from falling off a countertop if the legs are allowed to slide off the edge or if the oven is inten- tionally or forcefully pulled off.
8 ASSEMBLY AND INSTALLATION FIGURE 7 : 24” (610mm) Cart with a Single Oven FIGURE 8 : 24” (610mm) Cart with a Single Oven Oven Carts (P/N TC3-0143-1 & P/N TC3-0143-2) There are two carts – 18” (457 mm) (TC3-0143-2) and 24” (610 mm) (TC3-0143-1) – available for use with the Tornado oven.
LOADING A MENU FROM A SMART CARD At some point you may be required to overwrite the existing menu settings with new ones via a smart card. Please note that once the procedure below is completed, the old menu settings will be perma- nently lost . 1. Ensure the oven is in the OVEN OFF / COOLING DOWN mode.
10 ASSEMBLY AND INSTALLATION This page left intentionally blank..
Common Operating Terms OVEN OPERATING COMPONENTS Display The display is the primary interface to relay mes- sages to the operator. Keypad The keypad is the primary interface for the opera- tor to enter commands to the oven. Cook Cavity Cavity in which the food products are cooked.
12 COMMON OPERATING TERMS Total Cook Time The total duration (time) of a recipe. IR Set Temperature The operating temperature of the IR heating ele- ment during a given recipe.
13 OPERATING THE TORNADO OVEN THE CONTROL PAD Reference Figure 10. 1. Display Displays operation and editing information. 2. Soft Keys Eight keys adjacent to the display. Press a soft key to select an option on the screen adjacent to the key. 3. Arrow Keys Press to navigate between screens, or within screen if editing a recipe.
POWERING UP THE OVEN Initial Power-Up When power is initially applied, the “Initialization” Screen will display the firmware version and the oven’s serial number for five (5) seconds (Figure 11) before advancing to the OFF screen. The OFF screen displays “Oven Off” in large text (Figure 12).
COOKING INSTRUCTIONS From the IDLE screen, the user can select a food group and item to cook: NOTE : Press the BACK key at any time to return to the previous screen. 1. Place the food item into the oven. WARNING: Inside of oven is HOT! Insert food with caution.
7. If the DONE screen is enabled, the user has the option to cook the item more or save an altered cook time (the cook time would have been altered only from the ENTER COOK TIME screen). See Figure 20. If “Cook More” is selected, close the oven door and choose one of the following options: a.
EDITING A FOOD ITEM Changing the Edit Pin Number By default, the EDIT PIN number is “9.” For instructions on changing the EDIT PIN number, contact Customer Service at 800.90 TURBO or +1 214-379-6000. Editing a Food Item 1. From the COOLING DOWN or OFF mode, simultaneously press the UP and DOWN keys.
b. Insert food item into cook cavity. WARNING: Inside of oven is HOT! Insert food with caution. c. Close the oven door and press the bottom-left soft key to test the new settings. d. Follow steps 5-8 in the section titled COOKING INSTRUCTIONS , pages 15-16.
The “Done” Screen Enable the DONE screen to provide the option to: - Cook an item longer after the completion of a cook cycle. - Save a changed cook time (only if the ENTER COOK TIME screen is also enabled). See page 16. To enable/disable the DONE screen: 1.
This page left intentionally blank. 20 OPERATING THE TORNADO OVEN.
21 RECIPE DEVELOPMENT AND COOKING TIPS Recipe Development and Cooking Tips DEVELOPING RECIPES TurboChef ovens use a combination of hot air and microwave energy to cook food.
22 Finish: Little to no microwave is used. The air is moderate to high to finish the caramelization of the product, and achieve the desired color. A recipe might look like this: Example 2: French Fries & Frozen Puff Dough Items Just like with a frozen pizza, these two items will have to be defrosted, cooked and then finished.
23 RECIPE DEVELOPMENT AND COOKING TIPS Don’t be Afraid to Experiment In developing recipes, don’t be afraid to experiment. Write down current settings and then start testing variations. Old recipes can always be re-programmed into the oven in a matter of seconds.
24 Plastics CPET and PCTA CPET and PCTA plastic containers may be used, but are dangerous. If there is no alternative to CPET or PCTA, then the application must be carefully structured and controlled. Although PCTA has a melting temperature approximately 50ºF (25ºC) higher than CPET, both products perform similarly.
25 MAINTENANCE AND TROUBLESHOOTING DAILY MAINTENANCE FOR THE TORNADO When cleaning the oven, u se only TurboChef Oven Cleaner. Any other cleaning products can damage critical parts, resulting in a non-warranty service call.
26 TIPS FOR PROLONGING OVEN LIFE DO: Ensure the oven is cleaned daily. Use only TurboChef Oven Cleaner. Remove items from the oven as soon as they are cooked. Use only microwave-safe TurboChef-approved cooking accessories in the oven. Review cooking instructions to ensure oven settings are correct for corresponding products.
27 Table 1: Error Codes/Faults, Possible Causes and Suggested Remedies The following is a list of fault codes and error messages, along with the possible problem(s) that the oven may be experiencing. Please attempt the recommended action before calling Customer Service.
ISSUE POSSIBLE CAUSE(S) RESOLUTION F1: Blower Running Status Bad Oven power interrupted. Verify wall circuit breaker is on. Reset breaker and then power the oven back on. Place the oven into Off State for two (2) minutes, disconnect the plug for minimum of two (2) minutes, re-plug in the oven and and press the OVEN ON soft key.
ISSUE POSSIBLE CAUSE(S) RESOLUTION F6 EC Temp Blockage of cool air into the oven. Rear cooling fan exhaust guard is clogged. Check for paper towels or anything that may be obstructing cool air into the oven. Check rear fan to see if it is free of debris.
30 North America Limited Warranty TURBOCHEF “TORNADO” HIGH SPEED TOASTING OVEN – NORTH AMERICA The TurboChef speed cook oven Limited Warranty outlined below is activated upon shipment of your oven. Should you require additional assistance after reviewing the warranty outlined below, please call TurboChef Customer Service at 800.
31 NORTH AMERICA LIMITED WARRANTY Accessories: Accessories and parts (collectively “Accessories”) that are consumed in the normal course of Equipment operation or maintenance are excluded from this warranty.
32 DISCLAIMER OF DAMAGES TurboChef disclaims all incidental, special and consequential damages, including but not limited to loss of use, lost revenue or profits, or substitute use, suffered by you or.
33 INTERNATIONAL LIMITED WARRANTY International Limited Warranty This Limited Warranty shall apply to the sales of all TurboChef “Tornado” Series ovens (the “Equipment”) manufactured by TurboChef Technologies, Inc.
34 INTERNATIONAL LIMITED WARRANTY 3. You make the Equipment available to TurboChef, the Authorized Distributor or its authorized service agents; 4. The Equipment has been installed by an Authorized Di.
35 INTERNATIONAL LIMITED WARRANTY tal, special or consequential damages, including but not limited to loss of use, lost revenue or profits, or substitute use suffered by You or any third party, whethe.
This page left intentionally blank..
.
For service or information: WITHIN NORTH AMERICA CALL Customer Service at 800.90 TURBO or Sales & Marketing at 866.90 TURBO OUTSIDE NORTH AMERICA CALL +1 214-379-6000 or Your Authorized Distributo.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Turbo Chef Technologies Tornado c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Turbo Chef Technologies Tornado - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Turbo Chef Technologies Tornado, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Turbo Chef Technologies Tornado va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Turbo Chef Technologies Tornado, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Turbo Chef Technologies Tornado.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Turbo Chef Technologies Tornado. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Turbo Chef Technologies Tornado ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
