Manuel d'utilisation / d'entretien du produit R3111x Series du fabricant Ricoh
Aller à la page of 44
R3111x SERIES LOW VOLTAGE DETECTOR NO.EA-056-080131 1 OUTLINE The R31 1 1x series are CMOS-based voltage dete ctor IC s with high detector thre shold accuracy and ultra-low supply current, which can be operated at an extremely lo w voltage and is used for system reset as an example.
R31 1 1x 2 BLOCK DIAGRAMS R31 1 1xxxxA R31 1 1xxxxB OUT V DD Vr e f GND OUT V DD Vr e f GND R31 1 1xxxxC OUT V DD GND Vr e f.
R 3 111 x 3 SELECTION GUIDE The package type, the detector thresh old, the output type and the taping type for the ICs can be selected at the users’ request.
R31 1 1x 4 PIN CONFIGURATIONS TO-92 SOT-89 SOT-23-3 SOT-23-5 SC-82AB SON1612- 6 3 12 (mark side) 3 12 (mark side) 1 2 3 (mark side) 123 4 5 (mark side) 43 1 2 (mark side) 1 2 3 6 5 4 (mark sid e ) PIN DESCRIPTIONS TO-92 SOT-89 SOT-23-3 Pin No.
R 3 111 x 5 ABSOLUTE MAXIMUM RATINGS Symbol Item Ratin g Unit V DD Supply Voltage 12 V V OUT1 Output Voltage (CMOS) V SS − 0.3 to V DD + 0.3 V V OUT2 Output Voltage (Nch) V SS − 0.
R31 1 1x 6 ELECTRICAL CHARACTERISTICS • R3111x09xA/C Topt = 25 ° C Symbol Item Conditions Min. Typ. Max. Unit − V DET Detector Threshold 0.882 0.900 0.918 V V HYS Detector Threshold Hysteresis 0.027 0.045 0.063 V I SS Supply Current V DD = 0.80V V DD = 2.
R 3 111 x 7 • R3111x27xA/C Topt = 25 ° C Symbol Item Conditions Min. Typ. Max. Unit − V DET Detector Threshold 2.646 2.700 2.754 V V HYS Detector Threshold Hysteresis 0.081 0.135 0.189 V I SS Supply Current V DD = 2.60V V DD = 4.70V 0.9 1.1 2.7 3.
R31 1 1x 8 • R3111x45xA/C Topt = 25 ° C Symbol Item Conditions Min. Typ. Max. Unit − V DET Detector Threshold 4.410 4.500 4.590 V V HYS Detector Threshold Hysteresis 0.135 0.225 0.315 V I SS Supply Current V DD = 4.34V V DD = 6.50V 1.1 1.3 3.3 3.
R 3 111 x 9 • R3111Q231B Topt = 25 ° C Symbol Item Conditions Min. Typ. Max. Unit − V DET Detector Threshold 2.254 2.300 2.346 V V HYS Detector Threshold Hysteresis 0.069 0.115 0.161 V I SS Supply Current V DD = 2.2V V DD = 4.3V 0.9 1.1 2.7 3.3 µ A V DDH Maximum Operating Volta ge 10 V Topt = 25 ° C 0.
R31 1 1x 10 TIMING CHART Detector Threshold t PLH t PLH t PLH GND GND V DDL - V DET +V DET Detect or T hreshold Released V oltage Minimum Operating V oltage Pull-up V oltage Supply Vo l t a g e (V DD .
R 3 111 x 11.
R31 1 1x 12 ELECTRICAL CHARACTERISTICS BY DETECTOR THRESHOLD • R3111x09x to R3111x60x Detector Threshold Detector Threshold Hysteresis Supply Current 1 Supply Current 2 − V DET [ V ] V HYS [ V ] I SS1 [ µ A ] I SS2 [ µ A ] Part Number Min. Typ. Max.
R 3 111 x 13 Output Current 1 * 3 Output Current 2 * 3 Output Dela y Time Minimum Operating Voltage Detector Threshold Temperature Coeffi cient I OUT1 [ mA ] I OUT2 [ mA ] t PLH [ µ s ] V DDL [ V ] ∆− V DET / ∆ Topt [ ppm/ ° C ] Condition Min.
R31 1 1x 14 OPERATION • Operation of R3111xxxxA Vr e f Ra Rb Rc V DD OUT GND Tr .1 Nch Com p arato r OUT pin shoul d be pulled- up to V DD or an ext ernal voltage level.
R 3 111 x 15 • Operation of R3111xxxxB Vr e f Ra Rb Rc V DD OUT GND Tr .1 Nch Com p arato r OUT pin shoul d be pulled- up to V DD or an ext ernal voltage level.
R31 1 1x 16 • Operation of R3111xxxxC Vr e f Ra Rb Rc V DD OUT GND Tr . 1 Nch Pch Com p arato r Block Diagram (R31 1 1 xxxxC) t PLH GND GND V DDL - V DET +V DET Detector Threshold Released V oltage .
R 3 111 x 17 TEST CIRCUITS GND V DD V IN I SS R 3 111 x Series OUT GND V DD V IN R 3 111 x Series OUT 470k Ω 5V V OUT Supply Current T est Circuit Detector Threshold T est Circuit (Pull-up circuit is not neces sary for CMOS Output type.
R31 1 1x 18 TYPICAL CHARACTERISTICS 1) Supply Current vs. Input Voltage R31 1 1x09xC R31 1 1x27xC T opt=85 ° C 25 ° C -40 ° C 2.5 2.0 1.5 1.0 0.5 0.0 Input V oltage V IN (V) 02 4 6 8 1 0 Supply Current I SS ( µ A) T opt=85 ° C 25 ° C -40 ° C 2.
R 3 111 x 19 R31 1 1x45xC 4.8 4.7 4.6 4.5 4.4 +V DET -V DET T emperature T opt( ° C) - 6 0 0 2 04 06 08 0 -40 -20 100 Detector Threshold -V DET (V) 3) Output Voltage vs. Input Voltage R31 1 1x09xC R31 1 1x09xA T opt=-40 ° C 25 ° C 85 ° C 1.6 1.4 1.
R31 1 1x 20 R31 1 1x45xC R31 1 1x45xA T opt=-40 ° C 25 ° C 85 ° C 6 5 4 3 2 0 1 Input V oltage V IN (V) 02 3 16 5 4 Output V oltage V OUT (V) 5V Pull-up 470k Ω 6 5 4 3 2 0 1 Input V oltage V IN (V) 02 3 16 5 4 Output V oltage V OUT (V) T opt=-40 ° C 25 ° C 85 ° C 4) Nch Driver Output Current vs.
R 3 111 x 21 R31 1 1x45xC R31 1 1x45xC T opt=25 ° C V DD =4.5V 4.0V 3.5V 3.0V 2.5V 2.0V 1.5V 60 50 40 30 20 0 10 V DS (V) 0 0.5 1 1.5 2 2.5 3 4 3.5 4.5 Output Current I OUT (mA) V DD =0.8V 0.7V T opt=25 ° C 300 250 200 150 100 0 50 V DS (V) 0 0.02 0.
R31 1 1x 22 6) Pch Driver Output Current vs. Input Voltage R31 1 1x09xC R31 1 1x27xC T opt=25 ° C V DS =0.7V 0.5V 1.4 1.2 1.0 0.8 0.6 0.4 0.0 0.2 Input V oltage V IN (V) 024 68 Output Current I OUT (mA) T opt=25 ° C V DS =2.1V 1.5V 0.5V 1.0V 3.5 3.0 2.
R 3 111 x 23 R31 1 1x45xA t PLH t PHL 100 10 1 0.1 0.01 0.001 Load Capacitance C OUT ( µ F) 0.0001 0.01 0.001 0.1 Output Dela y Time tP(ms) 8) Output Delay Time vs. Input Pin Capacitance R31 1 1x09xA R31 1 1x27xA t PHL t PLH 100 10 1 0.1 0.01 0.001 Input Pin Capacitance C IN ( µ F) 0.
R31 1 1x 24 TYPICAL APPLICATION • R3111xxxxA CPU Res e t Circuit (Nch Open Drain Output) Case 1. Input Voltage to R3111xxxxA is equal to Input Voltage to CPU Case 2.
R 3 111 x 25 • Voltage level Indicator Circuit (lighted when the power runs out) (Nch Open Drain Output) R 3 111 x x x x A Series V DD GND OUT V DD • Detector Threshold Adjustable Circuit (Nch Ope.
R31 1 1x 26 TECHNICAL NOTES When R31 1 1xxxxA/B (Nch Open Drain Ou tput T ype) is used in Figure A or Figure B, if impedance of V oltage Supply pin, V DD and V DD of this IC is large, detector threshold level would shift by volt age dropdown caused by the consumption current of the IC itself.
P ACKAGE INFORMA TION PE-TO-92-061 1 • TO-92 (SC-43A) Unit: mm PACKAGE DIMENSIONS 5.2Max. 4.2Max. 2.3Max. 5.2Max. 12.7Min. 0.6Max. 0.55Max. 1.27 2.54 1 2 3 0.7 0.5Max. 5.2 Max. 4.2 Max. 2.3 Max. 5.2 Max. 12.7 Min. 0.6 Max. 0.55 1 2 3 0.5 Max. Max. 2.
P ACKAGE INFORMA TION PE-TO-92-061 1 POWER DISSIPATION (TO-92) This specification is at mounted on bo ard. Measurement Result (Topt=25 ° C,Tjm ax=125 ° C) Free Air Power Dissip ation 300mW Thermal Resist ance θ ja = (125 − 25 ° C)/0.
P ACKAGE INFORMA TION PE-SOT -89-071210 • SOT-89 (SC-62) Unit: mm PACKAGE DIMENSIONS 4.5 ± 0.1 0.4 ± 0.1 0.4 ± 0.1 1.5 ± 0.1 1.6 ± 0.2 1.5 ± 0.1 ± 0. 1 1.5 ± 0.1 2.5 ± 0.1 1.0 ± 0.2 0.3 ± 0.2 ∅ 1.0 12 3 3 2 1 0.4 2 ± 0.1 0. 4 7 0 .42 ± 0.
P ACKAGE INFORMA TION PE-SOT -89-071210 POWER DISSIPATION (SOT-89) This specification is at m ounted on board. Power Di ssipation (P D ) depends on conditions of mounting on board.
PA C K AGE INFORMA TION PE-SOT -23-5-071228 • SOT-23-5 (SC-74A) Unit: mm PACKAGE DIMENSIONS 2.9 ± 0.2 0.4 ± 0.1 1.9 ± 0.2 (0.95) (0.95) 54 12 3 +0.2 − 0.1 1.6 +0.2 − 0.1 1.1 +0.1 − 0.05 0.15 2.8–0.3 0 to 0.1 0.8 ± 0.1 0.2 Min. TAPING SPECIFICATION 2.
PA C K AGE INFORMA TION PE-SOT -23-5-071228 POWER DISSIPATION (SOT-23-5) This specification is at mou nted on board. Power Dissip ation (P D ) depends on conditions of mounting on board. This specification is based on the measurement at the condition below: (Power Dissip ation (S OT -23-5) is substitution of SOT -23-6.
P ACKAGE INFORMA TION PE-SOT -23-3-0510 • SOT-23-3 (SC-59A) Unit: mm PACKAGE DIMENSIONS 2.9 ± 0.2 0.4 ± 0.1 1.9 ± 0.2 (0.95) (0.95) 3 12 1.6 ± 0.2 +0.2 –0.1 1.1 +0.1 –0.06 0.16 2.8 ± 0.3 0.2 MIN. 0.8 0 to 0.1 1.4MAX. TAPING SPECIFICATION (T1: Standard Type) 2.
P ACKAGE INFORMA TION PE-SOT -23-3-0510 POWER DISSIPATION (SOT-23-3) This specification is at mou nted on board. Power Dissip ation (P D ) depends on conditions of mounting on board. This specification is based on the measurement at the condition below: (Power Dissip ation (SOT -23-3) is substitution of SOT -23-6.
P ACKAGE INFORMA TION PE-SC-82AB-0512 • SC-82AB Unit: mm PACKAGE DIMENSIONS 0.3 ± 0.2 3 2 1 4 1.3 ± 0.2 0.3 ± 0.1 0.3 ± 0.1 (0.7) 0.9 ± 0.1 0 to 0.1 0.3 ± 0.1 0.4 ± 0.1 0.05 0.16 +0.1 − 0.06 2 ± 0.2 2.1 ± 0.3 1.25 ± 0.2 − 0.1 TAPING SPECIFICATION 2.
P ACKAGE INFORMA TION PE-SC-82AB-0512 POWER DISSIPATION (SC-82AB) This specification is at mou nted on board. Power Dissip ation (P D ) depends on conditions of mounting on board.
P ACKAGE INFORMA TION PE-SON1612-6-0510 • SON1612-6 Unit: mm PACKAGE DIMENSIONS 64 13 1.6 ± 0.1 0.125 ± 0.055 0.22 ± 0.05 0.3TYP. 1.2 ± 0.05 0.6MAX. (0.2) (0.3) (0.3) 1.6 ± 0.05 0.08 0.5 0.08 M TAPING SPECIFICATION 1.5 +0.1 0 4.0 ± 0.1 1.75 1.
P ACKAGE INFORMA TION PE-SON1612-6-0510 Power Dissipation (SON1612-6) This specification is at mounted on board. Power Dissip ation (P D ) depends on conditions of mounting on board.
MARK INFORMA TION ME-R31 1 1E-0310 R3111E SERIES MARK SPECIFICATION • TO-92 (SC-43A) 1 2 3 4 5 6 7 8 9 10 11 12 1 to 5 : Series Name: R3111 (fixed) 6 , 7 : Detector Threshold: ex.
MARK INFORMA TION ME-R31 1 1H-0310 R3111H SERIES MARK SPECIFICATION • SOT-89 (SC-62) 1 2 3 4 5 6 1 to 4 : Product Code (refer to Part Number vs. Produ ct Code) 5 , 6 : Lot Number • Part Number vs.
MARK INFORMA TION ME-R31 1 1Nxx1-0310 R3111Nxx1 SERIES MARK SPECIFICATION • SOT-23-5 (SC-74A) 1 2 3 4 1 , 2 : Product Code (refer to Part Number vs. Produ ct Code) 3 , 4 : Lot Number • Part Number vs.
MARK INFORMA TION ME-R31 1 1Nxx2-0310 R3111Nxx2x SERIES MARK SPECIFICATION • SOT-23-3 (SC-59A) 1 2 3 4 1 , 2 : Product Code (refer to Part Number vs.
MARK INFORMA TION ME-R31 1 1Q-070918 R3111Q SERIES MARK SPECIFICATION • SC-82AB 2 4 1 3 1 , 2 : Product Code (refer to Part Number vs. Produ ct Code) 3 , 4 : Lot Number • Part Number vs.
MARK INFORMA TION ME-R31 1 1D-070918 R3111D SERIES MARK SPECIFICATION • SON1612-6 1 2 3 4 5 6 1 to 4 : Product Code (refer to Part Number vs. Product Code) 5 , 6 : Lot Number • Part Number vs.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Ricoh R3111x Series c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Ricoh R3111x Series - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Ricoh R3111x Series, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Ricoh R3111x Series va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Ricoh R3111x Series, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Ricoh R3111x Series.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Ricoh R3111x Series. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Ricoh R3111x Series ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
