Manuel d'utilisation / d'entretien du produit KB.I170A.127 du fabricant Acer
Aller à la page of 202
Aspire 5532 Service Guide PRINTED IN T AIW AN Service guide files and updates are availab le on the ACER/CSD web; for more information, please refer to http://csd.
II Revision History Please refer to the table below for the updates ma de on Aspire 5532 service guides. Date Chapter Up dates.
III Copyright Copyright © 2009 by Acer Incorporated. All rights rese rved. No part of this pub lication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into a.
IV Conventions The following conventi ons are used in this manual: SCREEN MESSAGES Denotes actual messages that appe ar on screen. NOTE Gives bits and pieces of additional information related to the current topic. W ARNING Alerts you to any damage that might result from doing or not doing specific actions.
V Preface Before using this information and the product it s upports, please read the fo llowing general info rmation. 1. This Service Guide provides you with all techni cal information relating to the BASIC CON FIGURA TION decided for Acer's "glo bal" product offering.
VI.
VII T able of Contents System Specifications 1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 System Block Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . .
VIII T able of Contents Removing the Power Board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63 Removing the Left Speake r Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 Removing the Right Speake r Module .
IX T able of Contents External Mouse Failure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .131 Other Failures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .131 Intermittent Problems .
X T able of Contents.
Chapter 1 1 System Specifications Features Below is a brief summary of the computer ’s many features: NOTE: Items denoted with a (*) are available for select models only .
2 Chapter 1 Audio • Realtek ALC272X-GR for High Defini tion Audio Codec with Dolby Digital Live • Internal speakers x2 (2W) • Mic-in jack • Headphone/Line out jack Dimensions and Weight • 372.3mm x 246.5mm x 26.8mm/40.6mm with ID • Weight < than 3100g (15 .
Chapter 1 3 I/O interface • VGA port, 15 pins • DC-IN port for adapter • RJ-45 Ethernet port for LAN • 2 USB port • Headphone out / Line-out • Microphone-in • Multi-in-1 card reader (SD™, MMC, MS, MS PRO, xD • Kensington Lock (7.
4 Chapter 1 System Block Diagram.
Chapter 1 5 Your Acer Notebook tour After knowing your computer features, le t us show you around you r new computer . Front View No. Icon Item Description 1 Acer Crystal Ey e webcam Web camera for video communication (for selected models). 2 Display screen Also called Liquid-Crystal Display (LCD), displays computer output.
6 Chapter 1 Closed Front View NOTE: 1 The front pa nel indicators are visi ble even when th e computer cover is closed 7 Click buttons (left and right) The left and right buttons function like the left and right mouse bu ttons. 8 Palmrest Comfortable support area for your ha nds when you use the computer .
Chapter 1 7 Rear View Left View No. Icon Item Description 1 V entila tion slots Enable the computer to stay cool, even after prolonged use. No. Icon Item Description 1 DC-in jack Connects to an AC adapter 2 Ethernet (RJ-4 5) port Connects to an Ethernet 10/100-based network.
8 Chapter 1 Right View Bottom View No. Item Description 1 Optical drive Internal optica l drive; accepts CDs or DVDs. 2 Optical disk access indicator Lights up when the optical drive is active. 3 Optical drive eject button Ejects the optical disk from the drive.
Chapter 1 9 3 Battery lock Locks the battery in position. 4 Hard disk bay Houses the computer's hard disk (secured with screws). 5 Memory compartment Houses the computer's main memory . 5 V entilation s lots and cooling fan Enable the computer to stay cool, even after prolonged use.
10 Chapter 1 Indicators The computer has several easy-to-read status indicators . T he front panel indicato rs are visible even wh en the computer cover is closed. NOTE: 1. Chargi ng: The light shows amber when the battery is charging. 2. Fully ch arged: The light sho ws green when in AC mode.
Chapter 1 11 TouchPad Basics The following items show you how to use the T ouchPa d: • Move your finger across the T ouchPad (1) to move th e cursor . • Press the left (2) and right (3) buttons located beneath the T ouchPad to perform selection and execution functions.
12 Chapter 1 Using the Keyboard The keyboard has full-sized keys and an embedded numeric keypad, separate cursor , lock, Windows, fun ction and special keys. Lock Keys and embedded numeric keypad The keyboard has three lock keys which yo u can toggle on and off.
Chapter 1 13 Windows Keys The keyboard has two keys that perform Wi ndows-specific functions. Key Description Windows key Pressed alone, this key ha s the same effect as clicking on the Windows St art button; it launches the S tart menu.
14 Chapter 1 Hot Keys The computer employs hotkeys or key combinations to access most of the computer ’s controls like screen brightness, volume out put and the BIOS utility . T o activate hot keys, press and hold the < Fn> key before pressing the other key in the hotkey combination.
Chapter 1 15 Special Key Y ou can locate the Euro symbol and the US dollar si gn at the upper-center and/or bottom-right of your keyboard. The Euro symbol 1. Open a text editor or word processor. 2. Hold <Alt Gr> and the n press the <5> key at the upper-cente r of the keyboa rd.
16 Chapter 1 Using the System Utilities Acer GridVista (dual-display compatible) NOTE: This feature is only available on certain models. T o enable the dual monitor featu re of the notebook, firs t ensure that the second moni tor is conn ected, then select St art, Control Panel, Display and click on Settings .
Chapter 1 17 Hardware Specifications and Configurations Processor Processor Specifications CPU Fan T rue V alue T able • Throttling 50%: On=90 °C, Off=80°C • OS Shutdown: 95°C • H/W Shutdown: 92°C Northbridg e Southbridge BIOS Item Specification CPU • AMD Athlon64 Dual-Core Process, Cache 1MB, TK42 • AMD Athlon 64 Process, 1.
18 Chapter 1 System Memory Memory Combinations NOTE: Above table lists s ome system memory configur ations. Y ou may combine DIMMs with various capacities to form other combinations.
Chapter 1 19 reversed. LAN Interface Wireless Module 802.1 1b/g/n Hard Disk Drive Interface Super-Multi Drive Item Specification LAN Chipset Atheros AR8132L Package 48 pin QFM LAN connector type RJ45 .
20 Chapter 1 Audio Interface Power and Keyboard Controller T ransfer rate (MB/sec) Sustained: 3,600 KB/s (24x) max. Sustained: 1 1.08 Mbytes/s (8x) max. Sustained: 1,571 (typical) Sustained: 10,993 (typical) Buffer Memory 2 MB Interface SA T A Applicable disc formats • DVD-ROM: • 4.
Chapter 1 21 Battery LCD 15.6” Card Reader Supply Current T otal number of keyp ads 99-/100-/103-key keyboard Windows logo key Y es Hotkeys See “Hot Keys” on page 14. Item Spec ification 6 Cell V endo r & model name SANYO/SONY/P ANASONIC/SIMPLO AS2009A Battery T ype Li-ion Pack capacity 4400 mAh Normal V oltage 2.
22 Chapter 1 General Features • PCI-E interface • Push-push type •D u m m y c a r d Item Specification.
Chapter 2 23 System Utilities BIOS Setup Utility The BIOS Setup Utility is a hardware configuration prog ram built into y our computer ’s BIOS (Basic Input/ Output System). Y our computer is al ready properly configured and optimi zed, and you do not need to run this utility .
24 Chapter 2 Aspire 5532 BIOS Information The Information screen displays a summary of your computer ha rdware information. NOTE: The screen above is for your reference only . Actual values may differ according to model. The table below describes the parameters in this screen.
Chapter 2 25 Main The Main screen allows th e user to set the system time and date as well as enable and disa ble boot option and recovery . NOTE: The screen above is for your reference only . Actual values may differ . The table below describes the parameters in this screen.
26 Chapter 2 Security The Security screen co ntains parameters that help sa feguard and protect your co mpu ter from unauthorized use. The table below describes the parameters in this screen. Settings in boldface are the default and suggested parameter settings.
Chapter 2 27 Setting a Password Follow these steps as you set the user or the supervisor password: 1. Use the ↑ and ↓ keys to highlight the Set Supe rvisor Password parameter and press the Enter key . The Set Supervisor Password box appears: 2. T ype a password in the “Enter New Password” fiel d.
28 Chapter 2 Changing a Password 1. Use the ↑ and ↓ keys to highlight the Set Supe rvisor Password parameter and press the Enter key . The Set Password box appears. 2. T ype the current passw ord in the Enter Cur rent Password fiel d and press Enter .
Chapter 2 29 Boot This menu allows the user to deci de the order of boot de vices to load the operatin g system. Bootable devices includes the USB diskette drives, the onboard hard disk dr ive and the DVD drive in the module ba y . Select Boot Devices to select specific devices to support boot.
30 Chapter 2 Exit The Exit screen allows you to save or discard any changes you made an d qui t the BIOS Utility . The table below describes the parameters in this screen. Parameter Description Exit Saving Changes Exit System Setu p and save your changes to CMOS.
Chapter 2 31 BIOS Flash Utilities The BIOS flash memory upd ate is required for th e following conditions: • New versions of system programs • New features or options • Restore a BIOS when it becomes corrupted. Use the Phlash util ity to update the system BIOS flash ROM.
32 Chapter 2 DOS Flash Utility Perform the following steps to use the DOS Flash Utility: 1. Press F2 during boot to enter the Setup Men u. 2. Select Boot Menu to modify the boot priority orde r , for ex ample, if using USB HDD to Update BIOS, move USB HDD to position 1.
Chapter 2 33 4. In flash BI OS, the me ssage Please do not remove AC Power Source displays. Plug in the AC po wer to continue. 5. Flash is complete when the message Flash programming complete displays. WinFlash Utility Perform the following steps to use the WinFlash Utility: 1.
34 Chapter 2 Remove HDD/BIOS Password Utilities This section provide s you with d e tails about removing HDD/BIOS password: Remove HDD Password: If you key in the wrong HDD password three times, an error is gen erated. T o reset the HDD p assword, perform the following step s: 1.
Chapter 2 35 Removing BIOS Passw ords: T o clear the User or Supervisor passwords through hardware, open the WLAN door and use a metal instrument to short the J1 jumper. Cleaning BIOS Passwords T o clean the User or Supervisor passwords using software utilites, perform the following steps: 1.
36 Chapter 2 The onscreen message determines whether the func tion is successful or not. Using Boot Sequence Selector The Boot Sequen ce Selector allows the b oot order to be changed without accessing the BIOS. T o use Boot Sequence Selector , perform the following steps: 1.
Chapter 2 37 Using DMITools The DMI (Desktop Management Interface) T ool copies BIOS information to EEPR OM to be used in the DMI pool for hardware managemen t. When the BIOS displays V erifying DMI pool data it is checki ng that the t able correlates with th e hardware before sending to the operating system (Windows, etc.
38 Chapter 2 Using the LAN MAC EEPROM Utility Y ou can use the MAC.BA T utility to write t he MAC.CFG file to the EEPROM under DOS mode. 1. Use a text editor (for example: Notepad) to open the MAC.CFG file. Y ou can see the MAC.CFG contents as below: 2.
Chapter 3 39 Machine Disassembly and Replacement IMPORT ANT : The outside housing and color may vary from the mass produced model. This chapter contains step-by-s tep procedures on how to disass emble the notebook computer for maintenance and troubleshooting .
40 Chapter 3 Pre-disassembly Instructions Before proceeding with the disassembly procedure, make su re that you do the following: 1. T urn off the power to the system and all peripherals. 2. Unplug the AC adapter and all power and signal cab les from the system.
Chapter 3 41 External Module Disassembly Process IMPORT ANT : The outside housing and color may vary from the mass produced model. External Modules Disassembly Flowchart The flowchart below gives you a graphic represen tati on of the external module disassembly sequence and instructs you on the components that need to be removed du ring servicing.
42 Chapter 3 Removing the Battery Pack 1. T urn computer over . Slide the battery lock in the direction shown. 2. Slide and hold the battery rel ease latch to the release po sition (1), then lift out the battery pack from the main unit (2).
Chapter 3 43 Removing the SD Dummy Card 1. Push the SD dummy card all the way in to eject it . 2. Pull it out from the slot..
44 Chapter 3 Removing the Lower Covers 1. See “Removing the Battery Pack” on page 42. 2. Remove the three (3) screws securing the Memory and HDD Covers. 3. Remove the HDD cover as shown. 4. Carefully open the Memory Cover . Ste p Size Quantity Screw T ype Lower Covers M2.
Chapter 3 45 Removing the Optical Drive Module 1. See “Removing the Battery Pack” on page 42. 2. Remove the screw securing the ODD module. 3. Insert a suitable tool into the access slot in the battery bay as shown. G ently lever the ODD module out of the chassis.
46 Chapter 3 5. Remove the two (2) screws se curing the ODD bracket a nd remove the ODD b racket from the optical disk drive module. 6. Remove the ODD bezel by pulling the top edge downward and clea r of the module.
Chapter 3 47 Removing the DIMM Modules 1. See “Removing the Lower Covers” on page 44. 2. Push out the release latches on both sides of the DIMM socket to release th e DIMM module. 3. Remove the DIMM module. 4. Repeat steps for the seco nd DIMM module if present.
48 Chapter 3 Removing the WLAN Module 1. See “Removing the Lower Covers” on page 44. 2. Remove the adhesive tape securing the Antenna cables in place. 3. Disconnect the antenna cables from the WL AN Board. NOTE: Cable placement is Black to the MAIN terminal and White to the AUX terminal.
Chapter 3 49 4. Move the antenna away and remove the two (2) screws to release the WLAN Board . 5. Detach the WLAN Board from the WLAN socket. Ste p Size Quantity Screw T ype WLAN Module M2*3 2.
50 Chapter 3 Removing the Hard Disk Drive Module 1. See “Removing the Lower Covers” on page 44. 2. Using the pull-tab, slide the HDD Module in the di rection of the arrow to disconnect the interface. 3. Lift the HDD Module clear of the HDD bay . NOTE: T o prevent damage to device, avoid pressing down on it or placing heavy objects on top of it.
Chapter 3 51 4. Remove the four (4) screws (two each side ) securing the hard disk to the carrier . 5. Remove the HDD from the carrier . Ste p Size Quantity Screw T ype HDD Carrier M3*3 4.
52 Chapter 3 Main Unit Disassembly Process Main Unit Disassembly Flowchart Screw List Ste p Screw Quantity Part No. LCD Module M2.5*8 2 86.N28 02.003 LCD Module M2.5*8 4 86.N28 02.003 Upper Cover M2.5*8 1 1 86.N2802.003 Upper Cover M2.5*8 9 86.N2802.003 Power Board M2*3 2 86.
Chapter 3 53 Removing the Switch Cover CAUTION: Using metal tools to remove the Switch Cover may cause damage to the outer casing. The use of plastic tools or fingers is recommended to remove the Switch Cover . 1. See “Removing the Battery Pack” on page 42.
54 Chapter 3 Removing the Keyboard 1. See “Removing the Switch Cover” on page 53. 2. Pry up the centre of the Keyboard and rotate it upward awa y from the Upper Cover . 3. T urn the keyboard over o n to the T ouchPad area to expose the FFC connector .
Chapter 3 55 Removing the LCD Module 1. See “Removing the Keyboard ” on page 54. 2. T urn the computer over . Remo ve the two (2) se curing screws from the bottom of the chassis. 3. Remove the Antenna Cables from the cable channe l as sh own. Ensure that the cables are free from all cable clips.
56 Chapter 3 4. S tand the computer on the LCD Panel and pull the Antenna cab les completely through the chassis. 5. Disconnect the LCD cable from the Mainboard and remove the cable from the cable channel. 6. Remove the white Antenna cable from the cable channe l.
Chapter 3 57 7. Remove the adhesive tape securing the Antenna cable to the Upper Cover . 8. Remove the black Antenna cable from the cable channel as shown. Ensure that the cable is completel y free of the retaining clips all the way to the hinge well.
58 Chapter 3 12. Remove the four (4) securing screws (two each side) from the LCD module. 13. Remove the lef t and right screw covers from on top of the hinges 14. Lif t the LCD Module clear of the Upper Cover . Ste p Size Quantity Screw T ype LCD Module M2.
Chapter 3 59 Removing the Upper Cover 1. See “Removing the LCD Module” on page 55. 2. T urn the computer over . Remo ve the eleven screws on the bottom panel. 3. T urn the computer over . Remo ve the three (3) screw caps at the rear of the Upper Cover as shown.
60 Chapter 3 4. Disconnect the following four (4) cables from the Ma inboard. A B C D.
Chapter 3 61 NOTE: Avoid pulling on cables directly to prevent damage to the connectors. NOTE: Use the pull-tabs on FFCs whenever available to prevent damage . 5. D isconnect A as shown. 6. Disconnect C as shown. 7. R elease the locking latch on B and remove th e FFC cable as shown.
62 Chapter 3 9. Remove the nine (9) screws on the top panel. 10. S tarting at the rear left side of t he cover , pry apart the Upper and Lower Covers as shown. Work along the back edge of the casing to the right as shown, then lift the Upper Cover clear of the Lower Cover .
Chapter 3 63 Removing the Power Board 1. See “Removing the Upper Cove r” on page 59. 2. Locate the Power Board on the Upper Co ver as shown. 3. Remove the two (2) screws securing the Power Board to the Upper Co ver . 4. Lift the Power Board clear of the Upper Cover as shown .
64 Chapter 3 Removing the Left Speaker Module 1. See “Removing the Upper Cove r” on page 59. 2. Locate the Left S pe aker Module on the Uppe r Cover as shown. 3. Remove the adhesive tape from the S peaker cable . 4. Remove the S peaker cable from the cable channel.
Chapter 3 65 5. Remove the one (1) securing screw from the Left S peaker Module . 6. Lift the S peaker clear of the Upper Cover , left side first as shown.
66 Chapter 3 Removing the Right Speaker Module 1. See “Removing the Upper Cove r” on page 59. 2. Locate the Right S peaker Module on the Upper Cover as shown. 3. T urn the Upper Cover over and remove the Right S peake r Module cable from the cable channel.
Chapter 3 67 5. Remove the one (1) securing screw from the Right S peaker Module. 6. Lift the S peaker clear of the Upper Cover , right side first as shown.
68 Chapter 3 Removing the TouchPad Bracket IMPORT ANT : The T ouchPad Board cann ot be removed individua lly . T o replace the T ouchPad Board, replace the entire Upper Cover . 1. See “Removing the Upper Cove r” on page 59. 2. Lift the FFC to detach the adhesive securing the cable to the Upper Cover .
Chapter 3 69 4. Remove the two (2) screws from T ouchPad bracket. 5. Lift the rear edge of the T ouchPad bracket first to clear the se curing clips and remove it as shown.
70 Chapter 3 Removing the Mainboard 1. See “Removing the Upper Cove r” on page 59. 2. Remove the one (1) securing screw from the Mainboard. 3. Lift the mainboard from the chassis, right edge fi rst, and place it on a clean, dust-free surface. Ste p Size Quantity Screw T ype Mainboard M2.
Chapter 3 71 Removing the RTC Battery IMPORT ANT : Follow local regulations fo r disposal of all batteries. The RTC Battery is soldered to the Mainboard.
72 Chapter 3 Removing the Thermal Module 1. See “Removing the Lower Covers” on page 44. 2. T urn the Mainboard over to access the Thermal Module. 3. Remove the four (4) securing screws (in reverse numeri cal orde r from screw 4 to screw 1) from the Thermal Module.
Chapter 3 73 4. Using both hands, lift the Thermal Module clear of the Mainboard..
74 Chapter 3 Removing the CPU Fan 1. See “Removing the Therma l Module” on page 72. 2. Disconnect the Fan cable from the Mainboard as shown . 3. Remove the three (3) securing screws from the Fan Module.
Chapter 3 75 4. Lift the CPU Fan clear of the Mainboard as shown..
76 Chapter 3 Removing the CPU IMPORT ANT : The pins on the underside of the CPU are very delicate. If they are damag ed, the CPU may malfunction. Place the CPU on a clean, dry surface when it is not installed. 1. See “Removing the Therma l Module” on page 72.
Chapter 3 77 LCD Module Disassembly Process LCD Module Disassembly Flowchart Screw List Ste p Screw Quantity Part No. LCD Bezel M2.5*6 4 86.N2802.0 02 LCD Panel M2 .
78 Chapter 3 Removing the LCD Bezel 1. See “Removing the LCD Module” on page 55. 2. Remove the two (2) upper and two (2) lower bezel screw caps and screws. 3. S tarting from the bottom edge of t he bezel, pry the bezel upwards an d aw ay from the panel.
Chapter 3 79 Removing the Camera Module 1. See “Removing the LCD Bezel” on page 78. 2. Locate the Camera Module at the top of the LCD Module and disconnect the camera cabl e.
80 Chapter 3 Removing the LCD Panel 1. See “Removing the Camera Module” on page 79. 2. Remove the two (2) securing screws from the LCD Panel. 3. Remove the adhesive strip holding the cables in place. 4. Remove the Camera cable cluster from the LCD Module as shown.
Chapter 3 81 5. Lift the LCD Panel clear of the module..
82 Chapter 3 Removing the LCD Brackets and FPC Cable 1. See “Removing the LCD Panel” on page 80. 2. Remove the six (6) securing screws (three on each side) from the LCD Panel brackets. 3. Remove the LCD brackets by pulling away from the LCD Panel.
Chapter 3 83 4. T urn the LCD panel over to expose th e rear . L ift the adhesive protector and disconnect the cable fro m the LCD Panel. 5. Lift the cable as shown to disengage the adhesive strip securing it in place. 6. Lift the FPC cable to disengage the remaining adhesive and remove the cable from the panel.
84 Chapter 3 Removing the Antennas 1. See “Removing the LCD Panel” on page 80. 2. Remove the adhesi ve strips holding the left ante nna cabl e in place. Ensure the cabl e is free from obstructions. 3. Remove the cable from the cable channel. Ensure that the cab le is free from all cable clips and adhesive strips.
Chapter 3 85 5. Lift the left Antenna clear of the cover . 6. Remove the adhesive strips holding the right antenna cable in pla ce. Ensure the cable is free from obstructions. 7. Remove the cable from the cable channel. Ensure that the cab le is free from all cable clips and adhesive strips.
86 Chapter 3 8. Remove the adhesive foil securing t he right Antenna to the LCD Module. 9. Lift the right Antenna clear of the cover ..
Chapter 3 87 LCD Module Reassembly Procedure Replacing the Antennas 1. Replace the right Antenna as shown. Ensure that th e locating pins on the Antenna are co rrectly seated. 2. Replace the adhesive foil to secure the Antenna in place. 3. Ru n the cable down th e side of the LCD Module using all available cli ps and adhesive.
88 Chapter 3 5. Replace the left Antenna as shown. Ensure that the locatin g pins on the Antenna are correctly seated. 6. Replace the adhesive strip to secure the Antenna in place. 7. Ru n the cable down th e side of the LCD Module using all available cli ps and adhesive.
Chapter 3 89 9. The Antennas and cables appear as shown when corre ctly installed..
90 Chapter 3 Replacing the LCD Panel 1. Connect the LCD cable to the panel connector as shown. 2. Press dow n the adhesive strip to secure the cable in place. 3. Run the cable along the back of the panel and press down as indicated to secure the cable in place.
Chapter 3 91 5. Align the LCD brackets with the screw holes on the panel. Replace the si x (6) screws (three o n each side) in the brackets as shown. 6. Place the LCD Panel in the LCD Module, top edge first, and secure the LCD cable with adhe sive tape.
92 Chapter 3 Replacing the Camera Module 7. Replace the Camera cable clu ster in the LCD Module. 8. Secure the LCD module with the two (2) securing screws.
Chapter 3 93 Replacing the LCD Bezel 1. Replace the bezel and press down until th ere are no gaps between the bezel and the LCD Module. IMPORT ANT : Ensure that the LCD cables pass through th e hinge wells and are not trapped by the bezel.
94 Chapter 3 2. Replace the four (4) screws and screw caps provided..
Chapter 3 95 Main Module Reassembly Procedure Replacing the CPU IMPORT ANT : The CPU has a Pin1 locator that must be positi oned corresponding to the marker on the CPU socket. 1. Place the CPU into the CPU socket as shown, taking note of the Pin1 locator .
96 Chapter 3 Replacing the CPU Fan Replacing the Thermal Module IMPORT ANT : Apply a suitable thermal grease and ensure all heat pads are in place before replacing the Thermal Module.
Chapter 3 97 Replacing the Mainboard 3. Align the screw holes on the Therma l Module and Mainboard then replace the modul e. Keep the module as level as possible to spread the thermal grease evenly . 4. Re place the four (4) securing screws (in numerical order from screw 1 to screw 4) to secur e the Thermal Module in p lace.
98 Chapter 3 Replacing the TouchPad Bracket 1. Replace the T ouchPad bracket top edge first to engage the securing clips. 2. Press the bracket down to engage the securing clips. 3. Replace the two (2) screws to secure the T ouchPad Bracket to the Upper Cover.
Chapter 3 99 5. Replace the FF C and press down a s indicated to secure it to the Up per Cover ..
100 Chapter 3 Replacing the Right Speaker Module 1. Place the module left side first on the Upper Cover as shown. Ensure that the left side of the module is seated correctly in the securing clip. 2. Replace the one (1) scre w to secure the mod ule in place.
Chapter 3 101 Replacing the Left Speaker Module 1. Place the module right side first on the Upper Cover as shown. Ensure that the right side of the module is sea ted correctly in the securing clip. 2. Replace the one (1) scre w to secure the mod ule in place.
102 Chapter 3 Replacing the Power Board Replacing the Upper Cover 1. Slide the Power Board in to the Upper Cover front edge first to engage the securing clip. 2. Press the board down to locate the se curing pin. 3. Replace the two (2) screws to secure the board to the Upper Cover .
Chapter 3 103 2. Press down around the edges to secure it in place. 3. Replace the nine (9) screws in the Upper Cover as shown..
104 Chapter 3 4. Replace the three (3 ) screw caps as shown. 5. Connect the following cables to the Mainboard. A B C D.
Chapter 3 105 6. Connect A as shown. 7. Connect C as shown. 8. Connect B and close the locking latch to secure the cable in place. 9. Connect D and close the locking latch to secure the cable in place.
106 Chapter 3 Replacing the LCD Module 10. T urn the co mputer over and replace the eleven screws as shown. 1. Align the screw holes on the LCD Module and Upper Cover and replace the LCD Module. 2. The left and right screw covers are shaped differently .
Chapter 3 107 4. Replace the right screw cove r as shown. Ensure that the securing tab on the rear of the cover is seated correctly in the Upper Cover . 5. Replace the four (4) screws securing the LCD Module to the Upper Cover. 6. Ensure that the Hinge Covers are replaced correctly .
108 Chapter 3 9. Run the black Antenna cable along the cable channel as shown using all available retaining clips. 10. Replace the adhesive strip to secure the cable in place. 11 . Run the white Antenna cable along the cable channel as shown using all available retaining clips.
Chapter 3 109 14. S tand the computer o n the LCD Panel and pass the An tenna cables th rough the chassi s. 15. The Upper Cover appears as shown when the Ant enna and LCD cables are correctly installed. 16. T urn the co mputer over . Run the Antenna cables alon g the cab le channel as show n, using all a vailable cable clips.
11 0 Chapter 3 17. Replace the two (2) screws securing the LCD Module to the Lower Cover ..
Chapter 3 111 Replacing the Keyboard 1. C onnect the Keyboard FFC to the Mainboard and cl os e the locking latch to secure the cable in pl ace. 2. Turn the Keyboard over and in sert it front edge first into the chassis. NOTE: Ensure that the six (6) locating tabs are correctly seated.
11 2 Chapter 3 Replacing the Switch Cover Replacing the Hard Disk Drive Module 1. Place the Switch Cover left side first on to the Upper Co ver . 2. Press down as indicated to snap the Switch Cover into place. 1. Place the HDD in the HDD carrier . 2. Replace the four (4) screws (two each side) to secure the carrier .
Chapter 3 11 3 3. Insert the HDD, as indica ted and lower it into place. 4. Slide the HDD in the direction of the arrow to connect the interface ..
11 4 Chapter 3 Replacing the WLAN Module Replacing the DIMM Modules 1. Insert the WLAN Module into the WLAN socket. 2. Repl ace the two (2) screws to secure the module. 3. Connect the two (2) An tenna cables to the modu le. NOTE: The black cable connects to the upp er terminal (MAIN) and the white cable to the lower terminal (MAIN).
Chapter 3 11 5 Replacing the ODD Module Replacing the Lower Covers 1. Press the bezel into the tr ay , bottom edge fi rst, to secure it to the ODD Module. 2. Secure the ODD bracket with the two (2) screws. 3. Push the ODD Module into the ODD bay until it is flush with the casing.
11 6 Chapter 3 Replacing the SD Dummy Card 3. Replace the three (3) screws to secure the covers in place. 1. Insert the SD Dum my Card into the slot as shown.
Chapter 3 11 7 Replacing the Battery 1. Slide and hol d the battery rele ase latch to the release po sition (1 ), insert the batter y pack and press down (2).
11 8 Chapter 3.
Chapter 4 11 9 Troubleshooting Common Problems Use the following procedure as a gui de for computer problems. NOTE: The diagnosti c tests are intended to test only Acer products. Non-Acer products, prototype cards, or modified options can give false e rrors and invalid system responses.
120 Chapter 4 Power On Issue If the system doesn’t power on, perform the following acti ons one at a time to correct the problem. Do not replace a non-defective FRUs: Computer Shutsdown Intermittently If the system powers off at intervals, perform the fo llowing actions one at a time to correct the problem.
Chapter 4 121 No Display Issue If the Displa y doesn’t work, perform the following actions one at a time to correct the prob lem. Do not replace a non-defective FRUs: No POST or Video If the POST or video doesn’t display , perform the foll owing actions one at a time to correct the problem.
122 Chapter 4 Abnormal Video Display If video displays abnormally , perform the following actions one at a time to correct the proble m. 1. Reboot the computer . 2. If permanent vertical/h orizontal lines or dark spots display in the same location, the LCD is faulty and should be replaced.
Chapter 4 123 LCD Failure If the LCD fails, perform the following actions one at a time to correct the problem. Do not replace a non- defective FRUs: Built-In Keyboard Failure If the built-in Keyboard fails, perform the foll owing actions one at a ti me to correct the problem.
124 Chapter 4 TouchPad Failure If the To u c h P a d doesn’t work, perform the following actions one at a time to correct the problem. Do not replace a non-defective FRUs: Internal Speaker Failure If the internal Speakers fail, perform the following actions one at a time to correct the probl em.
Chapter 4 125 Sound Problems If sound problems are experienced, p erform the following actions one at a time to correct the problem. 1. Reboot the computer . 2. Navigate to Start ´ Control Panel ´ System and Maintenance ´ System ´ Device Manager .
126 Chapter 4 HDD Not Operating Correctly If the HDD does not op erate correctly , perform the following ac ti ons one at a time to correct the problem. 1. Disconnect all external devices. 2. Run a complete virus scan using up-to-date software to ensure the computer is virus free.
Chapter 4 127 ODD Failure If the ODD fails, perform the following acti ons one at a time to correct the problem. Do not replace a non- defective FRUs: ODD Not Operating Correctly If the ODD exhibits a.
128 Chapter 4 a. Double-click lDE A T A/A T API controllers . If a device displa ys a down arrow , right-click on the device and click Enable . b. Double-click DVD/C D-ROM d rives . If the device displays a down arrow , right-click on the device and click Enable .
Chapter 4 129 b. Double-click IDE A T A/A T API controllers , then right-click A T A Device 0. c. Click Properties and select the Advanced Settings tab. Ensure that the Enable DMA box is checked and click OK . d. Repeat for the other A T A Devices shown if applicable.
130 Chapter 4 Wireless Function Failure If the WLAN fails, perform th e following actions one at a time to correct th e problem. Do not replace a non - defective FRUs: Thermal Unit Failure If the Thermal Unit fa ils, perform the following actions one at a time to correct the problem.
Chapter 4 131 External Mouse Failure If an external Mouse fails, perform the following actions one at a time to correc t the problem. 1. T ry an alternative mouse. 2. If the mouse uses a wireless connecti on, insert new batteri es and confirm there is a good connection.
132 Chapter 4 Intermittent Problems Intermittent system hang problems can be caused by a variety of reasons th at have nothing to do with a hardware defect, such as: cosmic radiation, electros tatic discharge, or software errors. FRU replacement should be considered only when a recurring prob lem exists.
Chapter 4 133 Post Codes These tables describe the POST code s and descriptions durin g the POST . Code Beeps POST Routine Description 02h V erify Real Mode 03h Disable Non-Maskable Interrupt (NMI) 04.
134 Chapter 4 45h POST device initialization 46h 2-1-2-3 Check ROM copyright notice 48h Check video con figuration agai nst CMOS 49h Initialize PCI bus and devices 4Ah Initialize all video adapters in.
Chapter 4 135 8Ah Initialize Extended BIOS Data Area 8Bh T est and initialize PS/2 mouse 8Ch Initialize floppy controller 8Fh Determine number of A T A drives (optional) 90h Initialize hard-disk contr.
136 Chapter 4 * If the BIOS detect s error 2C, 2E, or 30 (base 512K RAM error), it di splays an additional word-bitmap (xxxx) indicating the address line or bits that failed. For ex ample, "2C 0002" means addres s line 1 (bit one set) has failed.
Chapter 5 137 Jumper and Connector Locations Top View Item Description JL VDS1 LCD Connector JP14 Power/B Connector JSPK1 S peaker(Left) Connector JSPK2 S peaker(Right) Connector JKB1 Internal Keyboar.
138 Chapter 5 Bottom View ITEM DESCRIPTION PJP1 AC-IN Connector JRJ1 RJ45 Connector JC RT1 CRT Con n ec to r JP12 Fan Connector JUSB1 USB Connector JUSB2 USB Connector JMIC1 MIC-In Jack JHP1 Head-Phon.
Chapter 5 139 Power Board ITEM DESCRIPTION U1 Lid Switch SW1 TP Lock Button SW2 ON/OFF Button SW3 W ireless Button LED1 ON/OFF LED LED3 Media LED LED4 Num LED LED5 Wireless LED LED6 Caps LED LED7 TP L.
140 Chapter 5 Clearing Password Check and BIOS Recovery This section provides you with the st and ard operating procedures of clearing password and BIOS reco very for Aspire 5532. The machine provides one Hardware Open Gap on mai n board for clearing password check, and one Hotkey for enabling BIOS Recovery .
Chapter 5 141 BIOS Recovery by Crisis Disk BIOS Recovery Boot Block: BIOS Recovery Boot Block is a spec ial block of BIOS. It is used to boot up the system with minimum BIOS initialization. Users can enable this feature to restore the BIOS firmware to a successful one once the previous BIOS flashing process failed.
142 Chapter 5.
Chapter 6 143 FRU (Field Replaceable Unit) List This chapter gives you the FRU (F ield Repl aceable Unit) list ing in global configurations of Aspire 5532. Refer to this chapte r whenever ordering for parts to repair or fo r RMA (Return Merchan dise Authorization).
144 Chapte r 6 Aspire 5532 Exploded Diagrams Main Assembly 1 2 3 4 5.
Chapter 6 145 No. Description Acer P/N 1 Middle Cover Assy 60.PG T02.002 2 Hinge Cap Assy 42.N2802.001 3 Upper Case Assy 60.PG T02.001 4 Mainboard MB.PGY02.
146 Chapte r 6 Base Assembly No. Descriptio n Acer P/N 1 Fan 23.N2802.001 2 Thermal Module 60.N6502.001 3 Mainboard MB.PGY02.001 1 2 3.
Chapter 6 147 Rear Assembly No. Descriptio n Acer P/N 1 RAM Door 42.N2802.004 2 HDD Door 42.N2802.005 3 Lower Case 60.N2802.002 3 1 2.
148 Chapte r 6 Aspire 5532 FRU List CA TEGOR Y Description AcerPN Board POWER BOARD 55.N2802.001 WLAN CARD-XB6 3 NI.23600.007 WLAN CARD-BC M4312 NI.2 3600.029 Cable TP FFC 50.N2802.001 POWER CORD US 3 PIN 27.T A VV5.001 POWER CORD EU 3 PIN 27.T A VV5.
Chapter 6 149 LOWER CASE 60.N2802.002 TP BRACKET 33.N2802.001 MIDDLE COVER ASSY -AS 60.PG T02.002 HINGE CAP ASSY 42.N2802.001 UP CAP R-AS 42.PG T02.001 UP CAP L-AS 42.
150 Chapte r 6 HDD HDD SEAGA TE 2.5" 5400rpm 160GB ST9160310AS Crockett SA T A LF F/W:0303 KH.16001.034 HDD TOSHIBA 2.5" 5400rpm 160GB MK1655GSX Libra SA T A LF F/W : FG01 1J KH.16004.006 HDD HGST 2.5" 5400rpm 160GB HTS543216L9A300 Falcon-B SA T A LF F/W:C40C KH.
Chapter 6 151 ODD BEZEL-SUPER MU L TI 42.N2802.006 ODD BRACKET 33.N2802.003 Keyboard Keyboard ACER EM-7Tv2 HM51 Internal 17 S tandard 99KS Black US International T exture KB.I170A.140 Keyboard ACER EM-7Tv2 HM51 Internal 17 S tandard 99KS Black Greek T exture KB.
152 Chapte r 6 Keyboard ACER EM-7Tv2 HM51 Internal 17 S tandard 100KS Black Nordic T exture KB.I170A.129 Keyboard ACER EM-7Tv2 HM51 Internal 17 S tandard 100KS Black FR/ Arabic T exture KB.I170A.122 Keyboard ACER EM-7Tv2 HM51 Internal 17 S tandard 100KS Black US w/ Canadian French T exture KB.
Chapter 6 153 LCD CABLE FOR W/CCD F 50.N28 02.005 LCD BRACKET R&L FOR LC D 33.N2802.004 CAMERA 0.3 57.N2802.001 INVERTER 19.N2802.001 ANTENNA-MAIN+MIMO 50.N2802.004 LCD BEZEL FOR W/O CCD AS 60.PEE02.003 LED CABLE FOR W/O CCD F 50.N3202.001 Mainboard Mainboard AS5532 A TI R S780 SB710 8132 W /O 1394 V1.
154 Chapte r 6 Speaker SPEAKER R 23.N2802.002 SPEAKER L 23.N2802.003 Miscellaneous NAME PLA TE-AS5532 40.PGX02.002 Description AcerPN Screw List SCREW M2.48D 4.0L K 5. 5D 0.8T ZKNL 86.N2802.001 SCREW M2.48D 6.0L K 5. 5D 0.8T ZKNL 86.N2802.002 SCREW M2.
Chapter 6 155.
Appendix A 156 Model Definition and Configuration Model RO Country Acer Part No Description CPU AS5332- 903G16Mn EMEA Denmark LX.PGV02.009 AS 5332-903 G16Mn W7HP64A TDK2 MC UMACbs2 2G+1G/160/6L2.2/ 5R/CB_bgn_0.3D_HG_ENS1 CM900 AS5332- 903G16Mn EMEA Hol land LX.
157 Appendix A AS5332- 302G25Mn P A Chile LX.PGV08.00 6 AS5332-302G2 5Mn EM W7ST32EMA TCL3 MC UMACbs2 2*1G/250/6L2.2/5R/ CB_bgn_0.3D_HG_ES51 CMT3000 AS5332- 302G25Mn PA A C L A - S panish LX.PGV08.005 AS5332-302G2 5Mn EM W7ST32EMA TEA4 MC UMACbs2 2*1G/250/6L2.
Appendix A 158 AS5332- 304G32Mn EMEA UK LX.PGV02.045 AS5332-304G32Mn W7HP64A TGB1 MC UMACbs2 2*2G/320/6L2.2/5R/ CB_bgn_0.3D_HG_EN1 1 CMT3000 AS5332- 902G16Mn EMEA Midd le East LX.PGV0C.01 1 AS5332-902G16Mn LINPUSAME2 UMACbs2 1*2G/160/6L2.2/5R/ CB_bgn_0.
159 Appendix A AS5332- 903G16Mn EMEA Sp ain LX.P GV02.010 AS 5332-903G1 6Mn W7HP64A TES1 MC UMACbs2 2G+1G/160/6L2.2/ 5R/CB_bgn_0.3D_HG_ES51 CM900 AS5332- 903G16Mn EMEA Eastern Europe LX.PGV02.013 AS5332-903G1 6Mn W7HP64A TEU5 MC UMACbs2 2G+1G/160/6L2.
Appendix A 160 AS5332- 903G16Mn EMEA South Afri ca LX.PGV02. 039 AS5332-903G16Mn EM W7HP64EMA TZA4 MC UMACbs2 2G+1G/160/6L2.2/5R/ CB_bgn_0.3D_HG_ES61 CM900 AS5332- 903G16Mn EMEA Eastern Europe LX.PGV02.020 AS5332-903G1 6Mn W7HP64A TEU7 MC UMACbs2 2G+1G/160/6L2.
161 Appendix A AS5332- 903G32Mn EMEA Eastern Europe LX.PGV0C.010 AS5332-903 G32Mn LINPUSAEU7 UMACbs2 2G+1G/320/6L2.2/5R/ CB_bgn_0.3D_HG_ENQ1 CM900 AS5332- 902G16Mn EMEA Midd le East LX.PGV0Y .004 AS5332-902 G16Mn EM VHB32A TME2 MC UMACbs2 1*2G/ 160/6L2.
Appendix A 162 AS5332- 303G16Mn EMEA UK LX.PGW02.002 AS5332-303G16Mn W7HP64A TGB1 MC UMAbs2 2G+1G/160/6L2.2/5R/ CB_bgn_HG_EN1 1 CMT3000 AS5332- 303G50Mn EMEA UK LX.PGW02.004 AS5332-303G50Mn W7HP64A TGB1 MC UMAbs2 2G+1G/500_L/6L2.2/5 R/ CB_bgn_HG_EN1 1 CMT3000 AS5332- 903G25Mn EMEA UK LX.
163 Appendix A AS5332-903G16Mi N15.6WXG AG UMA N SO2GBII6 SO1GBII6 AS5332-902G16Mn N15.6WXGAG UMA N SO2GBII6 N AS5332-903G16Mn N15.6WXG AG UMA N SO2GBII6 SO1GBII6 AS5332-304G32Mn N15.6WXG AG UMA N SO2GBII6 SO2GBII6 AS5332-902G16Mn N15.6WXGAG UMA N SO2GBII6 N AS5332-901G16Mn N15.
Appendix A 164 AS5332-903G16Mn N15.6WXG AG UMA N SO2GBII6 SO1GBII6 AS5332-903G16Mn N15.6WXG AG UMA N SO2GBII6 SO1GBII6 AS5332-903G16Mn N15.6WXG AG UMA N SO2GBII6 SO1GBII6 AS5332-903G16Mn N15.6WXG AG UMA N SO2GBII6 SO1GBII6 AS5332-903G16Mn N15.6WXG AG UMA N SO2GBII6 SO1GBII6 AS5332-903G32Mn N15.
165 Appendix A AS5332-302G25Mn N25 0GB5.4KS N NSM8XS N AS5332-302G25Mn N25 0GB5.4KS N NSM8XS N AS5332-302G25Mn N25 0GB5.4KS N NSM8XS N AS5332-302G25Mn N25 0GB5.4KS N NSM8XS N AS5332-302G25Mn N25 0GB5.4KS N NSM8XS N AS5332-302G25Mn N25 0GB5.4KS N NSM8XS N AS5332-902G25Mn N25 0GB5.
Appendix A 166 AS5332-903G16Mn N16 0GB5.4KS N NSM8XS N AS5332-903G16Mn N16 0GB5.4KS N NSM8XS N AS5332-903G16Mn N16 0GB5.4KS N NSM8XS N AS5332-903G16Mn N16 0GB5.4KS N NSM8XS N AS5332-903G16Mn N16 0GB5.4KS N NSM8XS N AS5332-903G16Mn N16 0GB5.4KS N NSM8XS N AS5332-903G16Mn N16 0GB5.
167 Appendix A AS5332-302G25Mn N 5 in 1-Build in 3rd WiFi 1x2 BGN N AS5332-302G25Mn N 5 in 1-Build in 3rd WiFi 1x2 BGN N AS5332-302G25Mn N 5 in 1-Build in 3rd WiFi 1x2 BGN N AS5332-302G25Mn N 5 in 1-B.
Appendix A 168 AS5332-903G16Mn McAfee 5 in 1-Build in 3rd WiFi 1x2 BGN N AS5332-903G16Mn McAfee 5 in 1-Build in 3rd WiFi 1x2 BGN N AS5332-903G16Mn McAfee 5 in 1-Build in 3rd WiFi 1x2 BGN N AS5332-903G.
169 Appendix A AS5332-903G25Mn McAfee 5 in 1-Build in 3rd WiFi 1x2 BGN N AS5332-303G16Mn McAfee 5 in 1-Build in 3rd WiFi 1x2 BGN N AS5332-304G32Mn McAfee 5 in 1-Build in 3rd WiFi 1x2 BGN N AS5332-572G.
Appendix A 170.
Appendix B 171 Test Compatible Components This computer ’s compat ibility is tested and verified by Acer ’s internal testing department. All of its system functions are tested under Windows ® Vista and Windows ® 7 environments. Refer to the following lists for components, adapter ca rds, and peripherals which have passed these tests.
172 Appendix B Microsoft ® Windows ® OS Environment Test V end or Ty p e Descr iption Adapter DEL T A 65W Adapter DEL T A 65W 19V 1.7x5.5x1 1 Y ellow ADP-65JH DB A, L V5 LED LF LITE-ON 65W Adapter LITE-ON 65W 19V 1.7x5.5x1 1 Y ello w P A-1650- 22AC L V5 LED LF HIPRO 65W Adapter HIPRO 65W 19V 1.
Appendix B 173 SIMPLO 6CELL2.2 Battery SIMPLO AS-2009A Li-Ion 3S2P LGC 6 cell 4400mAh Main COMMON LGC 2.2Ah(S3 ) SIMPLO 6CELL2.2 Battery SIMPLO AS-20 09A Li-Ion 3S2P SAMSUNG 6 cell 4400mAh Main COMMON SDI 2.2Ah(F ) SANYO 6CELL2.2 Battery SANYO AS-2 009A Li-Ion 3S2P SANYO 6 cell 4400mAh Main C OMMON 2.
174 Appendix B P ANASONIC 6CELL2.2 Battery P ANASONIC AS-2009A Li-Ion 3S2P P ANASONIC 6 cell 4400mAh Main COMMON 2.2Ah(CG ) SAMSUNG 6CELL2.2 Battery SAMSUNG AS-2 009A Li-Ion 3S2P SAMSUNG 6 cell 4400mAh Main C OMMON 2.2Ah(F) SIMPLO 6CELL2.2 Battery SIMPLO AS-20 09A Li-Ion 3S2P P ANASONIC 6 cell 4400mAh Main COMMON Panasonic 2.
Appendix B 175 INTEL PMDT4300 C PU Intel Pentium Dual-Core T4300 PGA 2.1G 1M 800 R-0 INTEL PMDT4400 C PU Intel Pentium Dual-Core T4400 2.2G 1M 800 INTEL PMDT4200 C PU Intel Pentium Dual-Core T4200 PGA 2.0G 1M 800 35W R-0 no VT INTEL PMDT4300 C PU Intel Pentium Dual-Core T4300 PGA 2.
176 Appendix B HGST N160GB5.4KS HDD HGST 2.5" 5400rp m 160GB HTS543216L9A300 Falcon-B SA T A LF F/W:C40C HGST N160GB5.4KS HDD HGST 2.5" 5400rp m 160GB HTS545016B9A300 Panther B SA T A LF F/W:C60F WD N160GB5.4KS HDD WD 2.5" 5400rpm 160GB WD1600BEVT -22ZCTO ML160 SA T A LF F/W:1 1.
Appendix B 177 SEAGA TE N3 20GB5.4KS HDD SEAGA TE 2.5" 5400rpm 320GB ST9320320AS Crockett SA T A LF F/W:0303 TOSHIBA N320GB5.4KS HDD TOSHIBA 2.5" 5400rpm 320GB MK3255GSX Lib ra SA T A LF F/W:FG01 1J HGST N320GB5.4KS HDD HGST 2.5" 5400rp m 320GB HTS545032B9A300 Panther B SA T A LF F/W: C60F WD N320GB5.
178 Appendix B TOSHIBA N160GB5.4KS HDD TOSHIBA 2.5" 5400rpm 160GB MK1655GSX Lib ra SA T A LF F/W: FG01 1J HGST N160GB5.4KS HDD HGST 2.5" 5400rp m 160GB HTS543216L9A300 Falcon-B SA T A LF F/W:C40C HGST N160GB5.4KS HDD HGST 2.5" 5400rp m 160GB HTS545016B9A300 Panther B SA T A LF F/W:C60F WD N160GB5.
Appendix B 179 WD N250GB5.4KS HDD WD 2.5" 5400rpm 250GB WD2500BEVT -22ZCT0 ML160 SA T A LF F/W:1 1.01A1 1 SEAGA TE N3 20GB5.4KS HDD SEAGA TE 2.5" 5400rpm 320GB ST9320320AS Crockett SA T A LF F/W:0303 TOSHIBA N320GB5.4KS HDD TOSHIBA 2.5" 5400rpm 320GB MK3255GSX Lib ra SA T A LF F/W:FG01 1J HGST N320GB5.
180 Appendix B AUO N15.6WXGAG CCFL LCD AUO 15.6"W WXGA Glare B156XW01 V0 1A LF 220nit 8ms 500:1 SAMSUNG N15.6WXGAG CCFL LCD SAMSUNG 15.6"W WXGA Glar e L TN156A T01- A01 LF 220nit 8ms 600:1 LPL N15.6WXGAG CCFL LCD L PL 15.6" WXGA Glare LP156W H1-TLA1 LF 220nit 8ms 400:1 LPL N15.
Appendix B 181 HYNIX SO2GBII6 Memo ry HYNIX SO-DIMM DDRII 667 2GB HMP125S6EFR8C-Y5 LF 128*8 0.055u m NANY A SO1GBII6 Memory NANY A SO-DIMM DDRII 667 1GB NT1G T64UH8D0F N-3C LF 64*16 0.07um MICRON SO1GBII6 Memory MICR ON SO-DIMM DDRII 667 1GB MT8HTF12864HDY -667G1 LF 64*16 0.
182 Appendix B NANY A SO1GBII6 Memory NANY A SO-DIMM DDRII 667 1GB NT1G T64UH8D0F N-3C LF 64*16 0.07um MICRON SO1GBII6 Memory MICR ON SO-DIMM DDRII 667 1GB MT8HTF12864HDY -667G1 LF 64*16 0.065um SAMSUNG SO1GBII6 Memory SAMS UNG SO-DIMM DDRII 667 1GB M470T2864EH3-CE6 LF 64*16 0.
Appendix B 183 HLDS NSM8XS ODD HLDS Super-Multi DRIVE 12.7mm Tray DL 8X G T20N LF W/O bezel SA T A SONY NSM8XS ODD SONY Super-Multi DRIVE 12.7mm T ray DL 8X AD- 7580S LF W/O bezel SA T A PLDS NSM8XS ODD PLDS Super-Multi DRIVE 12.7mm Tray DL 8X DS- 8A3S LF W/O bezel SA T A P ANASONIC NSM8XS O DD P ANASONIC Super -Multi DRIVE 12.
184 Appendix B AMD M92XT AMD M92XT 55nm 23mm*23mm S2 package AMD M92XT AMD M92XT 55nm 23mm*23mm S2 package None UMA UMA (Intel ) None UMA UMA (Intel ) VRAM 512M- DDR2(64*16*4) 512M-DDR2 64*16*4 512M- .
Appendix B 185 WNC PIF A PIF A WNC PIF A PIF A WNC PIF A PIF A WNC PIF A PIF A WNC PIF A PIF A Audio Codec Realtek ALC272X Realtek Audi o Codec ALC272X Realtek ALC272X Realtek Audi o Codec ALC272X Rea.
186 Appendix B McAfee An tivirus application McAfee McAfee An tivirus application McAfee McAfee An tivirus application McAfee Wireless LAN Foxconn 3rd W iFi 1x2 BGN Foxconn Wireless LAN Athe ros HB93 .
Appendix C 187 Online Support Information This section describe s online techni cal support servic es available to hel p you repair your Acer Systems. If you are a distributor , dealer , ASP or TPM, please re fer your technical queries to your local Acer branch office.
188 Appendix C.
189 A AFLASH Utility 31 Antennas Removing 84 Replacing 87 B Battery Replacing 117 Battery Pack Removing 42 BIOS ROM type 17 vendor 17 Version 17 BIOS Utility 23–31 Boot 29 Exit 30 Navigating 23 Onbo.
190 Removing 78 Replacing 93 LCD Brackets Removing 82 Replacing 90 LCD Cable Replacing 90 LCD Failure 123 LCD Module Removing 55 Replacing 106 LCD Module Disassembly Flowchart 77 LCD Module Reassembly.
191 T ouchPad Br acket Removing 68 Replacing 98 T ouchPad Failure 124 T roublesho oting Built-in KB Failure 123 EasyTouch Buttons 130 HDTV Switch 131 Internal Speakers 124 LCD Failure 123 No Display 1.
192.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Acer KB.I170A.127 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Acer KB.I170A.127 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Acer KB.I170A.127, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Acer KB.I170A.127 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Acer KB.I170A.127, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Acer KB.I170A.127.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Acer KB.I170A.127. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Acer KB.I170A.127 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
