Manuel d'utilisation / d'entretien du produit R9943 du fabricant Roberts Radio
Aller à la page of 24
R9943 3 band PLL Synthesised Radio Please read this manual before use ROBER TS Sound for Generations.
Controls .......................................................................... 2- 3 Display ............................................................................... 4 Battery operation ......................................................
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 2 Controls 1. On/Off/Sleep button 2. Light button 3. Waveband, Time set, FM Stereo/Mono button 4. Tuning Up/Down buttons (Top) 1 23 4 5 6 7 5. Telescopic aerial 6.
3 Controls (Right side) 8. Headphone socket 9. Tone control 10. Volume control 11. Rotary tuning control 12. Mains input socket (on rear) 13. Battery compartment (on rear) 11 10 9 8 12 13.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 4 1. Step indicator 2. Sleep/Snooze indicator 3. Summer time indicator 4. Stereo indicator 5. Waveband indicators 6. Frequency/Time indicators 7. Frequency units indicators 8.
5 Battery operation 1. Remove the Battery cover on the rear of the unit by pushing the catches in the direction shown by the arrows. 2. Insert four LR20 (D size) batteries into the spaces in the compart- ment. Take care to ensure all batteries are inserted with the correct polarity as shown inside the battery compartment.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 6 Setting the clock 1. The clock will start running when the batteries are installed or when the radio is connected to the mains supply. The display will show 0:00 .
7 Operating you radio Your radio is equipped with four tuning methods:- Scan tuning, Rotary tuning, Manual tuning, and Memory preset tuning. When switched on your radio will display the waveband and frequency in use. A graphical display similar to a conventional radio tuning dial will be shown in the bottom half of the display.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 8 Manual tuning 1. Press the On/Off button to switch on your radio. 2. Select the required waveband by repeatedly pressing the Band button. For the FM waveband fully extend the Telescopic aerial angle and rotate, if necessary, to obtain best reception.
9 Rotary tuning 1. Press the On/Off button to switch on your radio. 2. Select the required waveband by repeatedly pressing the Band button. For the FM waveband fully extend the Telescopic aerial angle and rotate, if necessary, to obtain best reception.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 10 Presetting stations There are 5 memory presets for each of the 3 wavebands. 1. Press the On/Off button to turn on the radio. 2. Tune to the required station using one of the methods previously described.
11 Recalling a preset station 1. Press the On/Off button to turn on the radio. 2. Select the required waveband by repeatedly pressing the Band button. 3. Momentarily press the required Preset button , the preset number and station frequency will appear in the display.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 12 Wake to buzzer alarm A bleep tone will sound when using the buzzer alarm. The alarm bleep will increase in volume every 15 seconds for one minute followed by one minutes silence before repeating the cycle.
13 Wake to radio alarm When the radio alarm is selected the radio will turn on and play the last station listened to. The radio alarm will sound for one hour unless turned off by pressing the On/Off button . Pressing the On/Off button whilst the alarm is sounding will cancel the alarm for 24 hours.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 14 7. Press the Tuning up/down buttons to set the required radio alarm duration. (1, 2, 3 or 4 hours) 8. Press the button to complete alarm setting. 9. To permanently cancel the alarm press the button until the symbol is removed from the display.
15 Sleep timer The sleep timer will automatically switch off the radio after a preset time has elapsed. 1. Press and continue to hold down the button the display will cycle through the available sleep times in the order 90-60-30-15-90. Release the button when the required sleep time appears in the display.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 16 Headphone socket A 3.5mm Headphone Socket located on the right-hand end of you radio is provided for use with either headphones or an earpiece. Inserting a plug automatically mutes the internal loudspeaker.
17 Tuning step size In Europe and other parts of the world MW tuning steps are 9kHz, in America the MW tuning step size is 10kHz. On FM most countries use 100kHz tuning steps, your radio can however be set so as to allow an FM tuning step size of 50kHz.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 18 Summer time Your radio can be set to advance the clock to summer time by pressing a single button. 1. Ensure that your radio is switched off. Press and hold down the Summer time button until the summer time indicator appears in the display.
19 Reset button If your radio fails to operate correctly, or some digits on the display are missing or incomplete carry out the following procedure. 1.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) Specifications Power Requirements Mains AC 230 volts, 50Hz only Batteries 4 x LR20 (D size) Battery Life Approx. 70 hours of listening for 4 hours a day at normal volume using alkaline cells.
The wire coloured BLUE must be connected to the terminal marked N or coloured BLACK. The wire coloured BROWN must be connected to the terminal marked L or coloured RED. Mains supply The R9943 will operate from a supply of AC 230 volts, 50Hz only. DO NOT cut off the mains plug from this equipment.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) These statements do not affect the statutory rights of a consumer.
20 Issue 1 ROBERTS RADIO TECHNICAL SERVICES 97-99 Worton Road Isleworth Middlesex TW7 6EG Technical Helpline :- 020 8758 0338 (Mon-Fri during office hours).
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Roberts Radio R9943 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Roberts Radio R9943 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Roberts Radio R9943, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Roberts Radio R9943 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Roberts Radio R9943, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Roberts Radio R9943.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Roberts Radio R9943. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Roberts Radio R9943 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
