Manuel d'utilisation / d'entretien du produit DVR-433H-S du fabricant Pioneer
Aller à la page of 119
DVD Recorder DVR-433H-S DVR-433H-K Operating Instructions ® DVR-433H_UK.book 1 ページ ２００５年３月１日 火曜日 午後５時６分.
D3-4-2-1-1_En-A The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (ser vicing) instructions in the literature accompanying the appliance.
W ARNING To prevent a fire hazar d, do not place any naked flame sources (such as a lighted candle) on the equipment. D3-4-2-1-7a_A_En VENTILA TION CAUTION When installing this unit, make sure to leave space around the unit for ventilation to impr ove heat radiation (at least 10 cm at top, 10 cm at rear , and 10 cm at each side).
4 En Contents 01 Before you start Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 What’s in the box . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Putting the batteries in the remote control . . . . . . . .
5 En 11 The Disc Setup menu Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87 Basic settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87 Initialize settings . . . . . . . . . . . . . . . . . . . . . . . . .
Before you start 01 6 En Chapter 1 Before you start Features • HDD recording Record up to 227 hours of video (in MN1 mode) on the internal 80 GB (gigabyte) hard disk (HDD).
Before you start 01 7 En • Optimized recording Optimized recording adjusts the recording quality automatically if a timer recording will not fit onto a disc with the settings that you made.
Before you start 01 8 En What’s in the box Please confirm that the following accessories are in the box when you open it. • Remote control • AA/R6P dry cell batteries x2 • Audio/video cable (r.
Before you start 01 9 En Disc / content format playback compatibility General disc compatibility This recorder is compatible with a wide range of disc types (media) and formats. Playable discs will generally feature one of the following logos on the disc and/or disc packaging.
Before you start 01 10 En WMA (Windows Media Audio) compatibility The Windows Media ® logo printed on the box indicates that this recorder can playback Windows Media Audio content. WMA is an acronym for Windows Media Audio and refers to an audio compression technology developed by Microsoft Corporation.
Before you start 01 11 En * ‘DVD-Video format’ recording: The use of the DVD- Video format for recording on DVD-R and DVD-RW discs is referred to as recording in ‘Video mode’ on Pioneer’s DVD recorders.
Connecting up 02 12 En Chapter 2 Connecting up Rear panel connections 1 AV2/AUTO START REC(INPUT 1/DECODER) AV connector Audio/video input/output SCART-type AV connector for connecting to a VCR, or other equipment with a SCART connector. The input accepts video, S-video and RGB.
Connecting up 02 13 En Extra features for use with compatible TVs When this recorder is connected to a TV that features i/o Link. A, AV Link, T-V Link, EasyLink, MegaLogic, SMARTLINK, Q-Link, DATA LOG.
Connecting up 02 14 En Easy connections The setup described below is a basic setup that allows you to watch and record TV programs, and play discs. Other types of connections are explained starting on the following page. Important • These connections use SCART cables (not supplied).
Connecting up 02 15 En Using other types of audio/video output If you can’t use the SCART AV connector to connect your TV to this recorder, there are standard audio/video output jacks, as well as an S-video and component video output. Using the supplied audio/video cable 1 Connect the VIDEO OUTPUT jack to a video input on your TV.
Connecting up 02 16 En Connecting to a cable box, satellite receiver or digital terrestrial receiver If you have a cable, satellite or digital terrestrial receiver with a built-in decoder, connect it to this recorder and your TV as shown on this page.
Connecting up 02 17 En Connecting an external decoder box (1) If you have an external, dedicated decoder box for your satellite or cable TV system, use the setup described on this page. Important • Do not connect your decoder box directly to this recorder.
Connecting up 02 18 En Connecting an external decoder box (2) If you only have a decoder, connect it to this recorder and your TV as shown on this page. 1 Using the setup on this page you can: • Record scrambled channels received using the recorder’s built-in TV tuner.
Connecting up 02 19 En Connecting to an AV amplifier/receiver To enjoy multichannel surround sound you need to connect this recorder to an AV amplifier/receiver using the digital optical output. In addition to a digital connection, we recommend also connecting using the stereo analog connection for compatibility with all discs and sources.
Connecting up 02 20 En Connecting other AV sources Connecting a VCR or analog camcorder 1 Connect a set of audio and video inputs of your VCR or camcorder to a set of outputs on this recorder. This enables you to record from this recorder to your VCR or camcorder.
Controls and displays 03 21 En Chapter 3 Controls and displays Front panel 1 STANDBY/ON Press to switch the recorder on/into standby. 2 Disc tray 3 DISC NAVIGATOR/TOP MENU Press to display the Disc Navigator screen, or the top menu if a DVD-Video disc is loaded.
Controls and displays 03 22 En Remote control 1 STANDBY/ON Press to switch the recorder on/into standby. 2 HDD/DVD (page 27) Press to select the hard disk (HDD) or DVD for recording or playback. 3 HELP Press for help on how to use the current GUI screen.
Controls and displays 03 23 En REC MODE (SHIFT + ) (page 39) Press repeatedly to change the recording mode (picture quality). / Press to skip to the previous or next title/chapter/ track/folder; or to display the previous or next menu page.
Controls and displays 03 24 En Display 1 Lights during playback; blinks when playback is paused. 2 Lights when copying. 3 Lights during recording; blinks when recording is paused.
Getting started 04 25 En Chapter 4 Getting started Switching on and setting up When you switch the recorder on for the first time, you can make several basic settings using the Setup Navigator feature. This takes you through setting the clock, the internal TV tuner and the video output settings.
Getting started 04 26 En • Use the / buttons to choose your country, then press ENTER. • Auto-tuning channels The Auto Scan option automatically scans and sets the channel presets. • Downloading channels from your TV Use the Download from TV option to download all the channels that your TV is tuned to.
Getting started 04 27 En Use the / buttons to move from one field to another. • You can go back to the previous screen at anytime in the Setup Navigator by pressing RETURN . 7 Select the TV screen type, ‘Wide (16:9)’ or ‘Standard (4:3)’.
Getting started 04 28 En Making your first recording This quick guide shows you how to make a basic recording of a TV program on either the HDD, or to a recordable DVD. Recording is covered in much more detail in chapter 5 ( Recording ). 1 If they aren’t already on, switch on your TV and this recorder.
Getting started 04 29 En Using the built-in TV tuner Changing TV channels There are three different ways to select TV channels. Note that you can’t change the TV channel during playback, recording or during recording standby.
Getting started 04 30 En Switching between TV and DVD When the recorder is stopped or recording you can choose whether to have the audio/video from the built-in TV tuner (or external input) play on your TV (‘DVD mode’), or watch the channel that the TV is currently set to (‘TV mode’).
Getting started 04 31 En Basic playback This section shows you how to use your recorder for playback of discs (DVD, CD, etc.), and for playback of video from the HDD. More playback features, such as repeat and program play, are covered in Playback on page 53.
Getting started 04 32 En Playing DVD discs The table below shows the basic playback controls for DVD-Video, and recordable DVD discs. Playing from the HDD The table below shows the basic playback controls when playing video recorded on the hard disk (HDD).
Getting started 04 33 En Playing CDs and WMA/MP3 discs The table below shows the basic playback controls for audio CDs 1 , and WMA/MP3 files. Playing Video CD/Super VCDs The table below shows the basic playback controls for Video CD/Super VCDs. Some discs feature Playback Control (PBC for short) menus.
Getting started 04 34 En Using the Home Menu From the Home Menu screen you can access all the features of the recorder. Note that some options in the Home Menu may be grayed out sometimes, indicating that they are not available at the present time.
Getting started 04 35 En HDD and removable disc activity display Press DISPLAY ( SHIFT + HELP ) once to see the HDD and removable disc (DVD, etc.) activity. Use the HDD/DVD button to switch between the two kinds of display. The example displays below show high-speed copying from HDD to DVD, and HDD chase playback.
Getting started 04 36 En Play display 1 1 Number of chapters in title 2 Current title and chapter number (For CD/Video CD/Super VCD, shows current track; for WMA/MP3, shows current folder and track; for JPEG disc, shows current folder and file.
Recording 05 37 En Chapter 5 Recording About DVD recording This recorder can record on both DVD-R and DVD-RW media. The main difference between the two is that DVD-R discs can only be recorded once, while DVD-RW can be recorded, erased and re-recorded many times.
Recording 05 38 En Recording time and picture quality There are six preset recording quality modes 1 : • XP – High quality setting, gives about one hour of recording time on a DVD disc. • SP (Standard Play) – Default quality, used for most applications, gives about two hours of recording time on a DVD.
Recording 05 39 En Setting the picture quality/recording time Before starting a recording, you will usually want to set the picture quality/recording time. There are six standard settings available, which allow you to choose a balance between picture quality and recording time.
Recording 05 40 En 4 Use the AUDIO (SHIFT + 1) button to select the audio channel to record. See Changing audio channels on page 29 for more on this. • When recording in VR mode, if a broadcast is bilingual, both audio channels are recorded, allowing you to switch the audio channel on playback.
Recording 05 41 En Setting a timer recording Using the timer recording features you can program up to 32 timer recordings up to a month in advance. Timer recording programs can be set to record just once, every day, or every week.
Recording 05 42 En Easy Timer Recording As the name suggests, Easy Timer Recording makes setting up a timer recording as simple as possible. 1 Press HOME MENU, select ‘Timer Recording’, then ‘Easy Timer’. 2 Set the TV channel and recording quality.
Recording 05 43 En 6 Press ENTER to set the end time. 7 Select ‘Yes’ to set the timer recording and exit, or ‘No’ to go back to the timer recording screen. Timer recording using the VIDEO Plus+® programming system This system makes programming timer recordings very simple.
Recording 05 44 En VIDEO Plus+ programming with the power off You can enter a PlusCode programming number when the recorder is in standby. Note that the recording is always made to the HDD. If you want to record to a DVD disc, you’ll need to switch on the power and use the full VIDEO Plus+ program screen.
Recording 05 45 En 2 Select ‘New Input’ to set a new timer program, then press ENTER. 3 Enter the timer recording settings. Use the / buttons to select a field; use the / buttons to change the value. • CH – Choose a channel (Pr 1–Pr 99, excluding skip channels), or one of the external inputs from which to record.
Recording 05 46 En • If the HDD is being used for playback or high-speed copying when an Auto Replace Recording is due to start, the new timer recording will not replace the old one. However, the next time the timer recording starts, both of the older two programs will be erased.
Recording 05 47 En Canceling and stopping a timer recording in progress After a timer recording has started, you can cancel the program (but continue recording), or stop recording completely if you need to. 1 During timer recording, press and hold REC for three seconds.
Recording 05 48 En Simultaneous recording and playback A feature called Chase Play makes it possible to watch a recording in progress (DVD or HDD) from the start of the recording (as in, playback is ‘chasing’ the recording).
Recording 05 49 En Check that the Audio In settings for External Audio , Bilingual Recording and DV Input are as you want them (see Audio In Settings on page 94). • If the aspect ratio is distorted (squashed or stretched), adjust on the source component or your TV before recording.
Recording 05 50 En Recording from a DV camcorder You can record from a DV camcorder connected to the DV IN jack on the front panel of this recorder. Using the recorder’s remote, you can control both the camcorder and this recorder. Before recording, make sure that the audio input for the DV IN jack is setup (see DV Input on page 95).
Recording 05 51 En • Depending on your camcorder, you can use this recorder’s remote to control the camcorder using the , , , , , / and / buttons. 7 Use the / buttons to select ‘Start Rec’ and press ENTER.
Recording 05 52 En 2 Press HOME MENU and select ‘Disc Setup’. 3 Select ‘Finalize’. 4 Select ‘Finalize’ from the finalize options, then ‘Next Screen’. 5 For Video mode discs only, select a title menu style, then select ‘Yes’ to start finalization or ‘No’ to cancel.
Playback 06 53 En Chapter 6 Playback Introduction Most of the features described in this chapter make use of on-screen displays. Navigate these using the /// and ENTER . To go back one level from any screen, use the RETURN button. Remember also that the button guide at the bottom of every screen shows which buttons do what.
Playback 06 54 En 1 During playback, use the number buttons to input a track number. For example, for track 6, press 6 ; for track 24, press 2 , then 4 . • To clear and start again, press CLEAR . 2 Optionally: Press ENTER. • Alternatively, just wait a few seconds and playback will jump to the new track.
Playback 06 55 En • Sort Order – Sort by date (most recent first), unwatched first, title name or recording date (oldest first) • Genre – Display all genres or just a selected genre 3 Use the / buttons to select an option, then press ENTER.
Playback 06 56 En Scanning discs You can fast scan discs at various speeds, forwards or backward. 1 1 During playback, press or to start reverse or forward scanning. • The scanning speed is shown on-screen. 2 Press the same button repeatedly to increase the scanning speed.
Playback 06 57 En Frame advance/frame reverse You can advance or back up video on a DVD disc or the HDD frame-by-frame. With Video CD/Super VCDs, you can only use frame advance. 1 1 During playback, press . 2 Press / or / to back up or advance one frame.
Playback 06 58 En A-B Repeat The A-B Repeat function allows you to specify two points (A and B) within a track or title that form a loop which is played over and over. 1 1 During playback, select ‘A-B Repeat’ from the Play Mode menu. 2 With ‘A (Loop Start)’ highlighted, press ENTER at the point you want the loop to start.
Playback 06 59 En Program play This feature lets you program the play order of titles/ chapters 1 /folders/tracks on a disc or the HDD. 1 Select ‘Program’ from the Play Mode menu. 2 Select ‘Input/Edit Program’ from the list of program options.
Playback 06 60 En Tip • To save your program list and exit the program edit screen without starting playback, press HOME MENU . • You can change the program list by selecting Input/ Edit Program from the Play Mode Program menu. • During program play, press to skip to the next program step.
Playback 06 61 En Switching DVD soundtracks When playing a DVD disc recorded with two or more soundtracks (often in different languages), you can switch the soundtrack during playback. 1 Check the disc packaging for details of the soundtrack options. • Press AUDIO (SHIFT + 1) repeatedly to select an audio soundtrack.
Playback 06 62 En • 1 Stereo – Soundtrack 1 / Stereo (default) • 1 L – Soundtrack 1 / Left channel • 1 R – Soundtrack 1 / Right channel • 2 Stereo – Soundtrack 2 / Stereo • 2 L – S.
Copying and back-up 07 63 En Chapter 7 Copying and back-up Introduction Use the copying features of this recorder to: • Back up important recordings stored on the HDD to a DVD. • Make a DVD copy of a recording on the HDD to play in another player.
Copying and back-up 07 64 En Canceling One Touch Copy You can cancel a One Touch Copy once it’s started. • Press and hold ONE TOUCH COPY for more than a second. Copying is canceled and the video already copied is erased. • If you cancel a HDD to DVD-R copy, the space available for recording does not return to the pre- copy figure.
Copying and back-up 07 65 En 2 Select ‘HDD DVD’. If this is the first time to create a Copy List, skip to step 4 below. 3 If there is already a Copy List stored in the recorder, choose whether to ‘Create New Copy List’ or ‘Use Existing Copy List’.
Copying and back-up 07 66 En 7 Select ‘Next’ to move on to the Title Edit screen. 8 To edit a title, highlight it using the / buttons, then press ENTER. A menu of editing commands appears: • Erase – Erase individual titles from the Copy List (see page 67).
Copying and back-up 07 67 En Copying from DVD to HDD Important • The DVD to HDD Copy screen isn’t accessible when a finalized Video mode disc is loaded. However, you can still use the One Touch Copy function (See One Touch Copy on page 63). • The recorder can only store one Copy List at a time.
Copying and back-up 07 68 En • Select CAPS or small to change to upper or lower- case, or use the CASE SELECTION buttons ( / ). • You can also use the CLEAR button to delete characters directly (press and hold for two seconds to delete the whole name).
Copying and back-up 07 69 En Preview Use this command to check what’s in a title. 1 Highlight the title you want to preview. 2 Select ‘Preview’ from the command menu panel. The selected title starts to play. Use any of the usual playback controls to scan, skip, play in slow-motion, etc.
Copying and back-up 07 70 En • Video Mode Compatible Editing – Edit points cannot be set with absolute precision, but high- speed copying to Video mode DVD will be possible. • Frame Accurate Editing – Exact edit points are preserved, but high-speed copying to Video mode DVD will not be possible.
Copying and back-up 07 71 En When you change the recording mode setting, you can see how much disc space it will require. If this is more than is available, it shows up in red and you won’t be able to start copying.
Copying and back-up 07 72 En 6 Select ‘Start’ to start writing the backed-up data to the blank disc. • To see the progress of the back-up, press DISPLAY ( SHIFT + HELP ). • You can cancel the back-up process by pressing ONE TOUCH COPY for more than one second.
Editing 08 73 En Chapter 8 Editing The Disc Navigator screen The Disc Navigator screen is where you can edit video content on unfinalized Video mode and VR mode DVD discs 1 , as well as video content on the internal hard disk drive.
Editing 08 74 En Command menu panel options The table below shows which commands you can use with which video type. Editing accuracy Some editing (and Copy List) commands ask you whether you want to keep Video mode compatibility or frame accuracy ( Video mode compatible editing , or Frame accurate editing ).
Editing 08 75 En Create Play List only Use this function to create a Play List and add titles to it. Before you can use this command, make sure that the Play List Pis switched on in the view options panel on the left. 1 Select ‘Create’ from the command menu panel.
Editing 08 76 En 3 Input a name for the selected title. • Use the /// and ENTER to select characters. •A name generated automatically by the recorder will already be in the name input section of the screen. Use the / buttons to change the cursor position.
Editing 08 77 En 3 Use the playback controls ( , , , , etc.) to find a suitable frame, then press ENTER to set. You can also use the CM SKIP ( SHIFT + ) buttons.
Editing 08 78 En • Frame Accurate Editing – Exact edit points are preserved, but high-speed copying to Video mode DVD will not be possible. • For more information about these options, see Editing accuracy on page 74 4 Use the playback controls ( , , , , etc.
Editing 08 79 En Set Genre Use this command to assign a genre to a title. 1 Highlight the title you want to assign a genre to. 2 Select ‘Edit’ > ‘Set Genre’ from the command menu panel. 3 Use the / buttons to select a genre for the title, then press ENTER.
Editing 08 80 En Combine Play List only Use this function to combine two Play List titles into one. 1 Highlight the title you want to combine. This title will remain in the same place after combining with another title. 2 Select ‘Edit’ > ‘Combine’ from the command menu panel.
Editing 08 81 En 3 Select ‘Next’ from the command menu panel. 4 Select the command that you want applied to all the marked titles. For example, select Erase to erase all the marked titles. Once the command is completed, Multi-Mode is automatically exited.
Using the Jukebox 09 82 En Chapter 9 Using the Jukebox The Jukebox feature allows you to use the recorder’s HDD to store and playback music from up to 999 of your CDs. Once on the HDD, you can name albums, assign them a genre, and set tracks that you don’t want to play to Jump.
Using the Jukebox 09 83 En Playing music from the Jukebox You can select albums or individual tracks from the Jukebox to play. 1 1 Press Home Menu and select ‘Jukebox’. The album list is displayed. 2 Use the / buttons to select the album you want to play and press ENTER.
Using the Jukebox 09 84 En Changing the album view 1 From the album list, press to display the view options menu panel. 2 Select the view option you want, then press ENTER. • Display order New First – Most recently copied CDs appear at the top of the album list.
The PhotoViewer 10 85 En Chapter 10 The PhotoViewer From the PhotoViewer you can view JPEG photos and picture files stored on a CD-ROM/R/RW 1 on your TV. Playing a slideshow 1 Press HOME MENU and select ‘PhotoViewer’ to display the PhotoViewer screen.
The PhotoViewer 10 86 En Reloading files from a disc If you have a disc with a large number of files and/or folders, you can still view all the images using the reload function. 1 Use the button to navigate to the last entry in the folder list (‘Read next: .
The Disc Setup menu 11 87 En Chapter 11 The Disc Setup menu Introduction From the Disc Setup menu you can name discs, lock the contents to prevent accidental recording and erasure, initialize and finalize discs. The Disc Setup menu is accessed from the Home menu: • Press HOME MENU and select ‘Disc Setup’.
The Disc Setup menu 11 88 En New DVD-R discs are ready for Video mode recording when you load them, but it is also possible to initialize them for VR mode recording. The initialize menu here lets you reinitialize a disc, for example if you want to change the recording format of the disc.
The Video/Audio Adjust menu 12 89 En Chapter 12 The Video/Audio Adjust menu Using the Video/Audio Adjust menu you can set up the picture quality for the built-in tuner and external inputs, for disc playback, and for recording.
The Video/Audio Adjust menu 12 90 En • White AGC – Turn on for automatic white level adjustment. 1 • White Level – Adjusts the intensity of white. • Black Level – Adjusts the intensity of black. • Black Setup – Corrects the standard reference black level (NTSC video input only).
The Video/Audio Adjust menu 12 91 En • Black Level – Adjusts the intensity of black. • Black Setup – Corrects the standard reference black level (NTSC video playback only). • Gamma Correction – Adjusts the brightness of darker images. • Hue – Adjusts overall balance between red and green.
The Initial Setup menu 13 92 En Chapter 13 The Initial Setup menu Using the Initial Setup menu The Initial Setup menu is where you can set various recorder options for sound, picture, language and so on. Some settings can only be changed when the recorder is stopped.
The Initial Setup menu 13 93 En T uner Settings Auto Channel Setting Auto Scan Select your countr y and then wait for the recorder to auto tune into channels in your area. After auto scan has finished, the channel map- ping screen appears showing which channels have been assigned to which program numbers.
The Initial Setup menu 13 94 En Component Video Out Interlace • Select if your monitor/TV is not compatible with progressive-scan video. Progressive Select if your monitor/TV is progressive-scan compatible. Check the operating instructions that came with your monitor/TV if you’re not sure.
The Initial Setup menu 13 95 En Bilingual Recording A/L • Record the left (A) channel of a bilingual source when recording to HDD with HDD Recording F ormat set to Video Mode ON, to DVD in Video mode or in LPCM mode, from an external source. B/R As above, but for right (B) channel recording.
The Initial Setup menu 13 96 En Language Settings OSD Language English • Sets the language of the on-screen displays to English. available languages Choose from the languages displayed for the on-screen displays. Audio Language English • Sets the default audio language for DVD-V ideo playback to English.
The Initial Setup menu 13 97 En Recording Settings Manual Recording On (go to setup) All the standard recording modes, plus MN1 – 32 , LPCM and XP+ modes can be set. Off • Just the standard recording modes ( XP , SP , LP , EP , SLP and SEP ) can be set.
The Initial Setup menu 13 98 En Still Picture Field P roduces a stable, generally shake-free image. Frame P roduces a sharper image, but more prone to shake than Field stills. Auto • The recorder automatically selects Field or F rame type still, according to the material playing.
The Initial Setup menu 13 99 En Additional information about the TV system settings About the input line system This recorder is compatible with PAL, SECAM, 3.58 NTSC and PAL-60 TV systems. The Input Line System and Input Colour System settings determine how the recorder treats incoming video signals from an external input or the built-in TV tuner.
The Initial Setup menu 13 100 En Selecting other languages for language options 1 Select ‘Other’ from the language list. This option appears in the settings for DVD Menu Language, Audio Language, and Subtitle Language. 2 Select the language you want.
Additional information 14 101 En Chapter 14 Additional information Screen sizes and disc formats When viewing on a standard TV or monitor Screen format of disc Setting Appearance 16:9 4:3 (Letter Box) The program is shown in widescreen with black bars at the top and bottom of the screen.
Additional information 14 102 En Minimum copying times The table below shows the minimum HDD to DVD copying time for one hour of video. Please note that not all discs are compatible with high-speed copying. 1 Check with the disc manufacturer for compatibility.
Additional information 14 103 En Troubleshooting Incorrect operation is often mistaken for trouble and malfunction. If you think there is something wrong with this component, please check the points below. Sometimes the trouble may lie in another component.
Additional information 14 104 En The picture fr om the external input is distorted • If the video signal from the external component is copy-protected, you cannot connect via this recorder . Connect the component directly to your TV . The picture is distorted • Change the Input Line System setting (page 99).
Additional information 14 105 En If the unit does not operate normally due to external effects such as static electricity, disconnect the power plug from the outlet and insert again to return to normal operating conditions.
Additional information 14 106 En • Can I use high-speed copy to copy from DVD to HDD? You can only use high-speed copy from DVD to HDD when copying Original titles from a VR mode DVD-R or DVD-RW disc.
Additional information 14 107 En Manual recording modes The table below shows the approximate recording times for a VR mode and Video mode DVD in each manual recording mode, as well as the standard recording mode equivalents. Levels separated by a bold line show where there is a noticeable change in picture quality.
Additional information 14 108 En Language code list Language (Language code letter), Language code Country/Area code list Country/Area, Country/Area code , Code letter Japanese (ja), 1001 English (en).
Additional information 14 109 En On-screen displays and recorder displays The table below shows a list of error messages that you may encounter when using the recorder and an explanation of their meaning. Message Explanation/Action • Initializing disc.
Additional information 14 110 En • There is no DV input or the input signal is unr e- cordable. • Cannot preview because ther e is no DV input or the input signal is unrecor dable. No signal was detected at the DV IN jack. This may appear if a blank section of DV tape is playing in the connected camcorder .
Additional information 14 111 En Resetting the recorder If you need to, you can reset the recorder to all its factory settings. 1 Make sure that the recorder is on. 2 Press and hold and press STANDBY/ON. The recorder turns off with all settings reset.
Additional information 14 112 En Hints on installation We want you to enjoy using this unit for years to come, so please bear in mind the following points when choosing a suitable location for it: Do... Use in a well-ventilated room. Place on a solid, flat, level surface, such as a table, shelf or stereo rack.
Additional information 14 113 En Glossary Analog audio An electrical signal that directly represents sound. Compare this to digital audio which can be an electrical signal, but is an indirect representation of sound. See also Digital audio . Aspect ratio The width of a TV screen relative to its height.
Additional information 14 114 En MPEG audio An audio format used on Video CDs and some DVD discs. This unit can convert MPEG audio to PCM format for wider compatibility with digital recorders and AV amp/receivers. See also PCM . MPEG video The video format used for Video CDs and DVDs.
Additional information 14 115 En Specifications General System . . . . . . . . . . . . . . . . . . HDD, DVD-Video, DVD-R/RW, Video-CD, Super VCD, CD, CD-R/RW (WMA, MP3, JPEG, CD-DA) Power requirements . . . . . . . . . . . . . . . 220–240 V, 50/60 Hz Power consumption .
Additional information 14 116 En Component video output Output level . . . . . . . . . . . . . . . . . . . . . . . . Y: 1.0 Vp-p (75 Ω ) P B , P R : 0.7 Vp-p (75 Ω ) Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . RCA jacks RGB input Input level .
118 En Index A Audio digital output settings 95 DV audio settings 50 dynamic range control 91 external audio settings 94 input settings 94 setting preferences for audio language 96 switching on playba.
119 En M MP3 audio files 9 , 113 MPEG audio 114 N NexTView 13 NTSC 24 O Optimized recording 45 P Picture quality recording time vs 38 , 107 setting for playback 90 setting for recording 89 Play List c.
PIONEER CORPORATION 4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan PIONEER ELECTRONICS (USA) INC. P.O. BOX 1540, Long Beach, California 90810-1540, U.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Pioneer DVR-433H-S c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Pioneer DVR-433H-S - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Pioneer DVR-433H-S, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Pioneer DVR-433H-S va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Pioneer DVR-433H-S, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Pioneer DVR-433H-S.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Pioneer DVR-433H-S. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Pioneer DVR-433H-S ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
