Manuel d'utilisation / d'entretien du produit CD9912 du fabricant Roberts Radio
Aller à la page of 24
CD9912 Stereo CD Radio Cassette Recorder Please read this manual before use ROBER TS Sound for Generations cd9912 instruction book.PMD 4/21/2004, 11:15 AM 1.
Contents ............................................................................. 1 Controls ........................................................................... 2-3 Display .................................................................
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) Controls (Top) 1. Volume control 2. Spatial sound control 3. Function switch 4. Telescopic aerial 5. Digital sound control 6. CD door 12 11 10 9 8 7 7. Pause button 8.
Controls (Front) 13. Intro button 14. Random/Memory down button 15. Repeat/Memory up button 16. Band select button 17. Tuning Up/F.Skip button 18. Tuning Down/B.Skip button 19. Display P l ay/P au s e SE NSOR Trac k On Stop Prog Stand By UP/ F.Sk i p Repeat Random MEM Int ro DOWN/ B.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) Display 4 Indicates sound effect Lights during CD playback Lights during CD pause Lights during CD intr.
ON Battery operation 1. Remove the Battery cover on the rear of your CD radio cassette by pushing the catches in the direction of the arrows. 2. Insert two LR6 (AA size) batteries into the small spaces in the battery compartment. Insert eight LR20 (D size) batteries into the remaining spaces in the compartment.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) Sound controls Volume 1. Adjust the volume to the required level using the Volume control. Spatial sound 1. This feature creates a 3-D effect from the stereo sound produced by the loudspeakers.
Radio operation note : the two LR6 batteries provide power for the radio memory and must be fitted at all times. 1. Set the Function switch to the 'Radio' position. 2. Adjust the Volume control until a hissing sound is heard. 3. Repeatedly press and release the Band button until the required waveband appears in the display.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) Presetting stations You may store up to 40 different stations, 20 on FM, 10 on MW and 10 on LW. 1. Select the required waveband using the Band button . 2.
Recalling a preset station 1. Select the required waveband using the Band button. 2. Select the desired memory channel using the MEM or buttons . The display indicates the selected channel, station frequency and waveband. Last station memory 1. Your radio provides an automatic last station memory function.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) Compact discs Use only Digital Audio CDs which have the symbol. Never write on a CD or attach any sticker to the CD. Always hold the CD at the edge and store it in its box after use with the label facing up.
Playing a CD 1. Press the Play/Pause button to start playback. 2. Set the Volume to the required level. 3. Set the Spatial sound and DSC controls to the required positions. 4. To pause playback press the Play/Pause button . The Pause symbol will appear in the display.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) Selecting a track 1. Whilst the CD is playing, press either the B.skip or F.skip buttons to change to the desired track. 2. You can also skip tracks when the player is in stop mode.
Repeat play Repeating the CD 1. Press the Repeat button once. 'REPEAT' will appear in the display. 2. Press the Play/Pause button , the CD will repeat continuously. 3. Press the Stop button to cancel repeat play. Repeating a track 1. Press the Repeat button twice.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) Checking a programme 1. Whilst the CD is in STOP mode, repeatedly press and release the Prog. button to step through the programme. The display will show the programme and track numbers.
Playing a programme 1. Press the Prog. button once to show the first track of the programme. 2. Press the Play/pause button. Play will start with the first track of the programme and stop after the last track of the programme. 3. Press the Stop button to stop playback of a programme.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) Listening to cassette tapes Note: This unit is not suitable for recording onto CHROME (IEC II) or METAL (IEC IV) cassettes. For playback any cassette type may be used 1.
Recording from the Radio 1. Set the Function switch to the 'Radio' position. 2. Tune in to the desired station. 3. Adjust the Volume control to suit your requirements. 4. Insert a blank cassette with the tape surface downwards and the side you wish to record on facing towards you.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 18 Preventing accidental erasure 1. To safeguard your recordings against accidental erasure, break off the appropriate tab on the cassette as shown . 2. There is one tab for each side of the cassette.
Remote control The buttons on the remote control have the same functions as the corresponding buttons on the main unit. Note: When using your CD radio cassette on batteries, the Standby button on the remote handset can only be used to switch the unit off.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 20 Headphones 1. A Headphone Socket (3.5mm) located on the left hand end of your CD radio cassette is provided for use with either headphones or an earpiece.
21 Specifications Power Requirements Mains AC 230 volts, 50Hz only Batteries 8 x LR20 (C size) 2 x LR6 (AA size) 2 x LR03 (AAA size) included Frequency Coverage FM 87.5-108MHz MW 522- 1620kHz LW 146- 281kHz Circuit Features Loudspeaker 2 x 100mm Output Power 2 x 2.
If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) Guarantee This instrument is guaranteed for twelve months from the date of delivery to the original owner against failure due to faulty workmanship or component breakdown, subject to the procedure stated below.
ROBERTS RADIO TECHNICAL SERVICES DEPARTMENT 97-99 Worton Road Isleworth Middlesex TW7 6EG Technical Helpline:- 020 8758 0338 (Mon-Fri) Issue 1 cd9912 instruction book.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Roberts Radio CD9912 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Roberts Radio CD9912 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Roberts Radio CD9912, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Roberts Radio CD9912 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Roberts Radio CD9912, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Roberts Radio CD9912.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Roberts Radio CD9912. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Roberts Radio CD9912 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
