Manuel d'utilisation / d'entretien du produit 710 Series du fabricant Acer
Aller à la page of 135
700-e.book : 700-eCOP.fm Page i Tuesday, July 28, 1998 10:24 AM.
Copyright © 1998 Acer Incorpora ted All Rights Reser ved — Printed in T aiw an Changes may be made periodically to the infor mation in this publication without obligation to notify any person of such revision or changes. Such changes will be incorporated in new editions of this manual.
T able of Contents iii Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . v Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiii Connecting the Computer . . . . . . . . . . .
T able of Contents iv Traveling Internationally with the Computer . . . . . . 69 Chapter 5 Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71 System Software . . . . . . . . . . . . . . . . . . . . . . . . . . . 72 PhDISK . . . . .
v FCC Notice This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against har mful inter ference in a residential installation.
Notices vi Caution Changes or modifications not expressly approved by the manufacturer could void the user’s authority, which is granted by the Federal Communications Commission, to operate this computer . Use Conditions This part complies with Part 15 of the FCC Rules.
Notices vii Impor tant Safety Instr uctions 1. Read these instructions carefully. Save these instructions for future reference. 2. Follow all war nings and instructions marked on the product. 3. Unplug this product from the wall outlet before cleaning.
Notices viii 10. Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock.
Notices ix 15. Use only the proper type of power supply cord set (provided in your accessories box) for this unit. It should be a detachable type: UL listed/CSA certified, type SP T -2, rated 7A 125V minimum, VDE appr oved or its equivalent. Maximum length is 15 feet (4.
Notices x Laser Compliance Statement The CD-ROM drive in this computer is a laser product. The CD-ROM drive’s classification label (shown below) is located on the drive. CLASS 1 LASER PRODUCT CAUTION: INVISIBLE LASER RADIATION WHEN OPEN. A VOID EXPOSURE TO BEAM.
Notices xi Lithium Batter y Statement CAUTION Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer . Discard used batteries according to the manufacturer’s instructions.
Notices xii Y ear 2000 Compliance Statement The Extensa 700 series notebook computer is Y ear 2000- compliant and carries the “NSTL Hardware Tested Y ear 2000 Compliant” logo. This model has been tested both by Acer’s inter nal test labs and NSTL using NSTL’s YMARK2000 certification test.
xiii This manual describes features of the Extensa 700/710 Series notebook computers. The Extensa series computers incorporate such features as CardBus, PCI-based 16-bit stereo audio, Fast Infrared, inter nal pointing device, Universal Serial Bus, and all-in-one media storage.
Preface xiv Connecting the Computer Connecting the computer is as easy as 1-2-3. 1. Slide out the battery compartment cover and insert the battery pack into the battery compartment. Then slide the battery compartment cover in place. The battery pack has a pull loop at the end for easy remov al .
Preface xv 3. Slide the display cover latch to the left to open the display. Slide the power switch towards the rear of the computer then release it to tur n on the power . The POST (Power On Self-Test) routine executes and Windows begins loading. 700-e.
Preface xvi Note: To tur n off the power , press the power switch for more than four seconds. If you ar e using Windows 98 or Windows 95 operating system, we recommend that you use the Shutdown command to tur n off the computer . If you tur n off the computer and want to turn it on again, wait at least two seconds before powering up.
Preface xvii Getting Help Online This user’s guide provides clear and concise infor mation about the computer , so read it thoroughly. T o provide you with help when traveling, the computer also has a comprehensive online help. Accessing Online Help Follow these steps to access the online documentation: 1.
Preface xviii Suppor t Inf orma tion Y our computer is backed by an Inter national T raveler’s W arranty (ITW) that gives you security and peace of mind when traveling. Our worldwide network of service centers are there to give you a helping hand. An ITW passport comes with your computer .
Preface xix Care and Maintenance T aking Care of Y our Computer Y our computer will serve you well if you take care of it. ❑ Do not expose the computer to direct sunlight. Do not place near sources of heat, such as a radiator . ❑ Do not expose the computer to temperatures below 0ºC (32ºF) or above 50ºC (122ºF).
Preface xx ❑ The total ampere ratings of the equipment plugged in should not exceed the ampere rating of the cord if you are using an extension cord. Also, the total current rating of all equipment plugged into a single wall outlet should not exceed the fuse rating.
1 This computer combines high-per for mance, versatility, power management features and multimedia capabilities with a unique style and ergonomic design. W ork with unmatched productivity and reliability with your new power computing partner . This chapter gives an in-depth "tour" of the computer’s many features.
2 User’s Guide Securing your Computer . . . . . . . . . . . . . . . . . . . . . 29 Security Notch . . . . . . . . . . . . . . . . . . . . . . . . . 29 Passwords .
Fea tu r e s Chapter 1 Getting Familiar with y our Computer 3 Fea tu r e s This computer was designed with the user in mind. Here are just a few of its many features: Perf or mance ❑ Intel Pentium®.
Fe a t u r e s 4 User’s Guide Human-centric Design and Ergonomics ❑ Lightweight and slim ❑ Sleek, smooth and stylish design ❑ Full-sized keyboard ❑ Wide and curved palm rest ❑ Ergonomicall.
Display Chapter 1 Getting Familiar with y our Computer 5 Display The large graphics display of fers excellent viewing, display quality and desktop per for mance graphics. The computer supports two dif ferent display configurations — Super Clear Color (SCC) or Thin-Film T ransistor (TF T).
Display 6 User’s Guide Opening and Closing the Display To open the display, slide the display cover latch to the left and lift up the cover . Then tilt it to a comfortable viewing position.
Indicator s Chapter 1 Getting Familiar with y our Computer 7 Indicator s The computer has six easy-to-read status indicators (LEDs) under the display screen. The Power and Standby indicators are visible even when you close the display cover so you can see the status of the computer while the cover is closed.
Indicator s 8 User’s Guide Caps Lock Lights when Ca ps Lock is activ ated Num Lock Lights when Numer ic Lock is activ ated Icon Function Description 700-e.
K e yboard Chapter 1 Getting Familiar with y our Computer 9 K eyboar d The keyboard has full-sized keys and an embedded keypad, separate cursor keys, two Windows 98/W indows 95 keys and twelve function keys. Special K eys Lock K eys The keyboard has three lock keys which you can toggle on and of f.
Ke y b o a r d 10 User’s Guide Embedded Numeric Ke ypad The embedded numeric keypad functions like a desktop numeric keypad. It is indicated by small characters located on the upper right cor ner of the keycaps. To simplify the keyboard legend, cursor -control key symbols are not printed on the keys.
K e yboard Chapter 1 Getting Familiar with y our Computer 11 Windo ws 98/Windo ws 95 K eys The keyboard has two keys that per for m Windows 98-/ Windows 95-specific functions. Key Descr iption Windows logo ke y Start button. Combinations with this key perf orms special functions .
Ke y b o a r d 12 User’s Guide Hot K eys The computer employs hot keys or key combinations to access most of the computer’s controls like screen contrast and brightness, volume output and the BIOS setup utility. Hot Ke y Icon Function Description Fn-F1 Hot ke y help Displays a list of the hotke ys and their functions.
K e yboard Chapter 1 Getting Familiar with y our Computer 13 Fn-F4 Hibernation Puts the computer in Hiberna tion mode (if PHDISK, the hibernation utility , is installed, valid and enabled). Press the power switch to resume. Otherwise, the computer enters Standby mode.
Ke y b o a r d 14 User’s Guide Activ ating Hot K eys When activating hot keys, press and hold the first key Fn before pressing the other key in the hot key combination. Fn- → Brightness up Increases the screen brightness . Fn- ← Brightness down Decreases the screen brightness .
K e yboard Chapter 1 Getting Familiar with y our Computer 15 K eyboard Ergonomics Located below the keyboard, the wide and curved palm rest is ergonomically designed to provide you with a very comfortable place to rest your hands while you type. 700-e.
T ouchpad 16 User’s Guide T ouchpad The built-in touchpad is a PS/2-compatible pointing device that senses movement on its sur face. This means the cursor responds as you move your finger on the sur face of the touchpad. The central location on the palm rest provides optimum comfort and support.
T ouchpad Chapter 1 Getting Familiar with y our Computer 17 Function Left Button Right Button Ta p Execution Click twice quic kly T ap twice (at the same speed as double- clicking the mouse button) Se.
Storage 18 User’s Guide Storage This computer supplies you with all-in-one media storage: ❑ High-capacity Enhanced-IDE hard disk ❑ Standard ultra-slim inter nal 3.
Storage Chapter 1 Getting Familiar with y our Computer 19 Ejecting the CD-ROM Tray To eject the CD-ROM drive tray when the computer is tur ned on, press the CD-ROM eject button.
Storage 20 User’s Guide 4. Insert a module into the media bay until it clicks in place. 700-e.book : 700-1e.fm Page 20 Tuesday, July 28, 1998 10:24 AM.
Por t s Chapter 1 Getting Familiar with y our Computer 21 Por t s Ports allow you to connect peripheral devices to your computer as you would with a desktop PC. Left Ports Note: See Chapter 3 on how to connect exter nal devices to the computer . Icon Por t Connects to.
Por t s 22 User’s Guide S-Video Y ou can connect a television set with a s-video input jack to the computer , useful for large audience presentations and entertainment. Fast Infrared The computer’s fast infrared (FIR) port allows you to do wireless data transfer with other IR-aware computers and peripherals such as infrared printers.
Por t s Chapter 1 Getting Familiar with y our Computer 23 Rear P orts Icon Por t Connects to... Speaker -out jack Speake rs or headphones Line-in/ Microphone- in jack Audio line-in de vice with a 3.5mm minijack (e.g., condenser microphone, audio CD play er , stereo walkm an).
Por t s 24 User’s Guide Fax/Data Modem The computer has a built-in fax/data modem. To use the fax/data modem port, connect a phone cable from the modem port to a telephone jack. Start your communications software program. See your communications manual for instructions.
Por t s Chapter 1 Getting Familiar with y our Computer 25 Right Ports PC Card Slots There are two type II/I or one type III CardBus PC Card slots found on the right panel of the computer . These slots accept credit-card-sized cards that enhance the usability and expandability of the computer .
Por t s 26 User’s Guide Inserting a Card Insert the card into the desired slot and make the proper connections (e.g., network cable), if necessary. See your card manual for details. For type III cards, insert the card into the lower slot. Ejecting a Card Before ejecting a PC card: ❑ Exit the application using the card.
Por t s Chapter 1 Getting Familiar with y our Computer 27 Then press the slot eject button to eject the card. Bottom P or t Icon Por t Connects to... Mini docking connector Mini docking station Docking Connector 700-e.
A udio 28 User’s Guide A udio The standard computer configuration includes 16-bit high- fidelity stereo audio with further enhancements that include 3D sound for true audio immersion. Dual speakers located on each side of the display hinge direct sound towards to further enhance sound output.
Secur ing y our Computer Chapter 1 Getting Familiar with y our Computer 29 Secur ing y our Computer Security features include hardware and software locks — a security notch and a two-level password scheme.
Secur ing y our Computer 30 User’s Guide Setting a Password Y ou can set the password using: ❑ Notebook Manager -- go to page 78. ❑ Setup Utility -- go to page 92. Important: Do not forget your password! If you forget your password, you need to contact your dealer .
31 The computer operates on AC or battery power . This chapter contains the infor mation you need to know to operate the computer on battery power . It also includes infor mation on how your computer manages and saves power . Contents Battery Pack . .
Batter y P ack 32 User’s Guide Batter y P a c k The computer uses a battery pack that gives you long use between charges. Batter y P ac k Characteri stics The battery pack has the following characte.
Batter y P ack Chapter 2 Operating on Ba tter y Pow er 33 3. Disconnect the adapter to use up the battery before recharging again. Y ou only need to do this once with a new battery or with a battery that's been stored without being used for a long time.
Batter y P ack 34 User’s Guide 2. Insert the battery pack into the battery bay. 3. Replace the battery bay cover . To remove the battery pack, remove the battery bay cover; then pull out the battery pack using the pull loop.
Batter y P ack Chapter 2 Operating on Ba tter y Pow er 35 ❑ Charge-in-use mode When the computer is in use with the AC adapter plugged in, the computer also charges the battery pack if installed. This mode will take longer to fully charge a battery than rapid mode.
Batter y P ack 36 User’s Guide Optimizing Batter y Life This section helps you get the most out of battery operation. Optimizing battery life prolongs the charge/recharge cycle and improves recharge ef ficiency. Follow these suggestions to optimize and maximize battery power: ❑ Purchase an extra battery pack.
Batter y P ack Chapter 2 Operating on Ba tter y Pow er 37 Batter y-low W arning Y ou never have to worry about battery power as long as you are using the AC adapter . However , when you operate the computer on battery power , pay extra attention to the war ning beeps and the power indicator on the display panel.
Batter y P ack 38 User’s Guide The following table shows the recommended course of action to take when you encounter a battery-low condition. Situation Recommended Action AC a d a p t er and pow er outlet a v ailable 1. Connect the A C adapter to the computer .
Heuristic Po w er Management Chapter 2 Operating on Ba tter y Pow er 39 Heur istic P o w er Management This computer has a built-in heuristic power management unit that monitors system activity.
Heur istic P o w er Management 40 User’s Guide P ow er Management Modes Display Standby Mode Screen activity is deter mined by the keyboard, the built-in touchpad, and an exter nal PS/2 pointing device.
Heuristic Po w er Management Chapter 2 Operating on Ba tter y Pow er 41 There is one necessary condition for the computer to enter Standby mode: ❑ Heuristic Power Management must be set to [ENABLED].
Heur istic P o w er Management 42 User’s Guide ❑ Experience an incoming PC card modem event Hiber nation Mode In Hiber nation mode, all power shuts of f (the computer does not consume any power). The computer saves all system infor mation onto the hard disk before it enters Hiber nation mode.
Heuristic Po w er Management Chapter 2 Operating on Ba tter y Pow er 43 To exit Hiber nation mode, pr ess the power switch. The computer also resumes from Hiber nation mode if the resume timer is set and matched. The computer also resumes via the network if the W ake On LAN parameter is enabled.
Heur istic P o w er Management 44 User’s Guide Adv anced Pow er Management This computer supports the APM standard designed to further reduce power consumption.
45 Y our computer of fers excellent expansion capabilities with its built-in ports and connectors. This chapter describes how to connect peripherals and hardware options that help you use your computer with ease. When connecting peripherals, read the manual included with the peripheral for operating instructions.
Exter nal Monitor 46 User’s Guide Exter nal Monitor To show graphical ef fects on a larger display, connect an exter nal monitor to the CR T port. Read the monitor manual for additional instructions. Y ou can also choose to connect other output display devices to the computer via its S-video output jack.
Exter nal K eyboar d Chapter 3 Peripherals and Options 47 Exter nal K eyboard This computer has a keyboard with full-sized keys and an embedded keypad. If you feel more comfortable using a desktop keyboard, you can install a PS/2-compatible exter nal keyboard.
Exter nal K eypad 48 User’s Guide Exter nal K eypad Y ou can also use a 17-key numeric keypad for number - sensitive data entry applications. To connect the keypad, plug the keypad connector into the PS/2 port.
Exter nal P ointing De vice Chapter 3 Peripherals and Options 49 Exter nal P ointing De vice This computer accepts either a PS/2-compatible or serial mouse or similar pointing device. External PS/2 Mouse The built-in touchpad works alter nately with an exter nal PS/2 mouse which is hot-pluggable.
Exter nal Pointing De vice 50 User’s Guide Exter nal Serial Mouse If you use a serial mouse, plug it into the serial port. To enable the serial mouse, use the Add New Hardware tool in the Windows 98/W indows 95 Control Panel.
Pr inter Chapter 3 Peripherals and Options 51 Pr inter This computer supports both serial and parallel printers. For a serial printer , plug the printer cable into a serial port. For a parallel printer , plug the printer cable into the parallel port. See your printer manual for operating instructions.
A udio De vices 52 User’s Guide A udio De vices Audio devices are easy to connect with the audio ports accessible from the left rear side of the computer . Y ou can plug in an exter nal microphone or audio line-in device to the line-in/microphone-in jack.
Mini Docking Station Chapter 3 Peripherals and Options 53 Mini Doc king Station For one-step connection and disconnection from your peripherals, use the optional full-featured port replicator . This port replicator includes all the ports on your computer and adds a few more.
PC Cards 54 User’s Guide PC Cards The computer has two CardBus PC card slots that accommodate two type I/II or one type III PC card(s). Please consult your dealer for PC card options available that you can purchase for your computer . 700-e.book : 700-3e.
USB De vices Chapter 3 Peripherals and Options 55 USB De vices The computer has a USB (Universal Serial Bus) port that allows you to connect peripherals without occupying too many resources.
Miscellaneous Options 56 User’s Guide Miscellaneous Options Additional P ow er Packs Y ou can order spare batteries and an AC adapter . Batter y Pac k It is good practice to have a spare battery around, especially when you travel. The Lithium-Ion battery, coupled with heuristic power management features, supplies you with more power on-the-go.
Miscellaneous Options Chapter 3 Peripherals and Options 57 Connect the single connector end of the Y-bridge cable to the computer’s PS/2 port and the double connector ends to the two PS/2 devices. File T ransfer Cable Besides using the infrared port, you can also transfer files between computers using a file transfer cable.
K ey Component Upgrades 58 User’s Guide K ey Component Upgrades Y our computer delivers superior power and per for mance. However , some users and the applications they use may demand more. This computer allows you to upgrade key components when you need increased per for mance.
K ey Component Upgrades Chapter 3 Peripherals and Options 59 Installing Memor y Follow these steps to install memory: 1. Tur n of f the computer , unplug the AC adapter (if connected) and remove the battery pack. Then tur n the computer over to access its base.
K ey Component Upgrades 60 User’s Guide 3. Insert the memory module diagonally into the slot, then gently press down until it clicks into place. 4. Replace the memory door and secure it with the screw. The computer automatically detects and reconfigures the total memory size.
K ey Component Upgrades Chapter 3 Peripherals and Options 61 Hard Disk Upgrade Y ou can upgrade your hard disk with a higher capacity drive when you need more storage space. The computer uses a 12.7mm or 9.5mm 2.5-inch Enhanced-IDE hard disk. Installing a Replacement Hard Disk Follow these steps to install a hard disk: 1.
K ey Component Upgrades 62 User’s Guide 3. Pull out the hard disk. 4. Insert a new hard disk module into the hard disk bay and tighten the coin-screw by tur ning it clockwise.
63 This chapter gives you tips and hints on things to consider when moving around or traveling with your computer . Contents Disconnecting from the Desktop . . . . . . . . . . . . . . . 64 Moving Around . . . . . . . . . . . . . . . . . . . . . . . . .
Disconnecting from the Desktop 64 User’s Guide Disconnecting from the Desktop Follow these steps to disconnect your computer from exter nal accessories: 1. Save your work in progress. 2. Shut down the operating system. 3. Tur n of f the computer . 4.
Mo ving Around Chapter 4 Moving with y our Computer 65 Mo ving Around when you are just moving within short distances, for example, from your office desk to a meeting r oom Preparing the Computer Before moving the computer , close and latch the display cover to place it in standby mode.
T aking the Computer Home 66 User’s Guide T aking the Computer Home when you are moving from your of fice to your home or vice versa Preparing the Computer After disconnecting the computer from your desktop, follow these steps to prepare the computer for the trip home: 1.
T aking the Computer Home Chapter 4 Moving with y our Computer 67 ❑ If you need to stop for an extended period of time and cannot bring the computer with you, leave the computer in the trunk of the car to avoid exposing the computer to excessive heat.
T rav eling with the Computer 68 User’s Guide T rav eling with the Computer when you are moving within a larger distance, for instance, from your office building to a client’s of fice building or traveling locally Preparing the Computer Prepare the computer as if you were taking it home.
T rav eling Inter na tionally with the Computer Chapter 4 Moving with y our Computer 69 T rav eling Inter nationally with the Computer when you are moving fr om country to country Preparing the Computer Prepare the computer as you would nor mally prepare it for traveling.
T rav eling Inter n ationally with the Computer 70 User’s Guide ❑ If you are using the modem, check if the modem and connector is compatible with the telecom system of the country you are traveling in.
71 This chapter discusses the important system utilities bundled with your computer . Contents System Software . . . . . . . . . . . . . . . . . . . . . . . . . . . 72 PhDISK. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 Notebook Manager .
System Softw are 72 User’s Guide System Softw are The computer comes preloaded with the following software: ❑ Windows 98, W indows 95 (or Windows NT) operating system ❑ DMI-compliant hardware BI.
PhDISK Chapter 5 Software 73 PhDISK The PhDISK utility allows your computer to enter hiber nation mode. Before entering hiber nation mode, your computer saves all necessary inforcomputer mation into a file or partition created by PhDISK, then shuts of f power to all system components.
Notebook Manager 74 User’s Guide Notebook Manager The computer has a built-in system setup program called Notebook Manager . The Windows 98-/W indows 95-based Notebook Manager allows you to set passwords, the startup sequence of the drives and power management settings.
Notebook Manager Chapter 5 Software 75 Information Vie wer Infor mation Viewer summarizes and lists information about the specifications and settings of the dif ferent components of your computer . Note: Items in this table may differ slightly fr om the ones onscreen.
Notebook Manager 76 User’s Guide The current version of the computer’s BIOS shows before the Device-Configuration table. Boot Sequence Boot Sequence defines the boot sequence to follow when your computer boots up. The Boot Sequence screen displays the bootable devices in your computer and the order in which the booting sequence will occur .
Notebook Manager Chapter 5 Software 77 ❑ Floppy Drive ❑ IDE Hard Drive ❑ CD-ROM Drive (or other bootable media bay module) Simply drag and drop the devices the change the booting order . Click on Apply to accept. Passw ord Password is used to set, modify or delete the password(s) for your computer .
Notebook Manager 78 User’s Guide Setting the Super visor Passw ord To set the Supervisor Password, follow these steps: 1. Click on the Change Supervisor Password button. The following dialog box displays: 2. Click on the Enable Supervisor Password checkbox.
Notebook Manager Chapter 5 Software 79 Setting the User Passw ord To set the User Password, follow these steps: 1. Click on the Change User Password button. 2. Click on the Enable User Password checkbox. 3. Click in the New Password textbox and type in up to seven alphanumeric characters (A-Z, a-z, 0-9) which you want to be your User Password.
Notebook Manager 80 User’s Guide P ow er Management Power Management is used to set various settings related to power management. This includes the following power -saving-related features: ❑ Enable Heuristic Power Management. Select to enable heuristic power management.
Notebook Manager Chapter 5 Software 81 ❑ Enable system resume timer . Select to allow the computer to wake-up from standby mode if the resume timer is set and matched. ❑ System Resume T imer . (When Enable system resume timer is selected) click on the button to set the System Resume T imer .
Notebook Manager 82 User’s Guide ❑ Brightness for LCD Panel/Contrast for LCD Panel. Click and drag to set the LCD screen brightness and contrast levels.
Setup Utility Chapter 5 Software 83 Setup Utility The Setup Utility is a hardware configuration program built into your computer’s BIOS (Basic Input/Ouput System). Y our computer is already pr operly configured and optimized, and you do not need to run this utility.
Setup Utility 84 User’s Guide Main The Main screen contains parameters involving basic computer settings and hardware infor mation. The following table describes the parameters in this screen. Settings in boldface are the default and suggested parameter settings.
Setup Utility Chapter 5 Software 85 Boot Device Prio rity Press Enter to access the Boot Device Priority submenu. Speaker Enables or disa bles the internal speaker s on boot- up. Y ou can override this b y toggling Fn-F8 during computer operation. Options: Enabled or Disabled Boot Display Device Sets the display on boot-up.
Setup Utility 86 User’s Guide Hard Disk 0 Submenu The hard disk 0 submenu allows you to set parameters related to your hard disk. Press Enter to access this submenu. The following table describes the parameters in this screen. Settings in boldface are the default and suggested parameter settings.
Setup Utility Chapter 5 Software 87 CD-ROM/AT API Devices Submenu The CD-ROM/ATAPI Devices submenu allows you to set parameters related to the module installed in the media bay. Press Enter to access this submenu. This screen resembles the Hard Disk submenu screen.
Setup Utility 88 User’s Guide Boot Device Priority Submenu The Boot Device Priority submenu allows you to set the boot sequence of the bootable devices in your computer . Press Enter to access this submenu. The computer boots-up using the sequence specified in this submenu.
Setup Utility Chapter 5 Software 89 Adv anced The Advanced screen contains parameters that are related to computer hardware. The following table describes the parameters in this screen. Settings in boldface are the default and suggested parameter settings.
Setup Utility 90 User’s Guide Security The Security screen contains parameters that help safeguard and protect your computer from unauthorized use. IrD A P ort Ena bles or disables the infrared port. Options: Enabled or Disabled Par allel P ort Enables or disa bles the parallel port.
Setup Utility Chapter 5 Software 91 The following table describes the parameters in this screen. Settings in boldface are the default and suggested parameter settings. Par am et er Descr iption User Passw ord is When set, this passw ord pr otects the computer and this Setup Utility from unauthorized entr y .
Setup Utility 92 User’s Guide Setting a Passw ord Follow these steps: 1. Use the ↑ and ↓ keys to highlight a Set Password parameter (Supervisor or User) and press the Enter key. The password box appears: 2. Type a password. The password may consist of up to seven characters (A-Z, a-z, 0-9).
Setup Utility Chapter 5 Software 93 The password box appears: 2. Press Enter twice without entering anything in the password box to remove the existing password. 3. Press Esc to go to the Exit menu. 4. Press Save Change & Exit to save the password and exit the Setup Utility.
Setup Utility 94 User’s Guide Parameter Description Heuristic P ow er Management Enables or disa bles heuristic power management. See “P ow er Management Modes” on page 40 f or more inf or mation on pow er management modes Options: Enabled or Disabled Display Always On When enabled, the computer display is always on.
Setup Utility Chapter 5 Software 95 Exit When you select the Exit menu or press Esc from any screen, the Exit options screen displays. The following table describes the parameters in this screen. W ake On LAN When enabled, the computer wakes up fr om standby mode if the computer is accessed through the netw or k.
Setup Utility 96 User’s Guide Get Def ault Va l u e s Resets all parameters to their f actor y-default val u e s . Load Previous Va l u e Disregards an y changes made in the current session and reloads their previous v alues . Sav e Changes Saves an y changes ma de.
97 This chapter instructs you on how to deal with common system problems. Read it before calling a technician if a problem occurs. Solutions to more serious problems require opening up the computer . Do not attempt to open the computer by yourself. Contact your dealer or an authorized service center for assistance.
Frequently-Ask ed Questions 98 User’s Guide Frequently-Ask ed Questions This is a list of possible situations that may arise during the use of your computer , and gives easy answers and solutions to these questions. I pressed the pow er switch and opened the display , but the computer does not star t or boot-up.
Frequently-Ask ed Questions Chapter 6 Tr oubleshooting 99 If pressing a key does not tur n the display back on, two things might be the cause: ❑ The contrast and/or brightness level might be too low. Press Fn- ↑ and Fn- ↓ to adjust the contrast level (only for models with SCC LCDs).
Frequently-Ask ed Questions 100 User’s Guide If headphones, earphones or exter nal speakers are connected to the line-out port on the computer’s rear panel, the inter nal speakers automatically tur n of f. External microphone or audio line-in device does not w ork.
Frequently-Ask ed Questions Chapter 6 Tr oubleshooting 101 The k eyboard does not respond. T ry attaching an exter nal keyboard to the PS/2 connector on the computer’s rear . If it works, contact your dealer or an authorized service center as the inter nal keyboard cable may be loose.
Frequently-Ask ed Questions 102 User’s Guide The infrared port does not work. Check the following: ❑ Make sure that the infrared ports of the two devices are facing each other (+/- 15 degrees) a maximum of 1 meter apart. ❑ Make sure there is a clear path between the two infrared ports.
Error Messages Chapter 6 Tr oubleshooting 103 Error Messages If you receive an error message, note the message and take the corrective action. The following table lists the error messages in alphabetical order together with the recommended course of action.
Error Messages 104 User’s Guide Insert system diskette and press <Enter> ke y to reboot Insert a system (boota ble) diskette in the f loppy drive (A:), then pr ess Enter to reboot. Ke yboard Error or No Ke yboard Connected Contact your dealer or an authorized ser vice center .
Error Messages Chapter 6 Tr oubleshooting 105 If you still encounter problems after going through the corrective measures, please contact your dealer or an authorized service center for assistance. Some problems may be solved using the BIOS Setup Utility.
106 User’s Guide 700-e.book : 700-6e.fm Page 106 Tuesday, July 28, 1998 10:24 AM.
107 This appendix lists the general specifications of your computer . Microprocessor Intel Mobile Module (IMM) with: ❑ Intel Pentium® II processor or Intel Pentium® processor with MMX™ technolog.
Specifications 108 User’s Guide Aud i o ❑ 16-bit stereo audio (PCI) ❑ 3-dimensional sound with built-in wavetable synthesizer ❑ Dual speakers ❑ Sound Blaster Pro- and Windows Sound System- c.
Specifi cations Appendix A Specifications 109 W eight and Dimensions ❑ 3.18 kg (7 lb) ❑ 308 x 251 x 45 mm (12.1 x 9.9 x 1.8 in) T emperature ❑ Operating: 10°C ~ 35°C ❑ Non-operating: -20°C .
Specifications 110 User’s Guide Options ❑ 16-/32-/64-MB SDRAM memory upgrade module ❑ Higher -capacity hard disk drive ❑ Media bay modules: DVD-ROM drive, LS-120 drive, 2nd hard disk ❑ PS/2 Y-cable ❑ Full-function mini docking station ❑ Additional AC adapter and battery pack 700-e.
Inde x Index 111 A AC adapter caring for ,x i x connecting ,x i v Advanced Power Management ,4 4 APM. See Advanced Power Management audio ,2 8 connecting externally ,5 2 controlling volume ,2 8 settin.
Inde x 112 User’s Guide turning on ,x v connections AC adapter ,x i v audio ,5 2 computer ,x i v file transfer cable ,5 7 keyboard, external ,4 7 keypad, external ,4 8 monitor ,4 6 mouse ,4 9 mouse,.
Inde x Index 113 resuming from ,4 3 utility ,7 3 hot keys ,1 2 HPM. See Heuristic Power Management I indicator lights ,7 infrared ,2 2 troubleshooting ,1 0 2 turning on and off ,9 0 ITW.
Inde x 114 User’s Guide P palm rest ,1 5 parallel port setting in Setup Utility ,9 0 password ,2 9 changing in Setup Utility ,9 2 checking during boot ,9 1 checking during resume ,9 1 removing in Se.
Inde x Index 115 serial mouse connecting ,5 0 serial port setting in Setup Utility ,8 9 service when to call ,x x Setup Utility , 83-96 Advanced menu ,8 9 Boot Device Priority submenu ,8 8 CD-ROM/ATAP.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Acer 710 Series c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Acer 710 Series - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Acer 710 Series, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Acer 710 Series va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Acer 710 Series, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Acer 710 Series.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Acer 710 Series. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Acer 710 Series ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
