Manuel d'utilisation / d'entretien du produit R9001330 du fabricant Barco
Aller à la page of 131
OWNER'S MANUAL GRAPHICS 8200 R9001330 Art. No. :R5975288 Date: 110497 BARCO PROJECTION SYSTEMS OWNER'S MANUAL GRAPHICS 8200 R9001330 Art. No.
Due to constant research, the information in this manual is subject to change without notice. Produced by BARCO NV, April 1997. All rights reserved. Trademarks are the rights of their respective owners. Printed in Belgium Due to constant research, the information in this manual is subject to change without notice.
Table of Contents 5975288 BARCOGRAPHICS 8200 110497 i-1 Table of Contents 5975288 BARCOGRAPHICS 8200 110497 i-1 WARNINGS & SAFETY INSTRUCTIONS ........................................................................................................
Table of Contents i-2 5975288 BARCOGRAPHICS 8200 110497 Table of Contents i-2 5975288 BARCOGRAPHICS 8200 110497 RGB analog input module. ....................................................................................................... ..........
Table of Contents 5975288 BARCOGRAPHICS 8200 110497 i-3 Table of Contents 5975288 BARCOGRAPHICS 8200 110497 i-3 Gamma .....................................................................................................................................
Table of Contents i-4 5975288 BARCOGRAPHICS 8200 110497 Table of Contents i-4 5975288 BARCOGRAPHICS 8200 110497 Hardwired RCU. ............................................................................................................................
Safety Instructions 5975288 BARCOGRAPHICS 8200 110497 1-1 Safety Instructions 5975288 BARCOGRAPHICS 8200 110497 1-1 WARNINGS AVERTISSEMENTS Safety instructions Prescriptions de securite On safety Secu.
Prescription de sécurtié 1-2 5975288 BARCOGRAPHICS 8200 110497 Presciptions de sécurité 1-2 5975288 BARCOGRAPHICS 8200 110497 Remarque sur la Sécurité Les projecteurs sont fabriqués conformément aux exigences des normes de sécurité internationales IEC950, UL 1950 et CSA C22.
Safety Instructions 5975288 BARCOGRAPHICS 8200 110497 1-3 Safety Instructions 5975288 BARCOGRAPHICS 8200 110497 1-3 Notice on safety Projectors are built in accordance with the requirements of the international safety standards IEC950, UL 1950 and CSA C22.
Prescription de sécurtié 1-4 5975288 BARCOGRAPHICS 8200 110497 Presciptions de sécurité 1-4 5975288 BARCOGRAPHICS 8200 110497 RISQUE D'ELECTRO- CUTION NE PAS OUVRIR ATTENTION ATTENTION : AFIN.
Safety Instructions 5975288 BARCOGRAPHICS 8200 110497 1-5 Safety Instructions 5975288 BARCOGRAPHICS 8200 110497 1-5 The lightning flash with an arrowhead within a triangle is intended to tell the user that parts inside this product are risk of electrical shock to persons.
Prescription de sécurtié 1-6 5975288 BARCOGRAPHICS 8200 110497 Presciptions de sécurité 1-6 5975288 BARCOGRAPHICS 8200 110497 Instructions pour l’utilisateur : Si cet équipement cause des inter.
Safety Instructions 5975288 BARCOGRAPHICS 8200 110497 1-7 Safety Instructions 5975288 BARCOGRAPHICS 8200 110497 1-7 Instructions to the user : if this equipment does cause interference to radio or tel.
Prescription de sécurtié 1-8 5975288 BARCOGRAPHICS 8200 110497 Presciptions de sécurité 1-8 5975288 BARCOGRAPHICS 8200 110497 * Pour débrancher le cordon, le tirer par le connecteur, jamais par le cordon lui-même.
Safety Instructions 5975288 BARCOGRAPHICS 8200 110497 1-9 Safety Instructions 5975288 BARCOGRAPHICS 8200 110497 1-9 * To disconnect the cord, pull it out by the plug.
Prescription de sécurtié 1-10 5975288 BARCOGRAPHICS 8200 110497 Presciptions de sécurité 1-10 5975288 BARCOGRAPHICS 8200 110497 * Laisser suffisamment d’espace autour du projecteur et ne pas obstruer la circulation de l’air. Ne pas mettre des feuilles libres ou d’autres objets plus près de 11 cm du projecteur.
Safety Instructions 5975288 BARCOGRAPHICS 8200 110497 1-11 Safety Instructions 5975288 BARCOGRAPHICS 8200 110497 1-11 * Do not block the projector cooling fans or free air movement under and around the projector. Loose papers or other objects may not be nearer to the projector than 4" on any side.
Prescription de sécurtié 1-12 5975288 BARCOGRAPHICS 8200 110497 Presciptions de sécurité 1-12 5975288 BARCOGRAPHICS 8200 110497 Pour garantir les meilleures performance et définition, les objectifs de projection sont spécialement traités avec un revêtement anti-reflets.
Safety Instructions 5975288 BARCOGRAPHICS 8200 110497 1-13 Safety Instructions 5975288 BARCOGRAPHICS 8200 110497 1-13 To ensure the highest optical performance and resolution, the projection lenses are specially treated with an anti-reflective coating, therefore : avoid touching the lens.
Unpacking & Dimensions 5975646 BARCOGRAPHICS 8100 090296 Unpacking & Dimensions 5975646 BARCOGRAPHICS 8100 090296 2-1 2-1 UNPACKING DIMENSIONS BATTERY INSTALLATION ON THE RCU UNPACKING DIMENSI.
Unpacking & Dimensions 2-2 5975646 BARCOGRAPHICS 8100 090296 Unpacking & Dimensions 2-2 5975646 BARCOGRAPHICS 8100 090296 Unpacking To open the banding, pull on the clip as shown in the first drawing. Take the projector out of its shipping carton and place it on a table.
Unpacking & Dimensions 5975646 BARCOGRAPHICS 8100 090296 Unpacking & Dimensions 5975646 BARCOGRAPHICS 8100 090296 2-3 2-3 Name lens L min L max (*) mm(inch) mm(inch) HD(1.2:1) 1072 (42.20) 1087 (42.79) HD(2.2:1) 1043 (41.06) 1070 (42.12) HD(3.
Unpacking & Dimensions 2-4 5975646 BARCOGRAPHICS 8100 090296 Unpacking & Dimensions 2-4 5975646 BARCOGRAPHICS 8100 090296 Battery installation in the RCU. A battery (not yet installed to save the battery life time) is delivered inside the plastic bag with the power cord.
Installation Guidelines 5975288 BARCOGRAPHICS 8200 110497 3-1 Installation Guidelines 3-1 5975288 BARCOGRAPHICS 8200 110497 INSTALLATION GUIDELINES Environment What about ambient light? Which screen t.
Installation Guidelines 3-2 5975288 BARCOGRAPHICS 8200 110497 Installation Guidelines 5975288 BARCOGRAPHICS 8200 110497 3-2 Installation guidelines Careful consideration of things as image size, ambient light level, projector placement and type of screen to use are critical to the optimum use of the projection system.
Installation Guidelines 5975288 BARCOGRAPHICS 8200 110497 3-3 Installation Guidelines 3-3 5975288 BARCOGRAPHICS 8200 110497 * Which screen type? There are two major categories of screens used for projection equipment. Those used for front projected images and those for rear projection applications.
Installation Guidelines 3-4 5975288 BARCOGRAPHICS 8200 110497 Installation Guidelines 5975288 BARCOGRAPHICS 8200 110497 3-4 * Where to install the projector? Definitions of the Abbreviation on drawings B = Distance between ceiling and top of the screen or between floor and bottom of the screen.
Installation Guidelines 5975288 BARCOGRAPHICS 8200 110497 3-5 Installation Guidelines 3-5 5975288 BARCOGRAPHICS 8200 110497 Table mounting of the BARCOGRAPHICS 8200 Ceiling mounting of the BARCOGRAPHI.
Installation Guidelines 3-6 5975288 BARCOGRAPHICS 8200 110497 Installation Guidelines 5975288 BARCOGRAPHICS 8200 110497 3-6 * How to install a projection lens? The BARCOGRAPHICS 8200 is supplied without any lens. The following lenses are available as an option : HD(1.
Installation Set Up Installation Set Up 5975288 BARCOGRAPHICS 8200 110497 4-1 4-1 5975288 BARCOGRAPHICS 8200 110497 INSTALLATION SET UP Projector configuration INSTALLATION SET UP Projector configurat.
Installation Set Up 4-2 Installation Set Up 5975288 BARCOGRAPHICS 8200 110497 5975288 BARCOGRAPHICS 8200 110497 4-2 The BARCOGRAPHICS 8200 can be installed to project images in four different configurations : front/table, front/ceiling, rear/table and rear/ceiling.
Installation Set Up Installation Set Up 5975288 BARCOGRAPHICS 8200 110497 4-3 4-3 5975288 BARCOGRAPHICS 8200 110497 To change the Configuration, enter the adjustment mode by pushing ADJUST or ENTER . Highlight Installation by pushing the control disk up or down and press ENTER to select.
Location and Functions of Control 5975288 BARCOGRAPHICS 8200 110497 5-1 Location and Functions of Control 5975288 BARCOGRAPHICS 8200 110497 5-1 LOCATION AND FUNCTION OF CONTROLS Front panel terminolog.
Location and Functions of Control 5-2 Location and Functions of Control 5975288 BARCOGRAPHICS 8200 110497 5975288 BARCOGRAPHICS 8200 110497 5-2 Front panel terminology RS 23 2 IN REM OTE PR OJ ECT OR .
Location and Functions of Control 5975288 BARCOGRAPHICS 8200 110497 5-3 Location and Functions of Control 5975288 BARCOGRAPHICS 8200 110497 5-3 Control Panel Terminology a. Local keypad Getting access 2 1 4 3 56 8 0 9 7 The keypad is located behind a door, screened with the name of the projector.
Location and Functions of Control 5-4 Location and Functions of Control 5975288 BARCOGRAPHICS 8200 110497 5975288 BARCOGRAPHICS 8200 110497 5-4 - + - + - + - + - + 0 9 7 8 6 5 4 3 2 1 ENTER 14 13 12 9.
Location and Functions of Control 5975288 BARCOGRAPHICS 8200 110497 5-5 Location and Functions of Control 5975288 BARCOGRAPHICS 8200 110497 5-5 Terminology Back light key : when activated, all keys will be lighted up and visible in the dark. ADJ. : ADJUST key, to enter the adjustment mode or for quick exit in the adjustment mode.
Power Connection Power Connection 5975288 BARCOGRAPHICS 8200 110497 6-1 6-1 5975288 BARCOGRAPHICS 8200 110497 POWER CONNECTION POWER CONNECTION.
Power Connection 6-2 Power Connection 5975288 BARCOGRAPHICS 8200 110497 5975288 BARCOGRAPHICS 8200 110497 6-2 Power (mains) cord connection DECODER MAC-INPUT VIDEO-INPUT VIDEO S-VIDEO VGA-INPUT RS 232 IN REMOTE PROJECTOR MODE : GREEN - OPERATION RED - STANDBY COMMUNICATION PORT (800-PERIPHERALS) 100-240Vac 10-4.
Power Connection Power Connection 5975288 BARCOGRAPHICS 8200 110497 6-3 6-3 5975288 BARCOGRAPHICS 8200 110497 When switching on with the power switch, the projector starts in the stand by mode. The projector mode indication lamp is red. To start image projection : a.
Power Connection 6-4 Power Connection 5975288 BARCOGRAPHICS 8200 110497 5975288 BARCOGRAPHICS 8200 110497 6-4 When the total run time of the lamp is 970 hours or more, the following message will be displayed for 1 minute. This message will be repeated every 30 minutes.
Connections Connections 5975288 BARCOGRAPHICS 8200 110497 7-1 7-1 5975288 BARCOGRAPHICS 8200 110497 INPUT MODULE CONNECTIONS Module insertion into the projector.
Connections Connections 7-2 5975288 BARCOGRAPHICS 8200 110497 5975288 BARCOGRAPHICS 8200 110497 7-2 The projector has modular input facilities. The input slots can be filled up with the following modules : Video, S-video (PAL, SECAM, NTSC) input order no.
Connections Connections 5975288 BARCOGRAPHICS 8200 110497 7-3 7-3 5975288 BARCOGRAPHICS 8200 110497 Video/S-video input module To the Video input : Composite video signals from a VCR, OFF air signal decoder, etc... 1 x BNC 1.0Vpp ± 3 dB To the S-Video input : Separate Y-luma/C-chroma signals for higher quality playback of Super VHS-signals.
Connections Connections 7-4 5975288 BARCOGRAPHICS 8200 110497 5975288 BARCOGRAPHICS 8200 110497 7-4 Push the Control disk up or down to highlight Installation and press ENTER to display the Installation menu.
Connections Connections 5975288 BARCOGRAPHICS 8200 110497 7-5 7-5 5975288 BARCOGRAPHICS 8200 110497 Straps on module level. Floating or non-floating input.
Connections Connections 7-6 5975288 BARCOGRAPHICS 8200 110497 5975288 BARCOGRAPHICS 8200 110497 7-6 RGB analog input terminals with separate Horizontal and Vertical sync inputs(RGB-HV), with Composite sync input(RGB-S) or with Sync signals on green(RGsB).
Connections Connections 5975288 BARCOGRAPHICS 8200 110497 7-7 7-7 5975288 BARCOGRAPHICS 8200 110497 RGB input selection : Key in the corresponding slot number on the RCU or the local keypad.
Connections Connections 7-8 5975288 BARCOGRAPHICS 8200 110497 5975288 BARCOGRAPHICS 8200 110497 7-8 ADJUSTMENT MODE Select a path from below : GUIDED RANDOM ACCESS INSTALLATION SERVICE Source 01 Select with or then <ENTER> <EXIT> to return.
Connections Connections 5975288 BARCOGRAPHICS 8200 110497 7-9 7-9 5975288 BARCOGRAPHICS 8200 110497 Component input module. Connect your component signals (Y-luma, R-Y and B-Y), e.g. a professional VCR to the Component input module. Component video : 4 x BNC R-Y : 0.
Connections Connections 7-10 5975288 BARCOGRAPHICS 8200 110497 5975288 BARCOGRAPHICS 8200 110497 7-10 Component input selection : Key in the corresponding slot number on the RCU or the local keypad.
Connections Connections 5975288 BARCOGRAPHICS 8200 110497 7-11 7-11 5975288 BARCOGRAPHICS 8200 110497 RGB3S/RG3sB input module. Connect your RGB signals with Tri-level sync, e.g. a professional VCR to the RGB 3 level sync input module. RGB3S/RG3sB analog : 5 x BNC Red : 0.
Connections Connections 7-12 5975288 BARCOGRAPHICS 8200 110497 5975288 BARCOGRAPHICS 8200 110497 7-12 Straps on module level : Floating or non-floating input.
Connections Connections 5975288 BARCOGRAPHICS 8200 110497 7-13 7-13 5975288 BARCOGRAPHICS 8200 110497 Connecting a computer, e.g. IBM PC (or compatible), Apple Macintosh to the RS 232 input of the projector. RS232 conne ction R G R G 100 - 230 V 9 - 4 A 60 - 50 Hz RS23 2 OUT 0 I This de v ice co mplies with Par t 15 of the FCC r ules.
Connections Connections 7-14 5975288 BARCOGRAPHICS 8200 110497 5975288 BARCOGRAPHICS 8200 110497 7-14 Connecting a RCVDS 05 to the projector. - Up to 10 or 20 inputs(video) with the RCVDS 05 and 90 inputs when RCVDS's are linked via the expansion module.
Controlling Controlling 5975288 BARCOGRAPHICS 8200 110497 8-1 8-1 5975288 BARCOGRAPHICS 8200 110497 CONTROLLING How to use the RCU. Projector address How to display a projector address. How to program an address into the RCU. Picture controls with direct access.
Controlling 8-2 Controlling 8-2 5975288 BARCOGRAPHICS 8200 110497 5975288 BARCOGRAPHICS 8200 110497 The BARCOGRAPHICS 8200 can be controlled with a. the RCU b. the hardwired RCU (cable is not included) c. the local keypad. Controlling the projector with the RCU and the hardwired RCU is equal.
Controlling Controlling 5975288 BARCOGRAPHICS 8200 110497 8-3 8-3 5975288 BARCOGRAPHICS 8200 110497 c) Point the front of the RCU directly at one of the IR sensors of the projector.
Controlling 8-4 Controlling 8-4 5975288 BARCOGRAPHICS 8200 110497 5975288 BARCOGRAPHICS 8200 110497 How to display a projector address? Press the ADDRESS key (recessed key on the RCU) with a pencil. The projector's address will be displayed in a 'Text box'.
Controlling Controlling 5975288 BARCOGRAPHICS 8200 110497 8-5 8-5 5975288 BARCOGRAPHICS 8200 110497 Contrast Control A correct 'contrast' setting is important for good image reproduction. Adjust the contrast to the level you prefer, according to room lighting conditions.
Start Up of the Adjustment Mode 9-1 Start Up of the Adjustment Mode 9-1 5975288 BARCOGRAPHICS 8200 110497 5975288 BARCOGRAPHICS 8200 110497 START UP OF THE ADJUSTMENT MODE START UP OF THE ADJUSTMENT M.
Start Up of the Adjustment Mode 9-2 Start Up of the Adjustment Mode 9-2 5975288 BARCOGRAPHICS 8200 110497 5975288 BARCOGRAPHICS 8200 110497 Adjustment Mode All source set ups, picture tunings and geometry are made while in the 'Adjustment mode' .
Start Up of the Adjustment Mode 9-3 Start Up of the Adjustment Mode 9-3 5975288 BARCOGRAPHICS 8200 110497 5975288 BARCOGRAPHICS 8200 110497 Some items in the Adjustment mode are password protected.
Guided Adjustment Mode 5975288 BARCOGRAPHICS 8200 110497 10-1 Guided Adjustment Mode 5975288 BARCOGRAPHICS 8200 110497 10-1 GUIDED ADJUSTMENT MODE GUIDED ADJUSTMENT MODE.
Guided Adjustment Mode 10-2 5975288 BARCOGRAPHICS 8200 110497 Guided Adjustment Mode 10-2 5975288 BARCOGRAPHICS 8200 110497 Select with or then <ENTER> <EXIT> to return. ADJUSTMENT MODE Select a path from below : GUIDED RANDOM ACCESS INSTALLATION SERVICE Source 01 The Guided Adjustment Mode is not active.
Random Access Adjustment Mode 5975288 BARCOGRAPHICS 8200 110497 11-1 Random Access Adjustment Mode 11-1 5975288 BARCOGRAPHICS 8200 110497 RANDOM ACCESS ADJUSTMENT MODE File Service Picture Tuning Geom.
Random Access Adjustment Mode 5975288 BARCOGRAPHICS 8200 110497 Random Access Adjustment Mode 5975288 BARCOGRAPHICS 8200 110497 11-2 11-2 Starting up the Random Access Adjustment Mode Push the control disk up or down to highlight 'Random Access' and then press ENTER .
Random Access Adjustment Mode 5975288 BARCOGRAPHICS 8200 110497 11-3 Random Access Adjustment Mode 11-3 5975288 BARCOGRAPHICS 8200 110497 File service Before using a new source, a correct file has to be installed. The projector's memory contains a list of files corresponding to the most used sources.
Random Access Adjustment Mode 5975288 BARCOGRAPHICS 8200 110497 Random Access Adjustment Mode 5975288 BARCOGRAPHICS 8200 110497 11-4 11-4 Load file Push the control disk up or down to select LOAD and press ENTER to display the Load menu. The Load menu displays the corresponding files depending on the installed filter.
Random Access Adjustment Mode 5975288 BARCOGRAPHICS 8200 110497 11-5 Random Access Adjustment Mode 11-5 5975288 BARCOGRAPHICS 8200 110497 Edit file The Edit file menu makes it possible to change the settings of the file according to the real settings of the connected source.
Random Access Adjustment Mode 5975288 BARCOGRAPHICS 8200 110497 Random Access Adjustment Mode 5975288 BARCOGRAPHICS 8200 110497 11-6 11-6 up or down to scroll to desired digit. When finished press ENTER to confirm. c. counting up or down by pushing the control disk to the right or to the left.
Random Access Adjustment Mode 5975288 BARCOGRAPHICS 8200 110497 11-7 Random Access Adjustment Mode 11-7 5975288 BARCOGRAPHICS 8200 110497 Options Source number : The source number of a non-active source can be changed to any other source number. This makes it possible to create a file for future source numbers.
Random Access Adjustment Mode 5975288 BARCOGRAPHICS 8200 110497 Random Access Adjustment Mode 5975288 BARCOGRAPHICS 8200 110497 11-8 11-8 Vertical refresh [sync/async] : The way of updating the image information on the LCD panels.
Random Access Adjustment Mode 5975288 BARCOGRAPHICS 8200 110497 11-9 Random Access Adjustment Mode 11-9 5975288 BARCOGRAPHICS 8200 110497 Rename To change the name of a selected file. Use the control disk to select RENAME and press ENTER . The Rename selection menu will be displayed.
Random Access Adjustment Mode 5975288 BARCOGRAPHICS 8200 110497 Random Access Adjustment Mode 5975288 BARCOGRAPHICS 8200 110497 11-10 11-10 Copy To copy a selected file into a new file. Use the control disk to select COPY and press ENTER . The Copy selection menu will be displayed.
Random Access Adjustment Mode 5975288 BARCOGRAPHICS 8200 110497 11-11 Random Access Adjustment Mode 11-11 5975288 BARCOGRAPHICS 8200 110497 Delete To delete a selected file out of the list of files. Use the control disk to select DELETE and press ENTER .
Random Access Adjustment Mode 5975288 BARCOGRAPHICS 8200 110497 Random Access Adjustment Mode 5975288 BARCOGRAPHICS 8200 110497 11-12 11-12 File Options Use the control disk to select OPTIONS and press ENTER . The option selection menu will be displayed.
Random Access Adjustment Mode 5975288 BARCOGRAPHICS 8200 110497 11-13 Random Access Adjustment Mode 11-13 5975288 BARCOGRAPHICS 8200 110497 Sync slow/fast Highlight sync by pushing the control disk up or down and press ENTER to toggle between SLOW and FAST.
Random Access Adjustment Mode 5975288 BARCOGRAPHICS 8200 110497 Random Access Adjustment Mode 5975288 BARCOGRAPHICS 8200 110497 11-14 11-14 Color Balance Highlight Color Balance by pushing the control disk up or down and press ENTER to select the color balance selection menu.
Random Access Adjustment Mode 5975288 BARCOGRAPHICS 8200 110497 11-15 Random Access Adjustment Mode 11-15 5975288 BARCOGRAPHICS 8200 110497 Gamma With the gamma correction adjustment, it is possible to bring the details in dark image parts more to the front (lower image values) or to reduce the importance of these details (higher gamma values).
Random Access Adjustment Mode 5975288 BARCOGRAPHICS 8200 110497 Random Access Adjustment Mode 5975288 BARCOGRAPHICS 8200 110497 11-16 11-16 Geometry Highlight Geometry by pushing the control disk up or down and press ENTER to select the geometry selection menu.
Random Access Adjustment Mode 5975288 BARCOGRAPHICS 8200 110497 11-17 Random Access Adjustment Mode 11-17 5975288 BARCOGRAPHICS 8200 110497 Size Highlight Size by pushing the control disk up or down and press ENTER to select. Select with or then <ENTER> <EXIT> to return.
Random Access Adjustment Mode 5975288 BARCOGRAPHICS 8200 110497 Random Access Adjustment Mode 5975288 BARCOGRAPHICS 8200 110497 11-18 11-18 Side keystone Highlight Side Keystone by pushing the control disk up or down and press ENTER to select.
Random Access Adjustment Mode 5975288 BARCOGRAPHICS 8200 110497 11-19 Random Access Adjustment Mode 11-19 5975288 BARCOGRAPHICS 8200 110497 Blanking Highlight Blanking by pushing the control disk up or down and press ENTER to select. Select with or then <ENTER> <EXIT> to return.
Random Access Adjustment Mode 5975288 BARCOGRAPHICS 8200 110497 Random Access Adjustment Mode 5975288 BARCOGRAPHICS 8200 110497 11-20 11-20 BLANKING TOP BOTTOM LEFT RIGHT Select with or then <ENTER> <EXIT> to return.
Random Access Adjustment Mode 5975288 BARCOGRAPHICS 8200 110497 11-21 Random Access Adjustment Mode 11-21 5975288 BARCOGRAPHICS 8200 110497 Options Highlight Options by pushing the control disk up or down and press ENTER . The Geometry Options menu will be displayed.
Installation 12-1 Installation 5975288 BARCOGRAPHICS 8200 110497 12-1 5975288 BARCOGRAPHICS 8200 110497 INSTALLATION Convergence Configuration Internal Patterns INSTALLATION Convergence Configuration .
Installation 12-2 Installation 12-2 5975288 BARCOGRAPHICS 8200 110497 5975288 BARCOGRAPHICS 8200 110497 Starting up the Installation Mode Push the control disk up or down to highlight Installation and then press ENTER . Select with or then <ENTER> <EXIT> to return.
Installation 12-3 Installation 5975288 BARCOGRAPHICS 8200 110497 12-3 5975288 BARCOGRAPHICS 8200 110497 Input Slots Highlight Input Slots by pushing the control disk up or down and press ENTER . The internal system will scan the input slots and displays the result in the Input Slots menu.
Installation 12-4 Installation 12-4 5975288 BARCOGRAPHICS 8200 110497 5975288 BARCOGRAPHICS 8200 110497 Convergence Highlight "Convergence" by pushing the control disk up or down and press ENTER to display the convergence selection menu. Every LCD panel has 6 adjustment screws.
Installation 12-5 Installation 5975288 BARCOGRAPHICS 8200 110497 12-5 5975288 BARCOGRAPHICS 8200 110497 To adjust the convergence, there are test patterns provided in the convergence menu. Use the control disk to hightlight Convergence and press ENTER to display the Convergence menu.
Installation 12-6 Installation 12-6 5975288 BARCOGRAPHICS 8200 110497 5975288 BARCOGRAPHICS 8200 110497 The three alignments influence each other, therefore repeat if neces- sary the above three steps (b,c and d). When the green pattern is correctly focused, press EXIT to return to the Convergence menu.
Installation 12-7 Installation 5975288 BARCOGRAPHICS 8200 110497 12-7 5975288 BARCOGRAPHICS 8200 110497 If both lines are correctly converged, continue with screw 4. Adjust screw 4 until line 4 is correctly converged. It is possible that line 2 and 3 have to be reconverged.
Installation 12-8 Installation 12-8 5975288 BARCOGRAPHICS 8200 110497 5975288 BARCOGRAPHICS 8200 110497 Blue on green convergence. Use the control disk to highlight Blue on green and press ENTER to display the Blue on green test pattern. Repeat the same procedure as for Red on green lines but read blue when red is indicated.
Installation 12-9 Installation 5975288 BARCOGRAPHICS 8200 110497 12-9 5975288 BARCOGRAPHICS 8200 110497 Configuration Highlight "Configuration" by pushing the control disk up or down and press ENTER to select. For more information, see Projector configuration in chapter Installa- tion Set Up.
Service Mode 5975288 BARCOGRAPHICS 8200 110497 13-1 Service Mode 5975288 BARCOGRAPHICS 8200 110497 13-1 SERVICE MODE Identification Change Password Change Language Change Projector Address Change Baud.
Service Mode 13-2 5975288 BARCOGRAPHICS 8200 110497 Service Mode 13-2 5975288 BARCOGRAPHICS 8200 110497 Starting up the Service Mode Push the control disk up or down to highlight Service and then press ENTER . Some items in the Service mode are password protected (when the password function is active).
Service Mode 5975288 BARCOGRAPHICS 8200 110497 13-3 Service Mode 5975288 BARCOGRAPHICS 8200 110497 13-3 SERVICE IDENTIFICATION CHANGE PASSWORD CHANGE LANGUAGE CHANGE PROJ. ADDRESS CHANGE BAUDRATE PC RESET LAMP RUNTIME LAMP RUNTINE HISTORY MORE... Select with or then <ENTER> <EXIT> to return.
Service Mode 13-4 5975288 BARCOGRAPHICS 8200 110497 Service Mode 13-4 5975288 BARCOGRAPHICS 8200 110497 SERVICE IDENTIFICATION CHANGE PASSWORD CHANGE LANGUAGE CHANGE PROJ. ADDRESS CHANGE BAUDRATE PC RESET LAMP RUNTIME LAMP RUNTINE HISTORY MORE... Select with or then <ENTER> <EXIT> to return.
Service Mode 5975288 BARCOGRAPHICS 8200 110497 13-5 Service Mode 5975288 BARCOGRAPHICS 8200 110497 13-5 Select with or then <ENTER> <EXIT> to return. SERVICE IDENTIFICATION CHANGE PASSWORD CHANGE LANGUAGE CHANGE PROJ. ADDRESS CHANGE BAUDRATE PC RESET LAMP RUNTIME LAMP RUNTINE HISTORY MORE.
Service Mode 13-6 5975288 BARCOGRAPHICS 8200 110497 Service Mode 13-6 5975288 BARCOGRAPHICS 8200 110497 - Baud rate : transfer speed for communication with a IBM PC (or compatible) or MAC. The baud rate of the projector must be the same as the baud rate of the connected computer.
Service Mode 5975288 BARCOGRAPHICS 8200 110497 13-7 Service Mode 5975288 BARCOGRAPHICS 8200 110497 13-7 R B V R B V 100 - 230 V 9 - 4 A 60 - 50 Hz RS232 OUT 0 I Th is de vic e compl ies with Part 15 of the F CC rules .
Service Mode 13-8 5975288 BARCOGRAPHICS 8200 110497 Service Mode 13-8 5975288 BARCOGRAPHICS 8200 110497 When the strap is on leg 2-3 or no strap is mounted, the password function is enabled, when the strap is on leg 1-2, the password function is disabled.
Service Mode 5975288 BARCOGRAPHICS 8200 110497 13-9 Service Mode 5975288 BARCOGRAPHICS 8200 110497 13-9 How to change the password ? Highlight Change password by pushing the control disk up or down and press ENTER to display the Change Password menu. Select with or then <ENTER> <EXIT> to return.
Service Mode 13-10 5975288 BARCOGRAPHICS 8200 110497 Service Mode 13-10 5975288 BARCOGRAPHICS 8200 110497 Change Projector Address Every projector requires an individual address between 0 and 255. This address can be software installed. To change that address, push the control disk up or down to highlight Change Proj.
Service Mode 5975288 BARCOGRAPHICS 8200 110497 13-11 Service Mode 5975288 BARCOGRAPHICS 8200 110497 13-11 The following baud rates are available : - 9600 - 4800 - 2400 - 1200 - 600 - 300 - 150 - 75 The actual baud rate will be highlighted. To change the baud rate, push the control disk up or down and press ENTER to accept the new baud rate setting.
Service Mode 13-12 5975288 BARCOGRAPHICS 8200 110497 Service Mode 13-12 5975288 BARCOGRAPHICS 8200 110497 Lamp Run Time History To get an overview of the different lamp run times, highlight Lamp Run Time History by pushing the control disk up or down and press ENTER .
Service Mode 5975288 BARCOGRAPHICS 8200 110497 13-13 Service Mode 5975288 BARCOGRAPHICS 8200 110497 13-13 Panel Adjustments Changing these settings may seriously affect the performance of the projector. All panel adjustments are factory adjusted. If not really necessary, do not touch one of these adjustments.
Service Mode 13-14 5975288 BARCOGRAPHICS 8200 110497 Service Mode 13-14 5975288 BARCOGRAPHICS 8200 110497 Select with or then <ENTER> <EXIT> to return.
Service Mode 5975288 BARCOGRAPHICS 8200 110497 13-15 Service Mode 5975288 BARCOGRAPHICS 8200 110497 13-15 60 Hz Tracking 60 Hz tracking is used to adjust the 60 Hz by sychronious signals Highlight 60 Hz Tracking by pushing the control disk up or down and press ENTER.
Service Mode 13-16 5975288 BARCOGRAPHICS 8200 110497 Service Mode 13-16 5975288 BARCOGRAPHICS 8200 110497 Select with or then <ENTER> <EXIT> to return.
Optional Equipment 5975288 BARCOGRAPHICS 8200 110497 14-1 Optional Equipment 5975288 BARCOGRAPHICS 8200 110497 14-1 OPTIONAL EQUIPMENT IR remote receiver Hardwired RCU RCVDS05 VS05 MAGIK interface Ada.
Optional Equipment 14-2 5975288 BARCOGRAPHICS 8200 110497 Optional Equipment 14-2 5975288 BARCOGRAPHICS 8200 110497 IR Receiver 800 This infra red receiver unit makes it possible to control the BARCOGRAPHICS 8200 from another room. There is a communication line with cable between the IR receiver and the projector or the RCVDS.
Optional Equipment 5975288 BARCOGRAPHICS 8200 110497 14-3 Optional Equipment 5975288 BARCOGRAPHICS 8200 110497 14-3 RCVDS 800 / RCVDS 05 An optional RCVDS 05 source selector makes it possible to connect up to 10 (20 if video) sources to the projector.
Optional Equipment 14-4 5975288 BARCOGRAPHICS 8200 110497 Optional Equipment 14-4 5975288 BARCOGRAPHICS 8200 110497 MAGIK Interface Multifuctional Analog Graphics Interface Kit.
Optional Equipment 5975288 BARCOGRAPHICS 8200 110497 14-5 Optional Equipment 5975288 BARCOGRAPHICS 8200 110497 14-5 number R9827640; and 30 m (100ft), order number R9827570 b. Din Mini8-D9 adapter cable. - To connect a Macintosh computer to the BARCOGRAPHICS 8200.
Optional Equipment 14-6 5975288 BARCOGRAPHICS 8200 110497 Optional Equipment 14-6 5975288 BARCOGRAPHICS 8200 110497 Projector Transport Handle 0. 72 m 1.15 m Order number : R9829170 Projector Frame for Dual or Triple Configurations The frame is designed for use in table as well as ceiling mount configurations.
Optional Equipment 5975288 BARCOGRAPHICS 8200 110497 14-7 Optional Equipment 5975288 BARCOGRAPHICS 8200 110497 14-7 Multifunctional flight case BARCO's multifunctional flight case is a special designed flight case for temporary installations of a BARCOGRAPHICS 8200 projector.
Optional Equipment 14-8 5975288 BARCOGRAPHICS 8200 110497 Optional Equipment 14-8 5975288 BARCOGRAPHICS 8200 110497 Mechanical Shutter BARCO's mechanical shutter can be used there where the display has to be totally black when the projector is set in pauze.
Appendix A : Standard Source Set Up Files 5975288 BARCOGRAPHICS 8200 110497 A-1 Appendix A : Standard Source Set Up Files 5975288 BARCOGRAPHICS 8200 110497 A-1 NAME RESOLUTION FVERT FHOR FPIX PTOT PAC.
Appendix A : Standard Source Set Up Files A-2 5975288 BARCOGRAPHICS 8200 110497 Appendix A : Standard Source Set Up Files A-2 5975288 BARCOGRAPHICS 8200 110497 NAME RESOLUTION FVERT FHOR FPIX PTOT PAC.
Appendix A : Standard Source Set Up Files 5975288 BARCOGRAPHICS 8200 110497 A-3 Appendix A : Standard Source Set Up Files 5975288 BARCOGRAPHICS 8200 110497 A-3 NAME RESOLUTION FVERT FHOR FPIX PTOT PAC.
Appendix A : Standard Source Set Up Files A-4 5975288 BARCOGRAPHICS 8200 110497 Appendix A : Standard Source Set Up Files A-4 5975288 BARCOGRAPHICS 8200 110497 NAME RESOLUTION FVERT FHOR FPIX PTOT PAC.
Appendix B : Battery Replacement in the RCU 5975288 BARCOGRAPHICS 8200 110497 B-1 Appendix B : Battery Replacement in the RCU 5975288 BARCOGRAPHICS 8200 110497 B-1 Battery replacement in the RCU. Remove the battery cover on he backside of the remote control by pushing the indicated handle a little to the bottom of the RCU.
Appendix C : Focusing the Lens 5975288 BARCOGRAPHICS 8200 110497 C-1 Appendix C : Focusing the Lens 5975288 BARCOGRAPHICS 8200 110497 C-1 Focusing the lens Lens holder Fast ener Lens Loosen the fastener ring of the lens by turning counter clockwise. Focus the image by turning the lens barrel to the left or the right.
Appendix D : Lens Cleaning Procedure 5975288 BARCOGRAPHICS 8200 110497 D-1 Appendix D : Lens Cleaning Procedure 5975288 BARCOGRAPHICS 8200 110497 D-1 Lens Cleaning Procedure Cleaning procedure for HD(1.
Appendix D : Lens Cleaning Procedure D-2 5975288 BARCOGRAPHICS 8200 110497 Appendix D : Lens Cleaning Procedure D-2 5975288 BARCOGRAPHICS 8200 110497 the lens. Wipe at a speed that is equal to the evaporation rate. This is very important to prevent streaking and spotting.
Appendix E : Source Number 90 - 99 5975288 BARCOGRAPHICS 8200 110497 E-1 Appendix E : Source Number 90 - 99 5975288 BARCOGRAPHICS 8200 110497 E-1 Source numbers 90 - 99 These source numbers do not correspond to physical inputs. They can only be used when the projector is equipped with a RCVDS 05 or VS05.
Appendix F : Lenses 5975288 BARCOGRAPHICS 8200 110497 F-1 Appendix F : Lenses 5975288 BARCOGRAPHICS 8200 110497 F-1 Lenses This APPENDIX gives an overview of the tables and formulas for the available lenses for the BARCOGRAPHICS 8200. The next lenses are available : Name length lens diam.
Appendix F : Lenses F-2 5975288 BARCOGRAPHICS 8200 110497 Appendix F : Lenses F-2 5975288 BARCOGRAPHICS 8200 110497 Lens formulas to calculate the projector distance. HD(1.2:1) Metric PD=1.264 x SW + 0.126 + (0.018/SW) Inch PD= 1.264 x SW + 4.961 + (27.
Insert card RCU 5975288 BARCOGRAPHICS 8200 110497 Insert card RCU 5975288 BARCOGRAPHICS 8200 110497 P RCU INPUT SOURCES 1 PR OJ ECTO R RCVDS 2 3 4 5 6 1 2 3 5 6 7 8 9 10 INPUT SOURCES 7 P RCU INPUT SO.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Barco R9001330 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Barco R9001330 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Barco R9001330, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Barco R9001330 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Barco R9001330, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Barco R9001330.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Barco R9001330. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Barco R9001330 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.