Manuel d'utilisation / d'entretien du produit Sportsman 9921477 du fabricant Polaris
Aller à la page of 143
1 WELCOME Thank you for purch asin g a Polaris vehicl e, and welcome to our world- wide family of Polaris owners. W e proudly pro duce an exciting line of utility and recreati onal products.
2 POLARIS and POLARIS THE W A Y OU T are registere d trademarks of Polaris Indus- tries Inc. Copyright 2007 Polaris Sales Inc. All inform ation contained within this publication is based on the latest product information at th e time of publication.
3 T A BLE OF CONTENTS Know Y our V ehicle . . . . . . . . . . . . . . . . . . . . . . . 5 Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 F eatures and Controls . . . . . . . . . . . . . . . . . . . 34 Operation . . . . . . .
4.
5 KNOW Y OUR VEHICLE As the operator of the vehicle, yo u are responsible for your persona l safety , the safety o f others, and th e prot ection o f our en vironmen t. Read and understand your o wner's manual, which includes valuab le informa- tion abou t all aspects of your vehicle, including safe operating proce- dures.
6 SAFETY Safety Decals and Locations W arning decals have been pl aced on the A TV for your protection . Read and follow the instructions of the de cals on the A TV carefully . If any of the decals depicted in this manual dif fer from the decals on yo ur A TV , always read and follow the instruc tions of the decals on the A TV .
7 SAFETY Safety Decals and Locations Discretionary W arning WARNING • Never operate this A TV on HILLS steeper than 25 degree s 25 ° . To p r e - vent flip-over on hilly te rrain, when going up or dow n, use throttle and brakes gradually . • REVERSE operation can be dangerous even at lo w speeds.
8 SAFETY Safety Decals and Locations “No P asseng er” W arning WARNING NEVER ride as a passenger . P assengers can cause a loss of control, resulting in SEVERE INJURY or DEA TH . Age 16 W arning WARNING Operating this A TV if you are under th e age of 1 6 increases your chance of severe injury or d eath.
9 SAFETY Safety Decals and Locations Clutch Cover Warning WARNING NO STEP • Moving parts hazard under belt-clutch guard. T o prevent seriou s injury , do not operate vehicle with guard removed.
10 SAFETY Safe Riding Gear Always wear appropriate clothing when riding an A TV . W ear protective clothing for comfort an d to reduce the ch ance of injury . Helmet W earing a helmet can prevent a sever e head injury . Whenever riding a Polaris vehicle, always wear a helmet that meets or exceeds established safety standards.
11 SAFETY Safe Riding Gear Eye Protection Do not depend on eyeglasses or sunglasses for eye protection. When- ever riding a Polaris vehicle, always wear shatterproof goggl es or use a shatterproof helmet face shield. Po laris recommends wearing approved Personal Protective Equi pment (PPE) bearing markings such as VESC 8, V -8, Z87.
12 SAFETY Operator Safety Age Restrictions This vehicle is an ADUL T VEHIC LE ONL Y . Operation is prohibited for anyone under 16 years of age. WA RN I N G F ailure to follow the warnings contained in this manual can result in severe injury or death. A Po laris A TV is not a toy and can be hazardous to operate.
13 SAFETY Operator Safety Safety T raining A TV safety training is a top priority for Polaris. Wh en you p urchased your new A TV , your deal er instructed you o n the authorized A TV RiderCourse sm available to you an d your e ligible family members.
14 SAFETY Operator Safety The following signal words and symbol s appear througho ut this manual and on your veh icle. Y our safety is involved when these words and sym- bols are used.
15 SAFETY Operator Safety • Read this manual and all labels carefully , and follow the operating procedures described. • Never operate an A TV without prop er instruction. T ake a training course. Purchasers of a new Polari s A TV and their eli gible family members are entitled to take the A TV RiderCourse sm .
16 SAFETY Operator Safety • Always travel slowly and use extra caution when operating on unfa- miliar terrain. Be alert to changing terrain conditions. • Never operate on excessively ro ugh, slippery , or loose terrain. • Always follow proper turning proce dures as de scribed in this manual.
17 SAFETY Operator Safety • Always check for obstacles before operating in a new area. Never attempt to operate over large obstacles, such as rocks or fallen trees. Always follow proper procedu res when operating over o bstacles as described in this manual.
18 SAFETY Operator Safety FOR MORE INFO RMA TION ABOU T A TV SAFETY , call the Consumer Product Sa fety Commission at 1-80 0-638-2772 , or visit www .cpsc.gov , visit www .atvsafety .org, or call Pola ris at 1-800-342- 3764. Equipment Modifications W e are concerned for the safety of our customers and for the general public.
19 SAFETY Operator Safety WA RN I N G POTENTIAL HAZARD Operating this A TV without proper instruction. WHA T CAN HAPPEN The risk of an accident is greatl y increased if the operator does n ot know how to operate the A T V properly in different situ ations and on different types of terra in.
20 SAFETY Operator Safety WA RN I N G POTENTIAL HAZARD Carrying a pa ssenger on an A TV . WHA T CAN HAPPEN Carrying a passeng er greatly reduces the operator's ability to balance and control the A TV , which could cause an accident and injury to the operator and/or passenger .
21 SAFETY Operator Safety WA RN I N G POTENTIAL HAZARD Operating this A TV on p ublic streets, roads or highways. WHA T CAN HAPPEN The A TV could collide with another vehicle. HOW TO A VOID THE HAZARD Never operate the A TV on any public street, road or highway , including dirt and gravel roads.
22 SAFETY Operator Safety WA RN I N G POTENTIAL HAZARD Operating the A TV after consuming alcohol or drugs. WHA T CAN HAPPEN Consumption of alcohol and/or drugs could seriously affect operator jud gment. Reaction time may be slower and operator bala nce and perception could be affe cted.
23 SAFETY Operator Safety WA RN I N G POTENTIAL HAZARD Attempting wheelies, jumps and other stunts. WHA T CAN HAPPEN Attempting stunts increa ses the chance of an accident, including an overturn. HOW TO A VOID THE HAZARD Never attempt wheelies, ju mps, or other stunts.
24 SAFETY Operator Safety WA RN I N G POTENTIAL HAZARD Removing hands from the handlebars or feet from the footrests during operation. WHA T CAN HAPPEN Removing even one hand or foot can reduce ability to control the vehicle or could cause loss of balance and ejecti on from the A TV .
25 SAFETY Operator Safety WA RN I N G POTENTIAL HAZARD F ailure to use extra caution whe n operating on exce ssively rough, slippery or loose terrain. WHA T CAN HAPPEN Operating on e xcessively rough, slippery or loose terrain could cause loss of traction or loss of control, which could result in an accident or overturn.
26 SAFETY Operator Safety WA RN I N G POTENTIAL HAZARD Operating on e xcessively steep hil ls. WHA T CAN HAPPEN The vehicle may overturn. HOW TO A VOID THE HAZARD Never operate on hills too steep for the A TV or for your abilities. N ever operate the A TV on hills steeper than 25 degrees.
27 SAFETY Operator Safety WA RN I N G POTENTIAL HAZARD T raveling downhil l improperly . WHA T CAN HAPPEN Improperly descending a hill could cause loss of control or overturn. HOW TO A VOID THE HAZARD Always follow proper procedures fo r traveling down hills as describe d in the owner's manual .
28 SAFETY Operator Safety WA RN I N G POTENTIAL HAZARD Stalling, rolling backwards or improperly dismounting while climbi ng a hill. WHA T CAN HAPPEN The vehicle could overturn. HOW TO A VOID THE HAZARD Maintain steady speed when climbing a hill . Always move the 4X4 switch to ADC 4 X4 before ascending or descendin g a hill.
29 SAFETY Operator Safety WA RN I N G POTENTIAL HAZARD Improperly operating over obstacl es. WHA T CAN HAPPEN Operati ng over obstac les could ca use loss of control or overturn. HOW TO A VOID THE HAZARD Before operating in a ne w area, check for obstacles.
30 SAFETY Operator Safety WA RN I N G POTENTIAL HAZARD Operating the A TV through deep or fast-flowing water . WHA T CAN HAPPEN Tires may float, causing loss of tracti on and loss of control, which co uld lead to an accident o r overturn. HOW TO A VOID THE HAZARD Avoid operating the A TV through deep or fast-flowing water .
31 SAFETY Operator Safety WA RN I N G POTENTIAL HAZARD Operating this A TV with improper tires, or with improper or uneven tire pressure. WHA T CAN HAPPEN Use of improper tires, or operation of the A TV with improper or uneven tire pressure, could cause loss of control or accident.
32 SAFETY Operator Safety WA RN I N G POTENTIAL HAZARD Overloading the A TV or carrying/towing cargo improperly . WHA T CAN HAPPEN Overloading a nd towing can cause change s in vehicle handling, wh ich could lead to loss of control or an accident. HOW TO A VOID THE HAZARD Never exceed the stated load capacity for this A TV .
33 SAFETY Operator Safety WA RN I N G Operating a da maged A T V can result in an accident with se rious injury or death. Afte r any overturn or accid ent, have a qualified service dealer inspect the entire ma chine for possible damage, incl uding (but not limited to) brakes, throttle and st eering systems.
34 FEA TURES AND CONTROLS Switches Mode/Reverse Ov erride Switch This vehicle is equipped with a re verse speed limi ter system .T o gain additional power while backing, depress the override switch. NOTE: The ov erride switch also allows activa tion of 4X4 in reverse, if the 4X4 switch is on.
35 FEA TURES AND CONTROLS Switches Engine Stop Switch Move the stop switch either left or right to the OFF position to stop the e ngine quickly . The engine will not start or run whe n the switch is of f. NOTE: Both th e main switch and the engine stop switch will shut off all electri- cal power to the vehi cle, inclu ding lig hts.
36 FEA TURES AND CONTROLS Throttle Lever Engine speed and vehicle move- ment are contro lled by pressing the throttle lever . The throttle lever is spring loaded.
37 FEA TURES AND CONTROLS Brake Lever Squeeze the brake lever toward the handlebar to ap ply the front and rear brakes. These brakes are hydraulically activ ated disc type brake s that are activated by only one lever . Always test brake lever travel and master cylinder fluid level befo re riding.
38 FEA TURES AND CONTROLS Master Cylinde r/Br ake Fluid Check the brake fluid in the master cylinder before each ride. The fluid level can b e seen through an indicator window on the top of the master cylinder . This eye will appear dark wh en the fluid level is full.
39 FEA TURES AND CONTROLS Pa r k i n g B r a k e Locking the P arking Brake 1. Place the transmission in PA R K . 2. Squeeze and release the brake lever two or three times, then squeeze and hold. 3. Push the parking brake lock forward to engage the lock.
40 FEA TURES AND CONTROLS Auxiliary F oot Brake The auxili ary brake s ystem is intend ed to be used as a backup for the main brake system. Should the main system fail, use the auxiliary foot brake. NOTE: Since this is a rear brake only , it will not be as effective as the all-wheel single lever system.
41 FEA TURES AND CONTROLS Fu e l T a n k C a p Remove the fuel tank cap to add fuel to the fuel tank. Use either leaded or unleaded gaso- line with a minimum pump octane numb er of 87=(R+ M/2) octane.
42 FEA TURES AND CONTROLS Automatic T ransmission Gear Selector The transmission gear selector is located on the right side of the v ehic le. H: High Gear L: Low Gear N: Neutral R: Reverse P: Park Whenever the A TV is left unattended, always place the transmission in P ARK and lock the parking brake.
43 FEA TURES AND CONTROLS Recoil Starter If the battery is too weak to start the engin e, use the recoil starter . Follow the starting procedures on page 59, c ranking the engi ne with the recoil starter instead of the main key switc h. 1. Grasp the recoil starte r rope handle tightly .
44 FEA TURES AND CONTROLS All Wheel Drive System The All Wheel Dr ive s ystem is controlled by the 4X4 switch. ADC 4X4 Mode When the switch is on ADC 4X4, the ADC system allows engine braking to all four wheels when the vehicle descends a hill or incline.
45 FEA TURES AND CONTROLS All Wheel Drive System Engaging 4X4 The 4X4 switch may be turned on or of f wh ile the vehicle is moving. Initially , the vehicle's elect ronic sy stem will not enable 4X4 until the engine RPM is below 3100. Once enabled, 4X4 remai ns enabled until the 4X4 switch is turned of f.
46 FEA TURES AND CONTROLS Active Descent Cont rol (ADC) System The ADC system allows engine brak ing to all four wheels when the vehicle descends a hill or incline.
47 FEA TURES AND CONTROLS Instrument Cluster Y our A TV is equipped with an instrument cluster that senses vehicle speed from the right front wheel. Th e ins trument clu ster measures dis- tance in miles as well as hours of operation. It also includes a reverse speed limiter function that limits th e A TV's speed to approximately 7-9 mph.
48 FEA TURES AND CONTROLS Instrument Cluster Rider Information Center The rider information center is located in the instrument cluster . All seg- ments will light up for 2.
49 FEA TURES AND CONTROLS Instrument Cluster Rider Information Center Standard Mode s Use the MODE button to toggle thro ugh the mo de options. The rev erse override button is also the MODE button. See page 34. NOTE: The transmission cannot be in reverse when using this feature.
50 FEA TURES AND CONTROLS Instrument Cluster Rider Information Center Diagnostic Mode The wrench icon will display when th e gauge is in the diagnostic mode. T o exit the diagnostic mode, turn th e key switch of f and on. An y move- ment of the tires will also cause the gauge to exit the diagnostic mode.
51 FEA TURES AND CONTROLS Instrument Cluster Rider Information Center Diagnostic Mode Battery V oltage Screen V iew this screen to check battery voltage level. T achometer Screen V iew the tachometer to check engine speed. 4X4 Diagnost ic Sc r een The gauge indicates whether or not current is flowing through the all- wheel-drive coil.
52 FEA TURES AND CONTROLS Instrument Cluster Rider Information Center Diagnostic Mode Pr ogrammable service inte rval T o enable or disable the service interval: 1.
53 FEA TURES AND CONTROLS Instrument Cluster Rider Information Center Downloading Codes The EFI diagnostic mode is for informational purp oses only . Please see your Polaris de aler fo r all major repairs. See page 55 for Blink Codes and Failu re Descriptions.
54 FEA TURES AND CONTROLS Instrument Cluster Rider Information Center Downloading Codes Code Definitions Open Load: There is a break in the wires that lead to the item listed in the cha rt (injector , fuel pump , etc.
55 FEA TURES AND CONTROLS Instrument Cluster Rider Information Center Downloading Codes Blink Code F ailu re Description 12 BEGIN SEQUENCE 22 Throttle Position Sensor Low 22 Throttle Position Sensor H.
56 OPERA TION F uel Safety WA RN I N G Gasoline is highly flammable and e xplosive under certain condition s. • Always exercise extreme cautio n whenever handling g asoline. • Always refuel with the engine stopped, and outdoors or in a well ventilated area.
57 OPERA TION Break-In P eriod The break-in period for your new Polaris A TV is the first ten hours of operation, or the time it takes to use the first two full ta nks of gaso line. No single action on your part is as important as foll owing the proce- dures for a proper break-in.
58 OPERA TION Pre-Ride Checklist WA RN I N G If a proper inspection is not done befor e ea ch use, severe injury or death could result. Always in spect the vehicl e before each use to ensure it's in proper operating co ndition.
59 OPERA TION Starting the Engine 1. Position the vehicle on a level surface. 2. Place the transmission in P ARK. 3. Lock the parking b rake. NOTE: The starte r interlock will prevent the engine from starting if the trans- mission is in gear and th e brake is not engaged.
60 OPERA TION Hauling Cargo Y our A TV has been designed to carry or tow a certain amount of load. Always read and understand the load di stribution warning labels on the vehicle, and never exceed the weight capacities outlined in the specifi - cations section of the owner's manual and on the safety decals.
61 OPERA TION Hauling Cargo WA RN I N G Overloading the vehi cle or carrying or towing cargo improperly can alter vehicle handli ng and may cause loss of c ontrol or brake instability , which ca n result in serious injury or death.
62 OPERA TION Driving Safely Driving Procedures 1. W ear protectiv e ridin g ge ar . See pa ge 10. 2. Sit upright with both feet on th e foo trests and both hand s on the handlebars. 3. S tart the engine and allow it to warm up. 4. Shift the transmission into gear .
63 OPERA TION Driving Safely T urning the V ehicle Y our A TV is equipped with a solid rear axle, which drives both rear wheels equally at all times. This means that the wheel on the outside of the turn must travel a greater distance than the inside wheel when turning and the inside tire must slip traction slightly .
64 OPERA TION Driving Safely Driving on Slippery Surfaces Whenever riding on slippery surfaces such as wet trails or loose gravel, or during freez- ing weather , follow these precautions: 1. Slow down wh en enter- ing slippery areas. 2. Engage 4X4 b efore wheels begin to lose traction.
65 OPERA TION Driving Safely Driving Uphill Whenever traveling uphill, follow these precautions: 1. Always move the 4X4 switch to ADC 4X4 before ascending or descending a hill. See page 46. 2. Drive straight uphill. 3. A void steep hills (25 ° maximum).
66 OPERA TION Driving Safely Driving on a Sidehi ll (Sidehilling) Sidehilling can be dangerou s and should be avoided if at all possible. If you encounter a situation where si dehilling is necessary , follow these precautions: 1. Slow down. 2. Shift your weight uphill.
67 OPERA TION Driving Safely Driving Downhill When driving downhill, follow these precautions: 1. Always move the 4X4 switch to ADC 4X4 before ascending or descending a hill. See page 46. 2. Shift your weight uphill. 3. Drive straight downhill. 4. Slow down.
68 OPERA TION Driving Safely T urning Around on a Hill (K - T urn) If the vehicle stalls while climbing a hill, never back it down the hill! Use the K-turn to turn around. 1. S top and lock the parking brake while keeping b ody weight uphill. 2. Always move the 4X4 switch to ADC 4X4 before ascending or descending a hill.
69 OPERA TION Driving Safely Driving Through W ater Y our A TV can operate th rough water with a maximum recom- mended dep t h eq ual to the bot- tom of the footrests. Follow these procedures when operat- ing throug h water: 1. Determine water depths and current before crossing.
70 OPERA TION Driving Safely Driving Over Obstacles Be alert! Look ahead and learn to read the terrain you're traveling on. Be constantly alert for ha zards such as logs, rocks and low hanging branches. WA RN I N G Severe injury or death can result if your vehicle comes in contact with a hidden obstacle.
71 OPERA TION Driving Safely Driving in Reverse Follow these precautions when operating in reverse: 1. Always check for obstacles or people behind the veh i cle. 2. Always avoid bac kin g downhill . 3. Back slowly . 4. Apply the brakes lightly for stopping.
72 OPERA TION Driving Safely P arking on an Incline A void parking on an incline if poss ible. If it's unavoidable, follow t hese precautions: 1. S top the engine. 2. Place the transmission in P ARK. 3. Lock the parking b rake. 4. Always block the rear wh eels on the downhill side.
73 EMIS SION CONTROL SYSTEMS Noise Emission Control System Do not modify the engine, intake or exhaust components, as doing so may af fect compliance with U.S.A. EP A noise control requirements (40 CFR 205) and local noise level requirements. Operation on Public Lands in the U.
74 MAINTENANCE P e ri odic Maintenance Chart Careful periodic maintenance will help keep your vehicle in the safest, most reliable condition. Inspectio n, adjustment and lubrication of important components are explained in the periodic ma in tenance ch art .
75 MAINTENANCE P e ri odic Maintenance Chart Maintenance Chart K ey X Perform these operations more of ten for vehicles subjected to severe use. E Emission-related service (Failure to conduct this maintenance will not void the emissions warrant y but may af fect emissions.
76 MAINTENANCE P e ri odic Maintenance Chart Perform all services at whichever main tenance interval is reached first. X Perform these procedures more often fo r vehicles subjected to severe use. E Emission-Related Service Q Have an authorized Polaris dealer perform these services.
77 MAINTENANCE P e ri odic Maintenance Chart Item Maintenance Interval (whichever comes first) Remarks Hours Calendar Miles (Km) X General lubrication 50 H 3 M 500 (800) Lubricate all fittings, pivots, cables, etc.
78 MAINTENANCE P e ri odic Maintenance Chart X Perform these procedures more often fo r vehicles subjected to severe use. E Emission-Related Service Q Have an authorized Polaris dealer perform these services.
79 MAINTENANCE Lubrication Guide Check and lubricate all components at the intervals outlined in the Periodic Maintenance Chart be ginning on page 74. Items not listed in the chart should be lubr icated at the General Lubrication interval.
80 MAINTENANCE Engine Oil Oil Recommendations Polaris recommends the use of Polaris PS-4 PLUS Performance Syn- thetic 2W -50 4-cycle oil or a similar oil for thi s engine. Oil may need to be changed more frequently if Polari s oil is not used. Always use 2W -50 oil.
81 MAINTENANCE Engine Oil Oil and Filter Change Always change the oil and filter at th e intervals outlined in the Periodic Maintenance Ch art beginni ng on page 74. Alwa ys change th e oil filter whenever ch an ging oil. 1. Position the vehicle on a level surface.
82 MAINTENANCE Engine Oil Oil and Filter Change 10. Reinstall the screen fitting and ro tate the fitting clockwise a mini- mum of 2 1/2 turns into the tank thr eads. Continue to rotate the fit- ting until the nipple of the fitting a ligns with the mark on the tank.
83 MAINTENANCE Engine Oil Oil and Filter Change 17. Reinstall the drain plug.T orque to 14 ft. lbs. (19 Nm). 18. Remov e the dipstick. 19. Add two quarts (1.9 l) of recommended oil. Rein stall the dipstick. NOTE: If the sump is not drained, add abo ut 1 3/4 quarts (1.
84 MAINTENANCE Engine Oil Oil and Filter Change Oil Pump Priming This priming procedure must b e performed whenever the oil hose connection between the oil tank and pump inlet has been disconnected.
85 MAINTENANCE T ransmission Oil Always check and change the transmission oil at the intervals outlined in the Periodic Maintenance Chart be ginning on page 74. Maintain the oil level at the bottom of the fill pl ug hole threads. W e recomme nd the use of Polaris Premium AGL Synthetic Gearca se Lubricant.
86 MAINTENANCE T ransmission Oil Oil Change 1. Remove the fill plug. 2. Place a drain pan under the gearcase. 3. Remove the drain plug. Allow the oil to drain com- pletely . 4. Clean and reinstall the drain plug. T o rqu e to 22 ft. lbs. (30 Nm). 5. Add 32 oz.
87 MAINTENANCE F r ont Gearcase (Demand Drive) Fluid Always check and change the demand drive fluid at the intervals out- lined in the Periodic Maintenance Ch art beginn ing on page 74. W e rec- ommend the use of Demand Drive L T Premium Fluid. Use of o ther fluids may result in improper operati on of components.
88 MAINTENANCE F r ont Gearcase (Demand Drive) Fluid Fluid Check 1. Position the vehicle on a level su rface. Remove t he fill plug. Check the fluid level. 2. Add the recomme nded demand driv e fluid as needed to bring the level to the bottom of the fill hole threads.
89 MAINTENANCE Active Descent Control (ADC) Fluid T wo fluid levels must be maintained on your vehicle, th e demand drive fluid and th e ADC fluid. See page 87 for demand drive fluid mainte- nance. Check and change the ADC fluid level at the intervals outlined in the Periodic Maintenance Chart beginning on page 74.
90 MAINTENANCE Active Descent Control (ADC) Fluid Fluid Change 1. Position the vehicle on a level su rface. Before performing the fluid change, allow the vehicle to sit for at least 30 minutes. 2. Thoroughly clean the areas arou nd and on the ADC reserv oir and bleeder valves (one on each side of the differential).
91 MAINTENANCE Cooling System The engin e coolant le vel is controlled, or main tained, by the recovery system. The recovery system compon ents are the reco very bottle, the radiator filler neck, the radiator pressure cap and the connecting hose.
92 MAINTENANCE Cooling System Radiator Coolant T o ensure that the coolant maintain s its ability to protect the engine, Polaris recommends that you drain the system completely every two years and add a fresh mixture of antifreeze and water . Replace the coolant any time the coo ling system has been drained for maintenance or repair .
93 MAINTENANCE Brakes Hand Brake The front and rear brakes are hydraulic disc brakes, activated by moving the single brake lever toward the handleba r . These brakes are self- adjusting. Under normal operation, the diaphr agm extends into the reservoir as fluid level drop s.
94 MAINTENANCE T oe Alignment Use the following procedure to check the toe alignment of the vehicle. The recommended toe alig nment is 1/8" to 1/4" (3-6 mm) to e out. 1. Position the vehicle on a level surface. 2. Place the ha ndlebars in a straight-ahead positi on.
95 MAINTENANCE Side P anel Removal 1. Remove the seat. 2. Grasp the rear of the side panel near the rear cab. W ith a firm motion, pull the panel outward to disengage the side panel from the grommet. Pull the panel downward and rearward to remove it. 3.
96 MAINTENANCE Steering Assembly The steering assemb ly of the A TV should be check ed periodically for loose nuts and bo lts. If loose nuts and bolts are foun d, see your Polaris dealer for service before ope rating the v ehicle. Tires Refer to the specifications section beginning on page 134 for recom- mended tire type, size and pressure.
97 MAINTENANCE Tires Tire T read Depth Always replace tires when tread depth is worn to 1/8" (3 mm) or less. F ront Wheel Hub Tightening Front wheel bearing tightness and spin dle nut retention are critical com- ponent operati ons. All service must be perfo rmed by your authorized Polaris dealer .
98 MAINTENANCE Tires Wheel Installation 1. Place the transmission in P ARK. 2. Lock the parking b rake. 3. Place the wheel on the hub with the valve stem toward the out side and rotation arrows on the tire pointing toward forward rotation. 4. Install the wheel nuts and finger -tighten them.
99 MAINTENANCE Air Filter 1. Remove the seat. 2. Release the air box cover clips, and remove the air box cover . 3. Loosen the clamp and remove the filter . 4. Remove the fabric type pre- filter from the main filter . W ash the pre-filter in soapy water , then rinse and let dry .
100 MAINTENANCE Breather Filter/Hose The breather filter is on the hose th at runs between the engine and air box. See illustration above. 1. Remove the left side panel. See page 95. 2. Remove the hose clamps from the filter and pull the filter out of the hoses.
101 MAINTENANCE F use Replacement If the engine stops or will not start, or if you experience other electrical failures, a fuse may need replac ement. Locate and correct any short circuits that may have caused the blown fuse, then replace the fuse. NOTE: Spare fuses are provided in a compartme nt on the top of the access door .
102 MAINTENANCE Lights When servicing a ha logen lamp, don't touch the lamp with bare fingers. Oil from your skin leaves a residue, causing a hot spot that will shorten the life of the lamp. Headlight Lamp Replacement 1. Remove the two screws on the lowe r front corners of the headlight pod.
103 MAINTENANCE Lights High Beam Adjustment The headlight beam can be adjusted slightly upward or downward. Use the following procedure to make the adjustment. 1. Position the vehicle on a level su rface with the headlight approxi- mately 25 ft. (7.6 m) from a wall .
104 MAINTENANCE Lights Headlight Housin g Replacement 1. Remove the two screws on the lowe r front corners of the headlight pod. 2. Lift the pod slightly while depressing the tabs at the rear of the pod. 3. Lift the pod cover and disconn ect the speedome ter harnesses from the speedometer .
105 MAINTENANCE Lights Lower Headlamp Replacement 1. T urn the back of the headlight harness counterclockwi se and pull the harness assembly away from the headlight assembly . 2. Remove the head lamp and install the new headla mp. 3. Reinstall the harness assembly into the headlight assembly .
106 MAINTENANCE Spark Plugs Spark Plug Recommendations Refer to the specifi cations sect i on beg inn ing on p age 1 34 for the recom- mended spark plug type and gap fo r your vehicle. T orque spark plugs to specification. Spark Plug Inspection Spark plug condition is i ndicative of engine operat ion.
107 MAINTENANCE Spark Plugs Spark Plug Inspection Normal Spar k Plug The normal insulator tip is gray , ta n or light brown. There will be few combustion deposits. The electrodes are not burned or eroded. This indi- cates the proper type and heat range for the engine and the service.
108 MAINTENANCE V ehicle Immersion 1. If it's impossible to tak e yo ur A TV to a dealer before starting it, fol- low the steps outlined below . 2. Move the A TV to dry land or at t he very least, to water below the footrests. 3. Check the air bo x.
109 MAINTENANCE Spark Arrestor Use the following procedure to peri odically pur ge acc umulated carbon from the exha ust pipe/m uf fler . 1. Remove the arrestor cle an-out plug from the bottom of the muf fler . 2. Place the transmission in PA R K . 3.
110 MAINTENANCE PVT System WA RN I N G F ailure to comply with the instru ctions in this warning can result in severe injury or death. Do not modify any component of the PVT system. Doing so may reduce its strength so that a failu re may occur at a high speed.
111 MAINTENANCE PVT System The basic operation of the Polaris PVT system is dependent on engine speed and vehicle torque requiremen ts. As engine speed increases, the force exerted on the movable drive sheave by the flyweights also increases. This, in turn, increases th e amount of pinch applied to the drive belt.
112 MAINTENANCE PVT System When T o Use Low Range and High Range PVT Drying There may be some instances w hen wate r is accidently ingested into the PVT system. Use the following instructions to dry it out before operat- ing. 1. Position the vehicle on a level surface.
113 MAINTENANCE Battery Y our A TV may have either a sealed battery , which requires little mainte- nance, or a conventional battery . A sealed battery can be identified by its flat covers on the top of t he battery . A conventional battery has six filler caps on the top of the battery .
114 MAINTENANCE Battery Battery Removal 1. Disconnect the battery hold-down strap. 2. Remove the battery cover . 3. On conventional batteries, re move the battery vent tube. 4. Disconnect the black (negative) battery cable first. 5. Disconnect the red (positive) battery cable last.
115 MAINTENANCE Battery Battery Installation Using a new battery that has not been fully char ged can damage the bat- tery and result in a shorter life. It ca n also hinde r vehicle performance. Follow the battery charging instructio ns on page 1 17 before installing the battery .
116 MAINTENANCE Battery Battery Storage Whenever the vehicle is not used for a period of three months or more, remove the battery from the vehicle, ensure that it's fully char ged, and store it out of the sun in a cool, dry place. Check battery voltage each month during s t orag e and recharge as needed to mainta in a full char ge .
117 MAINTENANCE Battery Battery Charging (Conventional Battery) 1. Remove the battery from the vehi cle to preven t damage from le ak- ing or spilled ele ctrolyte during charging. See page 1 14. 2. Char ge the battery with a charging output no lar ger than 1/10 of the battery’ s amp/hr rating.
118 MAINTENANCE Battery Battery Charging (Sealed Battery) NOTE: Always verify battery con dition before and 1-2 hours after the end of charging. State of Charge V oltage Action Charge T ime (Using constant current charger @ standard amps specifi ed on top of batt ery) 100% 12.
119 MAINTENANCE Cleaning and Storage W ash ing the V ehicle Keeping your Polaris vehicle clean will not only improve its appearance but it can also extend the life of various components. The best and safest way to clean your Polaris vehicle is with a garden hose and a pail of mild soap and water .
120 MAINTENANCE Cleaning and Storage W ashing th e V ehicle If a high pressure water system is u sed for cleaning (not recommended), exercise extreme caution.
121 MAINTENANCE Cleaning and Storage Chrome Wheel Care (if equipped) Proper maintenance will protect chrome wheels from corrosion, pre- serve wheel life and ensure a "like new" appearance for many years.
122 MAINTENANCE Cleaning and Storage Storage Tips Clean the Exterior Make any necessary re pairs and clean the vehicle as recommended. Se e page 1 1 9. Stabilize the F uel 1. Fill the fuel tank. 2. Add Polaris Carbon Clean Fuel T r eatment or Polaris Fuel S tabilizer .
123 MAINTENANCE Cleaning and Storage Storage Tips Fluid Levels Inspect the flu id levels. Add or change flui ds as recommended in the Periodic Maintenance Char t beginni ng on page 74.
124 MAINTENANCE Cleaning and Storage Storage Tips Inspect and Lubricate Inspect all cables a nd lubricat e all areas of the vehicle as recommended in the Periodic Maintenance Chart beginn ing on page 74. Battery Storage See pages 1 16-1 17 for storage and charging procedures.
125 MAINTENANCE T ransporting the A TV Follow these procedures when transporting the vehicle. 1. S top the engine. 2. Place the transmission in PA R K . 3. Lock the parking b rake. 4. Secure the fuel cap, oil cap and seat. 5. Always tie the frame of the A TV to the transporting unit securely with suitable straps or ro pe.
126 ADJUSTMENTS Camber and Caster The camber and caster are non-adjustable. Rear Spring The rear shoc k absorber spring is adjusted by rotating the adjuster either clockwise or counterclockwise to increase or decrease spring tension. NOTE: Accessory springs are available through your Polaris dealer .
127 ADJUSTMENTS Handlebars The handlebars can be adjusted for rider preference. 1. Remove the upper headlight pod. 2. Loosen the four hand lebar bolts. 3. Adjust the handlebar to t he desired heigh t. NOTE: Be sure the handlebars do not contact the gas tank or any other pa rt of the machine when turned fully to the left or right.
128 ADJUSTMENTS Throttle Body/Idle RPM Idle RPM is preset by the manufactur er . If the engine idle speed is not satisfactory , please see your Pola ris dealer for adjustment. Throttle Cable F reeplay Adjust throttle cable freeplay at the handlebar . 1.
129 TROUBLESHOOTING Drive Belt W ear/Burn Possible Cause Solution Driving onto a pickup or tall trailer in high rang e Use low range during loading. Starting out going up a steep in cline Use low range or turn around using the K-turn (see page 68).
130 TROUBLESHOOTING Engine Doesn't T urn Over Engine T urns Over , F ails to Start Engine Backfires Possible Cause Solution Low battery voltage Rechar ge the battery to 12.
131 TROUBLESHOOTING Engine Pings or Knocks Engine Runs Irregularl y , Stalls or Misfires Possible Cause Solution Poor quality or low octane fu el Replace w ith recommended fuel Incorrect ignition timi.
132 TROUBLESHOOTING Engine Stops or Loses P ower Engine Overheating Possible Cause Solution Out of fuel Refuel, cycle key to ON position three times for 5 seconds each, then start Kinked or plugged fu.
133 POL ARIS PRODUCTS Pa rt Number Description Engine L ubricant 2870791 F ogging Oi l (12 oz. Aerosol) 2876244 PS-4 PL US P erformance Syntheti c 2W -50 4-Cycle Oil (qt.) 2876245 PS-4 PL US P erformance Synthetic 2W-50 4-Cycle Oil (gal.) Gearcase / T ransmis sion Lubricants 2873602 Premium AGL Synthetic Ge arcase Lubricant (qt.
134 SPECIFICA TIONS * Based on EU Directive 76/432/EC Sportsman 500 EFI Maximum W eight Capacity 485 lbs. (220 kg) Fuel Capacity 4.13 gal. (15.6 l) Engine Oil Capacity 2 qts. (1.9 l) Coolant Capacity 2.7 qts. (2.5 l) Demand Drive Fluid Capacity 9.3 oz.
135 SPECIFICA TIONS Clutching NOTE: *EBS model s require no helix/spring adjustment Sportsman 500 EFI Shift T ype Side Lever (H/L/N/R/P) Gear Reduction, Low 23.91:1 Gear Reduction, Reverse 1 6.30:1 Gear Reduction, Forward 10.49:1 Drive Ratio, Front 3.
136 W A RRANTY LIMITED W ARRANTY Polaris Sales Inc., 2100 Highway 55, Medina, MN 55340, gives a SIX MONTH LIM- ITED W ARRANTY on all components of the Po laris All T errain V ehicle (A TV) against defects in material or work manship . Polaris also gives a one year limited warranty on the final drive chain for failure due to defect s.
137 W ARRANTY W ARRANTY COVERAGE AND EXCL USIONS: LIMIT A TIONS OF W ARR ANTIE S AND REMEDIES The Polaris l imited warranty e xcludes any fa ilu res that are not c aused by a defect in material or workmanship. Th is warranty does not cover acci dental damage, normal wear and tear , abuse or improper handling.
138 W A RRANTY ALL IMPLIED W ARRANTIES (INCLUDING BUT NOT LIMITED T O THE IMPLIED W ARRANTIES OF MERCHANT ABILITY AND FITNESS FOR A P AR- TICULAR PURPOSE) ARE LIMITED IN DURA TION TO THE ABOVE SIX MONTH W ARRANTY PERIOD. POLARIS FUR THER DI SCLAIMS ALL EXPRESS W ARRANTIES NOT ST A TED IN THIS W A RR ANTY .
139 W ARRANTY Exported V ehicles EXCEP T WHERE SPECIFICALL Y REQUIRED BY LA W , THERE IS NO W AR- RANTY OR SER VICE BULLETIN COVERAGE ON THIS VEHICLE IF IT IS SOLD OUTSIDE THE COUNTR Y OF THE SELLING DEALER'S AUTHORIZED LO CA- TION. This policy does not apply to vehicles that have received authorization for export from Polaris Industries.
140 W A RRANTY Exported V ehicles How to Get Service If Purchased From A Pr ivate Party: If you purchase a Polaris product from a private citizen outside of the country in wh ich the vehicle was originally pur chased, a ll warranty coverage will be denied.
141 W ARRANTY U.S.A . EP A Emiss ions Limited W arranty This All T errain V ehicle (A TV) or Off Road Utility V ehicle (ORUV) emissions limited warranty is in addition to the Polaris st andard limited warrant y for this vehicle.
142 MAINTENANCE L O G Present this section of your manual to your dealer each ti me your vehicle is serviced. This will provide you and future owners with an accurate log of maintenance and ser- vices performed.
143 MAINTENANCE L OG DA TE MILES (KM) OR HOURS TECHNICIAN SERVICE PERFORMED / COMMENTS.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Polaris Sportsman 9921477 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Polaris Sportsman 9921477 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Polaris Sportsman 9921477, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Polaris Sportsman 9921477 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Polaris Sportsman 9921477, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Polaris Sportsman 9921477.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Polaris Sportsman 9921477. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Polaris Sportsman 9921477 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
