Manuel d'utilisation / d'entretien du produit TCP300 Series du fabricant Star Micronics
Aller à la page of 16
THERMAL RE-WRIT ABLE CARD READER / WRITER T CP300 SERIES • User ’ s Manual • This ‘User ’s Manual’ describes important information to enable you to use the reader/writer safely . Carefully read this manual before using the reader/writer and observe the descriptions herein.
Federal Communications Commission Radio Frequency Interfer ence Statement This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.
– 1 – 1. Precautions for Safe Use Carefully read and obey the following items to prevent injury to yourself or to others and to prevent damaging property . Precautions for Reader/Writer Setup 1. Setup the reader/writer in a solid, and level location.
– 2 – Precautions for Reader/Writer Use 1. Use only Star recommended cards. The reader/writer and the card may not operate normally if other cards are used. 2. Do not use cards that are dirty or oily or wet in any other manner . Also, do not handle cards with dirty or wet hands.
– 3 – 10. In case of reader/writer error (abnormal sounds, abnormal odors, smoke, fire) turn off the reader/writer immediately and unplug it from the power outlet. 1 1. Always hold the plug to unplug the power cord from its outlet. Pulling on the cord will damage the cord.
– 4 – 2. General Description The TCP300 series reader/writers are equipped with a thermal type display mechanism on a PET(Polyethyleneterephtalate) magnetic strip card reader/writer . They are con- nected to electrical devices such as POS and are used to print/erase characters and images freely onto the surface of cards.
– 5 – 3. Unpacking The following outlines the reader/writer and its accessories. The reader/writer (TCP300 Series) 1. Reader/writer 2. Cleaning cards (2 cards) 3.
– 6 – 4. External Appearance and Part Names The reader/writer (TCP300 Series) 1. Power Switch ............................ This turns the power to the reader/writer on and off. 2. Power Indicator Lamp .............. Indicates that reader/writer power is on.
– 7 – 5. Connect to and Setting External Devices 5-1 RS-232C Interface <Mounting the RS-232C Interface Cable> 1. Cut the power to the host computer and reader/writer . 2. Connect one end of the interface cable to the reader/writer and the other end to the host computer .
– 8 – <Settings for Communication Speed> T o change the serial communication settings, change the following DIP switch settings. (Ex-factory Default Settings: DSW 1 to 6 are ON, 7 and 8 are OFF .
– 9 – 5-2 USB Interface <Mounting the USB Interface Cable> 1. Connect one end of the interface cable to the reader/writer and the other end to the host computer .
– 10 – 6. Interface Board Replacement (RS-232C to USB) Replacement Procedures 1. T urn off the power switch. Then, unplug the power cord from the outlet. 2. Remove the two screws as shown in the figure below . 3. Pull the RS-232C interface board in the direction of the arrow to remove it.
– 11 – 7. Cleaning Cards A cleaning card is used to clean the transport rollers inside the unit. T wo cleaning cards accompany each unit. They are in the plastic wrap. 7-1 External Shape 7-2 Frequency of Use 1. Everyday , or once every 300 prints.
– 12 – 8. T roubleshooting • T rouble when T urning on the Power Symptom Possible Cause What to Do The power indicator Won’t accept The power plug is not Correct connect the power lamp does not light. cards. correctly connected. plug. Broken wire in power cord.
– 13 – • Removing Jammed Cards 1. T urn off the power and unplug the reader/writer . 2. Press the cover opener . 3. Lift the upper cover while the cover is open. 4. While pulling the mechanism’s snap lever (green), lift the mechanism. 5. Remove the card while the cover is open.
– 14 – 9. General Specifications Item Specifications Card Specification PET (Thin type card) Card T ransport Unit T ransport Method Rollers Card Insertion Direction One Direction Card T ravel Spee.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Star Micronics TCP300 Series c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Star Micronics TCP300 Series - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Star Micronics TCP300 Series, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Star Micronics TCP300 Series va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Star Micronics TCP300 Series, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Star Micronics TCP300 Series.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Star Micronics TCP300 Series. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Star Micronics TCP300 Series ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.