Manuel d'utilisation / d'entretien du produit A01-AU1 du fabricant Atlantis Land
Aller à la page of 61
I-Storm USB ADSL modem A01-AU1 Manual for Linux and Mac OS 9/X A01-AU1_ME01.
I-Storm USB ADSL modem SOMMARIO Chapter 1 ............................................................................. 1 1.1 I-Storm USB ADSL Modem Features ...................... 1 1.2 Package Contents................................................
4.2.4 Configuration – DNS Configuration ................ 44 4.2.5 System – Password Configuration.................... 45 4.2.6 System – Diagnostic Test ................................. 45 4.2.7 System – System Log ............................
.
I-Storm USB ADSL modem 1 Chapte r 1 Introduction 1.1 I-Storm USB ADSL Modem Features I-Storm US B ADSL Modem provides the followi ng features: ♦ Bus-powered US B modem for broa dband ADSL. ♦ Downstream data r ate up to 8 Mbps a nd upstre am up to 1 Mbps.
I-Storm USB ADSL modem 2 3. One RJ-11 ADS L telephone cable 4. One USB cable 5. One Qu ick Start Gu ide 1.3 The Front LEDs LED Meaning USB When this LED is lit, it indicates that the USB port is connected t o the PC and working pr operly. DATA Flashes when transferring data.
I-Storm USB ADSL modem 3 PPPoE VPI/VCI, VC-based/LLC-based multiplexing, Username , Passwo rd, Servi ce Name, a nd Dom ain Name System (DNS) IP ad dress (it can be automatically a ssigned f rom ISP or be se t fixed).
I-Storm USB ADSL modem 4 Chapte r 2 Installation 2.1 Installing I-Storm USB ADSL Modem Please refer to the following instructions: 1. Connect ADSL telephone cable to th e LINE RJ-11 jack. 2. Connect the USB cable to th e USB port and con nect the other end to th e PC.
I-Storm USB ADSL modem 5 2. In the next window, select “Search for the best driver for your device” and click “Next >”. 3. Insert the installation CD into the CD-ROM drive and check “ Specify a l ocation”.
I-Storm USB ADSL modem 6 ADSL W AN Ada pter. ( Please refer Information from ISP section for mor e details.) Click “OK” and then “Next>” to continue.
I-Storm USB ADSL modem 7 4. Continuing th rough the Wiz ard, click the “Next >” button. Win dows will start copying files to your system. Then, click “ Finish”. 5. You will see the f ollowing screen pr ompting for the path of the Windows source files.
I-Storm USB ADSL modem 8 6. I-Storm USB ADS L Modem driver is successfully installed and the Status Task Bar will a ppear in the System Tray . 7. I-Storm USB ADSL Modem icon is installed in the Control Panel.
I-Storm USB ADSL modem 9 2. Insert the installation CD into the CD-ROM drive and check “Specify a l ocation”. Click “Br owse…” to specif y the driver directory such as CDRom:DriverLAN for installing I-Storm USB ADSL LAN Adapter or CDRom :DriverWAN for installi ng I-Storm USB ADSL WA N Adapter.
I-Storm USB ADSL modem 10 3. Continuing thr ough the Wizard, Windows will start copying files to your system. Then, click “Finish”. 4. I-Storm USB ADSL Modem driver is successfully installed and the Status Task Bar will a ppear in the System Tray .
I-Storm USB ADSL modem 11 6. Go to the Device Manager , the “ I-Storm USB ADSL LAN Adapter ” is under the Network Adapters, and “ I-Storm USB ADSL M odem ” is under the Universal Serial Bus Con trolle rs for I-Sto rm USB ADSL LAN driver installati on.
I-Storm USB ADSL modem 12 ROM drive. In next w indow, check “Specify a location” and click “Next>”. 3. Click “Browse…”. In the Locate File window, specify the driver directory such as.
I-Storm USB ADSL modem 13 4. When windows titled “Digital Signature Not Found” appear, press “Y es” to co ntinue the installation. 5. Press “Finish”. 6. I-Storm USB ADS L Modem driver is successfully installed and the Status Task Bar will a ppear in the System Tray .
I-Storm USB ADSL modem 14 7. I-Storm USB ADSL Modem icon is installed in the Control Panel. 8. Go to the Device Manager , the “ I-Storm USB ADSL LAN Adapter ” is under the Network Adapters, and “ I- Storm USB ADSL Modem ” is under th e Universal Serial Bus Con trolle rs for I-Sto rm USB ADSL LAN driver installati on.
I-Storm USB ADSL modem 15 2. Insert the installation CD into the CD-ROM drive and select “Include this locati on in the search”. Click “Browse” to specify the dr iver directory such as CDRom:Driv erLAN for instal ling I-Storm USB ADSL LAN Adapter or CDRom:Dr ive rWAN for insta lling I-Storm USB ADS L WAN Adapter.
I-Storm USB ADSL modem 16.
I-Storm USB ADSL modem 17 3. When windows t itled “Hardware Installation” or “Software Install ation” appe ar, press “Continue Anyway” to go on.
I-Storm USB ADSL modem 18 5. Wait a few moments. Windows will show that the new device, I- Storm USB ADSL LAN (or WAN) Adapter, has been detected. Select “Insta ll from a list or specific location”. Click “Next >” 6. Click “Next >” w hen the following figur e appears.
I-Storm USB ADSL modem 19 8. Then, cl ick “Finish” to end th e installation. 9. I-Storm USB ADS L Modem driver is successfully installed and the Status Task Bar will a ppear in the System Tray . 10. I-Storm USB ADSL Mo dem icon is installed in the Control Panel.
I-Storm USB ADSL modem 20 “ I-Storm USB ADSL Modem ” is under the Universal Serial Bus Controllers for I-Sto rm USB ADSL WAN driver installation. 2.2.5 F or Mac OS 9 If you connect the AD SL Modem/Ro uter through USB port, for the first time the USB cable is connected to the PC, the host PC O S will automatically detect the device.
I-Storm USB ADSL modem 21 2.2.6 For Mac OS X 1. Insert the installation CD in to the CD- ROM drive, click the driver installer. 2. Input the user nam e and pa ssword of your Mac system.
I-Storm USB ADSL modem 22 4. Select a destination to install the driver, c hoose Mac X. 5. Click “C ontinue”..
I-Storm USB ADSL modem 23 6. Click “ Continue Inst allatio n ” to end the installation. 2.2.7 For Linux Redhat 7.1/7.2 1. Install the driv er (Redha t 7.
I-Storm USB ADSL modem 24 #rpm –i US B-RED-HAT-7. 1.i386.rpm (Redhat 7.2) #rpm –i US B-RED-HAT-7. 2.i386.rpm (Redha t 8.0) #rpm –i US B-RED-HAT-8. 0.i386.rpm (Redha t 9.0) #rpm –i US B-RED-HAT-9. 0.i386.rpm 2. Launch the driver #cd /usr/local /e2 #insmod e2.
I-Storm USB ADSL modem 25 Chapter 3 Configuration Windows Follow the instructions below to conf igure your I-Storm USB ADSL Modem. 1. Click I-Storm USB ADSL Modem i c o n i n t h e Control Pane l or ADSL Configuration icon on the desktop. The status of AD SL connection will be displayed.
I-Storm USB ADSL modem 26 2. Press [Alt]+[P] on keyboard, the following f igure appear s..
I-Storm USB ADSL modem 27 3. Select the Protocol S etup tag, please set the value of “VPI”, “VCI” and “Encapsulation Mo de”. Then, click “OK”.
I-Storm USB ADSL modem 28 3.1 I-Storm USB ADSL LAN(RFC1483, RFC1577) 3.1.1 For Windows 98 / Me 1. Go to Start / S ettin gs / Control Panel . In th e Control Panel, double- click on Network and choose the Configura tion tab. 2. Select TCP/IP → I-Storm USB ADSL LAN Adapter .
I-Storm USB ADSL modem 29 4. Select the Gateway tab. Enter the “gat eway” provided by your ISP and click Add ..
I-Storm USB ADSL modem 30 5. In t he DNS Configuratio n page. Click the Ena ble DNS radio button. Enter the “Host” name and “DNS Server IP address” provided by your ISP.
I-Storm USB ADSL modem 31 3.1.2 For Windows 2000 / XP 6. Go t o Start / Settings / Con trol Panel . In the Control Panel, double- click on Network and Dial-up Connections . 7. Right–click on Local A rea Connection that is using the I- Storm USBA DSL LAN Adapter and then click “Properties”.
I-Storm USB ADSL modem 32 8. Select Internet Protocol ( TCP/IP) . Then, click “Pro pert ies”. 9. Select Use the follo wing IP address , and then enter the “IP address”, “Subnet mask”, and “Default gateway” pr ovided by yo ur ISP. Select Use the following DNS server addresses and then ent er the provided DNS server IP add ress.
I-Storm USB ADSL modem 33 3.2 I-Storm USB ADSL WAN(PPPoA, PPPoE) 1. Click ADSL Easy Dia lup ic on on the des ktop. Then, the following window ap pears. Enter the “U sername” and “P asswor d” provided by your I SP. Let the Pho ne number f ield be blank.
I-Storm USB ADSL modem 34 2. Click Connect and get ready to surf the Internet!.
I-Storm USB ADSL modem 35 Chapiter 4 Mac OS9,X and Linux The ADSL USB Modem can be config ured with your web browser , the default IP address of the ADSL USB Modem is 192.
I-Storm USB ADSL modem 36 4.1 Factory Default Settings Before you conf igure this de vice, you need to know the following default settings. 1. Web Configurator User Name Password Administrator admin password 2. Device IP Network se ttings in LAN site IP Address: 192.
I-Storm USB ADSL modem 37 4.2 Configuring with Web Browser The ADSL USB Modem can be configur ed with your Web browser. Open the web browser, enter the lo cal port IP address of the ADSL Router, which default at 192 .168.1. 254 , and click “ Go ” to get the login page.
I-Storm USB ADSL modem 38 Then, click “OK” to log in. You can modify the pass words for security and mana gement purpose. At the config uration hom epage, the left naviga tion pane w here bookmarks ar e provided li nks you di rectly to the desir ed setup page.
I-Storm USB ADSL modem 39 Status – PPP Displays the st atus PPP fo r each PPP interfa ce..
I-Storm USB ADSL modem 40 4.2.2 Configuratio n – WAN Configuratio n The screens below contain se ttings for the WAN int erface toward Internet. • VPI: Consult the telephon e compan y to get the Virtual Path Identifier (V PI) number. The default valu e is 0.
I-Storm USB ADSL modem 41 ENCAPSULATION There are eleven ways ─ PPPoE VC -Mux, PPPoE LLC, PPPoE None, PPPoA VC-Mu x, PPPoA LLC , 14 83 Bridged IP VC-Mux, 1483 Bridged IP LLC, 1483 Routed IP VC-Mux, 1483 Routed I P LLC, Classic al IP over ATM, Native ATM ─ for the device to have a public I P address a nd then to access Internet.
I-Storm USB ADSL modem 42 • Automatic Reconnec t: Check to enable this device to automatically re-establish the PPPoE session when disconnected by ISP. • PPP connect on WAN access: Check to enable this device to automatically re-establish the PPP oE session when ever there is WAN access traffic, e.
I-Storm USB ADSL modem 43 • IP Addre ss: Def ault at 192. 168.1.25 4. This is the device IP address in LAN site. If you plan to change it to another IP address to a different r ange of IP subnet. Please make sure your PC is also located at the same IP sub net.
I-Storm USB ADSL modem 44 4.2.4 Configuratio n – DNS Configuration A Domain Name S ystem (DNS) contains a mapping table f or domain name and IP ad dress. In the Intern et, every ho st has a unique and frien dly name such as www.ya hoo.co m and I P address.
I-Storm USB ADSL modem 45 4.2.5 System – Password Configur ation In factory setting, the default password for admin istrato r is password, and that for user is a lso password. You can change the default password t o ensure that someone canno t adjust your settings without your permission.
I-Storm USB ADSL modem 46 Chec king LAN Connectio n Testin g Ethernet LAN connect ion This test passes if the Ethernet LAN interface is working properly.
I-Storm USB ADSL modem 47 This test checks your DSL modem to see if it can successf ully negotiate and establish a DSL connection with your ser vice provider's central office equipmen ts. The test returns PASS if a DSL connection is established. If this te st r eturns FAIL, please try the te st again a few minutes after this test is completed.
I-Storm USB ADSL modem 48 If this test return FAIL consiste ntly and your DSL modem seems not working, check to make s ure the VPI and V CI are configured correctly.
I-Storm USB ADSL modem 49 If this test retur ns FAIL, run this test again a f ew minutes after this test is completed. If this test returns FAIL consistently and DHC P client is turned on in your DSL modem, check with your service provider.
I-Storm USB ADSL modem 50 This test returns SKIPPED if "IP connect to PPP" or "IP connect to Ethernet" test does not re turn PASS. 4.2.7 System – Sys tem Log Display the system logs cum ulate d till the present time. You can trace the historical information thro ugh this function.
I-Storm USB ADSL modem 51 4.2.8 Advanc e – WAN Status Each VC setting you enabled in the WAN Configuration section except that uses the PPP encapsulat ion wil l be displayed in this table.
I-Storm USB ADSL modem 52 4.2.10 Advance – TCP Status Display the status of TCP. This screen will automatically refresh every two seconds..
I-Storm USB ADSL modem 53 4.2.11 Advance – ADSL Configuration • Trellis: Default at Enabled . • Hands hake Prot ocol: Default at Auto sense – G.dmt fi rst . You can also choose othe r protocols, such as Auto sense – T1.413 first , G.dmt/G.lite , T1.
I-Storm USB ADSL modem 54 4.2.12 Sav e Settings Click the Submit button to write settings to flash. Then, the system will rebo ot for changes to take eff ect.
I-Storm USB ADSL modem 55.
I-Storm USB ADSL modem 56 APPENDIX Product Support If you have any problems w ith the I-Storm USB ADSL Modem, please contact the dealer w here you bought th is product.
I-Storm USB ADSL modem 57.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Atlantis Land A01-AU1 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Atlantis Land A01-AU1 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Atlantis Land A01-AU1, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Atlantis Land A01-AU1 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Atlantis Land A01-AU1, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Atlantis Land A01-AU1.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Atlantis Land A01-AU1. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Atlantis Land A01-AU1 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
