Manuel d'utilisation / d'entretien du produit BLUTUNE 50 du fabricant Roberts
Aller à la page of 44
Please read this manual before use ROBER TS DAB / DAB+ / FM Bluetooth stereo digital radio Enjoy Listening.
Controls ........................................................................... 2-3 Using the radio for the fi rst time...........................................4 Operating your radio ............................................................
If you need any further advice, please call our T echnical Helpline on :- 020 8758 0338 (Mon-Fri) 2 Controls (T op) 1. T uning / Select / Info control 2. Loudspeakers x 2 3. LCD display 4. Menu button 5. Snooze button 1 7 6 3 5 14 6. V olume control 7.
3 Controls (rear) 15. DAB / FM wire aerial 16. USB socket (for software upgrades only) 17. Charging socket 18. DC input socket 19. Headphone socket 20.
If you need any further advice, please call our T echnical Helpline on :- 020 8758 0338 (Mon-Fri) 4 Using the radio for the fi rst time 1. Place your radio on a fl at surface. 2. Fully extend the wire aerial located on the rear of your radio. Place the wire antenna so that it is as straight as possible extending either above or below the radio.
5 Operating your radio 1. Press and release the On/Off button to switch on your radio. When fi rst switched on, the radio will be in DAB mode. After each use the radio will remember the mode used and then switch on in that mode the next time that it is used.
If you need any further advice, please call our T echnical Helpline on :- 020 8758 0338 (Mon-Fri) 6 Selecting a station - DAB 1. Press and release the On/Off button to switch on your radio. 2. Press and release the Mode button until the DAB mode is selected.
7 Secondary services - DAB 1. Certain radio stations have one or more secondary services associated with them. If a station has a secondary service associated with it then the secondary service will then appear immediately after the primary service as you rotate the Tuning control.
If you need any further advice, please call our T echnical Helpline on :- 020 8758 0338 (Mon-Fri) 8 i d h Display options DAB - cont d. Scrolling text Displays scrolling text messages such as artist/track name, phone in number , etc. e. Programme type Displays the type of station being listened to e.
9 Finding new stations - DAB From time to time, new DAB radio stations may become available. Or you may have moved to a different part of the country . In this case you may need to cause your radio to scan for new stations. 1. Press and release the On/Off button to switch on your radio.
If you need any further advice, please call our T echnical Helpline on :- 020 8758 0338 (Mon-Fri) 10 Manual tuning - DAB Manual tuning allows you to tune your radio to a particular DAB frequency in Band III. Any new stations found will be added to the station list.
11 Dynamic Range Control (DRC) - DAB The DRC facility can make quieter sounds easier to hear when your radio is used in a noisy environment. There are three levels of compression: DRC 0 No compression applied. (default) DRC 1/2 Medium compression applied.
If you need any further advice, please call our T echnical Helpline on :- 020 8758 0338 (Mon-Fri) 12 Prune stations - DAB Over time, some DAB services may stop broadcasting, or may change location and then not be able to receive a station.
Operating your radio - FM auto-tune 1. Fully extend the wire aerial located on the rear of your radio. Place the wire antenna so that it is as straight as possible extending either above or below the radio. 2. Press and release the On/Off button to switch on your radio.
If you need any further advice, please call our T echnical Helpline on :- 020 8758 0338 (Mon-Fri) 14 Manual tuning - FM 1. Fully extend the wire aerial located on the rear of your radio. Place the wire antenna so that it is as straight as possible extending either above or below the radio.
Display options - FM Y our radio has a range of display options for the FM mode:- The Radio Data System (RDS) is a system in which inaudible digital information is transmitted in addition to the normal FM radio programme. RDS offers several useful features.
If you need any further advice, please call our T echnical Helpline on :- 020 8758 0338 (Mon-Fri) 16 Scan sensitivity setting - FM Y our radio will normally scan for FM broadcasts which are strong enough to give good reception.
17 Stereo / Mono setting - FM Y our radio will play stereo FM broadcasts in stereo provided that the received signal is of adequate strength. However , as a stereo signal becomes weaker the audio signal will become poorer . It may be preferable to force the radio to play the station in mono in order to reduce the level of background hiss.
If you need any further advice, please call our T echnical Helpline on :- 020 8758 0338 (Mon-Fri) 18 Presetting stations Y ou may store your preferred DAB and FM radio stations to the preset station memories. There are 20 memory presets in your radio, 10 for DAB and 10 for FM.
Recalling a preset station 1. Press and release the On/Off button to switch on the radio. 2. Repeatedly , press and release the Mode button to select either the FM or DAB mode. 3. Press and release the Preset button. The display will show , for example, 'Empty 1' if no station has been stored to that preset.
If you need any further advice, please call our T echnical Helpline on :- 020 8758 0338 (Mon-Fri) 20 Bluetooth mode The Bluetooth mode on your radio allows you to play audio, play sound from video fi les and stream music from Bluetooth capable devices such as your moblie phone, computer , tablet etc.
21 Connecting Bluetooth devices 1. Ensure that the Bluetooth capability on your phone, tablet or PC is enabled. Y ou may need to refer to the user documentation for your device, since the method will vary with each device. 2. Press and release the On/Off button to switch on the radio.
If you need any further advice, please call our T echnical Helpline on :- 020 8758 0338 (Mon-Fri) 22 Playing audio fi les in Bluetooth mode When you have successfully connected your radio with the chosen Bluetooth device you can start to play your music using the controls on your connected Bluetooth device.
23 Disconnecting a Bluetooth device Y ou can only have one Bluetooth device connected to the radio at any one time although it may be paired with several devices. Once you have a Bluetooth enabled device connected to your radio it cannot be interrupted by another Bluetooth device unless you choose to break the connection.
If you need any further advice, please call our T echnical Helpline on :- 020 8758 0338 (Mon-Fri) 24 Setting alarm times Y our radio has two alarms which can be set to wake you to DAB, FM radio or beep type alarm. Each alarm can be set to sound once, daily , on weekdays or at weekends.
25 7. Rotate the Tuning control to choose the desired alarm minute. 8. Press and release the Tuning control to enter the minutes setting. The alarm day option will fl ash on the display . • If your radio has been set to use the 12 hour clock format there will be an option here to set either AM or PM.
If you need any further advice, please call our T echnical Helpline on :- 020 8758 0338 (Mon-Fri) 26 14. Press and release the Tuning control to enter the alarm month setting. The alarm year will fl ash on the display . 15. Rotate the Tuning control to choose the alarm year .
27 Cancelling alarms 1. While an alarm is sounding press and release the On/Off button to cancel the alarm. When the alarm sounds The alarm will sound at the selected times for up to 60 minutes unless cancelled. The maximum volume used for the radio alarm will be speci fi ed during the alarm setting procedure.
If you need any further advice, please call our T echnical Helpline on :- 020 8758 0338 (Mon-Fri) 28 T o view the alarm settings 1. Press and hold the Alarm button. ' Alarm 1' will show on the display and the alarm indicator will fl ash on the display .
29 Sleep function Y our radio can be set to turn of f after a preset time has elapsed. The sleep setting can be adjusted between 15 and 90 minutes in increments. Ensure your radio is switched on. 1. When using your radio, press and hold the Sleep button and then release the button.
If you need any further advice, please call our T echnical Helpline on :- 020 8758 0338 (Mon-Fri) 30 Setting the clock format The clock display used in standby mode and when the clock radio is in use can be set to 12 or 24 hour format. The clock format can only be set while the unit is playing.
31 Setting the clock manually Normally your radio will set its clock automatically using the DAB radio signal. If no DAB signal is available and you need to set the time manually , please follow the procedure shown below . 1. Press and release the On/Off button to switch on the radio.
If you need any further advice, please call our T echnical Helpline on :- 020 8758 0338 (Mon-Fri) 32 Setting the clock manually - cont 10. Press and release the Tuning control to enter the minutes setting.
33 Automatically updating the clock Y our radio will usually set the clock time using the DAB signal. Y ou may specify that the radio sets its clock from the DAB or FM waveband, either waveband or none. If you choose none you will need to set the clock manually .
If you need any further advice, please call our T echnical Helpline on :- 020 8758 0338 (Mon-Fri) 34 Clock display 1. The clock display on your radio can be shown using either a 12 or 24 hour clock format. Display backlight dimmer The brightness of the display can be adjusted when the radio is in standby or when the unit is in use.
35 Software version The software display cannot be altered and is just for your reference. Ensure your radio is switched on. 1. Press and release the On/Off button to switch on your radio. 2. Press and release the Menu button. The menu will show on the display .
If you need any further advice, please call our T echnical Helpline on :- 020 8758 0338 (Mon-Fri) 36 Language function Y our radio can be con fi gured to a different language. Ensure your radio is switched on. 1. Press and release the On/Off button to switch on your radio.
37 System reset If your radio fails to operate correctly , or some digits on the display are missing or incomplete carry out the following procedure. 1. Press and release the On/Off button to switch on the radio. Press and release the Menu button. The menu will show on the display .
If you need any further advice, please call our T echnical Helpline on :- 020 8758 0338 (Mon-Fri) 38 Headphone socket A 3.5mm Headphone Socket located on the rear of your radio is provided for use with either headphones or an earpiece. Inserting a plug automati- cally mutes the internal loudspeaker .
39 Auxiliary input socket 1. Connect a stereo or mono audio source (i.e. CD player , MP3 player , etc.) to the Auxiliary input socket. 2. Press the On/Off button to switch on the radio. 3. Press and release the Mode button until the display shows 'AUX IN' .
If you need any further advice, please call our T echnical Helpline on :- 020 8758 0338 (Mon-Fri) 40 USB socket for iPhone or smartphone charging Y our radio has a USB socket which is intended only for charging an iPhone or smart phone and similar devices.
41 Cautions Do not allow this radio to be exposed to water , steam or sand. Do not leave your radio where excessive heat could cause damage such as in a parked car where the heat from the sun can build up even though the outside temperature may not seem too high.
If you need any further advice, please call our T echnical Helpline on :- 020 8758 0338 (Mon-Fri) 42 The Company reserves the right to amend the speci fi cation without notice. Circuit Features Loudspeaker x 2 34 mm Bass speaker 70 mm Output Power 2 x 5 Watts +10 W atts Headphone socket 3.
Guarantee This instrument is guaranteed for twelve months from the date of delivery to the original owner against failure due to faulty workmanship or component breakdown, subject to the procedure stated below . Should any component or part fail during this guarantee period it will be rep aired or replaced free of charge.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Roberts BLUTUNE 50 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Roberts BLUTUNE 50 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Roberts BLUTUNE 50, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Roberts BLUTUNE 50 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Roberts BLUTUNE 50, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Roberts BLUTUNE 50.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Roberts BLUTUNE 50. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Roberts BLUTUNE 50 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
