Manuel d'utilisation / d'entretien du produit PowerLight 1250 du fabricant Photogenic Professional Lighting
Aller à la page of 20
1 P OWER L IGHT Operator’s Manual PowerLight 1250 PowerLight 1250DR PowerLight 2500DR & Remote Control Accessories Unit Number Assignment, Page 14 PLDIR-2 and PLDIR-1 Remote Digital Display, Pag.
2 OPERATOR MANUAL FOR MONOLIGHTS PowerLight 1250 PowerLight 1250DR PowerLight 2500DR OPERATOR MANUAL FOR ACCESSORIES PLDD-1 side display for model PL1250 only. PLDC-1 side display/manual controller for “DR” models. PLDIR-2 side display & IR receiver for “DR” models.
3 SAFETY PRECAUTIONS Despite the measures that have been taken to make electronic flash equipment safe, it must be recognized that high voltages and high temperatures do exist within the power supply / lighting unit. Certain precautions must be observed in handling the unit.
4 Unpacking and Setup: (continued) The unit is shipped with the modeling lamp and flashtube not installed. While installing the modeling lamp and flashtube (with glove or clean cloth to protect the hand) be sure they are properly inserted and tight to avoid arcing and failure of the socket contacts during operation.
5 CONTROL PANEL AND BASIC OPERATION: Power Input: The power required to operate the PowerLight 1250, 1250DR or 2500DR is 105 to 125 volts AC, 60 Hz, 10 Amp. The power cord has a 125V, 10 Amp. rating. Replacement cords or extension cords rated for less amperage may overheat and should not be used with PowerLights.
6 Power Switch: The power switch controls the AC power to both the modeling and flash circuits. You have the option to turn-off the modeling circuit independently. PowerLight Model PL1250 Flash Power: All settings and controls of the PowerLight 1250 are extremely stable and repeatable due to the use of an internal microcomputer.
7 Modeling Light: The modeling light has three modes of operation: 1. MANUAL adjustment [press the MANUAL button, LED on] adjusts the modeling lamp intensity with the MODEL slide control knob. As with flash power, minimum setting is full left and maximum setting is full right.
8 PowerLight Models 1250DR and 2500DR Flash Power: Use the Adjust button to turn on the Flash ws red LED. Adjust the PowerLight 1250DR or 2500DR Flash power setting using the 1/2 or 1/10 f-stops UP/DOWN arrow buttons. Ready Light: The PowerLight 2500DR is fully charged when the READY lamp is on.
9 PowerLight Models 1250, 1250DR and 2500DR Test Function: The TEST button is pressed to fire the flashtube for test purposes. Flash Indication: The PowerLight indicates the flash has fired properly. The flash indication feature will dim the modeling light to its lowest setting, then intensify slowly to full brightness or to its original state.
10 OPERATION PowerLight Model 1250 and 1250DR Flashing Rate: The unit recharges quickly, as indicated by the READY light on the control panel. A quick series of flashes can be obtained within the limits of the recharge time. Continuous rapid flashing, however, can overheat and damage the flashtube and internal parts.
11 SPECIFICATIONS PL1250 & PL1250DR General: Flash Power....................................................16 to 500 watt-seconds. maximum (6 f-stops) Flash Duration................................................1/1300 second at Full 1/640 second at 1/32 Recycling time.
12 OPERATION PowerLight Model 2500DR Flashing Rate: The unit recharges quickly, as indicated by the READY light on the control panel. A quick series of flashes can be obtained within the limits of the recharge time. Continuous rapid flashing, however, can overheat and damage the flashtube and internal parts.
13 SPECIFICATIONS PL2500DR General: Flash Power................................................ 32 to 1000 watt-seconds maximum. (6 f-stops) Flash Duration............................................ 1/770 second at Full 1/345 second at 1/32 Recycling time.
14 ADVANCED POWERLIGHT FEATURES. Models PL1250, PL1250DR, and PL2500DR Automatic Dump Flash This feature will automatically flash the unit when the FLASH setting is lowered; otherwise, the internally stored power is discharged through a resistor, before the unit is READY .
15 Advanced PL2 series Accessories. PLDD-1 Digital display for Model 1250 only. The PLDD-1 is a digital display to enhance the resolution and repeatability of the Model 1250’s Flash analog slide-pot control. It displays only Flash power, over the full range of 16 to 500 watt-seconds.
16 Advanced PL2 series Accessories. PLIRC-1 Infrared remote controller for models 1250DR and 2500DR. (must be used with PLDIR-1 receivers) Similar to TV, VCR, DTV universal remote controllers, the PLIRC-2 can control up to nine (9) PowerLights with individual settings.
17 POWERLIGHT QUICK CHANGE ACCESSORIES REFLECTORS: PL7R 7 1/2” Standard high grain reflector. 35 degree coverage. PL14R 14” Parabolic for portraits, feathering, flood and fill lighting. 60 degree coverage. PL16R 16” Parabolic for portraits, feathering, flood and fill lighting.
18 POWERLIGHT QUICK CHANGE ACCESSORIES UMBRELLAS: EC32BC 32” White satin flat panel inner umbrella with black blocking outer umbrella. EC45BC 45” White satin flat panel inner umbrella with black blocking outer umbrella. EC60BC 60” White satin flat panel inner umbrella with black blocking outer umbrella.
19 General Trouble Shooting COMMON PROBLEMS AND CAUSES Unit does not charge. Probable causes: a. Fuse blown. (Unplug and discharge the unit-Replace fuse.) b. No line power to unit. (Check line cord and outlet.) c. Unit is on, but will not charge. (Safety thermal detector activated by heavy use, beyond specified Flashing Rates on page 9.
20 Limited PowerLight Warranty Photogenic Professional Lighting warranties the “standard line” of new PowerLight products to be free from defects in material and workmanship of the PL2 series of PowerLights for a period of two years from date of purchase.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Photogenic Professional Lighting PowerLight 1250 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Photogenic Professional Lighting PowerLight 1250 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Photogenic Professional Lighting PowerLight 1250, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Photogenic Professional Lighting PowerLight 1250 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Photogenic Professional Lighting PowerLight 1250, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Photogenic Professional Lighting PowerLight 1250.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Photogenic Professional Lighting PowerLight 1250. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Photogenic Professional Lighting PowerLight 1250 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.