Manuel d'utilisation / d'entretien du produit 911LT du fabricant Samsung
Aller à la page of 80
Install drivers Install p ro g rams !! !! SyncMaster 711LT/ 911LT.
Notation Failure t o follow di rections not ed by this symb ol could resu lt in bodily harm or dama ge to the equipment . Prohibited Important to read and understand at all times Do not disassem ble D.
Otherwise, this ma y result in electric shoc k or fire. Do not to uch the power plug with w et hands when re moving or pl ugging the plug into the outlet. Otherwise, this may result i n electric shoc k. Make sure to connect th e power cord to a g rounded power o utlet.
Installation Be sure to contact an authorized Service Cent er when in stalling yo ur monitor in a locati on with heav y dust, high o r low tempera tures, high humidit y, and exposed to chemical substances a nd where it oper ates for 24 ho urs such as at ai rports, t rain stations etc.
Put down the mon itor carefully. Failing to do so may da mage the m onitor. Do not place the front of the p roduct on the f loor. Otherwise, this may result i n damage to the screen display. Ensure that an authorized installation com pany installs the wall mo unt.
cleaner other th an the monitor cle aner, dilute it with water a t a ratio of 1:10 . When cleani ng the powe r plug pins or du sting the p ower outlet, clean it with a dry cloth. Otherwise, it may result in fire. When cleaning the p roduct, make sure to d isconnect the power cord.
Do not place thi s product in a l ocation ex po sed to m oisture, dust, smoke, wate r, or in a car. Otherwise, this ma y result in electric shock or fire. When you drop th e product or the case is broken , turn the powe r off and disc onnect the power cord.
If water or foreig n material en ters the product, disconne ct the power cord a nd contact a Service C enter . Otherwise, this ma y result in electric shock or fire.
If you do not use th e product for a long period of time, disconn ect the power c ord from the powe r outlet. Otherwise, thi s may result i n overheating o r fire due to d ust, and may result i n fire due to electric shock or le akage. Do not plac e any heavy item s or toys or confect ionery, such as cookies etc.
Be careful w hen adjust ing the angl e of the prod uct or the hei ght of the st and. This may resu lt in persona l injury a s your hand or fingers may becom e caught. Also, if you tilt the pro duct too far, it may fall and c ause personal injury. Do not instal l the product in a loca tion low enou gh for ch ildren to reac h.
conditio ns of the purcha se contract. Thi s product sh ould not be mixe d with other commercial wa stes for disposal..
Features Tuning the p ower off while booting up a Client may d amage the mon itor In addition , exit all running p rograms before turning the monito r off.
Please make s ure the follo wing items ar e included wit h your moni tor. If any items are missing , contac t your dealer . Contact a lo cal dealer to buy optional items.
MENU button [ ] Opens the OSD menu. Also use to exit the OSD menu o r return to the previous menu. MagicBri ght™ butto n [] MagicBright ™ is a new featu re providin g optimum viewing env ironment depending on th e contents o f the image you are watching.
mode -- An alog or Clien t input signal .) >> Click here to se e an animati on clip AUTO button Use this button for aut o adjustment. >> Click here to se e an animati on clip Power button [ ] Use this button for turn t he monitor on and off.
and turn it in th e locking direction ( ). 2. Connect t he Kensingt on Lock cable. 3. Fix the K ensington Loc k to a desk o r a heavy sta tionary object . Cable Fix Ri ng When conne cting the cabl e is finishe d, fix the cabl es to the Ca ble Fix Ring.
Connectin g Cables Connectin g Cables ( When used as a normal monitor ) Connect th e power cord for yo ur monitor to t he power port on th e back of the monitor. Plug the power cord for the m onitor into a nearby outlet. Use appr opriate connec tion for yo ur computer.
USB (USB Connec tion Terminal) Connect USB devices such as a m ouse, keyboard a nd external storage device s (DSC, MP3, ext ernal storage, etc.). LAN (LAN Connecti on Terminal) Connec t the LAN cab le. RS-232C Co nnection Termi nal Connect a RS-232 C cable to this te rminal.
You can easily ad just the positio n of the monit or screen from right to left using th e rotating stand. Ru bber stubs are attach ed at the botto m of the mo nitor to help fix it to the installatio n location. Usin g Other Stands Attachin g a Base This monitor a ccepts a 100 m m x 100 m m VESA-comp liant mounti ng interfac e pad.
mount the monito r at least 10cm awa y from the wall surfac e. z Contact the nearest Samsung Se rvice Center for more information. S amsung Elect ronics will not be responsibl e for damages c aused by usi ng a base other th an those spec ified. z Please use Wall Mount according to the International standards.
Intr oducti on Welcom e Congratulation s on purch asing on e of the Sams ung Linux -based Thin Cl ient mode ls. The Sams ung Thin Clients are compos ed of state-of -the-ar t hardware and an ope rating sys tem base d on the Samsung Fla sh Linux Tech nology.
PXE Network B oot Suppo rt Yes Yes SSH Yes Yes DHCP Yes Ye s DPMS Yes Ye s Screen Saver Yes Yes USB Mass Sto rage Yes Y es File Brow ser EmelFM2 EmelFM 2 Smart Card Supp ort Yes Yes Icewm 1.2.32 1.2.32 Thin Prin t Yes Yes Boot Pr oc edur e S y stem BIOS The BIOS look s for extens ions in the a ppropriate me mory area.
Contr ol C ente r ( Global Settin g s ) Star tin g the Control Cente r Once the STC boots u p, you hav e the option to set the S TC as p er your choice u sing the settings provided in the Control Pan el. The Co ntrol Pa nel can be accessed u sing two met hods.
Resolut ion It can be set to a ny o ne of the follow ing sc reen size. z 800 x 600 z 1024 x 768 z 1280 x 1024 Color It can be set to a ny one of the follow ing color dep ths. z 8 bit ( Low Color / 256 C olors) z 16 bit ( High Color / 65,535 C olors) z 24 bit ( True Color / 16.
Ke y board T y pe Choose your k eyboard type fro m the avai lable op tions from the drop box. Character Repeat In this sectio n you can set the au to repeat be havior for the ke yboard: z Repeat delay: - Sets the del ay time (in relative valu e) between pressing a key and the start of the auto rep eat mode.
z Session Name: - Enter the name for the sessio n to be saved o r load ed. z Load / Save / Delete: - For loading , saving or dele ting a sa ved ses sion from m emory. It is possibl e to select/crea te a new /existin g mo unt point us ing the Contro l Centre d ialog box es itself.
It is possibl e to select/crea te a new /existin g mo unt point us ing the Contro l Centre d ialog box es itself. The proce ss is de scribed here al ong with figu res. z First the IP add ress of the Samba serve r is give n. z It automatic ally lists all the dire ctories shared on that S amba serv er which can be seen as shown in the figure b elow.
ICA Glob al Settings Citrix® Independen t Comput ing Architec ture (ICA)® allows users to conne ct rem otely to servers running C itrix MetaFra me. ICA C lient offers qui ck, secu re access to a pplications , content, a nd entire desktops publish ed on servers run ning Meta Frame.
accessible on the netw ork and u sing the chos en brows ing protocol. TCP/IP If your network c onfigurati on uses routers or gateway s, or to elimin ate additi onal network traffic by th e broadcasts,.
and over again. Set the maxi mum size of lo cal sys tem memory (in kilobytes ) to be use d for cach ing and the minimum size of bitmaps to b e cached and the di rectory the files should be stored l ocally.
You can perfo rm bi-direc tional map ping between serial de vices th at are attached to the Thin Client (e.g. sc anners, s erial printe rs) and the Citrix Server's C OM ports. This enables programs runn ing on the server to excha nge data w ith the local devices.
PNA g ent This “PNAgen t” (Program N eighborho od Agent) pag e allows yo u to configure an d search for published app lication s by Metaframe s ervers.
This page a llows you to configu re how yo u want to connect to your Meta frame serve rs. However opti ons are self ex planatory . Session Options: The page is enabled only when th e you hav e select ed your Logon Me thod as " Prompt User" at Se rver page.
T his menu allows time setti ngs for the STC to be c onfigured. Th e availa ble option s to be se t are Date This menu section a llows you to configu re the d ate settings fo r the STC . The availabl e options are z Yea r: - Enter the year y ou want to s et the date t o.
A part from these options, there also is a Factory R eset optio n availa ble that is us ed to revers e any unnecessary c hanges b eing made by the us er knowingl y/unknowing ly. It repla ces the m ain settings and configuratio n files i n the system w ith the d efault files th at were pres ent at the time of install ing the OS.
password has to be prov ided. Upgrade Using NFS The firmware file is p resent in th e location sp ecified b y the N FS share addres s. No u sername or password is needed. The upgradin g process dis plays a warning m essage before starting the process.
z Automatic Logon : Select if yo u want to logon aut omatically. { User Name : Us er Name t o be used for co nnection. { Password : Pass word to be used for co nnecting to the system . { Doma in : Do main name in which the system is pr esent on th e network.
z Screen Size: - Size o f the window when c onnectio n is esta blished. z Color Depth: - Color depth to be us ed whil e connecting to the serv er. Input "View On ly" Spec ifies that no k eyboard or m ouse eve nts shou ld be sen t to the serv er.
Xter m X term is the te rminal us ed in ST C wherein w e can ex ecute local c ommands using a s hell. It is the basic busyb ox shell that i s used in the Xterm as the c ommand p rompt. The X -term can be used to perform all the fun ctionalit ies that w e can do from th e various applica tion GUIs.
fdisk Used for getting or altering partition ta ble inform ation free Displays the amount of free and us ed system m emory halt To halt/shutdow n the sy stem ifconfig To get IP inform ation for the sy.
command p rompt usin g the comm ands "shutdo wn" or " reboot", o r using the shutdown int erface as shown below . This in terface is acc essible using the start menu , mouse righ t click and from the power button of t he thin cl ient.
Monitor Driver When prompted by the operati ng system for t he monitor d river, insert th e CD-ROM included with this monitor. Driver insta llation is sl ightly differen t from one operati ng system to another. Follow the directions app ropriate for the operating s ystem you have.
This monitor driver i s under certifying MS lo go, and th is installation doesn't damag e your system. The certi fied driver wi ll be posted on Samsung Mon itor homepa ge http://www.
Click "Properties" in the "M onitor" tab. If th e "Properties" button is deactivated, it m eans the configura tion for your monitor is com pleted. The mo nitor can be us ed as is. If the messag e “Windows n eeds…” is dis played, as sh own in the figure belo w, click "Continue".
Select th e model that matches your m onitor from the list of monitor m odels on the screen, and click "Nex t". Click "Close" → "Clo se" → "OK" → "OK" o n the following screens displa yed in sequ ence.
Click "Disp lay" icon and ch oose the "Sett ings" tab then click "Advanced ." Click the "Prope rties" but ton on the "Moni tor" tab and se lect "Driver" tab. Click "Upd ate Driver." and se lect "Install from a list or.
list and click the "Next" bu tton. If you can see following "Mes sage" window, then click the "Con tinue Anyway" b utton. Then click the "OK" button. This monitor driver i s under certifying MS lo go, and th is installation doesn't damag e your system.
How to inst all Click "Start," "Setting," and then "C ontrol Pan el." Double click the "Displ ay" icon. Select th e "Settings" ta b and click the "Advanced Prop erties" butt on. Choose "Monitor.
Natural Color Natural Colo r One of the re cent problems in using a co mputer is that the color of th e images printe d out by a prin ter or other imag es scanned by a scanner o r a digita l camera are not the same as those sh own on the monitor. the Natural Color S/W is the very solu tion for this problem.
MagicTune™ execution ic on may no t appear depen ding on spec ification of computer system or monit or. If that ha ppens, press F5 Key . Installation Problems ( Ma g icTune™ ) The instal lation of M agicTune™ ca n be affected by such facto rs as the vi deo card, moth erboard and the network environment.
Control Buttons [ ] Opens the OSD menu. Also use to exit t he OSD menu or re turn to the previous menu. [ ] These buttons al low you to ad just items in the menu.
Menu Descript ion AUTO When the 'AUTO' button is pressed , the Auto Ad justment sc reen appears a s shown in the animated scree n on the ce nter.
In case of push ing MENU bu tton after lockin g OSD Menu Descript ion OSD Lock & Unlock This is the function th at locks the OSD in order to keep th e current states of settings or prevent ot hers from adju sting the curre nt setting s.
MagicBrigh t™ Push the Mag icBright™ button to circle thro ugh availa ble preconfig ured modes. - Six different modes (C ustom/Te xt/Interne t/Game/Sport/Mo vie) V olume Menu Descript ion Volume When OSD is not on the scr een, push [ ▲ / ] the button to ad just volume.
OSD Function Picture Brightness Contrast Color MagicColor Color Tone Color Control Gamma Image Coarse Fine Sharpness H-Position V-Position OSD Language H-Posi tion V-Position Transparen cy Display Tim.
Menu Description Play/Stop MagicColor MagicColo r is a new techno logy that Samsu ng has exclusiv ely developed to improve di gital image and to display n atural color more clearly wit hout disturbing image qua lity. Off Returns to the orig inal mode.
Color Tone ( Not available in MagicColor mod e of Full and Intelligent. ) MENU → , → → , → → , → MENU Color Control Adjusts in dividual Re d, Green, B lue color ba lance. - Red, Green, Bl ue ( Not available in MagicColor mod e of Full and Intelligent.
H-Position Changes the h orizontal po sition of the monitor's entire display. MENU → , → → , → → , → MENU A vailable in an alog Mode Onl y V-Position Changes the vertical po sition of t he monitor' s entire display.
Display Time turned off. - 5 Sec, 10 Sec, 20 S ec, 200 Sec MENU → , → → , → → , → MENU Setu p Menu Descripti on Play/Stop Image Res et Image parameters a re replaced with the fa ctory default values. MENU → , → → → , → MENU Color Reset Color para meters are repl aced with t he factory def ault values.
Menu Descript ion Information Shows a vide o source, disp lay mode on the OS D screen. MENU → ,.
Check List Before calling for serv ice, check the i nformation in t his section to s ee if you can rem edy any proble ms yourself. If you do ne ed assistance, plea se call the phone numb er on the Informa tion section or contact your deal er . Symptom Che ck List Solutions No images on the screen.
the monito r and restore the image on the screen . I cannot see the On Screen Display. Have you lo cked the On Screen Display (OSD) M enu to prevent changes? Unlock the OSD by pressing the [ ] button for at le ast 5 seconds. The screen show s strange colors o r just black and white.
Sound level is too low. Check the volume level. If the volume is still too low after turning the con trol to its maximum, check the volu me control on the com puter sound card or s oftware progra m. Check wh en MagicTune™ d oes not function properly.
digital device su ch as a digital camera, camcorder or U SB memory to the USB port, but they do not work. an additiona l driver installat ion. Check if the device you wa nt to conn ect to is a device that su pports the remov able disk f unction withou t an addition al driver instal lation.
monitor with a so ft cloth, using ei ther a cleani ng solution or pl ain water. Do not leave an y remain s of the deterg ent nor scratch the case. Do no t allow any wat er to go inside the monitor.
Video mode n ot supported, etc. In this ca se, first che ck the source of th e problem, and then contac t the Service Center or your dealer. Judging the monitor's working c ondition If there is n.
S p ecifications General Model Name SyncMaster 711LT LCD Panel Size 17 inch (43 cm ) Display area 337.92 mm (H) x 270 .336 mm (V) Pixel Pitch 0.264 mm (H) x 0.
AC 100 - 240 V ~ (+/- 10 %), 50/60 H z Signal Cable 15pin to 15pi n D-sub ca ble, Detac hable Dimensions (W x H x D) / Weight 370.0 x 342.3 x 69 mm / 14. 6 x 13.5 x 2. 7 inch (Witho ut Stand) 370.0 x 404.3 x 200 mm / 14.6 x 15.9 x 7.9 in ch (With Basic S tand), 6.
5~7 P4 3.0 GHz 1 Gbyte 100 Mbps Server 8~10 P4 3.2 GHz 2 Gbyte The content presented abo ve is the resu lt of testing a s pecific serv er. The information may change as the server may be differen t. For some p roducts, the OS may no t be supported. Whe n purchasing a product, make sure to ch eck whether or not th e OS is supporte d.
VESA, 800 x 600 35.156 56.250 36.000 +/+ VESA, 800 x 600 37.879 60.317 40.000 +/+ VESA, 800 x 600 48.077 72.188 50.000 +/+ VESA, 800 x 600 46.875 75.000 49.500 +/+ VESA, 1024 x 768 48.363 60.004 65.000 -/- VESA, 1024 x 768 56.476 70.069 75.000 -/- VESA, 1024 x 768 60.
S p ecifications General Model Name SyncMaster 911LT LCD Panel Size 19 inch(48 cm) Display area 376.32 mm(H) x 301.056 mm (V) Pixel Pitch 0.294(H) x 0.
AC 100 - 240 V ~ (+/- 10 %), 50/60 H z Signal Cable 15pin-to-15pin D-sub cabl e, Detachable Dimensions (W x H x D) / Weight 416.6 X 375.2 X 74.7 mm / 16.4 x 14.8 x 2.9 inch (W ithout Stand) 416.6 X 420.9 X 200.0 mm / 16.4 x 16.6 x 7.9 inch (Wi th Stand) / 6 .
5~7 P4 3.0 GHz 1 Gbyte 100 Mbps Server 8~10 P4 3.2 GHz 2 Gbyte The content presented abo ve is the resu lt of testing a s pecific serv er. The information may change as the server may be differen t. For some p roducts, the OS may no t be supported. Whe n purchasing a product, make sure to ch eck whether or not th e OS is supporte d.
VESA, 640 x 480 37.500 75.000 31.500 -/- VESA, 800 x 600 35.156 56.250 36.000 +/+ VESA, 800 x 600 37.879 60.317 40.000 +/+ VESA, 800 x 600 48.077 72.188 50.000 +/+ VESA, 800 x 600 46.875 75.000 49.500 +/+ VESA, 1024 x 768 48.363 60.004 65.000 -/- VESA, 1024 x 768 56.
Contact SAMSUNG WO RLDWIDE If you have any questions or comm ents relati ng to Sa msung products, p lease contact the SAMSUNG customer ca re center. North America U.S.A 1-800 -SAMSUNG (72 6-7864) http://www.samsung. com CANADA 1-800-SAMSUNG (72 6-7864) http://www.
TRINIDAD & TOBAGO 1-800-SAMSUN G(726-7864) http ://www.samsung.co m/latin VENEZUELA 0-800 -100-5303 http://www.samsung.co m/latin Europe AUSTRIA 0800-SAMSUNG(726-7864 ) http://www.samsu ng.com/at BELGIUM 0032 (0)2 201 24 18 http://www.samsung. com/be CZECH REPUBLI C 844 000 844 http://www.
UKRAINE 8-800 -502-0000 http://www.samsung.co m UZBEKISTAN 8-10-800-500-55-500 http://www.samsung.uz Asia Pacific AUSTRALIA 1300 362 603 http://www.samsung. com CHINA 800-810-585 8, 010- 6475 1880 http://www.samsung. com HONG KONG 3698-469 8 http://www.
Showing the h orizontal line s of the scre en from the top t o the bottom sequentially is called th e Non- Interlace meth od while sh owing odd li nes and th en ev en lines in tu rn is called the Interlace m ethod. The Non-Inte rlace method is u sed for the ma jority of mo nitors to ensure a clear imag e.
PRODUCT INFORMATION (I mage Retention Free) LCD Monitors and TVs may have an image retent ion when sw itching from one image to another especially after displaying a statio nary image for a long time. This guide is to demonstrate a corre ct usage of LCD products in order to prote ct them from Image retention.
The best way to prote ct your monitor from Image retentio n is to set your PC or S y stem to o p erate a Screen Saver p ro g ram when y ou are not usin g it. Image retention may not o ccur when a LCD panel is opera ted under normal conditio ns. Normal conditions are defined as continuously changi ng video patterns.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Samsung 911LT c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Samsung 911LT - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Samsung 911LT, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Samsung 911LT va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Samsung 911LT, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Samsung 911LT.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Samsung 911LT. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Samsung 911LT ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
